Style Cast Iron Flange Adapter

SHORT DESCRIPTION
STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the
face of the mating flange must be free from gouges, indentations and deformities
of any type for proper sealing. Refer to the installation instructions for
complete information. • Vic-Flange Adapters must be assembled so there is no
interference with mating components.

PRODUCT DETAIL
Gasket: (specify choice1) Grade “M” Halogenated Butyl Halogenated Butyl (Brown
color code). Temperature range –20°F to + 200°F/–29°C to +93°C. Specifically
compounded to conform to ductile pipe surfaces. Recommended for water service
within the specified temperature range plus a variety of dilute acids, oil-free
air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for
cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.
Grade “S” Nitrile (Red color code). Temperature range –20°F to +180°F/–29°C
to +82°C. Specially compounded to conform to flanged ductile iron pipe.
Recommended for petroleum products, air with oil vapors, vegetable and mineral
oils within the specified temperature range; except hot dry air over +
140°F/+60°C) and water over +150°F/+66°C. STYLE Cast Iron FLANGE ADAPTER
NOT RECOMMENDED FOR HOT WATER SERVICES. 1 Services listed are General Service
Guidelines only. Pipe fitting manufacturer should be noted that there are services
for which these gaskets are not compatible. Reference should always be made to the
latest Victaulic Gasket Selection Guide for specific gasket service guidelines and
for a listing of services which are not compatible. Bolts/Nuts: (specify choice)
Standard: Carbon oval steel neck track bolts meeting the mechanical property
requirements of ASTM A449. Carbon steel heavy hex nuts meeting the mechanical
property requirements of ASTM A563 Grade B. Track bolts and heavy hex nuts are
zinc electroplated per ASTM B633 ZN/FE5, finish Type III (imperial) or Type II
(metric). Optional: Bolts – Stainless steel, meeting the mechanical property
requirements of ASTM F593, Group 2 (316 stainless steel), condition CW. Nuts –
Stainless Steel meeting the mechanical property requirements of ASTM F594, Group 2
(316 stainless steel), condition CW, with galling reducing coating.

Minimum Order: 10 pieces