Unnoted Round Corner R0.5 Tungsten Carbide Processing , Tungsten Steel Wind

PRODUCT DESCRIPTION


Unnoted Round Corner R0.5 Tungsten Carbide Processing , Tungsten Steel
Winding Head





Introduction:



We can produce the non-standard carbide winding sleeve according to the
drawings of the automatic winding equipment.





Technical parameters:



The tungsten steel winding head is mainly used for the production and
processing of enameled wire winding, requiring long-lasting service life,
wear resistance and durability. High wear resistance is the basic
requirement for mold products, especially for the long-term operating
mechanical equipment such as progressive molds, combined molds and multi-
station molds. The cemented carbide mold materials have the excellent
performance of long-lasting operation. As a tool material, cemented carbide
is a good choice for mold products due to its high hardness, high strength
and high wear resistance. According to the actual production operation, we
can provide tungsten steel mold parts non-standard customization, according
to the customer's specific drawing and confirming the accuracy tolerance.



The tungsten steel winding head is produced and processed according to the
drawings. There are 6 special requirements:

If the dimensional tolerances are not noted, we will produce in accordance
with GB/T1804-f. And if the geometric tolerances are not noted, we will
produce in accordance with GB/T1184-h.
The outer surface roughness of the cemented carbide parts is Ra0.025, the
roughness of the wire hole is Ra0.1, and the hole radius is R0.15.
Unnoted round corner: R0.5.
There are 20 wire holes of φ0.65, and the distance between them is 1.05mm,
Hard alloy material hardness: HRA90
Tungsten steel material bending strength: 2300N/mm²
Among them, the 20 through-holes have higher processing precision
requirements. They must be consistent, and the operation is fixed according
to the four internal thread positioning holes on both sides Every procedure
of cemented carbide precision machining needs to be strict and careful, to
avoid scrapping of carbide products.





Advantage:



As a wear-resistant industrial metal, cemented carbide is effective
manufacturing tool. As a cemented carbide manufacturer, relying on the
cemented carbide production technology and complete industrial chain in
Zhuzhou, with professional production equipment and rich experience, we
provide customers with high-quality carbide mold parts, wear-resistant
parts, non-standard shaped carbide products. Based on customer's drawing and
selecting high-quality materials, we are willing to satisfy customers'
demand to the utmost extent.

Click to Enlarge