Without Holding Brake Plug Set MR-CCN1 Motor Part For Servo Amplifier

Brand: Mitsubishi
Product Name: plug set model: mr-ccn1
Content: servo amplifier connector.
Purpose: for mr-je-b input and output signals. Motor series: low inertia, small
capacity. Use serial pair / incremental encoder. Rated output power: 0.1kw.
Rated speed: 3000rpm. With or without holding brake: without holding brake.
Without GB.
Shaft end: straight shaft Mitsubishi mr-ccn1.
The rotor inside the servo motor is a permanent magnet. Unw two-phase
electricity controlled by the servo amplifier forms an electromagnetic field.
The rotor rotates under the action of this magnetic field. At the same time,
the motor and its own encoder feed back signals to the driver. The driver
compares the feedback value with the target value and adjusts the rotation
angle of the rotor mr-ccn1
The accuracy of servo motor depends on the resolution of encoder. Servo motor
series: medium inertia, small capacity. Rated output: 7.0kw. Rated speed: 2000r
/ min
Electromagnetic braking: without Mitsubishi mr-ccn1 oil seal: attached (Note 1,
note 2, note 3). Power supply: 200V.
Note 1 It can be supported by hg-kr and hg-mr series above 0.1kw and hg-sr
series. Note 2 With reducer, oil seal is not equipped.
Note 3 The boundary dimension standards of hg-kr and hg-mr series servo motors
with oil seal are different. Realize the stable driving of medium capacity and
medium inertia products.
Through Jiahua structural design, Mitsubishi mr-ccn1 is realized. High speed &
high torque. Shorten positioning time and realize high-speed equipment. Reduce
power on torque ripple.
By combining the number of poles and slots of Jiahua motor, the power on torque
ripple is greatly reduced, and the smooth and constant speed operation of the
equipment is further realized.
To improve the environmental resistance, hg-sr and hg-jr series products adopt
IP67. Servo motor series: low inertia, medium and large capacity. Rated output:
9.0KW Mitsubishi relay connector kit. Rated speed; 3000r/min。 Electromagnetic
braking: without. Power supply: 200V.
Suitable for high frequency operation or high acceleration and deceleration
operation of medium, large capacity and low inertia products. To improve the
environmental resistance, hg-sr and hg-jr series products adopt IP67. High
speed & high torque. Shorten positioning time and realize high-speed equipment.
In 100 sites, there are 100 different drive controls. In order to meet
diversified and detailed site needs as much as possible,
In the configuration of mr-j4 product line, the main rich co service amplifier
and co service motor product Mitsubishi relay connector kit are provided, which
can meet the different needs of different customers. Servo motor series: medium
inertia, small capacity. Rated output: 0.85kw.
Rated speed: 1000r / min Mitsubishi relay connector kit. Electromagnetic
braking: without. Power supply: 200V.
Realize the stable driving of medium capacity and medium inertia products.
Through optimized structural design, the small total length in the industry is
realized,
High speed & high torque, shorten positioning time, realize high-speed
equipment and reduce power on torque ripple.
By combining the number of poles and slots of Jiahua motor, the torque ripple
of power on is greatly reduced, and the smooth and constant speed operation of
the equipment mr-ccn1 is further realized.
To improve the environmental resistance, the series products of hg-sr and hg-jr
adopt IP67 Mitsubishi mr-ccn1. Length of line: 10M. IP grade: IP65. Direct
connection type.
The cable is unshielded. Bending life: standard.
Connector kit for motor electromagnetic brake.
Cable for electromagnetic brake: used for hf-kp / hf-mp series (led out from
the same side of motor shaft).

Minimum Order: 1 pairs

Click to Enlarge