Tips for Maintenance of Floating Fish Feed Pelleting Machine

Tips for Maintenance of Floating Fish Feed Pelleting Machine
News / By Lima / Floating fish feed pellet machine, Floating fish feed pellet
production line / Leave a Comment
The feed pelleting machine is the main equipment in the production process of
each feed factory, and it can also be said to be the heart of the feed pellet
production line. The correct use of the floating fish feed extruder directly
affects the economic benefits of the feed pellet. Therefore, how to properly
use and maintain the floating fish feed extruder is a major issue for feed
factories to improve production efficiency.

Lima floating fish feed pelleting machine is characterized by the use of gear
transmission structure, which has the advantages of long service life, high
production capacity and low power consumption, and has become the preferred
product of various feed factories.

But good equipment also needs correct use and careful maintenance. We have
formulated a set of operating procedures and maintenance systems for the
floating fish extruder. Due to the meticulous maintenance of the equipment, the
hidden danger of equipment failure is reduced, thereby extending the service
life of the extruder, reducing the maintenance cost, and increasing the
benefits for the enterprise.

Get Price Now!
WhatsApp Me Now!
Precautions in the operation of the floating fish feed extruder
1. Lubricate the transmission parts of the granulator regularly, lubricate the
bearing of the pressure roller every 2 hours, and lubricate the front bearing
of the main shaft every 4 hours to ensure the flexible rotation of the
transmission parts of the floating fish feed pelleting machine and reduce the
workload.

Lubricant location of the floating fish feed extruder
Lubricant location of the floating fish feed extruder
2. Regularly replace the lubricating oil in the gearbox of the granulator. The
new machine needs to be replaced once after half a month of operation, and it
must be replaced once every 1,000 hours of continuous operation, which can
prolong the service life of the gear.

3. Once a week, it is necessary to carefully check whether the connecting parts
of each part are loose, whether the stroke safety switch is reliable, and at
the same time clean the feeding auger and conditioner to avoid mechanical
failure.

4. Check the wear of the drive key and the die lining and the hoop every half
month, and replace it in time if the wear is found to avoid the ring die
shaking and affecting the output.

Floating fish feed pelleting machine
Floating fish feed pelleting machine
6. Adjust the gap between the ring die and the pressing roller every shift. If
the machine is blocked, the pressure roller must be loosened, and the gap
between the die rollers must be readjusted after removing the materials on the
inner wall of the ring die.

7. Avoid overloaded production. During the production process, the working
capacity of the granulator itself cannot be exceeded, otherwise, motor damage
and accelerated wear of components will occur, shortening the service life of
the granulator.

Extrusion chamber of the feed pellet extruder
Extrusion chamber of the feed pellet extruder
8. The raw materials must be cleaned of iron and impurities, and the iron
removal device must be cleaned once per shift to avoid foreign matter entering
the mold studio, causing the body to vibrate and the ring mold to crack.

Get Price Now!
WhatsApp Me Now!
Correct operation and attention to the maintenance of the floating fish feed
extruder are the keys to prolonging the working life of the granulator. This
requires strengthening the management of the equipment at ordinary times, and
the benefits of the enterprise will be obvious.

Minimum Order: 1 sets

Click to Enlarge