Valves

DN15 - DN100 Pressure PN25 Brass Ball Valve Cw617n Or HPB59-3 Product Description Brass Ball Valve are used for a variety of applications including oil & petroleum, and water. They are steam rated with PTFE stem packing. Pressure ratings are 25 bar/362.5 psi). EN13828 CE ACS(1101) approval. Ball & stem nickel-then-chrome plated for smooth operation. Parameters Item: Ball Valve Size: 1/2" - 2" Brass material: CW617n Connection Type: Female G x Female G Handle Material: IRON / AL Handle Type: Lever Stem Type: Blowout Proof Stem Material: Brass Seat Material: PTFE Body Seal Material: PTFE Ball Material: Chrome Plated Brass Valve Basic Body Material: Brass Surface Treatment: Nickel Plating Application: Can be used for oil & petroleum, and water Max. Temp: 20°C to+120°C Working Pressure: 30bar/435psi Port: All Features: Thread Standard Diameter Standards: EN13828

High Thrust 2500N HVAC Valve Actuators Electric For Control Valve IP54 Valve size: DN65 to DN125 Thrust range: 1000-2500N

Product Description The four-way reversing ball valve is an X-shaped vertical channel ball valve. Its feature is that the two channels of the ball are X-shaped, and the diameters of the four channels are evenly distributed on the equatorial circumferential section of the ball. When the ball rotates 90 clockwise, the two opposite channels can be interconnected. Four Way BALL Valve Technical Parameters Design standard API6D,ASME B16.34 Connection ends Flange Flange Connection ASME B 16.5 Channel Form Four Way Materials WCB Actuator Pneumatic Feature Four Way Ball Valve Integrated structure, less flange connection, high reliability,low piping stress. Use anti-static and anti-off device design. Can lock the switch position for preventing misoperation. Designed light weight.

The two-piece ball valve can be divided into straight-through type, three-way type and right-angle type according to its channel position. The latter two ball valves are used to distribute the medium and change the flow direction of the medium. Two-piece ball valve installation and maintenance should pay attention to: 1. Leave the position where the valve handle rotates. 2. Cannot be used as throttling. 3 The ball valve with the transmission mechanism should be installed upright. Product name PVC Two Piece Ball Valve Structural form Fixed ball valve Flow direction bidirectional Size 1/2" to 4" Material PVC UPVC Type (channel location) Straight-through

Smart valve positioner, dust explosion-proof ExtD, angular stroke, single acting, fail lock, stainless steel corrosion-resistant, split body anti-high temperature vibration High availability and easy interpretation are the key success factors in effective field device data analysis. smart valve controllers support standardized technologies and ensure the availability and usability of diagnostics information independent of your control, safety or asset management system. Performance indicators Item Indicator Input signal 4~20mA or 4~20mA+HART, split-range control can be set Sensor type flameproof stucture rotary Gas source pressure 1.4~6bar; no oil, no moisture, no dust and dirt Journey 0~120º Input resistance 490☊(max.)/20mA(DC) Electrical interface M20*1.5 or customized Pneumatic interface NPT1/4 Repeatability ±0.3%F.S. Linear ±0.3%F.S. Hysteresis ±0.3%F.S Sensitivity ±0.2%F.S Output characteristics linear, quick opening (25:1, 50:1), equal percentage (1:25, 1:50) Protection class IP66 Explosion-proof grade ExtDA20IP66T85℃ Security level SIL3 Fault state fail lock Off power, off signal, the valve maintains position; add air lock valve to realize three-break position maintenance Operating temperature -30℃~85℃ (host), -40℃~110℃ (sensor) Material 316 stainless steel Gross weight Main unit 3Kg, sensor 1Kg Dimensions 162L*152W*182H (mm) Product application field TORLEO brand TOP-5879F1 series smart valve positioner are used in conjunction with pneumatic control valves, and are widely used in metallurgy, power generation, paper-making, environmental protection and other industries where process control is required. Typical valve application Diaphragm control valve, single-acting ball valve, single-acting butterfly valve Technical features of the product Nozzle baffle + symmetrical membrane valve structure, strong ability to resist dust, moisture and oil; Built-in keyboard and large LCD screen, the positioner can be debugged without a handheld operator; HART communication, modular design, convenient for users to choose and use; Valve position output, modular design, convenient for users to choose and use; Configure linear, quick opening, equal percentage and user-defined flow characteristics; One-key auto-tuning operation to meet the needs of users for quick installation and fool-like debugging; PID compound control algorithm can achieve 0.1-0.3% control accuracy.

Low temperature globe valve is suitable for the management system of cryogenic liquid storage and transportation equipment (such as tank truck or tanker, LNG station). It has the characteristics of flexible switch and reliable sealing, and can also be used in other low temperature and cryogenic medium management systems. Construction is as follows Name Cryogenic Globe Valve Size 1/2"~10"; DN15~DN250 Normal pressure Class 150/300/600/900; PN16/PN25/PN40/PN64 Design standard BS 6364,MESC SPE 77/200,BS1873,ASME B16.34; DIN3356, EN13709 Marked MSS SP-25 End flange ANSI B 16.5,ASME B16.47; EN1092,DIN2543~DIN2547,AS2129 Face to Face ANSI B 16.10,API 6D; DIN3202,EN558-1,EN12982,ISO 5752 Test standard BS 6364,MESC SPE 77/200,API598,API 6D; DIN3230, EN12266,ISO 5208 Suitable temperature -196~+80°C Medium LNG, LO2,LN2, Lar Acidic environment NACE MR0175 Operation Handwheel Operated,Gear Operated, Electrical Actuated

Pulse Damper is a device for eliminating pipeline pulsation and an accessory for metering pump. PVDF Pulse Damper can smooth the pipeline pulsation and water hammer caused by metering pump, diaphragm pump. etc. The medium is isolated by a corrosion resistant diaphragm, the PP Pulse Damper is smoothed by changing of the volume of the gas chamber.   Shell Material: PVC. PP. PVDF. SS304. SS316 Diaphragm material: FPM, PTFE Functional Characteristics  1. Reduce the harm of water hammer to the system 2. Reducing the peak value of velocity fluctuation 3. Protect pipelines and valves from pressure fluctuations 4. Improve the working environment and performance of metering pump 5. Allow the system to use smaller diameter pipe and reduce costs 6. Cooperating with back pressure valve can make the pressure fluctuation of pipeline close to zero. 7. Reducing system energy consumption

Minimum Order: 20 square metres

CPVC Plastic Solenoid Valve two way with excellent property of anti corrosive,Stainless Steel Solenoid Valve Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2",PVC Solenoid Valve voltage AC 220V 110V 24V DC 24V 12V, IP 65.Brass Solenoid Valve application for corrosive chemical medium, water treatment system, etc. Stainless Steel Solenoid Valve connection female thread, socket weld and flange for optional,Plastic solenoid Valve workiong pressure PN6.  Featurers: 1, Medium: acid, alkali, corrosive liquids 2, Working temperature: -5~90℃ 3, Working pressure: 6 bar 4, Working Type: Normial close 5, Body Material: CPVC 6, Seal Material: Viton 7, Connection: BSPT, socket, flange 8, Voltage: AC 220V 110V 24V DC 24V 12V, 50/60Hz 9, Protect: IP65 10, Size:/2"~2"

Minimum Order: 20 square metres

PVC Foot valve model RPV147 is a socket type plastic bottom valve, CPVC Foot Valve Made by PVC, CPVC, PP material with light duty for water class. this type PVDF Foot Valve is usually used for water system, water treatment, finishing farm, etc. this model PVC Foot Valve also have flange type for optional with standard fit for DIN PN10, JIS 10K and ANSI CL150.  RMI PLAST brand PVC foot valve with the specifications as follows: Basic specication Size: DN15~DN80 (1/2 inch ~ 3 inch) Body Material: PVC-U;PVC-C;PP-H Seal material: EPDM Socket connection: DIN,ANSI,JIS,CNS Design pressure: 1.0Mpa(PN10 bar) Feature of valve Single union basket design easy to replace the inner parts of valves   Hollow ball design make the valve seal better   Simple structure make it easy to diagnose problem and repair valve   Flange end is optional.  

Minimum Order: 20 square metres

RMI PLAST offer high quality spring type safety valve made by plastic, include PVC safety valve, CPVC safety valve,PP safety valve,PVDF safety valve. the pressure regulating range from 0-1.0Mpa, PVC safety valve size from DN15 to DN65, socket and flange end for optional ,design as per standard DIN, ANSI, JIS, BS. UPVC safety valve made by UPVC body, with PTFE/EPDM diaphragm and sealing. easy to operate and maintenance.  Safety valve is a special valve whose opening and closing parts are normally closed under the action of external force. When the medium pressure in the equipment or pipeline rises beyond the prescribed value, the medium is discharged to the system to prevent the medium pressure in the pipeline or equipment from exceeding the prescribed value. Safety valve is an automatic valve, mainly used in boilers, pressure vessels and pipes, control pressure does not exceed the prescribed value, play an important role in protecting personal safety and equipment operation. Product Features of PVC safety valve: 1, Compact structure and stable performance 2, Easy installation and debugging 3, Sensitive reaction and good reproducibility 4, Selective large size range DN15mm DN65mm 5, Small pressure difference by specially designed flow structure to avoid forming a closure 6, Easy to set the working pressure by regulating device 7, Installed in the bypassas overflow valve use 8, Used as anti siphon valve to prevent gravity under static conditions.

Minimum Order: 20 square metres

PVC Non Check Valve DIN PN10 model RPV141 is a swing type non return valve, the PVC Wafer Check Valve flow can only get through by one direction, PVC Swing Check Valve  is flange connection fit standard DIN PN10. PVC non return valve model RPV141 is suitable for horizontal installation only, PVC Ball Check Valve size from DN15 to DN300, PVC check valve is suitable for chemical industrial for acids and alkali medium. PVC Non Check Valve DIN have the specifications as follows: Basic specication Size: DN15~DN300 (1/2 inch ~ 12 inch) Flange connection: DIN PN10; ANSI CL150; JIS 10K Body Material: PVC-U; PVC-C; PVDF; PP-GF; PP-H Seal material: EPDM; FPM Design pressure: 0.5~1.0Mpa (PN5~10 bar) Feature of valve All the parts that will touch medium is made from thermo plastic and rubber. Suitable for horizontal installation only. Bolted bonnet is convenient for inspect the valve, fix and replace the inner part. Strengthed flange struction make bolted connection stronger

Minimum Order: 20 square metres

PVC Diaphragm Valve Union Type PN10 is a new developed diaphragm valve, the difference between flange type diaphragm valve and union type diaphragm valve is union type is more convenient to installation and replace of valve. the union type diaphragm valve is usually for small size from DN15 to DN100, connection end by different standard of DIN, ANSI, JIS, CNS. this type PVC diaphragm valve is used for wate treatment application.  RMI PLAST offer UPVC diaphragm valve union type with the specifications as follows: Basic specication Size range: DN15~DN100 (1/2 inch ~ 4 inch) Body materials: PVC-U Diaphragm material: EPDM Socket connection: DIN Design pressure: 1.0Mpa (PN10 bar) Feature of valves Body and diaphragm that touch medium are made from plastic and rubber.  Socket connection for easy installation.  Pneumatic operation is optional

Minimum Order: 20 square metres

PVC Ball Valve is one piece body compact ball valve, PVC Ball Valve has socket end and thread end connection, socket end have DIN, ANSI, JIS, CNS standards available, and thread end offer BSPT and NPT for optional. as PVC Union Ball Valve is cheap and easy to installation and operation, PVC Ball Valve Flange is widely used in water supply and agriculture irrigation. Ningbo RMI Plastic Co.,Ltd offer PVC Octagon Ball Valve with specifications as follows: Basic specication Size:DN15~DN100 (1/2 inch ~ 4 inch) Socket connection:DIN; ANSI; JIS; CNS Thread connection:NPT,BSPT Ball Material:PVC-U Body Material:PVC-U Seal material:Rubber Design pressure:1.0Mpa(PN10 bar) Feature of valve One piece body with no leaking risk.   Simple construction easy to install.   Different colors of body and handle for optional.   Octangle body is optional.   OEM service is offered  

Minimum Order: 20 square metres

CPVC Butterfly Valve Lever Handle JIS 10K is wafer type plastic butterfly valve, connection fit standard JIS 10K, size from 2" to 8". operated by hand lever. valve is made by CPVC body and disc, EPDM and VITON seat seal for optional, steel and stainless steel stem available. RMI PLAST CPVC butterfly valve is used for industry pipelines for chemical mediums. it has excellent property of anti-corrosive. widely used in chlor alkali industry. RMI PLASTIC offer CPVC butterfly valve JIS with specification and features as follows Basic specification Size: DN50~DN200 (2 inch ~ 8 inch) Body Material: CPVC, PVC-C Seal material: EPDM, Viton, FPM, FKM Wafer connection: DIN PN10; ANSI CL150; JIS 10K Design pressure: 1.0Mpa (PN10 bar) Feature of valve Disc and seat that touch medium are made from plastic and rubber Multi-hole fit for different standards connection     Valve is easy to assemble and disassemble to change damaged parts   Dry-stem are optional     Electric and pneumatic actuator mounting are available

Minimum Order: 20 square metres