Wires & CablesHome > Offers to Sell > Electronics & Electrical > Wires & Cables
11/30/23 6:22 GMT
0.6/1 (1.2) Kv Low Voltage unarmoured power cable Copper/Aluminum Unarmore
0.6/1 (1.2) Kv Low Voltage unarmoured power cable Copper/Aluminum Unarmored Cable Product Description 0.6/1 (1.2) Kv Low Voltage 5*50mm2 5*70mm2 5*95mm2 5*120mm2 Cu (AL) /PVC/PVC Copper/Aluminum Unarmored Power Cable CONDUCTOR MATERIALS : Copper or Aluminium ,round or sector shaped, stranded wire (Class2) conform to BS EN / IEC 60228 ;For smaller sizes, solid wire( Class 1 ) to BS EN / IEC 60228 INSULATION MATERIALS : PVC(Polyvinyl Chloride) ,PVC Insulation material and thickness shall be as per IEC 60502-1 and BS 6346 Insulation Core Color Indentification: *1Core: Brown or Blue *2Core :Brown-Blue *3Core :Brown-Blue-Grey *4Core :Brown-Blue-Grey-Black *5Core :Brown-Blue-Grey-Black-Yellow&Green BEDDING: Extruded bedding compound PVC(Polyvinyl Chloride) ARMOURED: Aluminum(single core)/Galvanized Steel Wires applied helically over the bedding as per IEC SHEATH: Extruded PVC (Polyvinyl Chloride) to conform conform to IEC 60502-1 Color-black other colours to special order TECHNICAL CHARACTRISITICS: * Rated voltage U0/U : 0.6/1kV. *Temperature Rang -25ºC to + 70ºC *Bending radius: Circular conductor =6D & Shaped Conductor=8D *Mechanical impact :Very good *Fire Performance:the flame test requirements of IEC 60332-3-22, IEC 60332- 3-23 and IEC 60332-3-24, *Flexibilty:Rigid *Low smoke emissions :BS7622 *Halogen free:BS EN50267-2-1 &BS EN50267-2-3 APPLICATION: SWA Armoured Cables are used for power networks supply ,undergrand,outdoor and indoor applications and for use in cable ducting. Suitable for use in power distribution lines with rated voltage 0.6/1KV low voltage installation system . For laying in shaft, water underground and large diference of level, able to bear external mechanical pressure and moderate pulling force. Contact:
Phone: Fax: Email: Fangyu(shanghai)Automation Technology Co.,Ltd
Room 1702, Building 4, Lane 658, Guangfulin Road, Songjiang District, Shanghai Shanghai 200000 China 11/13/23 3:32 GMT
SC To LC Single Mode Fiber Patch Cable 2mm PVC Fiber Optic Jumper
The Fibra Optica SC APC to LC UPC Simplex 2.0mm PVC Single Mode Fiber Patch Cable Jumper Fiber Patch Cord is used as a jumper from the equipment to the optical fiber wiring link. It has a thick protective layer, which is generally used for the connection between optical transceiver and terminal box. It is applied in some fields such as optical fiber communication system, optical fiber access network, optical fiber data transmission and LAN. According to different transmission media, optical fiber jumpers can be divided into common single-mode and multi-mode jumpers of silicon-based optical fiber, as well as other optical fiber jumpers with plastic as transmission media; According to the connector structure, it can be divided into FC jumper, SC jumper, St jumper, LC jumper, MTRJ jumper, MPO jumper, Mu jumper, SMA jumper, FDDI jumper, E2000 jumper, din4 jumper, D4 jumper and so on. Common optical fiber jumpers can also be divided into FC-FC, fc-sc, fc- lc, fc-st, SC-SC, sc-st, etc. LC type optical fiber jumper: connector connecting SFP module, which is made of modular jack (RJ) latch mechanism with convenient operation. Minimum Order: 500 Contact:
Phone: Fax: Email: Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou Chengdu China 11/10/23 8:49 GMT
Wire Harness
A CABLE ASSEMBLY is a complete component made up of multiple cables and connectors, commonly used to connect different devices. It can be customized, with high reliability and stability, and is one of the commonly used components in modern electronic devices. Contact:
Phone: Fax: Email: Champway Electronics Co., Ltd
13F.-5, No.5, Sec. 3, New Taipei Blvd., Xinzhuang Dist. New Taipei City 24250 Taiwan 11/10/23 8:49 GMT
FFC Cable
FFC CABLE is a flexible flat cable commonly used for connecting LCD displays, touch screens, keyboards, and other devices. It features high-density arrangement and thinness, effectively saving device space, and is one of the commonly used connection methods in modern electronic products. Contact:
Phone: Fax: Email: Champway Electronics Co., Ltd
13F.-5, No.5, Sec. 3, New Taipei Blvd., Xinzhuang Dist. New Taipei City 24250 Taiwan 10/27/23 4:01 GMT
LC/UPC to LC/UPC Multimode Duplex Fiber Optic Patchcord
LC UPC-LC UPC Simplex 3.0mm OM1 Multimode Fiber Optic Patch Cord is used as a jumper from the equipment to the optical fiber wiring link. It has a thick protective layer, which is generally used for the connection between optical transceiver and terminal box. It is applied in some fields such as optical fiber communication system, optical fiber access network, optical fiber data transmission and LAN. LC UPC-LC UPC Simplex 3.0mm OM1 Multimode Fiber Optic Patch Cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. Minimum Order: 100 Contact:
Phone: Fax: Email: Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou Chengdu China 10/26/23 11:37 GMT
FFTTH LC/UPC To LC/UPC Fiber Jumper Cable Duplex 0.9mm 2mm 3mm
FTTH Jumper Cable for Network SM Duplex Single Mode LC to LC Fiber Patch Cord is used as a jumper from the equipment to the optical fiber wiring link. It has a thick protective layer, which is generally used for the connection between optical transceiver and terminal box. It is applied in some fields such as optical fiber communication system, optical fiber access network, optical fiber data transmission and LAN. There are many kinds of optical fiber jumpers (also known as optical fiber connectors), that is, optical fiber connectors connected to optical modules, and they cannot be used with each other. SFP module is connected to LC optical fiber connector, while GBIC is connected to SC optical fiber connector. LC type optical fiber jumper: connector connecting SFP module, which is made of modular jack (RJ) latch mechanism with convenient operation. LC-LC Fiber Optic Cable body is made of PVC/ LSZH plastic materials, which is shiny, tough, environmental protection, not fade,not broken and not easily deformed. The inside optical cable is aramid, which is tough, tensile, non-toxic, fire retardant, core protection and low smoke. The connector is PBT plastic materials and fine copper, which is firm, durable, environmentalprotection, high temperature resistant, not fade, not broken and not easily deformed. 3.Application 1. Communication rooms 2. FTTH (Fiber to The Home) 3. LAN (Local Area Network) 4. FOS (fiber optic sensor) 5. Fiber Optic Communication System 6. Optical fiber connected and transmitted equipment Minimum Order: 500 Contact:
Phone: Fax: Email: Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou Chengdu China 9/25/23 10:07 GMT
11.8 Inch Nature / Black Stainless Steel Cable Tie 4.6*300mm SS316 Cable Ti
11.8inch SS316 Nature / Black Stainless Steel Cable Tie 4.6*300mm Product Features: 1.Characteristic:they have an unique ball locking mechanism that alloweasily and quickly installed and not undone. 2.Hight tensile strength:Non-flammability 3.Temperature:wor , king temperature-60c~550c 4.High resistance to acetic acid,alkali acid,sulphuric acid,corrode etc. 5.All length are avaiable,stainless steel type :304,316. 6. Accept width: 3.6mm,4.6mm,7.9mm,10mm,12mm,15mm,19mm. all length are avaliable if the width is not change,wihtout extra cost. coated self -locking stainless steel cable tie thickness:0.25mm. Service life:50years 7. The stainless steel ball is D2.5mm Strong pull(Tensile Strength): 100kg--200kg different width,different Strong pull Supporting tools: HS-600 and LQG Contact:
Phone: Fax: Email: Wenzhou Kaili Electric Co., Ltd.
xiamen village liushi town yueqing city zhegjiang province yueqing 325600 China 9/21/23 9:28 GMT
Optical Fiber Cable / Self-Supported Round Drop Cable GJYC8H
The cable consists of individually color-coded 900µm secondary coated fibers reinforced with aramid yarns and covered with UV and flame-resistant LSZH Sheath. The cable cross-section is Fig 8 made with a steel wire strength member Product Construction Fiber: 1-12fibers 900µm tight buffer Strength Member: Aramid yarn Messenger Member: Steel wire or non-metallic member. Outer Jacket: UV and Flame resistant LSZH FiberType: G.652D, G.657A1 or G.657A2 single mode fiber Features Good UV and flame resistant. Compact, soft, flexible, and easy to install. Fig8 self-supporting design. Applications Used in the access network or access cable from outdoor to indoor in customer premises network. Used as access building cable in the premises distribution system, mainly used in indoor outdoor aerial access cabling. XUANFENG TECHNOLOGY CO., LTD. is a modern enterprise for primary operating and selling electronic wires and electric cables. We have the trading company and production factory both possessing of the convenient transportation and ripe producing experiences.We have the CPR, FCC, ISO, CE, ROHS, ccc,and ISo9001:2008 and can provide the products according to ASTM, ICEA, BS, DIN, IEC, GB etc. standard to meet the customers’ various requirements. We produce electrical cables and communication cables. We specialize in supplying 300V/500V solid/stranded general PVC cable, coaxial cable, security cable, telephone cable, speaker cable, alarm cable,networking cable, H05RN-F/H07RN-F flexible rubber cable, YH/YHF welding cable, submersible pump cable, aluminium conductor cable, copper/aluminium high-middle-low voltage PVC/XLPE cable ,solar cable and patch cord, usb cable,hdmi cbale,audio cable,vga cable,and other products. Up to now, we have established the solid foundation of several important markets such as Mid East, Europe, Africa, Latin America, Southeast Asia, North America market. We have won a good reputation among customers with good quality, competitive prices and advanced techniques since our establishment. WIth a positive innovation and hard work,all staff will struggle for making XUANFENG to be afamous brand in the world and hand in hand with you to create a rosy prospect. Minimum Order: 100 Contact:
Phone: Fax: Email: Shenzhen XuanFeng Technology Co.
DISTRITO DE LONGHUA, SHENZHEN, PROVINCIA DE GUANGDONG, CHINA ShenZhen 5180000 China 9/21/23 8:00 GMT
Single Core Single Mode Fiber Optic Jumper Cable – LC/UPC-FC/UPC-SM 2.0mm P
Main technical parameters : * Optical fibe , r external diameter: φ0.9mm, φ2.0mm, φ3.0m , m are option al, and PC, UPC, and APC a , re available, there are two kinds of sing le-mode and multi-mode. * Insertion loss: , ≤0.2dB * Echo Loss: PC≥40dB,UPC≥50dB , ,APC≥60dB * Exchangeability test: ≤0.2dB , * Vibration test: ≤0.1dB (10-60Hz, 1.5m , m amplitude) * Tensile strength test: ≤0 , .1dB (0- 15Hg tension, excluding 0.9mm opt , ical fiber) * High-temperature test: ≤0.2 , dB (+85 C, lasting 100 hours) * Low-tempe , rature test: ≤0.2dB (-40 C, lasting 100 h , ours) * Temperature cycling test:≤0.2dB ( , -40 ~85 C, after 5 cycles) * Humidity te , st: ≤0.2dB (+25℃~+65℃, relative humidity , 93%, 100 hours later) * Commonly use , d connectors: SC (large head)/LC (small head , /FC (spiral port)/ST (card port) Scope Minimum Order: 100 Contact:
Phone: Fax: Email: Shenzhen XuanFeng Technology Co.
DISTRITO DE LONGHUA, SHENZHEN, PROVINCIA DE GUANGDONG, CHINA ShenZhen 5180000 China 9/13/23 8:46 GMT
Electric Sheathed PVC Insulated Power Cable 0.6/1kv Copper Material
Copper Core PVC Insulated Power Cable Sheathed Electric 0.6 1kv Application This product is suitable for power lines with rated voltage of 0.6 / 1kV and below, for power transmission, suitable for laying in hotels, stations, airports, high-rise buildings, chemical industry, petroleum platform, power station, subway, tunnel and other fixed laying places. Application Performance The long-term allowable operating temperature of the cable shall not exceed 70℃, and the short-time working temperature shall not be over 130℃. The ambient temperature of the installation should not be lower than 0℃. Minimum bending radius during cable installation: single-core cable not exceeding 20D (D is cable diameter), multi-core cable not exceeding 15D (D is cable diameter) Cable Construction Conductor adopts compact shaped or compact circular structure. 3.2 70℃ PVC insulation material is used for insulation, and the insulation thickness is shown in Table 1. Contact:
Phone: Fax: Email: Wuhan Green Song Zheng Cable Co.,Ltd
Room 1 Floor 1 Wire and Cable Manufacturing Bare Wire Workshop 1 Wujin Industrial Park, Dongjing Street, Hannan District, Wuhan City Wuhan 430000 China 9/4/23 10:04 GMT
2.0mm Pitch Cable Wire Assemblies
Company Quick Tour Since its establishment, Dongguan Rich Electronics Technology Co.,Ltd. has been focusing on the research,development, production, and sales of connectors, connecting wires, and wiring harness products. Committed to providing high- qualityproducts, low prices, and high-quality services to our new and old customers. The company produces waterprrof cables,connecting cables, electroniccables, terminal cables, automotive wiring harnesses, silicone cables, Teflon cables, DC cables,power cables, flat cables (gray, red and white,blue and white, color rehearsal, soft cable), USB data cable charging cables,physical therapy instrument wiring harnesses, HDMI high-definition signal cables, LVDS screen cables, VGA signal cables,SATA serial port cables, etc. Our products are widely used in intelligent robots, new energy vehicles, new energy batteries, smart homes, medical treatment instruments, beauty instruments, photoelectric therapy instruments, mobile digital products, intelligent wearables, tablets, drones,household appliances, office appliances, electric toys, electric tools, industrial electronic devices, digital audio and video products,computer peripherals, solar products, intelligent security monitoring, intelligent self-service devices, advertising machines LED screens, LED lighting fixtures, and other fields. The company has senior technical engineering and quality managementpersonnel, complete equipment, strong production capacity,and can provide customers with product design solutions and produce high-quality and affordable products according to their needs. Continuously developing and innovating products, creating product value, has always been the consistent business philosophy of Sanjing. The principles of quality first,customer oriented, and common growth have been widely praised and affirmed by customers. Looking forward to your inquiry, we will be happy to serve you. Contact:
Phone: Fax: Email: Dongguan Rich Technology Electronics Co.,Ltd
Shitanbu community,Tangxia town, Dongguan City, Guangdong Province, China(523717) Dongguan 523717 China 8/23/23 2:22 GMT
3.7KW AC EV Charger Tethered Wallbox
3.7 kw home charger tethered wall box is suitable for all commercial charging needs. It delivers all the safety and smart charging features you need to make charging easy, reliable, and cost-effective for your customers, tenants, and employees. It's built for long-time service, waterproof, and designed to work at -30 to 55 °C ambient temperature, never fearing freezing or the scorching heat. Customers can customize some features including the color, logo, functions, casing, etc. Highlight Of 3.7KW Charger Tethered Wallbox Must be fixed against the wall and is suitable for indoor and outdoor spaces. Feature: compact design, easy to use, durable and beautiful, safe and reliable. For more information about types of protective devices in electrical installations, please feel free to contact us! Minimum Order: 1 bags Contact:
Phone: Fax: Email: Religare Electric Co.,Ltd.
No.91 Nanyang Road,Zhiguang Industrial Zone, LiuShi Town, YueQing Zhejiang 325603 China 8/23/23 2:21 GMT
3.7KW AC EV Charger Socket Wallbox
Our 3.7KW ac ev chargers Socket Wallbox is a compact, efficient EV charging station for home or small business use. It offers universal compatibility, advanced safety features, and reliable operation for electric vehicle charging. Highlight Of 3.7KW AC EV Charger Socket Wallbox Fast Charging: The 3.7KW ac charging ev Socket Wallbox provides rapid charging capabilities, allowing you to charge your electric vehicle quickly and conveniently. Wallbox Design: Designed to be mounted on the wall, this charger socket saves space and provides a neat and organized charging solution for your electric vehicle. Safety Features: The ac electric vehicle charger socket is equipped with multiple safety features such as overcurrent protection, short-circuit protection, and over-temperature protection to ensure safe and reliable charging. Compatibility: The ac charging for electric vehicles socket is compatible with a wide range of electric vehicles, making it versatile and suitable for various EV models. User-Friendly: With its user-friendly interface, the charger socket is easy to operate. It may include features like LED indicators to display the charging status and a user-friendly interface for adjusting charging settings. For more information about electrical overload protection devices and ac ev charger specifications, please feel free to contact us! Minimum Order: 1 bags Contact:
Phone: Fax: Email: Religare Electric Co.,Ltd.
No.91 Nanyang Road,Zhiguang Industrial Zone, LiuShi Town, YueQing Zhejiang 325603 China 8/23/23 2:20 GMT
2 Phase DC MCCB
A DC MCCB (Direct Current Molded-Case Circuit Breaker) is essential in providing protection against electrical hazards in DC systems. Compared to traditional fuses, they offer reduced maintenance costs, increased safety, and higher breaking capacities. DC MCCBs come in two main types: thermal magnetic and electronic trip, and should be properly selected based on system requirements. By regularly inspecting and testing MCCBs, proper functioning and protection is ensured. DC MCCBs have a wide range of applications, including renewable energy systems and industrial machinery. Maintenance and Care Guidelines for Ensuring Optimal Performance of 2 Phase DC MCCB 1 Regular Inspection Perform regular inspections of the MCCB to ensure optimal performance, including visual and functional checks of contacts, overloads and other key components. 2 Testing Perform testing procedures regularly to ensure that the MCCB is functioning optimally and within its rated capacity. 3 Cleanliness Keep the MCCB clean and free of dust or other debris and ensure that ventilation openings are not obstructed to ensure optimal heat dissipation. We provide 2 phase 20 amp breaker, two phase circuit breaker, double phase breaker, circuit breaker phase 2, 2 phase sub panel, two phase breaker, circuit breaker 2 phase, 2 phase breaker panel, etc. For more information about electrical overload protection devices, please feel free to contact us! Minimum Order: 1 bags Contact:
Phone: Fax: Email: Religare Electric Co.,Ltd.
No.91 Nanyang Road,Zhiguang Industrial Zone, LiuShi Town, YueQing Zhejiang 325603 China 8/23/23 2:20 GMT
2 Phase DC MCB
A two phase mcb is a miniature circuit breaker that ensures safe and reliable operation of electrical systems using DC power sources. The two-pole configuration provides protection against overloads, short circuits, and other faults within the system. The advanced electronics and high-speed switching in 2 phase DC MCBs improve the efficiency of the electrical circuit and reduce energy consumption. These circuit breakers are commonly used in small electronic devices and automotive systems. The modular design of 2 phase DC MCBs makes maintenance and component replacement convenient. In addition, they provide cost savings on maintenance, reduce downtime, and protect against potential hazards, ensuring efficient operations of electrical systems. Working Principle and Functions of 2 Phase DC MCB 1 Working Principle A trip mechanism is used in the 2 phase DC MCB's operating system to trip the circuit when the current flow exceeds a certain threshold. By doing this, harm to the machinery and the circuit itself is avoided. 2 Overload Protection A 2 phase DC MCB's main job is to safeguard the electrical system against an excessive current flow. It has cutting-edge electronics that enable high-speed switching, which effectively and swiftly breaks the circuit and protects the apparatus. 3 Short-Circuit Protection The use of a 2 phase DC MCB in an electrical system provides effective short- circuit protection. The circuit breaker automatically cuts off the circuit when an excess current flows through it, thus preventing damage to the equipment and the system as a whole. For more information about electronic circuit protection devices, please feel free to contact us! Minimum Order: 1 bags Contact:
Phone: Fax: Email: Religare Electric Co.,Ltd.
No.91 Nanyang Road,Zhiguang Industrial Zone, LiuShi Town, YueQing Zhejiang 325603 China SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
© 1996-2024 IMEXBB.com. All rights reserved.
|
|