Tools & Hardware

About Swivel Jack Base A scaffold swivel base jack is a scaffold screw jack that consists of a swivel base plate, a threaded stem, and a scaffold jack nut handle, designed to provide stability and facilitate height adjustments in scaffolding systems. Scaffold swivel base jacks are essential for setting up scaffolding on uneven ground and ensuring the scaffolding is leveled at the required height, thereby facilitating safe and stable construction work. Specification Diameter: 28/30/32/34/3 , 5/38/48MM etc Length: 200/280/600/760MM etc, or customized Base Plate size: 20*120*5MM 150*150*5MM etc, or customized Color: black, silver or colored galvanized Material: cast steel, cast iron, drop hammer forging Surface treatment: hot-dip galvanized, electronic galvanized Export packaging: pallet wire packing. Contact us to start the conversation today. Types of Swivel Base Jacks There are different types of Swivel Base Jacks, including Solid Stem Swivel Base Jacks and Hollow Stem Swivel Base Jacks. Solid Stem Swivel Base Jacks have a solid rod, while Hollow Stem Swivel Base Jacks feature a hollow tube design. These jacks are commonly used in construction and scaffolding to provide adjustable support and stability. Why Gongde Swivel Base Jacks Gongde Swivel Base Jacks are a top choice due to their position as one of China's largest and most reputable scaffolding swivel base jack manufacturers. Gongde Swivel Base Jacks meet ISO9001 and En74 standards, boasting advanced structures and exceptional durability that eliminates the risk of scaffold collapse caused by screw breakage. Gongde ensures quality control at every stage, from raw materials to welding, guaranteeing safe load-bearing capacity for construction. Customized sizes are available to meet your specific requirements, and they offer free samples. Rigorous testing is conducted on all Scaffolding base jacks to ensure their ability to safely bear weight during construction, making them a reliable option for scaffolding needs.

Gongde Steel Scaffold Boards are constructed from hot-dip galvanized steel, ensuring increased durability and corrosion resistance. They fully comply with the GB/T 228.1-2010 standard, guaranteeing quality and safety in scaffolding applications. The steel scaffold boards are manufactured in a China factory, are cold-processed for product consistency. And the surface is printed with concave and convex holes to allow the surface to drain and provide a safe non- slip platform underfoot.  Galvanized Steel Plank Specification Length: 1m, 1.5m, 2m, 3m, 4m Width: 250mm Height: 45mm Thickness: ,  1.0mm, 1.2mm, 1.5mm Material: Q235B Weight: 4.5kg-14kg Executive standard: GB/T 228.1-2010 Packaging method: packed with straps, 51 piece per bundle. Surface treatment: Hot galvanizing Function: It is not only used on construction sites, but also on other occasions. Its advantages are light weight, durability, easy to install and use.  Gongde Galvanized steel plank has a variety of specifications and models. You can choose the appropriate specifications according to different needs and are suitable for various construction sites, such as bridges, houses, roads, etc.   Scaffold Plank Product Advantages: The unique drilling design of the construction steel springboard solves the problem of surface drainage and is suitable for construction under various weather conditions. When hot-dip galvanized steel springboards are used for construction, the number of steel pipes used to build the scaffolding can be appropriately reduced, which not only saves materials for the construction party but also improves construction efficiency. Scaffolding Steel Boards have great advantages not only in terms of materials but also in terms of economy. They reduce maintenance and are easy to use. They are popular in the construction industry and are indispensable equipment in the construction industry. Nowadays, the construction industry is in full swing, and there are many demands and requirements for these building materials, all of which promote each other. Scaffolding Steel Boards are fire-proof, sand-proof, light weight, corrosion- resistant, alkali-resistant and have high compressive strength. The concave and convex holes on the surface and the I-shaped design on both sides are particularly effective than similar products. The hole spacing is neat and standardized, and the appearance is beautiful and durable. Durable (can be used continuously for 6-8 years under normal construction). The unique sand leakage hole technology at the bottom prevents sand accumulation, and is especially suitable for use in the coating and sandblasting workshop of shipyards. When using scaffolding steel boards, the number of steel pipes used in scaffolding can be appropriately reduced and the construction efficiency can be improved. The price is lower than wooden boards, and 35%-40% of the investment can still be recovered after many years of scrapping. Features: 1. Galvanized steel scaffolding Planks have a high recycling rate, long service life, are easy to install and disassemble, and can still pay garbage disposal fees after being scrapped. 2. The unique convex hole design of the Scaffolding Steel Boards can not only reduce its own weight, but also prevent slipping and deformation. The I-shaped design on both sides increases the fastness and strength, prevents sand accumulation, and makes it beautiful, sturdy and durable. 3. The unique shape design of the Scaffolding Steel Board makes it easier to bundle, hoist and install, and it can be stacked neatly when not in use. 4. The scaffolding steel boards is made of cold-processed carbon steel. Through hot-dip galvanizing technology, the service life can reach about 5-8 years. 5. The use of scaffolding steel boards has become a trend at home and abroad, which has greatly improved the company's construction qualifications and brought about a big turnaround.

Janice, from Canada, wants to purchase 600 hydraulic relief valves. The core difficulty of this hydraulic relief valve lies in the processing of valve elements. Most factories can only bemoan their inadequacy for the valve elements with inclined holes and included angles. The American hydraulic relief valve manufacturer who has been cooperating with Janice has failed 4 times in 30 days and had to surrender. Janice found more than 20 hydraulic relief valve manufacturers online and offline, at home and abroad, but they either replied that there was no time for sampling or no response. Janice has been tossing about for a week and is a little frustrated. Pablo, an old customer of AAK, after learning about Janice's procurement problems, suggested that she send the hydraulic relief valve drawing to AAK for a try. Pablo also specially wrote me an email to ask AAK to help Janice. I am willing to try to solve such a difficult problem of hydraulic relief valve. Once it is solved, I have won the admiration of two people at the same time. According to the hydraulic relief valve drawing sent by Janice, except for the valve core, other requirements are also conventional. The valve core of this hydraulic relief valve is different from the conventional straight hole valve core, which is marked in the drawing Φ4- Φ3.7mm inclined hole, and the axis line of the Φ3.7mm hole forms an included angle of 60 ° with the axis of the valve core parts. It is difficult and requires high precision in the clamping and positioning process of hole processing. The hydraulic relief valve manufacturers without high-precision equipment and over 15 years old technicians will fail even if they try to make samples for 100 times. AAK technical team discussed for 2 days, and they were 70% confident that the sample would be successful. Although Janice is a little disappointed, it is also the best news she has received recently. She is in urgent need of this hydraulic relief valve. AAK has been brainstorming for 2 weeks, constantly changing the material of the hydraulic relief valve core, adjusting the process parameters, and sending the hydraulic relief valve sample for the first time. After 5 days, Janice informed that there was an error of 0.1% in the inclined hole of the hydraulic relief valve spool. AAK carried out the second hydraulic relief valve sample and optimized the process again on the high-precision turning milling composite locomotive to improve the accuracy of the inclined hole. A few days after AAK's second hydraulic relief valve sample was sent, Janice sent an e-mail. The American manufacturer spent 4 weeks on this hydraulic relief valve, but all 4 samples failed. She tossed and turned for a week and failed to find a hydraulic relief valve manufacturer that dared to make samples. However, AAK succeeded in 2 proofing within 2 - 3 weeks. AAK high-precision turning milling compound machine tool is the core of the success of the sample. This machine tool is equipped with upper and lower tool towers. The main shaft can be 360 ° indexed. The upper shaft is the milling main shaft, with a rotation angle of 225° and 40 tools. At the same time, it can complete the machining of axial hole, radial hole, inclined hole drilling and reaming, inclined groove and tapping under one-time clamping. The key to the success of AAK sample is our old technician, who has 32 years of practical operation experience. With specially assigned person and special machine, AAK has unique skills in turning and milling compound machine tools. AAK hydraulic relief valve, valve element with inclined hole and included angle can also be produced. You can also have a small try! https://www.aakindustry.com/info-detai , l/hydraulic-relief-valve-aak243

Alexandro is from a logistics equipment company in Brazil. At the end of last year, they developed an airport logistics equipment, which will be promoted at this year's exhibition. Unstable pressure supply and slow response occurred in the commissioning stage, because the inlet and outlet oil flow of hydraulic manifold is unstable. Test each hydraulic valve in the hydraulic manifold separately, and there is no abnormality. Their technical team did not have a solution, but only asked Alexandro to re purchase hydraulic manifold. Alexandro knew that blindly re purchasing hydraulic manifold was tantamount to changing the form but not the content. After consulting the manufacturers of the original hydraulic valves and hydraulic valve blocks, they all said that they are unable to analyze the whole hydraulic manifold, but they can ensure that their products have no problems. Alexandro is also consulting other hydraulic manifold manufacturers. A week has passed and no reply has been received. The boss also blamed Alexandro for the poor hydraulic manifold in purchasing, and Alexandro was unable to say the suffering. Alexandro accidentally browsed AAK in Google and left a message: why is the pressure supply of hydraulic manifold unstable? Such questions are not specific and difficult to answer. It is just like the question, what is the cause of a child's fever? A blood test is needed to determine whether it is a virus or a bacterial infection. According to the hydraulic manifold drawings and video of commissioning provided by Alexandro. AAK engineers judge that the problems lie in the design of hydraulic manifold and the selection of hydraulic valves. I replied to Alexandro that AAK can redesign the hydraulic manifold, but it takes 40 days and 6,000 US dollars of development cost. If it fails, the fee can be refunded. The promotion time is coming, the boss is pressing, but he still can not find a new factory. Maybe Alexandro has to only believe in the hydraulic manifold of AAK. After 40 days, AAK sent the hydraulic manifolds. 1 month later, Alexandro informed that the hydraulic manifold newly designed by AAK had been used for 3 weeks, and the equipment was normal. Hydraulic manifold design runs through the whole process of design, manufacturing, use and maintenance, especially affected by manufacturing, that is to say, a good hydraulic manifold design cannot be separated from manufacturing. AAK often receives some hydraulic manifold drawings that cannot be processed directly according to the drawings. A good hydraulic manifold designer must be able to analyze the whole manufacturing process. AAK hydraulic manifold engineers consider not only manufacturing, but also the use, because the design is for "use”, such as hydraulic manifold efficiency, energy consumption, stability, service life, and maintenance methods. Innovation is also needed in hydraulic manifold design. AAK hydraulic manifold innovation means that each hydraulic valve is re combined into a new hydraulic manifold, or some new elements are added to the old hydraulic manifold. New things are generated in affirmation and negation, and negation and affirmation. Innovation is just like seasoning. With such a little seasoning, the dish tastes more delicious. AAK hydraulic manifold runs through the whole process of design, manufacturing, use and maintenance. You can also have a try! https://www.aakindustry.com/info-detai , l/hydraulic-manifold-aak242

Today, Eichendorff from Germany placed a re-order for 500 hydraulic pilot operated pressure control valves and told us that his boss was very satisfied with the quality of AAK. It has been more than 1 year since the last purchase of hydraulic pressure control valves, and no customer complained about unstable pressure supply. At the beginning of last year, one of their hydraulic power units was complained by customers that the pressure supply was often unstable after using a period of time. They judged that there was a problem with the hydraulic pilot operated pressure control valve. After the valve was replaced, the pressure supply of the equipment was normal. Eichendorff sent the replaced valve back to the original hydraulic pressure control valve manufacturer. After inspection, the manufacturer found that the parameters and functions were produced according to the requirements of Eichendorff's company. He thought that they had moved the pressure regulating screw of the hydraulic pressure control valve during installation. After measurement, Eichendorff's engineers found that all parameters of the original hydraulic pressure control valve could be benchmarked, but they did not change the pressure regulating screw during installation. Eichendorff contacted several local German hydraulic pressure control valve manufacturers, and most of them were unwilling to analyze. After browsing AAK website on Google, Eichendorff sent an email and asked: what is the reason for the unstable pressure supply of the hydraulic pressure control valve after using a period of time? AAK HYDRAULIC VALVE often receives similar questions, and we are happy to solve these problems, because this is the best source for accurate customers. Eichendorff sent us the samples, drawings and hydraulic system schematic diagram of the hydraulic pilot operated pressure control valve the next day. 1 week later, AAK engineers disassembled the hydraulic pressure control valve and found 2 possibilities in combination with various technical parameters. First, the design of the damping hole of the hydraulic pilot operated pressure control valve should be improved. The ratio of the opening pressure to the set pressure is a little high, which will cause too large pressure regulation deviation, thus affecting the stability of the valve. Second, the type selection of the spring of the hydraulic pilot operated pressure control valve is not suitable, and a spring with better elasticity is required. After receiving our diagnosis, Eichendorff hoped that AAK could test the samples according to our ideas and was willing to pay the development cost. AAK technical team spent 24 days and tried samples for 6 times, and found the most suitable pressure ratio, adjusted the original design of the damping hole, selected 3 springs with good elasticity to compare, and determined the special SiCr alloy steel spring as the spring of the hydraulic pilot operated pressure control valve. After 30 days, 30 samples were sent. 3 months later, Eichendorff informed by email that when AAK hydraulic pilot operated pressure control valve was used, no customer complained about unstable pressure supply. I replied that according to previous customer feedback, there will be no customer complaint about unstable supply within 1 year. Eichendorff probably didn't believe it until 1 year later, today, the reorder of the hydraulic pressure control valve came. Eichendorff admired AAK service and professionalism from the bottom of his heart. AAK hydraulic pressure control valve is not only professional, but also good at what peers are unwilling to do. Welcome to have a try! https://www.aakindustry.com/info-detai , l/hydraulic-pressure-control-valves- aak257

This Monday, we launched a new model E-CXBA free flow nose to side check valve, which is equivalent to SUN's standard parts CXBA. This Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction. Many hydraulic manifolds use this hydraulic check valve, and most hydraulic manifold manufacturers do not have the production procedure of this hydraulic check valve. They need to purchase this hydraulic check valve from other hydraulic cartridge valve manufacturers. AAK has provided this hydraulic check valve to 5 customers for use in their manifolds, or directly supplied the complete hydraulic manifolds with this check valve. This hydraulic check valve is not only widely used, but also has many functional requirements. The key lies in its performance. Although some cartridge valve manufacturers can produce this hydraulic check valve, and perhaps its functions can be compared to SUN's CXBA standard parts, how is the performance of their hydraulic check valve? AAK E-CXBA Hydraulic Check Valve 2 Key Selling Points: 1. The lifespan is twice that of most peers 2. Low leakage, internal leakage of 1 drop/min, benchmarking SUN for both functionality and performance. Technical parameters of AAK E-CXBA Hydraulic Check Valve: Maximum Operating Pressure: 350 bar (5000 psi) Capacity: 10 gpm (40L/min) Internal Leakage: 1 drops/min. Cavity: T-162A AAK has supplied this hydraulic check valve to 5 customers for their hydraulic manifolds, and you can also give it a try. AAK HYDRAULIC CARTRIDGE VALVES (557) 2023-04-10 https://www.aakindustry.com/info , -detail/check-valves-aak557

Consuelo comes from Spain and started purchasing hydraulic cartridge valves from manufacturers in China 2 years ago. He has been successful but was wrestled by a hydraulic cartridge relief valve equivalent to HydraForce RV10- 22. The cartridge relief valve thread slipping caused by carelessness in the original hydraulic cartridge valve manufacturer was solved by AAK with 1 small detail. In March of this year, they needed to purchase 100 pcs of hydraulic cartridge relief valves RV10-22. This is a standard part, and Consuelo purchased RV10-22 in bulk directly. 3 months later, some users complained that the threads of the hydraulic cartridge relief valve cage were slipping and leaking. Consuelo was surprised because this is the first time for him to encounter this low-level error of thread slipping. Although the original manufacturer of the hydraulic cartridge relief valve was very cooperative, Consuelo realized that the hydraulic cartridge valve manufacturer with unstable quality would bring him a lot of trouble in his future work. Each hydraulic cartridge relief valve cage thread must be 100% compliant without slipping threads. Consuelo found AAK on Google and left a message: Has AAK encountered any problem with the thread slipping of the hydraulic cartridge relief valve cage? I told him that more than one client has raised the issue of thread slipping, and AAK has avoided thread slipping with just a small detail in the process. After communication, it was learned that he purchased hydraulic cartridge relief valve RV10-22 from the original manufacturer and encountered the problem of thread slipping. I told him that AAK has existing stock for the hydraulic cartridge relief valve RV10-22. He can receive them after 1 week and customer complaints can be resolved. The hydraulic cartridge relief valve thread has no slipping, which is not difficult, but the key lies in the details. Of course, the material selection and processing of hydraulic cartridge relief valves are the foundation. AAK controls the accuracy of the valve cage external thread and internal hole inspection in this way. Before assembly, AAK inspection technicians use thread ring gauges and plug gauges to check. Inspect the thread size on the outer surface of each hydraulic cartridge relief valve cage using a thread gauge. The inner diameter of the hydraulic cartridge relief valve cage is tested with a plug gauge, and each thread is tested. This is a small detail, but most hydraulic cartridge valve manufacturers in China overlook this process directly. The original manufacturer was unable to avoid the thread slipping of hydraulic cartridge relief valve RV10-22, and AAK solved it with one 1 small detail. AAK hydraulic cartridge relief valve, the thread without slipping, you can rest assured to give it a try! AAK HYDRAULIC CARTRIDGE VALVES (651) 2023-08-17 https://www.aakindustry.com/info , -detail/relief-valves-aak651

This week, we’d like to introduce a hydraulic pilot-operated check valve equivalent to HydraForce PC10-30. It is a screw-in, cartridge style, pilot operated, hydraulic check valve. This March, we received an inquiry from a Russian customer for HydraForce PC10-30 hydraulic pilot-operated check valve. Per customer, they purchased from HydraForce previously. Due to political issue, HydraForce stopped the cooperation with them, so they needed to find a reliable hydraulic cartridge valve manufacturer in China. The annual demand for this valve is 5,000 pcs. AAK has been the supplier of HydraForce for 9 consecutive years, and we have this valve in stock under model# E-PC10-30. AAK shipped 10 pcs of testing samples to this customer immediately. Last week, we were advised by customer that AAK samples have been tested for over 10 months and approved by their technical dept. They will issue the annual PO for 5,000 pcs within this week. AAK hydraulic pilot-operated check valve E-PC10-30 two advantages: 1. Quality equivalent to HydraForce PC10-30 2. Its service life is 2 times that of its domestic peers Technical parameters of AAK E-PC10-30 pilot-operated check valve: Max. Operating Pressure: 240 bar (3500 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 3 drops/min max. at 240 bar (3500 psi) Cavity: VC10-3 AAK E-PC10-30 hydraulic pilot-operated check valve, benchmarking HydraForce PC10-30, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (769) 2024-01-29 https://www.aakindustry.com/info , -detail/check-valves-aak769

Product Description: Drip Irrigation Tape - Product Overview The Drip Irrigation Tape is a revolutionary product designed to provide efficient and effective irrigation for various crops. With its long service life, uniform drip situation, wear and corrosion resistance, high clogging resistance, and customizable laying length, this product is the perfect solution for all your irrigation needs. Service Life: Long The Drip Irrigation Tape is made with high-quality materials that ensure its durability and long service life. This means that you can rely on this product for years to come, providing you with consistent and reliable irrigation for your crops. Drip Situation: Uniform One of the key features of the Drip Irrigation Tape is its ability to maintain a uniform drip situation. This ensures that every plant in your field receives the same amount of water, resulting in healthier and more consistent crop growth. Characteristic: Wear Resistant And Corrosion Resistant The Drip Irrigation Tape is designed to withstand harsh weather conditions and resist wear and tear. It is also corrosion-resistant, making it suitable for use in all types of soil. This ensures that the product maintains its effectiveness and durability over time. Clogging Resistance: High The Drip Irrigation Tape is designed with a high clogging resistance, meaning that it can effectively prevent clogging caused by dirt, debris, and other particles. This ensures that the water flow remains consistent, providing your crops with the right amount of water without any interruptions. Laying Length: 45m-238m The Drip Irrigation Tape is available in a range of customizable laying lengths, ranging from 45m to 238m. This allows you to choose the best length for your specific field and irrigation needs, making it a versatile and convenient solution for all types of crops and fields. Key Words: Lnlaid Patch Drip lrrigation Belt Patch Type Drip Irrigation Belt Lnlaid Patch Drip lrrigation Belt The Drip Irrigation Tape is also known as the Lnlaid Patch Drip lrrigation Belt or Patch Type Drip Irrigation Belt. These terms refer to the unique design of the product, with a patch type layout that allows for efficient and uniform water distribution.

Albion is from Turkey, and has cooperated with AAK on hydraulic manifold blocks for 2 years. In the second half of last year, they received a sample order for hydraulic manifold blocks, and the customer requested to deliver the samples within 60 days. For hydraulic valve standard parts, this time frame is OK. However, for the customized hydraulic manifold block, it is some difficult to finish in 45-50 days. Albion contacted a local hydraulic manifold block manufacturer, but after receiving the drawings, the manufacturer said it was too late. Because this hydraulic manifold block has a high degree of integration, many types of cavity holes, multiple machine tool positioning, complex processing, and the need for customized molding tools, it needs at least 60 days. Albion has contacted more than 10 hydraulic manifold block manufacturers, none of them can catch the schedule. Albion was worried. Albion contacted me and asked about the sample lead time. Can AAK complete the hydraulic manifold block sample within 45-50 days? According to the analysis of AAK engineers, the processing of this hydraulic manifold block is really difficult. According to the conventional processing technology, it will take at least 60 days. AAK has a unique processing technology to sample this hydraulic manifold block, and can complete it in 45 days. Albion was very happy to learn it. AAK sent 3 samples of hydraulic manifold blocks 45 days later. 3 weeks later, Albion informed that AAK sample of hydraulic manifold block was sent to the customer. Thanks to AAK for completing the hydraulic manifold blocks in 45 days, but it seems that it is not the traditional processing method. For the sample of this hydraulic manifold block, AAK does not need a forming knife, and uses a simple and time-saving method to sample. 1. In the hydraulic manifold block, first drill and tap the installation hole and oil passage hole concentrically. There are grooves in the installation hole. There are eccentric positioning pin holes at the bottom of the installation hole. During installation, the fixed groove is sleeved into the opening ring and pressed to the same outer diameter as the valve hole to ensure the size and accuracy of the cavity hole. 2. The layout of the oil passage groove is based on the method of electronic printed circuit and plane machining, and the cover plate is welded by brazing. This method is more convenient and time shorter than conventional drilling. 3. The installation hole of the hydraulic manifold block is drilled, expanded, milled, bored and processed. The oil ports in the valve hole are distributed axially through the oil guide groove, leading to the connection position of the oil passage groove on the oil passage plate. In this emergency processing method, to sample the hydraulic manifold block is a surprise. There is no need for customized tools, which saves time, simplifies processing, and does not affect the hydraulic manifold block to support the hydraulic manifolds. AAK hydraulic manifold block, the sample lead time is only 70% of that of peers, you can also have a small test. https://www.aakindustry.com/info-deta , il/hydraulic-manifold-blocks-aak477

Primo is from a hydraulic equipment company in Brazil. He has been smooth in this industry for 5 years, but encountered trouble in a hydraulic cartridge directional control valve. At the beginning of this year, their company sold a batch of hydraulic supports. After 6 months, the customer reported that the pipeline interface was suddenly broken. The after-sales server thought it would be OK to replace the pipes, but a week later, an accident was almost caused and the customer was angry. The original source is the hydraulic cartridge directional control valve. When the control valve is opened in reverse direction, the system oil overflows rapidly with a large amount, and the impact pressure causes the fracture of the pipeline interface. The manufacturer of the hydraulic cartridge directional control valves fed back that the high pressure and large flow under operating conditions caused abnormal control, which had nothing to do with the manufacturing quality of the valves, the only solution is to replace with new ones. Primo had no choice but to change the manufacturer of the hydraulic cartridge directional control valves. A week has passed but the after-sales plan has not been implemented yet. The boss was unhappy and Primo was worried. Primo found AAK on Google. After browsing AAK website, he left a message: How to ensure the stability of the hydraulic cartridge directional control valves with high pressure resistance and large flow? After communication, I learned that the original hydraulic cartridge valve manufacturer had no solution. I told him that AAK hydraulic cartridge directional control valve should first ensure its reliability, not replace the pipeline interface today, but replace the seal ring tomorrow, and then ensure its stability, it cannot be the case that sometimes it is abnormal, sometimes it is normal. Perhaps Primo felt that AAK was different from the other China hydraulic cartridge valve manufacturers he contacted, and asked if we could make samples according to the hydraulic cartridge directional control valve drawing and system schematic diagram provided by him. AAK engineer thought that the design of the hydraulic cartridge directional control valve should be optimized first. Primo’s engineer said that AAK can play its own role as long as the appearance and size remain unchanged and the functions are satisfied. After 50 days, AAK sent 12 samples of hydraulic cartridge directional control valves. 2 weeks later, Primo emailed that the hydraulic support could operate normally after installing AAK hydraulic cartridge directional control valves. Next, he just needed to wait for his customer to assess the stability of the hydraulic supports. I told him that he does not need to worry about the stability of AAK hydraulic cartridge directional control valves, even under high pressure and large flow, there would be no problem in 1 year. Last week, Primo sent the order for 360 hydraulic cartridge directional control valves, reminding me that this was the request of his boss. In order to avoid accidents, the boss decided to replace all the hydraulic supports with AAK Hydraulic cartridge directional control valves, because the customer was very satisfied with this after-sales plan, the hydraulic support has been used for 9 months without any abnormality. AAK hydraulic cartridge directional control valve, is resistant to high pressure and has large flow, focuses on stability and reliability, and is optimized from the following 3 points. It has impressed Primo who has been in purchasing for 5 years, and also impressed his engineers and boss, making customers more satisfied. 1. Optimize the opening of hydraulic cartridge directional control valve spool. The bigger the opening, the weaker the impact of system oil shock and fluid energy. But this opening must be moderate. If it is too large, it will backfire. Here's the trick. 2. Using the dynamic characteristic curve, the best matching between the oil pressure and the half cone angle of the small valve spool is refined. The suitable half cone angle of the small valve spool can effectively reduce the pressure impact and increase the stability during the opening process. 3. At the outer side of the large diameter end of the valve spool and at the beginning of the threaded connection on the inner wall of the valve body, a stop ring is set, which is also conducive to the stability of the hydraulic cartridge directional control valve. AAK hydraulic directional control valve, under high pressure and large flow, has twice the stability of its peers. You can also have a small try! https://www.aakindustry.com/info-detai , l/hydraulic-cartridge-directional- control-valv , es-aak407

Generally, "big factories", such as Alibaba and Google, have a special department called Research Institute. AAK hydraulic valve also has a similar department, but it is called bench department. This department has no short- term KPI and no KPI catch-up. Like an engineer's paradise, AAK hydraulic valve engineers dare to keep trying and optimizing with such an environment. In AAK hydraulic valve, the sales department makes today's money, the production department makes tomorrow's money, and the bench department makes the day after tomorrow's money. Conversely, the bench department is wasting today's money, spending tomorrow's money to do development for the sake of AAK hydraulic valve strategy and the future of AAK hydraulic valve, although the future is not clear, in my mind, they are the "special team" of AAK hydraulic valve. Making high-quality hydraulic valves can only be driven by technology. A combat team composed of several people can anchor and conquer a technical direction. The subdivided STG (Special Technology Group) focuses on innovative solutions for hydraulic valves. There has never been a shortcut or a fast track for the scientific research of hydraulic valves. Only when we settle down to do things, can we make every step steady. The reason why science and technology in this world can be developed is precisely because of the engineers' persistence, which is a long-termism and a bench spirit. AAK hydraulic valve is used in aircraft. It sounds very powerful. But it's really hard to do. Sometimes you can't see the way. Sometimes, there are many roads in front of you. Fortunately, AAK hydraulic valve chose the right path. Even if the road is tortuous, even if the road is very hard. But the right way is never far away. The bench Department of AAK hydraulic valve has to make a hard hit on this road every day. Diligence is a way to explore talents and a necessary condition for success. AAK engineers have experienced for many years. It is not difficult to combine, mutate and graft some hydraulic valve structures to create some new hydraulic valves. Instead of making some so-called patents that can't create any value for no reason, it's better to use your limited life to do something that can leave a mark on this beautiful planet. At that time, when I am old to die, on my deathbed, I will think that I have lived for so many years and made so many devices to run on the earth, which is enough to make me smile in the underworld. Bless the engineers of AAK hydraulic valve. May you have the bench spirit to conquer one mountain after another. I also wish AAK hydraulic valve a happy journey. AAK hydraulic valves, the right way, never afraid of far. https://www.aakindustry.com/info-detai , l/hydraulic-valve-aak241

China's domestic large aircraft C919 is put into market at unit price of 99 million US dollars. Most of the performance indicators of C919 are the same as those of Airbus A320 and Boeing 737. In the future of China's manufacturing industry, labor-intensive factories will be eliminated. Instead, they will focus on manufacturers with certain technical content to benchmark or gradually surpass international first-line brands. This is also the trend for Chinese hydraulic valve manufacturers. China has numerous small factories with its own proprietary technology, such as Chinese hydraulic valve manufacturers with its own unique technology. India, Vietnam and other Southeast Asian countries are unlikely to replace Chinese hydraulic valve manufacturers within 30 years. Therefore, I am optimistic about the future of Chinese hydraulic valve manufacturers, especially those with their own proprietary technology. The more high-tech, the easier it is to be eliminated. Because there is Moore's Law in the high-tech field, it will be upgraded in 18 months. However, Chinese hydraulic valve manufacturers with their own proprietary technology do not have the curse of Moore's Law, so their vitality is extremely strong and can not be easily surpassed. For example, Chinese hydraulic valve manufacturers such as AAK, it is difficult for their peers to copy and imitate, and even some international first-line brands cannot do so. AAK hydraulic valves have surpassed most Chinese hydraulic valve manufacturers in terms of function, performance or quality. 1. AAK hydraulic valve pays attention to R & D and spends money on equipment, have high precision machine tools imported from Switzerland, Mikron GF high precision CNC machining center, GILDEMEISTER turning and milling compound machining center, and various independent fixtures upgraded and refitted by ourselves. 2. AAK technical team has engineers from the global top 10 of hydraulic valve industry, who have their own experience in material selection, production drawing design and production line quality control. 3. AAK has been ODM factory of 3 Fortune Global 500 companies for 10 years, and its quality control process is strict, which is more strict than the ISO certification system. As well as never relaxing the requirements for ourselves, we are constantly improving our technology by sticking to the details. Don't say what Chinese hydraulic valve manufacturers don't have, or how impossible, people can't think about things they don't know. These are the wisdom of laymen's ignorance, and the more ignorant, the wiser. AAK Hydraulic valves: 1. The core technology, especially the production of core components, the assembly and final commissioning of hydraulic valves, is in our own hands. We never make small moves under the table. 2. The network marketing, grasps in own hand, every day outputs the difficult and miscellaneous problems of the hydraulic valves, solves the problem for the customers. 3. Free choice, positioning the quality of hydraulic valves, and positioning the customers of hydraulic valves at the same time, free choice of customers to cooperate with. AAK hydraulic valve only aims to be the leader of Chinese hydraulic valve manufacturers, and benchmarking the international first-line brands. https://www.aakindustry.com/info-de , tail/hydraulic-valve-manufacturer-aak240

Leo is a purchaser of a hydraulic equipment company in the United States. He has been purchasing hydraulic cartridge valves from China for 2 years and has been very smooth. However, in recent 2 weeks, he had a big headache due to the cage accuracy of a hydraulic directional control valve purchased from a hydraulic cartridge valve manufacturer in China. Some of the valve cages did not meet the roughness and roundness accuracy standards, which angered his engineer. The engineer requires that the Ra value of each hydraulic directional control valve cage be below 0.8 and the roundness tolerance be within 1μm. Leo found hydraulic cartridge valve manufacturer AAK on Google and sent an email asking if it is possible for AAK to ensure that the valve cage of each hydraulic directional control valve is Ra0.8 or less, and the roundness tolerance is within 1μm? After communication, it was learned that he encountered the problem of unstable accuracy at the original hydraulic cartridge valve manufacturer. According to the information provided by Leo, this is a valve equivalent to SUN Hydraulics' standard part, but the requirements for this valve cage are higher than that of SUN, in order to compatible with their hydraulic equipment requirements. Most hydraulic cartridge valve manufacturers believe that accuracy comes from production, not from inspection, so many of them overlook subsequent inspections. Hydraulic cartridge valve manufacturer AAK focuses on both. We sent Leo a video on how AAK produces and inspects the valve cage of the hydraulic directional control valve. After several rounds of communication, Leo requested AAK to send samples. Yesterday, AAK sent out 6 samples of hydraulic directional control valves for the test order. From the video, it can be seen that the equipment for producing hydraulic directional control valve cage is TSUGAMI fully automatic lathe from Japan, with the advantage of stable machining accuracy and advanced measurement and control systems. This is AAK's first-hand grasp, and the selection of production equipment is the foundation. How to inspect the valve cage of the hydraulic directional control valve is AAK's second-hand grasp. We use a pneumatic measuring instrument to detect the roughness and roundness of the inner hole, and each hydraulic directional control valve cage is inspected. AAK hydraulic directional control valve, the quality is controlled with both hands; you can also give it a try! AAK HYDRAULIC CARTRIDGE VALVES (766) 2024-01-25 https://www.aakindustry.com/info , -detail/directional-control-valves-aak766