Other Wireless Networking Equipment

The GP-AG1000 wireless access point product is a wireless access device based on IEEE 802.11ac technology independently developed by GPSENKE technology. The utility model has the advantages of rich functions, high performance and high reliability, which can meet the requirements of WLAN wireless application in industrial scenes. The GP-AG1000 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. Operating in AP mode, it can operate in the 2.4GHz and 5GHz bands simultaneously. Supports four modes: IEEE 802.11a, IEEE802.11 b, IE 802.21g, IEE 8021n and 802.8ac. The highest access rate is 1167 Mbps. ·Full support for 802.11ac technology ·Millisecond Seamless Roaming ·MAC address cloning ·Dual Port Design ·IPv4 / IPv6 dual stack ·Wireless channel multi-terminal simultaneous communication ·Hardware encryption and decryption ·Robust design for harsh environments ·Working frequency band: 2.4GHz 5GHz ·Spatial flow number 2 2 ·Bundling: Support 40Mhz,not recommended 80MHz bundling ·MU-MIMO NA Support ·867Mbps (PHY) NA NA ·400Mbps (PHY) Support Support ·A-MPDU Support Support

Minimum Order: 1 bags

GP-AP1800AX-FS outdoor Access Point product is based on IEEE802.11ax technology independently developed by GPSENKE. GP-AP1800AX-FS support 802.11b/g/n/ac/ax standard, Dual-frequency maximum bandwidth up to 1775Mbps. Can widely used in medical/ treatment/ schools/ underground/ parks/ pipecorridors/ scenicspots/ amusement and other outdoor wireless network coverage. GP-AP1800AX-FS used the newest custom chip optimization algorithm. It have high anti-interference ability, high bandwidth, high standby, strong stability, and support fat and thin integrated mode. The professional integrated outdoor design with IP67 water-proof and wide temperature working ability are very convenient for outdoor installation. ·802.11 b / g / n / ac / ax standard ·Diversified access authentication ·Support 802.11k / v / r protocol ·Support 2 Gigabit LAN + 1 SFP optical slot ·IP 67 protection leve

Minimum Order: 1 bags

DR-AP4029(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board;1 x Onmi Antenna; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure. Planar Antenna ■ 2 x 5G Antenna ■ 5G: 16dbi DRA25 Antenna ElectricalProperties : Frequency Range：2.4~2.5&5.15~5.85GHz Impedance：50Ω VSWR：2.0 Max （≤2.0） Gain(peak)：6±0.5dBi Polarization：Linea , r; Vertical Physical Properties : Cable：RG-141 Cable Connector：N-type PLUG Antenna CAP：ABS OperatingTemp：-40℃~+65℃ Storage Temp：-40℃~+75℃ CableTemp：＜+250℃ Enclosure ■ Dimension: 275x140x48mm ■ UV Protected and Durable ABS Radome ■ IP67 Waterproof Level ■ Support Wallys DR4029

Minimum Order: 1 bags

SIM800C-DS is a complete Quad-band GSM/GPRS solution with LCC and LGA pads, support Dual- SIM, which allows customers to use two SIM cards in one device simultaneously. SIM800C-DS supports Quad-band 850/900/1800/1900MHz, it can transmit Voice, SMS and data information with low power consumption. With tiny size of 17.6*15.7*2.3mm, it can smoothly fit into slim and compact demands of customer design. General features - Quad-band 850/900/1800/1900MHz - GPRS multi-slot class 12/10 - GPRS mobile station class B - Compliant to GSM phase 2/2+ – Class 4 (2 W @ 850/900MHz) – Class 1 (1 W @ 1800/1900MHz) - Dimensions: 17.6*15.7*2.3mm - Weight: 1.3g - Control via AT commands (3GPP TS 27.007, 27.005 and SIMCom enhanced AT Commands) - Supply voltage range 3.4 ~ 4.4V - Low power consumption - Operation temperature:-40℃~85℃ - Specifications for GPRS Data - GPRS class 12: max. 85.6 kbps (downlink/uplink) - PBCCH support - Coding schemes CS 1, 2, 3, 4 - PPP-stack - USSD Specifications for SMS via GSM/GPRS - Point to point MO and MT - SMS cell broadcast - Text and PDU mode - Software features - 0710 MUX protocol - Embedded TCP/UDP protocol - FTP/HTTP - MMS - POP3/SMTP - DTMF - Jamming Detection - Audio Record - TTS_CN (optional) Specifications for Voice - Tricodec – Half rate (HR) – Full rate (FR) – Enhanced Full rate (EFR) - AMR – Half rate (HR) – Full rate (FR) - Hands-free operation （Echo suppression） Interfaces - 77 SMT pins including - SIM Card Interfaces (Dual Standby) - SIM card 1: 3V/ 1.8V - SIM card 2: 3V/ 1.8V - Analog audio interface - RTC backup - I2C interface - USB interface - Serial interface - PCM - SD - GPIO - ADC - GSM Antenna pad - Compatibility - AT cellular command interface

GSM/3G/4G PCB Antenna 850/900/1800/1900/2100 MHz Specification Antenna Connector : HIROSE u.FL(Option) Frequency : 850/900/1800/1900/2100 MHz Gain : 0-2.5dBi Polarization : Linear Vertical VSWR : <=3.5 Antenna Type : PCB Antenna Max Power : 50W Weight : 4g Dimensions : L70*W20*H0.8 mm

U9507E-C1-P is a wireless LTE CAT1 module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/WCDMA/GPS/GLONASS(Optional) network. On LTE-FDD network, U9507E-C1-P enables connect to the Internet at DL data speed up to 10Mbps and UL data speed up to 5Mbps, in the area where LTE service are not available, U9507E-C1-P still enables reliable and secure data connect over WCDMA network. U9507E-C1-P provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc. General features * Output power: - Class 3 (0.25W) for LTE/WCDMA * Control via AT commands (3GPP TS27.005/3GPP TS27.007 ) * Supply voltage range: 3.3V- 4.2V * Low Power consumption - Sleep mode: 5mA - Power down: 50 μA * Dimensions: 51.0 X 30.0X 4.6 mm * Operation Temperature:-40°C to +85°C Band Configuration * LTE-FDD Band 1/3/5/7/8/20/28 * WCDMA Band 1/5/8 Specifications for GPS * GPS frequency: 1575.42MHz * At least support 44 channels * Location accuracy: ＜10m * Sensitivity - Acquisition: -158dBm - Tracking: -162dBm * TTFF: - Cold Start: 60s - Warm Start: 45s - Hot Start: 15s Interfaces * RF connector * PCI Express® Mini Card Interface - Power supply - USB 2.0 high speed - SIM/UIM card interface 3 V, 1.8 V - UART - Analog Audio - PCM * Antenna interface Specifications for data * Support Release 9 Category 4 * LTE-FDD up to 10 Mbps DL,5 Mbps UL * WCDMA up to 42.2Mbps DL,5.76Mbps UL * Transparent mode * PBCCH support * PPP-stack * Coding schemes CS 1,2,3,4 * FOTA * TCP/IP * NDIS Specifications for SMS * Point-to-point MO and MT * SMS cell broadcast * Text and PDU mode GLONASS(Optional): * GLONASS frequency: 1601.7MHz * At least support 44 channels * Location accuracy: ＜10m * Sensitivity - Acquisition: -155dBm - Tracking: -160dBm * TTFF: - Cold Start: 60s - Warm Start: 45s - Hot Start: 15s Additional features * VoLTE * Phone book * PCM * DTMF Approvals * RoHS * CE * GCF

Application: Smart Lock We provide the IoT device ODM service to the clients. IoT (Internet of Things) means devices/objects which are connected to the Internet (or a network) and exchange data with other connected objects. The IoT devices can communicate information or be remotely controlled via the Internet with the Wi-Fi or Ethernet connection, sensors, or other functions. With IoT device ODM service, we have manufactured a lot of products with the IoT related technologies according to what the customers need for their concept. Please check some of them in the following.

Application: Elevator System The concept of IIoT (Industrial Internet of Things) has started to play an important role in the industry field nowadays. It refers to the IoT technology used in industrial environments. It can be a Wi-Fi router, a 56K fax modem, a controller board or even a device combining Wi-Fi router and 56K fax modem. IIoT enhances and maintains the efficiency of the manufacturing process and is one of the technologies which the new concept of Industry 4.0 is based on. With the ability to manufacture quality Wi-Fi devices, we have made several IIoT related products with our customers. Please take a look at some of them showed below.

Application: Canada Farm Monitoring System The concept of IIoT (Industrial Internet of Things) has started to play an important role in the industry field nowadays. It refers to the IoT technology used in industrial environments. It can be a Wi-Fi router, a 56K fax modem, a controller board or even a device combining Wi-Fi router and 56K fax modem. IIoT enhances and maintains the efficiency of the manufacturing process and is one of the technologies which the new concept of Industry 4.0 is based on. With the ability to manufacture quality Wi-Fi devices, we have made several IIoT related products with our customers. Please take a look at some of them showed below.

Application: Tabacco sensor detector We provide the IoT device ODM service to the clients. IoT (Internet of Things) means devices/objects which are connected to the Internet (or a network) and exchange data with other connected objects. The IoT devices can communicate information or be remotely controlled via the Internet with the Wi-Fi or Ethernet connection, sensors, or other functions. With IoT device ODM service, we have manufactured a lot of products with the IoT related technologies according to what the customers need for their concept. Please check some of them in the following.

Application: Automatic UV Light Controller We provide the IoT device ODM service to the clients. IoT (Internet of Things) means devices/objects which are connected to the Internet (or a network) and exchange data with other connected objects. The IoT devices can communicate information or be remotely controlled via the Internet with the Wi-Fi or Ethernet connection, sensors, or other functions. With IoT device ODM service, we have manufactured a lot of products with the IoT related technologies according to what the customers need for their concept. Please check some of them in the following.

Aus.Linx is a Wi-Fi router and 4G router manufacturer with more than 25 years of experience providing wireless networking products such as 4G LTE router and Wi-Fi router including Wi-Fi 6 and Wi-Fi 5 router(*1). Being an experienced Wi-Fi and 4G router manufacturer, we have been producing a wide range of high-quality Wi-Fi routers and LTE routers. Under the ideal factory environment control and management, with professional human resources and discipline, we make excellent products for our clients to maintain the competitiveness. In the following we show you some of the wireless network products we have made. (*1) A Wi-Fi 5 router was known as an 802.11ac router. The standard 802.11ac started to be called "Wi-Fi 5" since 2018. And Wi-Fi 6 is the next generation, also known as 802.11ax.

Model: CJ3422 Description: Model No: CJ3422 Stripping size: 3.6" stripper for glass fiber optic Ø0.254mm (0.010") & 0.3mm (0.0125") Model No: CJ3422A Stripping size: 3.6" stripper for plastic fiber optic Ø0.023mm (0.040") Stronic Tools has been producing Electronic and Computer Maintenance Tools since 1987! For nearly 35 years, professionals and home hobbyists have come to rely on the excellent service and quality products that Stronic Tools provides.

Model: CE8031 Description: CF8031 6 IN 1 Interchangeable screwdriver Size: 5, 6mm. #1, #2. 1/4", 5/16". Model no Color CF8031A Red CF8031B Blue CF8031C Orange CF8031D Green CF8031E Black