Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray)

JOEO Walk In Salt Spray Chamber is different from basic salt spray test
chamber.Walk In Salt Spray Chamber exposes sample to a series of different
environments in repetitive cycles that incorporate temperature , humidity, salt
spray and dry. 
Accelerated corrosion test methods included ASTM B117, ASTM BG85, ISO9227,
IEC60068-2-52, iec61701-2, ISO7253 and many others.
Test Object: battery pack andsystem.
Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test
conditions.If you need more models about our test equipment, please reference
our chamber-testing（.）com
The salt solution was made up with sodium chloride (chemically pure and
analytically pure) and distilled or deionized water，Its concentration is (5 +
1)% (mass fraction).
(35 ± 2) ℃, the measured pH value is between 6.5-7.2.
Placed the test objects in the salt spray chamber for cycling test. Each
cycling duration for 24h. Spray salt solution to the test object for 8 hours
under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth
and the fifth hour in one cycles should be according to test requirement in
GB/T 28046.1-2011, test mode with 3.2.
Total 6 cycles testing.
Salt Spray Chamber is not necessary for the test objects being installed in
passenger, luggage or cargo compartments.

Minimum Order: 1 pieces

Click to Enlarge