Wires & Cables

The type of packaging and packaging may affect certain properties of the enameled wire, such as resilience. Therefore, the type of packaging (such as the type of delivery reel) should be negotiated between the supplier and the purchaser to determine that the enameled wire should be wound evenly and tightly on the delivery reel or placed in the container. Unless there is agreement between the supplier and the buyer, there should be no more than one line of enameled wire in the delivery reel or container. When there is more than one line segment, the supplier and the buyer shall agree to mark the length of the line segment on the label and/or mark the package. When the enameled wire is delivered in a loop, the size and maximum weight of the loop shall be determined by the supplier and the buyer. Any additional protection on the coil GB/T610.1-2008/IEC603170-1:2005 It should be decided by both parties. https://www.fd-enameledwire.com/produc , t/copper-eneamelled-wire/qa-2-155-grade- polyes , ter-nylon-composite-enameled-copper-round-wire.htm , l

See the relevant product standards for weight loss. The pinhole test can be found in the relevant product standards. The type of packaging and packaging may affect certain properties of the enameled wire, such as resilience. Therefore, the type of packaging (such as the type of delivery reel) should be negotiated between the supplier and the purchaser to determine that the enameled wire should be wound evenly and tightly on the delivery reel or placed in the container. Unless there is agreement between the supplier and the buyer, there should be no more than one line of enameled wire in the delivery reel or container. When there is more than one line segment, the supplier and the buyer shall agree to mark the length of the line segment on the label and/or mark the package. When the enameled wire is delivered in a loop, the size and maximum weight of the loop shall be determined by the supplier and the buyer. Any additional protection on the coil GB/T610.1-2008/IEC603170-1:2005 It should be decided by both parties. https://www.fd-enameledwire.com/produc , t/copper-eneamelled-wire/qzy-2-180- direct-weld , ed-polyurethane-enameled-copper-round-wire.html

JLD-ELECTRONICS IMPORT & EXPORT CO.,LIMITED Add: Room1588 NO40 Tianhuroad,SiMingDistrict,XiaMen City,China.361004 Tel：86 0592-3286128 13850098632 Fax：86 0592-3286128 Email : peterjld1688@163.com Post Code：361001 Web:www.jld-electronics.com IIMKM02 IIMKM02A IIMLM01 IIMLM21 IIMPM01 IIMPM02 IIMRM01 NTRL02B NTRL03 PHAHPSKITAC000 PHAHPSKITAC500 PHCBRC20000000 PHCBRCPBA20000 PIU44C422000000 PIU44S NTDI02 NTDO01 NTDO02 NTFB01 NTLS01 NTMF01 NTPL01 NTRL02A NTAO01 NTCF01 NTCF02 NTCF03 NTCL01 NTCS01 NTCS02 NTCS04 NTCU01 NSIM01 NSPM01 NSSM01 NTAI01 NTAI02 NTAI03 NTAI04 NTAI05 NTAI06 NMFC02 NMFC03 NMFC04 NMFC05 NMFP03 NPSM02 NPTM01 NRDO01 NRIO02 IMAMM03 IMAOM01 IMASI02 IMASI03 IMASI13 IMASM01 IMASM02 IMASM03 IMASM04 IMASO01 IMASO011 IMCIS02 IMCIS12 IMCIS22 IMCOM03 IMCOM04 IMCPM02 IMDSI02 IMDSI12 IMDSI14 IMDSI15 IMDSM04 IMDSM05 IMDSO01 IMDSO02 IMDSO03 IMDSO04 IMDSO14 IMDSO15 IMEFC12 IMFBS01 IMFCS01 IMFEC11 IMLMM02 IMMFC03 IMMFC04 IMMFC05 IMMFP01 IMMFP02 IMMFP03 IMMPC01 IMMPI01 IMPCC01 IMQRS02 IMRIO02 IMSED01 IMSET01 INBIM02 INBTM01 INICT01 INICT03 INIIT01 INIIT02 INIIT03 INIPT01 INIPT02 INLIM03 INNIS01 INNIS11 INNPM01 INNPM11 INPBS01 INPCT01 INPPT01 INPTM01 INSCS01 INSEM01 INSIM01 INSOE01 NAMM02 NAMM03 NAOM01 NASI02 NASM01 NASM02 NASM03 NBIM02 NBTM01 NCIS01 NCIS02 NCOM03 NCTM01 NDSI01 NDSI02 NDSM04 NDSM05 NLIM02 NLIS01 NLMM02 NLSM02 NMFC01 NMFC02 NMFC03 NMFC04 N IEFAN04 CBE01 NIAC02 NIAC03 NIAC04 NIAO01 NIAI02 NIAI03 NIAI04 NIAI05 NIAM02 NICL01 NICS01 NIDI01 NIDO01 NIDS01 NIMF01 NIMF02 NIMP01 NIMP02 NIPL01 NIRL03 NTAI02 NTAI03 NTAI04 NTAI05 NTAI06 NTAM01 NTAO01 NTCF01 NTCF02 NTCF03 NTCL01 NTCS02 NTCS04 NTCU01 NTDO01 NTFB01 NTLS01 NTMF01 NTPL01 NTRL02 NTRL03 NTSM01 NTST01 ST225 TM252 NIOX01 IOXM NPIM01 NMFP01 NFMP03 IIADP02 IIMCL01 IIMCP01 IIMCP02 IIMGC01 IIMGC02 IIMGC03 IIMGC04 IIMLM01 IIMPM01 IIMPM02 IIMRM02 IIMSM01 IIOIC OMTI IIDOP04 IIDOP05 NKAI01 NKAS01 NKCL01 NKDO01 NKDS05 NKLM01 NKLS01 NKLS03 NKLS04 NKMF01 NKMF02 NKMP01 NKPL01 NKPR01 NKTL01 NKTD02 NKTM01 NKTT01 NKTU01 NKTU02 40PS3201A IEPAF01 IEPAS01 IEPAS02 IPMON01 IPSYS01 NIOP02 NPEP01 NPSI02 NPSI03 NPSM02 IEPEP01 IEPEP03 IPECB11 IPBLK01 IPCHS01 IPFCH01 IEPMU01 IEPDP01MFC05 NMPC01 NPIM01 NPTM01 NSBM01 NSIM01 NSPM01 6637801A2 6637804C1 IECAB01 IEFAN01 IEMMU01 NMMU01 IEMMU11 IEMMU04 IEPMU01 IMBLK01 IPFAN14 NFTP01 NFAN01 NTMU01 NTMU02 258603A1 IPFAN11 IPSYS01 IPMON01 INNIS11 IEPAS02 INICT03AINFI90 IEMMU11 IMFEC12 IMASI13 P-HA- RPS-PEP11013 IMDSI22 IMDSI12 IMDSI14 IMDSO14 INFI90 NTCL01 P-HA-RPS-32200000 PHCBRC10000000 NKLS01-15NIS P-HA-RPS-PEP21013 P-HA-RPS-FAN03000 IMMP101 NTAI06 NTAI05 NKMP01-2 NKTU01-15 NKSE01-2 NKAS01-15 IPSYS01 IPFAN14 IPFLD125 IPECB11 SPP-2205B NPORT5630-8 DE-816TP ADAM4520 IMFEC12 IMFEC11 IMDSI14 IMDSI22 IMDSO14 IMDSM04 IMFCS01 INICT03A IMRIO02 INSOE01SOE LPS01DEH TAS01DEH IIMKM02AOIS IIMLM01OIS IIMRM02OIS IIMCL01OIS IIMCP02OIS 32P.BIIADP02 IIMCL01 IIMCP01-IP IIMCP02 IIMGC01 IIMGC02 IIMKM01 IIMKM02A IIMLM01 IIMPM01 IIMPM02 IIMRM02 IIPRT02 IIOIS IIOIC BRC-100 IMMFP01 IMMFP11 IMMFP02 NTCL01 IMMFP03 NAOM01 IMAOM01 NAMM02 NAMM3 IMAMM03 NCOM03 IMDSI22 NCOM04 IMCOM03 IMCOM04 NLMM01 NLMM02 IMLMM02 NMFC01 NMFC02 IMDSO14 NMFC03 NMFC04 NMFC05 IMMFC03 IMMFC04 IMMFC05 NMPC01 IMMPC01 NTAI05 NTAI06 NTCL01 NTCL01-A NTR002-A NTR003-A INICT01 INIIL02 INNIS11 INIIT02 INIIT03 INICT13A INCT03 IMSET01 IMTKM01 IMMPI01 IMFEC12 IMAS002 IMFBS01 IMASI02 IMASI03 IMASI13 IMDSI14 IMDSO15 IMFEC11 IMFEC12 IMFCS01 NASI01 NASI02 NASM01 NASM02 NASM03 NASM04 NPORT5630-16 IMASM01 IMASM02 IMASM03 IMASM04 NASO01 IMASO01 NBLK01 IMBLK01 NCIS0 NCIS02 IMCIS02 IMCIS12 IMCIS22 NDSI01 NDSI02 IMDSI02 IMDSI12 IMDSI22 NDS001 NDS002 NDS003 NDS004 IMDSO01 IMDSO02 IMDSO03 IMDSO04 IMDSO14 NDSM03 NDSM04 IMDSM04 NDSM05 NDSM05 IMDSM05 NRIO02 IMRIO02 SD812F IDAS-2003 NKLM01 NKMP01 NKRL02 NKCL01B-5 NKCL02B-5 NKTU01 NKTU01-3 NKTU01-10 IPSYS01 NKTU01-10 NKTU01-1538 NKTU01-2540 NKLS01280 NKAS01320 NKHS03380 NKEB01440 NKCL02B620 NKRL0234 .PBA3000A NTST01 EES-1008D AHA-294 TPSTU02 NTRL02B NTHS03 NTAI06 NTAI05 NTAI05 LIMK-CISCO NRAO01 NTAI06 NTR002 NTAI05 PS10-4000 NTAI06 800V192A IEMMU11 P-HA-RPS-PEP11013 BPB- BB250VAC25A PEP-BB DY2000 PEP-BB220VAC25A TSXWUP1051 P-HC-BRC-300 NFTP01 IMMU02 RMHSS03 DH250 6638514AE SEMAPT NKMR02-15 AHA2940 AHA2940 MMU21 IMMFP02 Bailey INNIS01 Bailey INNPM01 Bailey NDTI01 NTAI06 BCN46215160 BRC100 CLC01 CLC03 CLC04 CTT01 CTT02 IEFAN01 IEMMU01 IEMMU11 IEPAF02 IEPAS02 PHARPSFAN03000

Minimum Order: 1 bags

The temperature index test shall be carried out on IEC 60172 on unimpregnated enameled wire specimens with a nominal conductor diameter of 1.000 mm and a grade 2 film thickness. The temperature index shall not be less than the specified value of the relevant product standard, and the failure time at the lowest test temperature shall be not less than 5000h. See the relevant product standards for refrigerant resistance. Straight weldability can be found in the relevant product standards. Thermal bonding is subject to the requirements of the relevant product standards. See the relevant product standards for the dielectric loss factor. See the relevant product standards for transformer oil resistance. See the relevant product standards for weight loss. The pinhole test can be found in the relevant product standards. https://www.fd-enameledwire.com/prod , uct/copper-eneamelled-wire/qzy-xy-2-180- grade- , polyesterimide-nylon-composite-enameled-copper-rou , nd-wire.html

1. The temperature index test shall be carried out on the unimpregnated enameled wire specimen with a nominal diameter of 1.000 mm and a grade 2 film thickness in accordance with GB/T4074.7-2009. 2. The temperature index shall not be less than the specified value of the relevant product standard, and the failure time at the lowest test temperature shall be not less than 5000h. 3. When requested by the user, the manufacturer shall provide proof that the enameled wire meets the temperature index requirements. 4. Note: The temperature index for the extrapolated life of 20000h is only for unimpregnated enameled wire samples, not as part of the insulation system. The Celsius temperature relative to the temperature index is not the recommended enameled wire use temperature because the temperature of use is related to many factors, including the type of equipment involved. See the requirements of the relevant product standards for refrigerant resistance. Straight weldability is not applicable. Thermal bonding can be found in the relevant product standards. The dielectric loss factor can be found in the relevant product standard. https://www.fd-enameledwire.com/produ , ct/aluminum-enamelled-wire/qzl-2-155- polyester , -enameled-aluminum-round-wire.html

Minimum Order: 100

1. The temperature index test shall be carried out on the unimpregnated enameled wire specimen with a nominal diameter of 1.000 mm and a grade 2 film thickness in accordance with GB/T4074.7-2009. 2. The temperature index shall not be less than the specified value of the relevant product standard, and the failure time at the lowest test temperature shall be not less than 5000h. 3. When requested by the user, the manufacturer shall provide proof that the enameled wire meets the temperature index requirements. 4. Note: The temperature index for the extrapolated life of 20000h is only for unimpregnated enameled wire samples, not as part of the insulation system. https://www.fd-enameledwire.com/product , /aluminum-enamelled-wire/qzl-2-130- polyester-e , nameled-aluminum-round-wire.html

Professional connector crimping equipment, designed for specifically for processing high-end, precision wire it replaces the traditional soldering together of wires with splice band crimping, without cold solder and air pollution.With humanization design, it is easy to operate. It adopts automatic conveyor with continuous for copper terminal (patent’s in the official records please don’t counterfeit), it can finish the processes of cutting, shaping and crimping in one time without scraps, saving cost. The mold is customized according to the wire size and the splice band specifications, and different wire size are configured with different mold. If the wire size is same, and the splice band size is changed, that need to accord request to do different mold. Splice band processed by special lines, and after riveting, the tension- resistant will be particularly strong, which ensures the stable quality. Function: Equipment adopt 1.0KW servo motor Equipment adopt Touch screen control debugging. a. terminal splice high b. terminal pressing power c. terminal pressing keep time d. equipment Install pressure testing device e. using stepper drive feed f. equipment 90% vertical operation g. equipment installed according to customer requirements monitor control pressure contact Copper width: . Splice width is according product and require to choose, according for different industry product has 3 standards. . 2MM: high precision, low current products, electronic and common product; . 4MM: common standard product; . 6MM: High current products, power connection. High tensile strength. Technical data: Splice force:2.0 Ton (can adjust) Splice time:0.01S (can adjust keep crimp time) Stop splice machine:Can adjust Motor rating:0.75KW Servo motor Power supply:AC220/50HZ Wire diameter:AWG24#-AWG10# Feeding length parameters:1mm-99.9mm Cooper width:1.0-6.0mm splice precision:0.1-0.2(±0.05m) Dimensions:340*360*4 , 50mm Crimp Pull Power:Within 15KG Weight:65KG Driving way:Servo motor, stepping feeding

Minimum Order: 1 bags

Characteristics: 1. This machine is specially designed for cutting a series of rough pipes, such as bellows corrugated tube, silicon rubber pipe, rubber pipe, oil seal pipe, coffee pipe, medical tubing, gas pipe, water pipe and so on. It adopts caterpillar feeding control, with high precision and high speed. 2. The cutting device adopts the design of art knife, the cut is flat, blade cost is low, and the replacement is simple and convenient. 3. Feeding by steppingmotor,whichhas the characteristics of stable feedingand accurate length. The circuit adopts high-precision single chip integrated control, simple operation and stable control. The screen adopts touch-screen color screen to display all kinds of data at a glance. Technical Parameters: Model No. HWN-86A Voltage AC220V Power 560W N.W./G.W: 66/84KG Cutting Speed 60-210 cuts per minute Cutting Accuracy +/- 0.1mm Cutting Length 0.1-99999.9mm Cutting Diameter Max 38mm Dimension (LxWxH) 650x480x420mm

Minimum Order: 1 bags

This single granule terminal crimping machine(benchtop crimping press) adopts high-tech inverter technology, electronic precision positioning, avoids traditional terminal crimping machine clutch electromagnet common failure. Description： Power saving environmental protection, motor runs when machine is working. Machine mould continuum, no need to change mould, quick save time. Voltage stability, speed, high accuracy. Suitable for crimping computer terminal, DC terminal, single grain terminal, joint terminal. Light and handy structure, easy moving workplace, mute operation. Specifications Model No. LL-1.0T LL-1.5T LL-2.0T LL-3.0T LL-4.0T MaxPressure 1 Ton 1.5Ton 2.0Ton 3.0Ton 4.0Ton Mold Type Fixed Mold OTP Mold,#2000 Mold, JST Mold etc Power Supply 220V/50Hz Air Pressure Full Electric, No need air compressor Power Rating 250W 550W 750W 1000W 1500W Net Weight 25KG 35KG 50KG 55KG 75KG Size (MM) 250x210x460 280x250x600 320x280x650 320x280x660 350x320x720

Minimum Order: 1 bags

This semi-automatic h05vv-f stripper crimper machine is mainly used for: USB data cable, power cable, earphone cable, audio cable, stripping and crimping several core wires completed at one time, scrap insulations will be blown away by compressed air to ensure crimping depth 100% consistent. Use advanced CPU to control the precision of each action and improve the working efficiency. 1. Mainly used for: USB data cable, power cable, earphone cable, audio cable, stripping and crimping several core wires completed at one time, scrap insulations will be blown away by compressed air to ensure crimping depth 100% consistent. Use advanced CPU to control the precision of each action and improve the working efficiency. 2. High speed: 0.2 seconds crimping speed each time improves the working efficiency. 3. Mute: Step on the pedal and the motor works. Don’t step on it, it won’t work. Therefore, the noise generated by the rotation of the motor and the huge noise generated by the mechanical clutch and electromagnetic collision are eliminated. 4. Intelligent control, which accurately realizes basic functions such as wide speed regulation and precise positioning, and increases the number of workers leaving their posts, the processor automatically cuts off the power supply, and switches lighting and other intelligent management. 5. Energy saving: It saves the energy consumption to the greatest extent as 10x240W=25W/HRS. This machine is 40000×0.2(s/pcs)/3600x2500w=0.556kw/hrs. Compared with the two, the single machine and single shift can save energy nearly 2KW . 6. Long-term maintenance-free: Use electrical control instead of mechanical clutch or electromagnetic clutch, which effectively eliminates the hard contact between machines and reduces wear. In addition, all transmission parts have been treated with hydrogen permeation, which increases the strength and wear resistance. The compact reducer and motor are used as the main power source. Size: 300x280x450mm Crimping force: 2ton Stroke: 30mm Weight: 85KG Power Source: AC220V 50Hz Power: 750W Safety device: Top dead center sensor

Minimum Order: 1 bags

This Vibrator Bowl Insulated Crimp Ring Terminal Wire Terminating Machine, using high-tech frequency conversion technology, precise electronic positioning, when pressing, the motor working noise is smaller than the traditional terminal machine, and power saving, mode adjustment is more convenient and fast, to avoid common faults such as traditional terminal clutch, electromagnet and so on. 1. Adopt the latest intelligent digital voltage regulation and vibration feeding controller, and add PLC program. 2. Cylinder and die are used to feed at the same time, so that the feeding is more accurate, faster, better stability, and basically no stuffing phenomenon. 3. Improving the design of slope track, speeding up the transmission of terminals, the stuffing basically disappeared. 4. 2T ultra-silent wire crimping machine, no noise, safer employees, using card-type mold, easy to unload. 5. Using infrared control, when the track is full of terminals, the vibrating disc stops automatically. 6. Replacing expensive continuous terminals and adopting economical bulk terminals can save cost. 7. It is the best choice for small and medium-sized enterprises to replace singles electric small punches, improve the safety of workers and run at a speed comparable to that of connecting terminals. Power Source: AC220V/50Hz Power: Motor 250W / Vibrator bowl: 120W Net Weight: 130kg Dimension: 450x860x1360mm Crimping: 2Ton Slide Stroke: 30mm Crimping Frequency: 120times per hour Closure Height: 26mm Closure Height Adjust: 10mm Appropriate Terminal Type: Loose terminal Production: 7200pcs/hour

Minimum Order: 1 bags

This 12k crimps/hour 1.5T ribbon cable crimping machine can replace the OTP transverse die arbitrarily,simpler than the old model, fast debugging,output can reach 12000 pcs per hour. It adopts new NC debugging parameters and LCD display. It eliminates the steps of difficult mold adjusting, and has exquisite design,greatly reduces the labor intensity of workers, improves production efficiency and effectively controls the undesirable rate. Easy operation and free maintenance. Technical Parameter Size:260*300*780mm(L*W*H） Weight , :80KG Power Source: Single Phase 220VAC/ 50/60HZ,10A Display: Chinese/English (English refers to user manual) Total Power:550W Cylinder Pressure:0.4-0.7MPa（adjustable） Working Efficiency: 12000 crimps/hour（cauculated as 12Pins above ribbon cable) Appropriate Wire: 0.8-2.0mm,AWG20-28, Red Blue White FBC（2468）,Grey FBC（2651）,Color FBC and etc 2-40pins Cutting Length:>70mm Ribbon Cable Split Length: 30mm Crimping Strength: 1.5T

Minimum Order: 1 bags

1. This fully automatic AWG32-14 wire stripper terminator use true color touch screen,easy to operate,precise stepping motor and its driver,accurate and stable. 2. The parameters can be adjusted by setting the touch screen: whether the wire both ends are fully stripped or not, whether the wire both ends are partially stripped or not, whether the wire both ends are crimped or not. 3. Wire cutting length,wire stripping length and incision depth can be adjusted by touch screen. 4. The crimping device adopts universal mute terminal crimping machine with low noise and stable performance, it can carry transverse/direct applicator. Product name: Fully automatic double-ends single wire terminal crimping machine Wire size: 0.08-3.0mm2 (AWG#32-14) Production: both-ends crimping: 4500 bars per hour (decided by different wire cutting length) Function: both-ends full stripping, both-ends partial stripping, both- ends terminal crimping Wire Cutting Length: 35-9999 mm Cutting Accuracy: 0.2 + (set cut-off length * 0.002) Wire Stripping Length: Wire front stripping: 1.00-15.00/25.00 mm; Wire tail stripping: 1.00-8.00 mm Detection device: Wire detection, wire knotting detection, improper crimping detection, etc. Power Source: Single phase: AC220V 20A

Minimum Order: 1 bags

This rotary coaxial cable stripping machine is mainly used for processing coaxial cable and special single wire, using the most advanced rotating turret, to improve the accuracy and speed. Use of specific tools and rotary axis positioning device, and can strip up to 9 layers without changing the blade corresponds to the processing of various sizes and sheath wire, and is equipped with freely set controller modular, digital display cutting diameter. Device Name: 4806 Rotary Coaxial Cable Stripping Machine Technical parameters: Max cable diameter: 0.81-up to6.99 mm Cutting Unit Depth: 0.01mm Stripping Length: 48mm Stripping layers: 9 Drive mode: motor / ball screw drive (imported from Japan) Display: Touchscreen Blade: 2, Material: tungsten steel imports Switzerland Centering sheet: 2, Material: tungsten steel imports Clamp means: self-aligning, motor drive, the clamping force control program Productivity: 500-700pcs / h (depending on the cable type and length dependent) Open: Manual / Sensor Power: 220V / 50HZ Power: 250W Net Weight: 25KG Dimensions: 525X186X278 mm

Minimum Order: 1 bags