Other Tools, Tool Sets & Parts

TiCN cermet has a very high chemical stability, cutting process, the friction coefficient is small, low cutting temperature,Can prevent the process of cutting the interatomic diffusion of materials, antistick knife and wear resistance is also much higher than the hard alloy.But also has better red hardness and anticrescent crater wear performance,suitable for steel high speed processing and semi-finishing.

PRODUCT DESCRIPTION Wholesales Down The Hole Low/High Air/Pressure 3" 4" 5" 6" 8" 10" DTH bit /DTH hammer Construction machinery parts 3" 4" 5" 6" 8" 10" DHD/Ql/Cop/Misson/SD DTH Hammer and DTH steel Bits for Mining/Water well Drilling Our tools are widely used in different drilling applications including mining,quarrying, water well drilling, geotechnical industries and etc. In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH Hammer Types coverage: DHD/COP/HD/IR/TD/COPROD/QL/SD/Mission/Numa/Mach etc. Roschen DTH Hammer Technical Parameters Hammer Size(inch) Bit Shank Connection Thread Suitable bit Working pressure Air consumption 1-3" BR1 RD40 box ¢64-¢76mm 0.7-1.75Mpa 0.7Mpa 4.5m3/min 1.0Mpa 4m3/min BR2 RD50 box ¢70-¢90mm 0.7-1.75Mpa 1.4Mpa 5m3/min BR3 API 2 3/8" Reg ¢90-¢110mm 0.7-1.75Mpa 3" DHD3.5 API 2 3/8"Reg ¢90-¢110mm 1.0-1.5Mpa 1.0Mpa 4.5m3/min 1.5Mpa 9m3/min COP32/COP34 M30 4" DHD340 API 2 3/8"Reg ¢105-¢130mm 1.0-2.5Mpa 1.0Mpa 6m3/min 1.8Mpa 10m3/min 2.4Mpa 15m3/min COP44 QL40 SD4 M40 6" DHD350 API 4 1/2"Reg ¢200-¢279mm 1.0-2.5Mpa 1.0Mpa 15m3/min 1.8Mpa 26m3/min 2.4Mpa 34m3/min COP54 QL50 SD5 M50 8" DHD380 API 4 1/2"Reg ¢200-¢279mm 1.0-2.5Mpa 1.0Mpa 15m3/min 1.8Mpa 26m3/min 2.4Mpa 34m3/min COP84 QL80 SD8 10" SD10 API 6 5/8"Reg ¢254-¢330mm 1.0-2.5Mpa 1.0Mpa 22m3/min 1.8Mpa 40m3/min 2.4Mpa 55m3/min NUMA100 12" DHD1120 API 6 5/8"Reg ¢305-¢381mm 1.0-2.5Mpa 1.0Mpa 30m3/min 1.8Mpa 56m3/min 2.4Mpa 78m3/min SD12 NUMA120 NUMA125 15" ROS 150 API 6 5/8"Reg ¢530mm-¢660mm 1.0-2.5Mpa 1.0-2.5Mpa 24" ROS 240 API 6 5/8"Reg ¢775mm 1.0-2.5Mpa 1.0-2.5Mpa Notes: Any Spline is available API Thread, Metzke, Remet thread is available! Any special size of DTH bits will be available by requests. DTH Bit Size range: 2"-32"(76-775mm) 1. High air pressure DTH hammer size from 3" to 12"(76mm-304mm) 2. Shank types including COP, QL,DHD, MISSION,HD,IR, SD,TD, etc. 3. Connect Thread : API 2 3/8" , API 3 1/2 , Reg-6 5/8"Reg etc. 4. Low air pressure DTH hammer includes CR series: CR90, CR110, CR150, etc. 5. Middle air pressure DTH hammer includes CBR series: CBR1, CBR2, CBR3, etc. Why choose King Kong down the hole DTH hammer drilling tools ? King Kong drilling tools are with more high cost effective! High grade tungsten carbide inserts Bit bodies manufactured from high grade steel and processed using state-of-the- art CNC machinery and heat treatment Our hammer and drills : For Quartz sandstone, it can drill 70 to 80m deep; For Iron ore, copper ore, metal ore, basalt, etc, it can drill 700 to 800 m deep; For limestone, it can drill 2000 to 3000 meters deep; For coal mine, it can drill over 4000 meters . Depending on the geology, we can improve the performance by about 30% Roschen DTH Hammer, Bits can compete Sandvik, our products are more high cost effective; Comparing with the second best Atlas Copco in the world, ours is absolutely superior to theirs. Product Overview DHD 350 Down The Hole Drilling Tools for Mining and Water Well Drilling 0 The characteristics of High Air pressure DTH Hammer with foot valve Valve air distribution, more reliable. Simple design of the poston, long life. More Efficient energy transfer, faster drilling speed, lower air consumption and low oil consumption. Fewer internal parts, simple structure, longer life, less failure and easier to maintain because all the parts are heat treated. Easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi-step thread. The characteristics of High Air pressure DTH Hammer without foot valve Out of the trouble of foot valve fracture and expansion and contraction. Lower energy consumption and higer impact frequency. The drilling speed is 15% to 30% higher than the one with foot valve. Simple structure, reliable parts, long life, easy and cheap maintenance. Lower air and oil consumption. The oil consumption is about 10% lower than the one with foot valve.

TGF32 GBA32 CNC Lathe Vertical-Installed Precision Turning And Grooving Inserts Application Field: Carbide Turning Inserts are mainly used for turning & grooving operations on lathe & CNC machines which are available in different shapes & cutting angles.TGF32, or called GBA32 series, are CNC carbide turning inserts. These insert is recommended for general-purpose turning machining of steels. Inserts Production Standard: The insert size details can be processed separately according to customer requirements, and refer to the standard: Kyocera TGF32 series, NTK's GTM32, GTMX32, GTMH32 series, etc. TGF32: Kyocera TGF32 series, a popular series of carbide inserts.”R050 005” represents the specification and cutting orientation of insert.Our Drow standard production size and standing stock specifications mainly refer to this series. GTMH(X)32: A popular series of carbide insert, named by NTK.Similar specification as TGF32. Specific information refer to below “Product Specification”. GBA32: A popular series of carbide insert,Named by ZJ tools. Product Details--- TGF32/GBA32 Excellent material: 100% original carbide powder.Lead our insert to excellent wear resistance and toughness. Dimensions: ①CW:0.33~2.50mm. ②CDX: 0.8~2.50mm. ③RE: 0.05~0.10mm. Advanced coating: To be defined per your application.Whatever,Our insert surface adopts advanced coating technology , leading it to well corrosion resistance and wear resistance. Fine grinding process: The surface of the insert has high smoothness, good cutting edge quality and no cutting resistance.Effectively reduce the friction and reduce the loss. Perfect fit: Accurate and smooth insert edge strips.It is not easy to produce micro-vibration during processing on the holder. Applicable materials: Uncoated inserts for aluminum,non-ferrous metals,non- metallic.Coated inserts for carbon steel,alloy steel,mold steel,other harden steel,ductile iron etc. Customization: If standard stock cannot meet your demands, please attach CAD drawings/3D drawings for your inquiry, thank you. Mature insert production: All the inserts of production, coatings are used in high-end EU processing equipment. To know more, please refer to below “Entire Production Quick View”.

Product Description Limited Warranty The NorthStar Advantage Durability and Protection NorthStar pressure washers are built to last using the highest quality components and materials. To give you extra peace of mind, we stand behind our product with a 2-year limited warranty. Guaranteed Satisfaction Shop in complete confidence, knowing Northern Tool + Equipment protects your investment and is ready to provide you with the assistance and helpful resources you need. Superior Service and Support Should you ever need service or support, help is a phone call or e-mail away. NorthStar's field-trained technical staff is ready to help. For convenience, our professional in-store service department performs all repairs on site. Replacement parts are stocked at our Northern Tool + Equipment warehouse and ready to ship the same day your order is received. Features + Benefits Features for NorthStar Electric Wet Steam & Hot Water Pressure Washer — 1700 PSI, 1.5 GPM, 115 Volt Contact with water or oil will not damage insulation; upon drying the insulation regains its original shape Uses 1/2in. Schedule 80 extra-heavy pipe Forged brass manifold gives improved strength over cheaper aluminum Easy Start stops pressure build-up during start-up Adjustable pressure for job versatility Sight glass lets you quickly check pump oil 22mm quick connection makes it easy to use multiple attachments Adjustable thermostat 20 Amp NEMA 5-20R receptacle needs to be a dedicated circuit Key Specs Item# 157305 Brand NorthStar Manufacturer's Warranty 24 months parts / 24 months labor Ship Weight 340.0 lbs Pressure (PSI) 1,700 Flow (GPM) 1.5 Motor Commercial-grade (brand may vary) HP 1.5 Volts 115 Amps 20 Pump Triplex Drive Direct Gun Industrial rear entry w/3 ft. lance Nozzle Type Quick-connect, 0°, 15°, 25°, 40°, steam, soap nozzle Orifice Size 2.0 Hose 50 ft. Gray high-pressure Coupler Size (in.) 3/8 Cart 10-ga. steel frame w/12 in. pneumatic tires Power Cord (ft.) 36 ft. w/GFCI protection Fuel Capacity (gal.) 8 1/4 Fuel Type Diesel, kerosene, #1/#2 fuel oil Max. Inlet Water Temp (°F) 140 Max. Output Water Temp (°F) 250 Steam Capable Yes Burner Type Schedule 80 heating coil Chemical Injector Yes Adjustable Pressure Yes Pump Oil Type Universal tractor transmission oil Pump Oil Included Yes Low Oil Shutdown No Thermal Protector Yes Dimensions L x W x H (in.) 38 x 26 x 43

Minimum Order: 1 bags

Product Description Features + Benefits 12V MAX brushless 1/4in. impact driver has 52% more torque 12V MAX brushless 1/4in. impact driver is 19% shorter Brushless motor for maximum run time and durability 1/4in. quick release drop and load hex that accepts 1in. bit tips 3 mode settings including the Precision Drive™ feature for accuracy 3 LED lights on nose for work surface illumination Lightweight at 1.75 lbs. (tool only) Kit includes two 2.0Ah batteries with state-of-charge indicator, charger and tool bag Key Specs Item# 88882 Brand DEWALT Manufacturer's Warranty 3 year limited warranty Ship Weight 4.55 lbs Volts 12 Battery Type Lithium-ion Batteries (qty.) 2 Battery Amp/Hour 2.0 Charger Included Yes Chuck Size (in.) 1/4 Keyless Chuck Hex Max. Torque (ft.-lbs.) 120.83 Max. Speed (RPM) 2,850 Dimensions L x W x H (in.) 7 1/2 x 5 x 3 1/2 Tool Weight (lbs.) 1.25 Storage Type Storage bag Product Weight (lbs.) 1.25

Minimum Order: 1 bags

Product Description Features + Benefits Commercial and industrial jobsite power Alternative power during severe weather Honda GX390 OHV gas engine with electric start Compressor output: 14.3 CFM @ 90 PSI; 13.7 CFM @ 175 PSI Generator with 5,000 continuous/6,000 surge Watts Two 120V, 20 Amp outlets and one 120V/240V, 30 Amp twistlock outlet Large 30-gallon horizontal air tank Key Specs Item# 49821 Brand Campbell Hausfeld Ship Weight 542.0 lbs Max. PSI 175 CFM at 175 PSI 13.7 CFM at 90 PSI 14.3 Engine Honda GX390 Start Type Electric Engine Displacement (cc) 390 Stage 2 Drive Belt Tank Type Horizontal Air Tank Size (gal.) 30 Pump Cast iron Fuel Capacity (gal.) 1.6 Dimensions L x W x H (in.) 49 x 23 x 42

Minimum Order: 1 bags

Features + Benefits Built-in internal air compressor with air pressure gauge and pressure adjustment control — no additional air compressor required Touch Start System with reliable plasma arc initiation Inverter power technology requires less input power Extra lightweight design with smaller inverter power system Cuts mild steel up to 1/8in. thick clean cut and up to 3/16in. thick sever cut Diagnostic LED lights are built in for one-glance status checks and troubleshooting of power, temperature and torch readiness Thermal overload protection allows the unit to withstand tough work environments and automatically shuts down to help prevent damage if the duty cycle is exceeded or the airflow is blocked Duty cycle: 30% @ 12 Amps Key Specs Item# 64290 Brand Klutch Manufacturer's Warranty 3 year limited warranty Ship Weight 44.4 lbs Volts 120 Compressor Included Yes Pilot Arc Yes Amps 12 Cutting Thickness (in.) 1/8 Sever Thickness (in.) 3/16 Duty Cycle 30% @ 12 Amps Plasma Gas Flow/Pressure Not needed; compressor built in Clamp Cable Length (ft.) 10 Power Cord (ft.) 6.5 Cart No Dimensions L x W x H (in.) 16.75 x 8.2 x 16.1

Minimum Order: 1 bags

Small Portable Electric Cable Winch Puller Machine 1T Application winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools or heavy objects, the electric winch is driven by a belt, effectively prevent the damage of overload, there are pros and cons and the speed of file, anti reverse gear moment to ensure construction safety.Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. Characteristic 1. Small Volume,Compact Structure. 2. Light Weight,Easy to Transport. 3. High Efficiency,Save Labor. 4. Widely Used,pulling,hoisting,lifting and so on. 5. Safe & Reliable 6. Interlock Brakes System. Technical Data Model Engine Gear Pulling Speed (m/min) Rated Pulling Force(Ton) Weight(Kg) JJQ-1< , br> HONDA Petrol engine 4 HP (Slow) 10.0 0.8 36 (Fast) 15.0 0.6 Reverse 12.0 No Lifting! JJD-1 Electric motor 2.2kw (Slow) 10.0 0.8 46 (Fast) 15.0 0.6 Reverse 12.0 No Lifting! JJQ-3 HONDA Petrol engine(6HP)or Homemade Petrol engine (Slow) 5.0 3.0 82 (Fast) 9.0 1.8 Reverse 4.0 No Lifting! JJC-3 Diesel engine(4HP) (Slow) 6.0 3.0 108 (Fast) 11.0 1.8 Reverse 4.5 No Lifting! JJQ-5 YAMAHA Petrol engine (9HP) or HONDA Petrol engine or Homemade Gasoline engine (Slow) 5.0 5.0 145 (Fast) 9.0 2.5 Reverse 3.2 No Lifting! JJC-5 Diesel engine(6.6HP) (Slow) 5.0 5.0 180 (Fast) 9.0 2.5 Reverse 3.2 No Lifting! JJQ-8 HONDA Petrol engine or homemade petrol engine 13HP (Slow) 3.0 8.0 168 (Fast) 5.0 3.0 Reverse 3.0 No Lifting! JJC-8 Diesel engine 10.5HP (Slow) 4.0 8.0 230 (Fast) 7.5 3.0 Reverse 3.7 No Lifting! Kind note Thee winch drum can be designed according to your requirement of the diameter and length of the wire rope, and the detailed technical date will also be change Practical Application Small Portable Electric Cable Winch Puller Machine 1T 0

Product Description Fa Edge Straight Edge High Temperature Sintered Long Life Glass Diamond Grinding Wheels Basic information of product size Diameter Hole Working layer Grit 35-200MM 22-Customized 2-19MM/Customized 60-320# Sintered Glass Grinding Wheel 0Sintered Glass Grinding Wheel 1 Our Production Process Sintered Glass Grinding Wheel 2 Communicate with customers about their needs - Select the right raw materials and match the best formula - Confirm with customers after production - Package and produce customs clearance materials - Arrange for shipment Quick Question And Answer Q: Are you a factory or a trader? A: We are a factory, established in 2006. Located in Jiangmen, Guangdong, China. Q: What kind of trade terms do you support? A: We support the trade term is"EXW, CIF, FOB, DDP". Other terms and conditions can be communicated with the sales manager. Q: Where are your sales regions? A: Logistics, courier can reach the place is our sales target area. Jiangmen Boke industry CO.,Ltd. was established in 2006, located in Jiangmen, Guangdong, China, near the first-tier cities in Guangdong Province (Foshan, Guangzhou, Shenzhen). We are able to independently develop various grinding wheels for glass processing, the main series of products are glass grinding wheels for glass processing machines such as straight edge machines, bevel edge machines, Double edge machines, processing centers, round edge machines, etc. We are able to solve the problems on the use of various machines quickly.

For more than 20 years, Atlas metal has manufactured custom wire forms and coil spring solutions for a variety of industries. Conveniently located near port, we supply quality parts internationally. See the industries that trust us for made-to-order solutions. Specifications of Closed End Springs Product name closed-end springs Color Custom Style Small torsion spring Material Custom Function Furniture Size Customized Features Wire diameter ranged from Φ0.10-Φ14mm, minimum spring convolution Various materials: music wire, galvanised wire, carbon wire, stainless steel wire, copper, beryllium copper wire, and more Various torsion arms Single torsion, double torsion and multi-torsion Torsion in a different direction Applications: all kinds of cars, machines, electronic products, electric appliances, cameras, stationery, computers, power switches, miniature switches, architecture, commodity and home appliances, A/V equipment, hardware and plastic moulds, sports equipment and gifts. Packing Carton Now the price of metal products is affordable, if you have needs, please leave us a message.

Torsion springs are often close wound, so that each coil touches the next. Their ends are configured in different ways. Like extension springs, torsion springs must attach to other parts at both ends in order to work. When forces act on the spring ends, they tighten the coils of the torsion spring. As the custom spring returns to its resting coil diameter, it brings the attached parts with it. Specifications of Clamp Phone Holder Place of Origin China Style Coil Material Stainless Steel Usage Industrial Product name Torsion Spring Color Multicolour Wire diameter 0.2-14mm Surface treatment Customers' Request Shipping Customer's Choices If you are looking for a reliable metal products company, please contact us, and we will be your best partner.

All of our custom metal stamping parts are designed and manufactured according to buyers' specification and performance. And we improve the service life of fasteners through durability testing and key technical design. Also we have wide range of parts selection and Competitive prices with professional factory supply. We can also support customized services according to the samples and drawings provided. Specifications of Brass Stamping Parts Product: brass stamping part Surface Finishing: Brushed, Polished, Zinc plated, Powder coating, Chroming Anodizing or customized Process Technology: Welding, Stamping, Bending, Laser cutting, Drilling Tapping or customized. Professional level: Sticking to the strict technical requirements to ensure the strength and accuracy of the product, professional technique, negotiation, prompt production, guaranteed quality, and fast & convenient shipping logistics. Standard: GB, DIN, ASTM, JIS, BS Tolerance: 0.1mm MOQ: 100 pcs Place of Origin： Hebei, China (Mainland) Quality Level: A Class Payment Term: T/T, PayPal Metal Thickness: 0.1-8mm or customized Delivery: Sample: 15~20 working day Bulk：20-30 working days (according to quantity)s Payment: Payment<=1000USD, 100% in advance Payment>=1000USD, 50% Prepaid + 50% before shipment.. As a metal products manufacturer, we will do our best to meet all the needs of customers.

There are no overall design equations for wire forms, meaning we will work with you to determine the best material, sizing, and manufacturing process to suit your needs. Specifications of Bending Stainless Steel Wire Material : Carbon steel Min. Order : 1000 Piece/Pieces Lead Time : 8-10days Supply Ability : 3000000 Pieces/week Packing: inner packing: as per customer's requirement(PE bag and blister), outer packing: carton or box due to customer's requirement Style : Coil, Disk, Dish, Leaf, Wire, Waved Endurance Limit : 100000 times Usage : Machine Parts/Lighting Accessories/Hardware/Plastic Period Validity : one year We can offer kinds of metal products for sale, if you are interested, please leave us a message.

Copper Bending Spring As a custom electrical conduit bending spring manufacturer, Atlas metal can produce custom springs to meet your specific requirements. Due to the nature of many magazine spring and magazine catch spring applications, orders often utilize a selection of our advanced capabilities, including design assistance, advanced quality controls, assembly and finishing. Specifications of Bending Spring OEM/ODM available Main Products compression spring, tension spring, torsion spring, wire forming, etc. Specification wire diameter from 0.1mm to 40mm Material carbon steel (SWC), stainless steel (SUS), music wire (SWP), alloy steel, SEA9260/9254/6150, SUP9/SUP10/SUP12, 51CrV4, Inconel X750, etc. Surface Treatment zinc plated, electrophoresis, oxidation black, powder coating, blasting, geometry, rust-preventative oil, nickel plated, etc. Packaging inner plastic bag, outer standard carton box.Or at your request. Certificate ISO/TS16949-2002, ISO9001-2000, ISO14000 Lead Time samples:3-7 days; batch goods: 7-15 days after deposit received. Payment Term T/T, L/C, western union, PayPal, etc. Shipment by sea, by air, UPS, TNT, FedEx, express delivery, etc. As a metal products company, we can offer kinds of related products for sale, anything you need, please leave us a message.