Temperature Instruments

“TEMPO” make soxhlet extraction heaters are designed to use in laboratories for solvent extraction under reflux. Typical applications are the determination of residual oil content in oil cake, assay of crude herbal drug sources etc. Max surface temp – 400°C Supply – 230V, AC Construction “TEMPO” make soxhlet extraction heaters is suitable to heat soxhlet flasks of 100-350 ml capacity. The heating element is attached to knitted fabric to provide flexible support to the bottom of the flask. Glass wool insulation fills the gap between the metal casing and the heater. In event of spillage, the solvent will either evaporate or escape through the draining hole below each element. The housing has two retort rods and a cross bar on which the extraction apparatus is fixed. The apparatus has an inbuild energy regulator which controls all the heaters. The heating elements have individual ON/OFF switch and pilot lamp to indicate working. Technical Specification Controlling System Energy regulator and pilot lamp Heating System The heating element is attached to knitted fabric to provide flexible support to the bottom of the flask. Glass wool insulation fills the gap between the metal casing & the heater.

Minimum Order: 1 bags

“TEMPO” make a tray dryer are with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air which ensures a homogeneous hot air mixture and an exact temperature profile. Temperature range – 50°C to 200°C Temperature accuracy – ±0.1°C Supply – 440V, three phase Construction Double walls are constructed on heavy angles. All sides of the ovens are insulated with 7.5 cm thick glass wool insulation to minimize ski temperature. The panels are designed in such a way that the inner and outer wall contact to minimize the heat losses through conduction. Technical Specification Controlling System Microprocessors based autotune PID temperature controller with & dual display of set value & process value for precise control of temperature with PT 100 sensor is used for temperature. Heating System SS tubular heating elements used on the side walls to maintain a uniform temperature condition inside the chamber. Air Circulation The motorized blower fitted on the top side of the chamber develop unique airflow system which ensures maximum temperature distribution inside the temperature. The unique airflow assures that there is a quick recovery after the doors are opened. Features Double walled two doors provided with silicon gasket at front side, heavy duty hinges and ball latch locking system. Safety Features Safety standby thermostat cuts off the heater supply in case of overshoot of temperature. Optional Features CFR 21 part 11 compliance software for data logger Data logger Data scanner complete with sensor Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” make fume hood is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapours or dust. Air is drawn from lab space into the fume hood then dispersed via a pipe to the outside atmosphere. Basically, it protects the user from inhaling toxic gases. Application Chemical lab Food manufacturer Drugs manufacturer company Paint manufacturing company Rubber industry Polymer industry Cement industry Construction Exhaust system Centrifugal blower with anti coregent coating Low noise blower Material of construction Double wall construction Inner body PP and outer body MS powder coated Inner body fibre and outer body MS powder coated Smooth black granite table Features Electrical socket Thich toughen glass window Vertical opening Sash Fluorescent lamp Centrifugal blower with Anti coregent coating Optional Features Tap for gas Tap for water Sink for water Castor wheels Storage cabinet at bottom PVC ducting pipe

Minimum Order: 1 bags

“TEMPO” make laminar airflow cabinets are a series of high efficiency clean room workbenches designed to protect equipment and other contents of the work zone from particulates. In a vertical laminar airflow cabinet, filtered air blows on the work zone and leaves through the holes in the base of three sides SS 304 covered sheet. As compared to horizontal type, vertical flow cabinet can provide greater operator protection. Construction Motor System Backward curved centrifugal fans Low noise Filter System Pre filter efficiency EU-5 rating – Efficiency: 95% down to 5 micron HEPA filter efficiency Eu-13rating (99.997% down to 0.3 microns) Material of Construction Inner SS 304 Table & outer GI powder coated Inner SS 316 table & outer SS 304 Matt finish features Features In build LCD controller with a display of airflow speed and life of UV light and HEPA filter Audiovisual alarm for filter blockage Flange type prefilter of 5-micron capacity Miniplate box type HEPA filter of 99.99% Backward curved centrifugal fans with less noise and vibration High efficiency UV lamp comes with strong germicidal powder and disinfects the area Static pressure is measured by Magnehlic guage In built timer for UV and HEPA filter Optional Features Provision for gas valve Provision for water valve Advantages Inbuilt timer for UV light Specialised sound absorbers material to reduce the noise Facility to reduce the speed to the authorised person Audiovisual alarm for filter blockage Provision of electrical socket Application Plant tissue culture Media plate preparation Electronic inspection Media device assembly Pharmacy drug preparation General lab work Semiconductor industry Aeronautics industry

Minimum Order: 1 bags

TEMPO Magnetic Stirrers with Aluminium top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Different models available for all types of laboratory stirring applications up to 5 liters. Accurate stepless speed control with digital display allows smooth variation up to 1200 rpm. Heat energy is controlled by energy regulator.

Minimum Order: 1 bags

“TEMPO” make hot plates are widely used in various industries such as automobile, chemical, pharmaceuticals and others. Available in various specifications. Max surface temp – 300°C to 350°C Construction make Hot Plates are constructed with thick gauge mild steel well machined & smooth cast iron top. This cast iron is grooved from bottom to circulate spiral heaters. Technical Specification Controlling System Energy regulator/thermostatic controller. Heating System Heating elements are housed into grooves with porcelain beads underneath of the cast iron. Features Grooved cast iron top with the best quality for uniform heating. Suits very high corrosive atmosphere & ensured long-life performance. Safety Features Thermostat to cut off supply in case of temperature overshoot.

Minimum Order: 1 bags

“TEMPO” make hot plates are widely used in various industries such as automobile, chemical, pharmaceuticals and others. Available in various specifications. Max surface temp – 300°C to 350°C Construction make Hot Plates are constructed with thick gauge mild steel well machined & smooth cast iron top. This cast iron is grooved from bottom to circulate spiral heaters. Technical Specification Controlling System Energy regulator/thermostatic controller. Heating System Heating elements are housed into grooves with porcelain beads underneath of the cast iron. Features Grooved cast iron top with the best quality for uniform heating. Suits very high corrosive atmosphere & ensured long-life performance. Safety Features Thermostat to cut off supply in case of temperature overshoot.

Minimum Order: 1 bags

“Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data Temp. Range : 121oC to 125oC Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz

Minimum Order: 1 bags

“Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data Temp. Range : 121oC to 125oC Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz

Minimum Order: 1 bags

“Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data Temp. Range : 121oC to 125oC Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz

Minimum Order: 1 bags

“Tempo” make Laboratory Autoclave are suitable for Pharma & Biotech industries, Food research & Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data : Temp. Range : 121oC to 125oC Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz

Minimum Order: 1 bags

“TEMPO” make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Temperature range – 121°C to 125°C Pressure range – 15 to 22 PSI Factory set – 15 PSI at 121°C Supply – 230V, AC Construction Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded. Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve, steam release valve. Safety high pressure release valve. Foot lifting arrangement is provided in 121C/D/E/F, a basket made of thick stainless steel (S.S.) rod wire mesh. Technical Specification Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater’s safety. Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater’s safety. Optional Features CFR 21 part 11 compliance software for data logger Data logger Data scanner complete with sensor Safety digital temperature controller Timer

Minimum Order: 1 bags

“TEMPO” make MBRT water bath are made of double wall construction. Temperature range – 5°C above ambient to 98°C Features Lower water level cut off system Flat lid Pyramidal lid Test tube rack to hold 30 test tubes Stirring mechanism Construction “TEMPO” made MBRT water bath are made up of the double wall. The interior is made from SS 304 an exterior from MS duly powder coated. The temperature is controlled by means of PID controller cum indicator.

Minimum Order: 1 bags

“TEMPO” low temperature baths are designed for research work at the desired temperature with high accuracy. The temperature is controlled by microprocessor based PID controller with an accuracy of ±1°C. The unit is provided with a circulation pump to ensure uniform temperature. Low temperature bath offers a combination of contemporary design, advance microcontroller and a range of accessories to suit your specific laboratory or process application. High strength cabinet construction with stainless steel interior tanks withstand the most critical applications in demanding laboratory environments. The unit is mounted on castor wheels for ease of mobility. Temperature range – 0°C to -20°C Temperature accuracy – ±1°C Supply – 230V, AC

Minimum Order: 1 bags