Tungsten wire

Tungsten wire
Quick Details
Place of Origin: Henan, China (Mainland)
Brand Name: Kekai
Model Number: W1
Wire Gauge:0.01- 2mm
Material: tungsten
Chemical composition: tungsten
Purity: >99.95%
Applications: special applications
Appearance: coiled
Dia.: 0.01-2.00mm
Density: 19.2g/cm3
Melting Point: 3410 Celsius
Boiling Point: 5927 Celsius
Surface: Black and Cleaned
.Packaging & Delivery
Packaging Details: plastic inside and wooden case outside
Delivery Detail: 7-15days
1. Tungsten wire tungsten Filament: tungsten wire in spool
Model NO.: KK
Type: Tungsten Wire
Material: W-1
Purity: 99.95%Min.
Melting Point: 3410 Ceiclus
Boiling Point: 5927 Ceiclus
Density: 19.2g/cm3
Diameter: 0.01-2.00mm
Surface: Black and Cleaned
Export Markets: Global
2. Dimensions and Tolerances of tungsten wire:
Tungsten wires diameters are generally expressed in terms of inches or mils
(thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in
diameter, the diameter of the wire is measured by weight per unit length. That
is, the weight expressed in mg of a 200 mm length of wire.
The standard diameter tolerance is: ± 3% of the weight measurement. Closer
tolerances are available, depending upon the application for the wire product.
Specification:
Diameter, mm Difference between 2 feet, mm Inside diameter tolerance, mm
Big heater element Small heater element
0.4-3.0 ±1 ±0.3
0.4-1.0 ±1 ±0.3
0.4-1.3 ±1 ±0.3
0.4-1.0 ±2 ±1 ±0.3
0.4-1.0 ±1 ±0.3
0.4-1.0 several stranded coils ±0.3
Note: Different diameter and length are available for your 99.95% pure stranded
tungsten wire.
3. Straightness of tungsten wire:
Wire may be finished in the unstraightened or as drawn condition and is
controlled to Bango's internal standards, In addition, wire can be straightened
via mechanical or heat treating processes. Typically, the measure of the
straightness of a tungsten wire is obtained by cutting a ten inch long piece of
wire and allowing it to lie on a flat clean surface. The maximum deviation from
a straight line along its length is the quantitative measure of its
straightness. In general, as the degree of straightness increases, tensile
strength decreases.
4. Quality and Finish:
Wire is free of scratches, kinks and distortions insofar as they are harmful to
the intended end use of the product. Surface finish is supplied in the black,
as drawn condition, where drawing lubricants and oxides are retained on the
surface, or in the cleaned condition by firing in hydrogen or electrochemical
etching.
5. Products Feature:
1. Excellent Conductivity
2. Resistance of high temperature.
3. Abrasion and Erosion.
4. Suitable for making heating wires.
5. Twisted wires for coating films under vacuum and for tungsten wires in
electrical light sources usage.
6. Application:
Tungsten is widely used as refractory metals. In wire form, tungsten wire is
essential for the production of lighting products and other goods where its
high temperature properties are of use. Among its properties are a melting
point of 3410° C, a low coefficient of thermal expansion and low vapor
pressure at elevated temperatures along with good electrical and thermal
conductivity.
The important applications of tungsten wire are for the production of coiled
incandescent lamp filaments, cathode and support structures for power tubes,
heating elements for high temperature furnaces and evaporation sources in
metallizing processes. Thicker sizes of tungsten wire, straightened, finish-
ground and cut into rod pieces are widely used for glass-to-metal seal lead
parts in the lighting and electronic industries.
7. Technical process:
Tungsten Powder → Isostatic Pressing → Bar Billet →Sintering → Semi-
finished bar →Forging→ Swaging → Drawbench → End products → Inspection →
Packing
8. Package:
1. Sealed plastic bags to prevent oxidation during transportation and storage.
2. Carton box or plywood case outside.
Customers' special request is available for 99.95% pure stranded tungsten wire.

Minimum Order: 1 kilograms

Click to Enlarge