YASKAWA V1000 Inverter cimr-vc4a0001baa

YASKAWA V1000 Inverter cimr-vc4a0001baa


The Yaskawa V1000 is a general-purpose AC drive covering the demands of a wide
field of applications including Open-Loop-Vector functionality and the use of
PM motors without feedback.


Email: anna@cwlyautomation.com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: Hongkong CW Green Tech Company

High flux braking for 50% reduction of braking time
Online Auto-Tuning to optimize for improved motor performance at low speed
Open Loop Vector Control for PM motor operation
Safe Disable Inputs for Safe Torque OFF

Email: anna at cwlyautomation dot com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: Hongkong CW Green Tech Company


Technical Details
INPUT POWER SUPPLY
400 V
RATED OUTPUT CURRENT (HD)
1.2 A
RATED OUTPUT CURRENT (ND)
1.2 A
OVERLOAD TOLERANCE (ND)
120% for 60 s
OVERLOAD TOLERANCE (HD)
150% for 60 s
MAX. APPLICABLE MOTOR POWER (HD)
0.37 kW
MAX. APPLICABLE MOTOR POWER (ND)
0.37 kW
INPUT POWER PHASES
3-phase
MOTOR TYPE
Permanent magnet motor, Induction motor
STANDARDS COMPLIANCE
cUL, CE, RoHS, UL, UKCA
AMBIENT TEMPERATURE (MIN)
-10 °C
AMBIENT TEMPERATURE (MAX)
50 °C
MAX. HUMIDITY (NON-CONDENSING)
95 %
MAX. ALTITUDE (WITHOUT DERATING)
1000 m
MAX. ALTITUDE (WITH DERATING)
3000 m
HEIGHT
128 mm
WIDTH
108 mm
DEPTH
81 mm
WEIGHT
1 kg
COOLING METHOD
Coldplate, Air cooling
ENCLOSURE
IP20/UL Open Type
ENVIRONMENTAL SPECIFICATIONS
Standard
ANALOG INPUT
2
ANALOG OUTPUT
1
DIGITAL INPUT
6
DIGITAL OUTPUT
3
SAFETY LEVEL
SIL2
PERFORMANCE LEVEL
PL d
TORQUE CONTROL
Not available
BRAKING TRANSISTOR
External
MOTOR THERMAL PROTECTION
Standard
MAX OUTPUT FREQUENCY
400 Hz

Email: anna at cwlyautomation dot com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: Hongkong CW Green Tech Company



Details
Yaskawa V1000 Series AC Inverter for 0.2kW (0.25HP) 400V 3ph motor to 1.2A at
high overload or 0.4kW (0.5HP) to 1.2A when Fan/Pump rated. Operates in VxF or
Sensorless Vector control and converts fixed frequency Three Phase 400V input
to variable frequency Three Phase 400V for a standard AC Induction motor. This
is a fanless design for quiet operation.

Size 2A: 108mm wide x 80mm deep x 128mm high. IP20
Weight: 1kg.

Overload: 150% x 60 seconds. High Overload.
Overload: 120% x 60 seconds. Fan/Pump Rated.
Speed Control Range: 0.01-400Hz.
Braking - 100% Torque x 12 seconds every 120 seconds to 750 Ohm Minimum, 1200
Ohm Maximum external resistor (not supplied) - see the Resistor options linked
below or use the 'Which Resistor' button on this page..

2 x Analogue Input, 1 x Analogue Output, 6 Digital Inputs, 1 Pulse Input,1
Pulse Output, 1 Relay Contact set.
'Safe Torque Off' (STO) function to SIL 2.
Input Current: 1.2A at High Overload, 1.2A when Fan/Pump rated.
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%
EMC Filters: None (see linked products below for external filter)

Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified], Ventilation space above and below:
100mm, Ventilation space at sides: 30mm (2mm when drives mounted side by side).
Heat Loss at max output: 30.7W.
Mounting via 4 x M4 bolts (not supplied) at rear on 96mm x 118mm centres.

Manufacturer part number is CIMR-VC4A0001BAA.

Email: anna at cwlyautomation dot com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: Hongkong CW Green Tech Company


Excellent motor drive performance:
A1000 and V1000 are both compact size inverter drives
running induction motors with an output frequency
between 0.0 and 1000.0 Hz.
A1000 also runs permanent magnet motors (open loop).
Built-in functional safety features:
The implemented Safe Torque Off (STO) function replaces
output contactors and signifi cantly improves machine
safety and reliability and provides substantial cost
reduction potentials.
Easy integration of PLC functionality:
DriveWorksEZ creates a custom drive functionality with just
some mouse clicks and by fast and intuitive programming.
Space saving and compact set-up:
Outstanding power to size ratio and gapless side-by-side
installation reduce the mounting space to a minimum.
Reliable operation:
Long life design for 10 years of maintenance-free
operation.
Fast Acceleration / Deceleration
High peak current capability for rapid start and stop.
Time required for tool changes at spindles is minimised
increasing the time-effi ciency of machine cycles.

Yaskawa V1000 Series AC Inverter for 0.2kW (0.25HP) 400V 3ph motor to 1.2A at
high overload or 0.4kW (0.5HP) to 1.2A when Fan/Pump rated. Operates in VxF or
Sensorless Vector control and converts fixed frequency Three Phase 400V input
to variable frequency Three Phase 400V for a standard AC Induction motor. This
is a fanless design for quiet operation.

Email: anna at cwlyautomation dot com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: Hongkong CW Green Tech Company

Size 2A: 108mm wide x 80mm deep x 128mm high. IP20
Weight: 1kg.

Overload: 150% x 60 seconds. High Overload.
Overload: 120% x 60 seconds. Fan/Pump Rated.
Speed Control Range: 0.01-400Hz.
Braking - 100% Torque x 12 seconds every 120 seconds to 750 Ohm Minimum, 1200
Ohm Maximum external resistor (not supplied) - see the Resistor options linked
below or use the 'Which Resistor' button on this page..

2 x Analogue Input, 1 x Analogue Output, 6 Digital Inputs, 1 Pulse Input,1
Pulse Output, 1 Relay Contact set.
'Safe Torque Off' (STO) function to SIL 2.
Input Current: 1.2A at High Overload, 1.2A when Fan/Pump rated.
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%
EMC Filters: None (see linked products below for external filter)

Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified], Ventilation space above and below:
100mm, Ventilation space at sides: 30mm (2mm when drives mounted side by side).
Heat Loss at max output: 30.7W.
Mounting via 4 x M4 bolts (not supplied) at rear on 96mm x 118mm centres.

Manufacturer part number is CIMR-VC4A0001BAA.

Minimum Order: 1 pairs