Wholesale Price Cars Trucks TC Oil Seal 38*61*10

　　The TC oil seal is a contamination-resistant shaft seal consisting of a
single rubber-coated metal cage, a primary and secondary sealing lip with
integrated spring.

　　Most industries use oil seals primarily to keep grease in a specific
housing or housing. These are effective methods of filling gaps between
stationary and moving parts of various machines and mechanical equipment. This
barrier effectively protects the machine from dangerous impurities and dirt
while preventing lubricant leakage.

　　These dynamic seals are widely used for low pressure lubricants and high
speed rotating shafts. When bearings are used to support a rotating shaft, oil
seals are used to keep lubricating fluid in the system and keep contaminants
out. A rubber elastomer attached to the metal housing or container provides
these durability with its garter springs to help keep the lip on the shaft.
These are usually placed next to the bearings to seal out or out of various
gases, liquids or solids that a particular mechanism will encounter in
operation. The oil seal is also available as split type, which is easy to
install and effectively reduces downtime by preventing mechanical disassembly.
These come in single or double lip varieties and are recommended for horizontal
shafts.

　　The TC oil seal is a double-lip radial seal equipped with a garter spring,
which can operate at low pressure to prevent the entry of impurities. The
rubber coating enhances the

　　The sealing ability. The inner surface of the stainless steel case is
partially coated with rubber. The auxiliary sealing lip protects against
contamination and dust with an additional dust lip. You can use this seal in
contaminated environments. A proper lubricant should be used between the two
sealing lips to maximize performance over the life of the seal.

　　In mechanical equipment, oil seals (also known as grease, fluid, or dirt
seals) seal the gap between stationary and moving parts to help stop lubricants
from evaporating. In addition, they prevent dangerous impurities from entering
the machine, especially under harsh conditions. Oil seals are vital components
of nearly any type of operating machine or vehicle, protecting a wide variety
of well-engineered, tight-fitting ball, sleeve and roller bearings.

　　Advantages of TC oil seal:

　　1. Excellent static sealing.

　　2. Extremely effective thermal expansion compensation.

　　3. Allow the shell to have greater roughness to reduce the risk of rust.

　　4. Low-viscosity and high-viscosity fluid seals.

　　5. The currently used main sealing lip has a small radial force.

　　6. Protection from unwanted air pollutants.

　　To keep the oil in the rotating shaft equipment while preventing the
ingress of dirt, dust, water or any other contaminants, seals are suitable.
They are often used to protect the bearings of rotating shafts.

　　Nitrile rubber is referred to as nitrile rubber (NBR). The substance has
excellent engineering qualities as a universal sealing lip material.

　　Advantages of NBR material:

　　1. Outstanding wear resistance and good resilience

　　2. Good elongation and tensile strength

　　3. Excellent resistance to animal and vegetable oils

　　4. Strong fuel and oil resistance

　　5 Excellent water resistance

　　Advantages of FKM materials:

　　1. Excellent high temperature resistance

　　2. Excellent wear resistance

　　3. Excellent oil resistance

　　4. Excellent weather resistance

　　5. Excellent ozone resistance

　　6. Excellent water resistance

Minimum Order: 10 pieces

Click to Enlarge