Wax Emulsion

Emulsion wax is a multi-phase emulsion in which materials such as natural wax
and synthetic wax are dispersed in water under the action of an emulsifier. The
production method is mainly a phase inversion emulsification method.

We, being one of wax emulsion manufacturers, can offer many kinds of paraffin
wax emulsion, such as Wax Emulsion KH PWE 35S,KH PWE 50S and KH PWE 60S. They
have been welcomed in the market for their outstanding performances. We, as one
of paraffin wax manufacturers in china and suppliers, will surely offer you
satisfying products, please feel free to contact us.

Wax Emulsion Types in King Honor International
Paraffin Wax Emulsion PWE 35S
Paraffin Wax Emulsion PWE 50S
Paraffin Wax Emulsion PWE 50SA
Paraffin Wax Emulsion PWE 60S

Wax Emulsion Formulation
Wax emulsion is a kind of emulsion of multiphase system, which is dispersed in
water by emulsifying agent, such as natural wax and synthetic wax. Emulsion wax
can be stored in a cool place for two years. Emulsified paraffin diluted with
any proportion of water has the characteristics of no stratification, no
demulsification, no caking, long shelf life, high solid content and good
dispersion. In the pre vulcanization process of manufacturing latex gloves or
in the gluing mixing tank, emulsified paraffin can be added in the amount of
1.5 ~ 2.5, which can improve the anti viscosity of the mold and be easy to
demould the gloves. In some formulations of emulsion, adding emulsified
paraffin can improve the performance of latex.

The Difference Between Paraffin Wax Emulsion and Polyethylene Wax Emulsion?
Paraffin Wax emulsion and Polytethylee wax emulsion are different.The
advantages of paraffin wax emulsion are: resistance to acid and alkali, no
agglomeration, and good dispersibility. The advantages of polyethylene wax
emulsion are: wear resistance, softness, surface lubrication and so on. 1. In
the application of PVC pipes, if paraffin wax is used as a lubricant, because
the softening point of paraffin wax is relatively low, but the dispersibility
is not good, the paraffin wax is liquefied during the production process, which
is what we often call evaporation. It's clean. This will cause the finished PVC
pipes or profiles to have a poor brightening effect, and there will be many
stains on the surface, and the anti-sticking effect is poor. The polyethylene
wax emulsion can perfectly solve this problem. 2. In the field of planting.
Paraffin wax emulsion would be a good choice.

What is Wax Emulsion Used For?
Wax emulsion uses are of a wide range, as follows:

The low melting point wax can give the leather surface a waxy feel, moderately
seal the grain surface and improve the accumulation of the skin, and prevent
sticking to the board during ironing or embossing. A wax emulsion with a higher
melting point can impart high gloss, can be polished, has better transparency,
and can be used for aniline finishing.

Die-casting release agent, the paper wax emulsion can shorten the release
cycle, improve production efficiency, reduce waste generated in the production
process, reduce energy consumption, and extend the service life of the mold. At
the same time, the wax emulsion can also be used as a lubricant to reduce the
incidence of porosity in castings, extend the plunger, reduce the influence of
friction, and increase the spray speed, so that the surface of the castings
does not leave oil marks and is cleaner and brighter.

Wax emulsion is used as a textile auxiliary. It plays an indispensable role in
improving the product quality and added value of textiles. Wax emulsion can not
only give textiles various special functions and styles, such as softness,
anti-wrinkle, antibacterial, antistatic, flame retardant, etc. but also improve
the dyeing and finishing process, save paper energy and reduce processing
costs.

polyethylene wax emulsion can be combined with a fatliquoring agent. It has
been proved by experiments that the addition of 1% to 5% wax emulsion to
leather fatliquoring agent can improve the filling performance of fatliquoring
agent, improve the permeability of fatliquoring agent in leather fiber,
increase the waterproof property of leather, make leather feel smooth, soft and
plump. polyethylene emulsion used in the construction industry: used as a
curing agent for reinforced concrete. In the curing process of concrete, if the
water on the surface evaporates too fast, a series of chemical reactions can
not be completed in the solidification process, and the maximum compressive
strength of the surface can not be achieved. Therefore, excessive evaporation
of water must be prevented during concrete curing. Therefore, the industry has
developed a film curing agent with emulsified wax as the basic raw material,
which avoids unnecessary surface water evaporation and promotes the hydration
of cement.pe wax emulsion is used for wood waterproofing: the emulsified wax is
evenly coated on the surface of waterproofing wood by soaking or spraying.
Because of the fine particle size of emulsified wax, it can naturally penetrate
into the interior of the wood, and the effect of waterproofing can be achieved
by drying.

If you want to know more about wax emulsion manufacturing process, please
contact us.

Minimum Order: 1 metres

Click to Enlarge