SMC Cable Braket

The SMC cable bracket is a combination consisting of a cable bracket, a post
and a fixed pin. The material of the column and the pin is also made by the
high temperature pultrusion of the FRP composite. The column can be arbitrarily
cut length according to the needs, the height of the layer is adjusted, and the
assembly is free. The cable bracket has various specifications to meet
different lengths and load requirements.

Light weight, high strength, aging resistance, UV protection, more importantly,
1 mm can withstand voltages above 10,000 volts, it is a good insulation
material.

Features: high insulation, chemical resistance, high fire resistance, good
water resistance, accurate size, stable working performance, light weight, high
strength, acid and alkali resistance, waterproof, moisture-proof.

SMC Cable Braket Specification

Project SMC Cable Braket Galvanized angle bracket
Density (g/cm3) 1.80 7.85
Specific strength 167 90
Corrosion resistance (80°/100h) 0.012 0.023
Insulation strength (kv/mm) 14.0 Conductive
Flame retardancy meets the FH-1 --
Water resistance (%) 0.11 --
Corrosion resistance Corrosion、acid、alkali、salt resistant Corrosive, easy
to rust
insulation insulation Conduction
Mechanical strength Top force 2.5kN deflection 1.0cm Top force 2.5kN
deflection 1.2cm
Lateral force 0.5kN Top horizontal offset 7cm Top horizontal offset
7cm
Weight light weight
Eddy current effect (loss) no Large loss
Manufacturing process is difficult easy Many processes and long cycle
Cable outer sheath scraping test No visible damage There is a
little visible damage
Raw material Cheap, resource-rich More expensive, partially imported
Maintenance Free maintenance 5-7 years need to be repaired once
Installation process is difficult or easy Short time and easy to install
Long time, difficult to install
Use life 30 years 10 years
SMC and BMC composite require heating rather than cooling systems. The
temperature of the mold is usually between 130 and 160. It is very important to
keep the temperature of the mold and the exhaust gas when designing the mold.
The mold is easier to fill, the product is not easy to be deformed, and the
surface is better. Commonly used heating systems are steam, oil and electric
heating rods.

Established in 2010 and located in Chengnan Development Zone, Luoshe Town,
Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has
extensive bulk molding compound process and many refined testing laboratories
as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang
Technology Co., Ltd. can manufacture top quality bmc compound molds with
advanced mold making concept, proprietary application technology and production
technology. By the way, being a high-tech enterprise, it is a fact that this
company enjoys a good fame in the new motor and energy automobile industry in
Hangzhou.

Minimum Order: 1 sets

Click to Enlarge