Tools & Hardware

QDLF stainless steel multistage vertical centrifugal pump is a multi-functional product of non-self-priming multi-stage centrifugal pump with standard motor. The motor shaft is directly connected to the pump head by a shaft coupling. And the pull rod bolts fixes the pressure cylinder and the flow components between the pump head and the inlet and outlet water section. The pump inlet and outlet are on the same line at the bottom of the pump. The pump can be equipped with intelligent protector according to the needs so as to effectively protect the pump from dry rotation, phase loss and overload. QDLF stainless steel multistage vertical centrifugal pump is widely used to transport a wide variety of media from tap water to industrial liquids with different temperature, flow and pressure ranges. QDL vertical multistage centrifugal pump is for non-corrosive liquids and QDLF stainless steel pump is for mildly corrosive liquids. QDLF pumps are widely used in many industries, for example, water supply: water plant filtration and transmission, water plant sub-district feed, main supercharging, high-rise building supercharging; Irrigation: farmland irrigation, sprinkler irrigation, drip irrigation; Industrial liquid transport: cooling and air conditioning systems, boiler feed and condensing systems, machine tools, acid and alkali; Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool; Industrial pressurization: process water system, cleaning system, high-pressure flushing system, fire protection system, etc. Operating conditions of QDLF pump: 1. Thin, clean, non-flammable and explosive liquid without solid particles or fibers. 2. Liquid temperature: normal temperature: -15℃ to +70℃; hot water: +70℃ to +120℃ 3. Ambient temperature: maximum +40℃ 4. Altitude: the maximum is 1000m

Minimum Order: 1 bags

WQ/QW Submersible sewage pump Pump material: cast iron or stainless steel Motor: Normal Submersible motor or explosion proof submersible motor (IP68), 50HZ/60HZ, 380V/440V/220V etc Pumped medium: wastewater or waste liquids with solid grain or fiber etc impurity Medium temperature: Normal temperature type or high temperature type up 100 DegC. QW Submersible sewage pump is the complete pump unit with automatic coupling device and guide rail for convenient installation and maintenance etc. Impeller can be with agitator device or large flow channel or spiral cutting impeller etc to improve the passing capacity of sewage or sediment Application: 1.Waste water discharge in factory and commercial zone 2.Waste water discharge in city 3.Water discharge station in residence. 4.Floodwater discharge 5.Sewage discharge in hospital and restaurant. 6.Sewage system of municipal works 7.Transport machine in mine and detection 8.Gardening in farm

Minimum Order: 1 bags

IS horizontal single stage single suction clean water centrifugal pump is used for industry, agriculture and urban, drainage, fire water supply, etc. IS end suction pump is for suction and delivery of clean water and other similar liquid of physical and chemical properties. The liquid is without solid particles. So, it is widely used in industry, agriculture, urban drainage, fire water supply and so on. IS centrifugal pump is designed according to the performance and dimensions specified in the international standard IS02858, and its technical standards are close to the international standard, reaching the international advanced level. It is one of the energy-saving pump products popularized in China. This pump has simple structure, reliable performance, small volume, light weight, good cavitation resistance, low power consumption, easy to use and maintain. IS horizontal centrifugal pumps have wide versatility. The whole series has 140 specifications, but only four shafts. The bearing, shaft seal is the same for the same specification shaft. There are only four kinds of suspension frame for the whole series of pumps. IS type clean water centrifugal pump is rear open type. It is not necessary to remove the suction and discharge pipelines when the pump cover and impeller are disassembled. Two ball bearings are mounted in the suspension frame and lubricated with machine oil or grease. The pump is driven directly by an electric motor through an elastic coupling. The vortex chamber, foot, inlet flange and outlet flange are casted as a whole.

Minimum Order: 1 bags

Gear oil transfer pump Horizontal, self priming gear pump is used to transfer lubricating oil or other fluids similar to lubricating oil without solid particles and fibers at the temperature below 200 degree celsius and the viscosity of 5 to 1500 Cst. It can be also used in hydraulic system. Reducing the rotary speed, the pump can deliver the liquids whose viscosity can be up to 500,000Cst. YCB gear pump is mainly composed of gear, shaft ,shaft sleeve, pump body, pump cover and seal etc. The gears are adopted double circular teeth shape, which makes the gears less wear on gear surface, stable revolution, low noise,long service life and high efficiency. Seals can be mechanical seal or packing seal, which can be chosen according to the user’s requirements. Application: 1. as transfer pump or booster pump in oil delivery 2. as fuel pump for delivery system, pressurization and injection in fuel supply system. 3.as the firefighting equipment to transfer foam liquid 4. as hydraulic pump supplying hydraulic power in hydraulic system 5.as lubricating pump in all industry fields.

Minimum Order: 1 bags

Fluoroplastic magnetic driving chemical industrial pump The flow parts of CQB-F fluorine plastic magnetic chemical pump are for fluorine plastic (F46/PFA/FEP/PTFE/ETFE/PVDF etc.) materials. Pump outer casing is for metal material (cast iron or carbon steel) to be enough for supporting pipeline weight and resisting mechanical impact. Flow parts of CQB-F fluoroplastic liner magnetic pump are made of fluoroplastic (F46/FEP/PFA) and have a very good corrosion resistance. CQB-F fluoroplastic liner magnetic pump can transport any concentration of acid, alkaline, oil, rare and valuable liquid, toxic liquid, volatile chemical medium. It is especially suitable for the transport of flammable, leaky and explosive liquid chemical medium. Sliding bearing of magnetic pump can be impregnated graphite, filled with polytetrafluoroethylene, engineering ceramics, etc. Because engineering ceramics have good heat resistance, corrosion resistance and friction resistance, the sliding bearings of magnetic pump are mostly made of engineering ceramics. Because the engineering ceramics are very brittle and the expansion coefficient is small, the bearing clearance shall not be too small to avoid shaft holding accident. CQB-F Fluoroplastic chemical industry magnetic pump has the advantages of compact structure, beautiful appearance, small volume, low noise, reliable operation and so on. CQB Fluoroplastics magnetic driving centrifugal chemical pump can continuously transport acid, alkali, oxidant and other corrosive media with arbitrary concentration. Applicable temperature: -30degree celsius to 120 degree celsius.

Minimum Order: 1 bags

Horizontal sewage self-priming pump ZW self-priming centrifugal pump adopts axial backflow outward mixing. It does not need to install the bottom valve and irrigation water and the pump can suck the liquids. ZW self-priming pump is equipped with the impeller of wide flow passage and volute house. All engineering sewage and slurry containing large particles solid and long fiber garbage, such as sewage, sediment, waste ore impurities, etc., can be pumped out. It has the characteristics of simple structure, good self-priming performance, strong discharge capacity of sewage, high efficiency and energy saving, convenient operation and maintenance, etc. ZW horizontal self-priming sewage pump is widely used as sewage pump, impurity pump to transport sewage or wastewater containing large particles and long fiber etc. impurities.ZW self-priming pump is suitable for chemical industry, petroleum, pharmaceutical, mining, papermaking, fiber, pulp, textile, food, power plant and municipal sewage engineering, public facility sewage disposal, river pond culture and other industries. It is an ideal impurity pump for pumping the liquid with solid particles, fiber, slurry and mixed suspension. Pump material: cast iron or stainless steel Pumped solid diameter: The diameter of suspended particles is 60% of the pump diameter, and the fiber length is 5 times of the pump diameter. Suction height:4.5m-5meters

Minimum Order: 1 bags

KJB series corrosion-resistant and particle resistant centrifugal pump has a plastic body molded as a whole, which is reliable and thick. It is surrounded by a metal jacket on the outside, with a sturdy structure and stable operation. It can effectively prevent adverse effects such as aging of plastic molded parts caused by long-term outdoor operation. The overcurrent components are made of non-metallic materials such as UHM-WPE and PVDF, which are corrosion-resistant and wear- resistant. Although the pump has a semi open impeller, it benefits from advanced hydraulic design and has high efficiency. Adopting unique particle resistant containerized single and double end mechanical seals, the installation dimensions comply with ISO2858/GB5652 standards. We can configure corresponding flushing solutions according to customer needs, which are widely used in fields such as acid washing, environmental desulfurization, denitrification, chemical industry, papermaking, dyeing, sewage treatment, etc. The pump runs stably and has strong anti-cavitation performance, especially suitable for acidic, alkaline and corrosive media containing particulate impurities. It has the advantages of high efficiency, energy saving, low noise and vibration, high reliability, and long service life, making it an ideal conveying equipment for chemical, acid washing, environmental protection, and sewage treatment. Operating temperature -20 degree Celsius to 140 degree Celsius, flow rate: 1- 1000m3/h, lift: within 5-80m.

Minimum Order: 1 bags

Our fiberglass backing is made of fine materials, it is mainly to use as the plate of the flap disc. We have many kinds of models which are widely used for different application.

As it is always known, diamond wires can help you renovate, demolish and dismantle houses, bridges and large buildings. ChinShine as a professional diamond cutting blade manufacturer provides you with high-quality diamond wire saws to ensure efficiency and reduce costs. The Performance Of Chinshine Concrete Diamond Wire Saw The performance of the ChinShine Concrete Diamond Wire Saw: granite diamond wire saws are commonly used to cut all kinds of concrete in various projects where diamond saw blades are not suitable. The main properties of diamond rope saw are. - Applicable to cutting bridge piers, irregular reinforced concrete, chimneys, beams, and other reinforced concrete blocks or slabs. - Underwater cutting can be carried out on concrete where diamond saw blades cannot be used. - Safe operation, low labor intensity, low noise, no dust, and environmental protection. - Low cutting cost and high cutting efficiency. - Flexible and convenient installation, can be used for vertical cutting and horizontal cutting. - It can reach the concrete cutting depth which cannot be reached by hydraulic wall saw blade. - The cutting depth and length are not limited, and it is highly adaptable to different working conditions. It is the best choice for backup diamond tools for hydraulic wall cutter. The Advantage Of Rubber Concrete Cutting Diamond Wire Saw Rope - Rubber better supports and adheres to diamond beads and steel wires and thus better prevents the action of abrasive pastes, especially when the radius of curvature of the wire is small. - Rubber readily resists temperature increases due to poorly controlled water cooling (which often occurs in concrete work), whereas plastic softens and loses its strength properties for diamond beads and wire. - Flexible steel wires work better with high-quality rubber, thus reducing the risk of uneven wear of the diamond beads resulting in uneven and non-uniform cuts. - 30-55KW wire saws are mostly used for concrete cutting wire saws and the water feed is set between 20-40 L/min depending on the specifications of the cutting object. Tips For Using Concrete Diamond Wire Saws - The movement of the diamond wire saw should be checked from time to time to avoid accidents. - The consumption of diamond beads should be checked from time to time to avoid uneven cutting. - Wear and tear of the joints, springs, and diamond beads near the joints should be checked. The joints should be replaced if necessary. - The tension of the wire is set between 250-300kg. - Adjust the wire speed of the diamond rope saw according to the characteristics of the concrete to be cut. - At the beginning, the wire speed should be reduced by 2-3 m/s from the above standard. - The recommended water supply for wire sawing of concrete is 10-20 liters/minute.

Vacuum Brazed Wire: *44 beads per meter *Bead diameter 10.5/11.5mm *Segment Type: Vacuum brazed/ Granite diamond wire *Lengths: 50m /100m *Concrete, Highly reinforced concrete, Bridge/Heavy Industrial, Underwater Cutting, Steel, Nuclear etc. The invention of diamond vacuum brazed wire saw rope is one of the most important breakthroughs in diamond wire saw manufacturing technology. Brazed wire saws are sharper and more efficient than sintered wire saws. Compared with electroplated rope saws, the sharpness and durability are not inferior to electroplated rope saws, but more environmentally friendly and cost-effective, brazed rope saws are gradually replacing electroplated rope saws. Why More And More Customers Choose Chinshine Vacuum Brazed Wire Saws? 1.ChinShine selects high-grade diamond powder and metal powder, scientific ratio. 2. Europe imported concrete cutting diamond wire saw rope materials, with high strength bending, bending strength, cutting stability. 3. ChinShine using 2.1 bead working layer, brazed wire saws overall life increased, while improving the cutting efficiency.

ChinShine, a diamond cutting blade manufacturer a full line of diamond chain saws for cutting concrete, brick, and natural stone. ChinShine’s diamond chain saws are similar to regular chain saws, but use laser-welded diamond segments on the edge of the chain. Diamond chainsaw is used on gasoline or hydraulic power, and the diamond chain saws is lubricated with water because of the high friction and removal of dust. Brand Name: ChinShine Place of Origin: Quanzhou, Fujian, China Chain Pitch: 3/8" / 0.45". Chain Guage: 0.063"(1.6mm) Raw Material: high-quality imported steel Fit machine: ICS machine, STHIL machine Application: concrete, stone, construction material The chain saw machine is used in construction, for example, to cut deep square holes in walls or floors, to remove large stones before carving, to enter the building by the fire department and to repair the building and with minimal damage to the surrounding structure Monument with parts removed. Recently, a laser welding diamond chain for concrete chainsaw with a 230-volt electric motor was also developed. Because the material to be cut is not fibrous, springback occurs much less. Therefore, the most commonly used cutting method is plunge cutting, in which the tip of the blade is pushed into the material. Using this method, a square cut as small as the blade width can be achieved. If the concrete block moves when it is almost cut through and clamps the blade, it may push back, but overall, the concrete chain for chainsaw is less dangerous than a wood cutting chain saw.

Brand Name: ChinShine Place of Origin: Quanzhou, Fujian, China Chain Pitch: 3/8″ / 0.45″. Chain Guage: 0.063″(1.6mm) Raw Material: high quality imported steel Fit machine: ICS machine, STHIL machine Application: concrete, stone, construction material 3/8” Size 0.063 Diamond Chain Saw  Blades for Concrete Cutting Applications In terms of process innovation, ChinShine utilizes 3 key technologies (1) Welding Technology - Diamonds are aligned. It forces the diamonds to be evenly distributed in the saw blade so that each diamond is subjected to the same pressure when cutting. The use of this technology will optimize service life and cutting ability. (2) Laser welding technology - Jumping It minimizes the negative effects of plasma generated during the laser welding process. As a result, our diamond concrete chain saws have reached the world's advanced level. (3) Combined with sealing technology Laser-welded diamond segments using sealing technology have a longer service life than competitive chains. Application Pitch Remarks For concrete cutting 0.45" / 3/8" all sizes available For sandstone cutting 0.45" / 3/8" all sizes available ChinShine, a qualified diamond cutting blade manufacturers, is equipped with high-frequency technology, making it a very powerful electric chain cutting machine. The high power output and low vibration make the machine very efficient and easy to use. With the diamond chainsaw it is possible to cut 450 mm deep from one side, making the machine an excellent complement to a wall saw to avoid excessive cutting in corners. It is also ideal for cutting irregularities or small openings (as small as 11x11 cm). The ChinShine product line enables you to combine the most effective systems for your business. Buy ChinShine diamond chain for chainsaw blade, get your suitable concrete cutting tool!

1) Special Design for high quality demand. 2) Dry and Wet Cutting 3) Diamond Cutting disc for Granite. Fast cutting, Long life, High universality. 4) Both Standard Core and Reinforced Core are available. 5) Recommended to be used on Power Manual Saw Machine Application of hot press sintered concrete cutting disk: Designed for granite, marble, concrete materials, ceramic tiles, engineering bricks, masonry materials, hard aggregates and hard clay roof tiles. 115mm, 125 mm, 150mm, 180 mm 230 mm diamond cutting disc for granite, we design and export this kind of cutting disc for European and Palestine market mostly, top quality with competitive price.

Welding: Laser welding Saw Machine: Angle grinder Cutting: Concrete Segment Type: turbo diamond segment, normal diamond segment, arix segments Advantages: safe cutting, segments would not drop down during cutting, fast and long life cutting disc, it is 3 times longer life than hot and cold press diamond cutting disc. Laser welding diamond cutting disc is one of the best concrete cutting disk, it is for fast & reliable concrete, brick Cutting, compatible with all kinds of angle grinders. Stronger laser welding diamond segments combines aggressive and sharp cutting ability. Steel core is made from high alloy, heat-treated steel. ensuring complicated cuts as well as a disc operation that is characterized by smoothness and a low level of vibrations. Concrete wall saw is for Hard and Continuous use by professionals in construction, concrete fabrication and general maintenance workers.