Telecommunications & Networks

PSE802BT single port Gigabit Ethernet power supply equipment is suitable for indoor use. It can work normally at 100vac ~ 240VAC input voltage. The power supply is connected with the network terminal equipment through super class 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can provide Poe power supply application conforming to ieee802.3af/at/bt international standard for one-way Ethernet equipment, such as advertising machine, small base station, switch, wireless AP, industrial network terminal, network camera, etc. Meet the requirements of providing efficient engineering solutions in places where power cannot be provided at the remote end or where Ethernet network cable power supply is used to improve system reliability and simplify equipment installation.. PSE802BT Features • 4-Pair power up to 90W • IEEE 802.3bt compliant - higher power • compatible with all IEEE 802.3at, 802.3af and legacy power supply devices • safety: low power devices only receive the required power, and 2 pairs of PDS receive power through 2 pairs • Ethernet power supply is safe and reliable • automatic detection and protection of non-standard Ethernet terminals • support for 10/100/1000baset applications • compact design for easy installation of WLAN access points

Minimum Order: 1 bags

PSE-156G IEEE 802.3at compliant The maximum transmission power is 60W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required An important feature of pse156g is its ability to provide high power on all four pair Poe power supplies and Ethernet cables. Compared with dual core (two pair) products, pse156g can greatly improve performance and efficiency. The four pair Poe power supply enables the pse156g to maintain a low current level of 600mA while providing 60W power. This is in sharp contrast to similar two- wire devices. When providing 60W power, its current level is as high as 1.2A. In view of this, this more efficient pse156g can provide 51w power for PD loss when using CAT5 cable, while it can only provide 30W for two-wire solution. In addition to its 60W operation mode, pse156g can also be used to supply power to two-wire equipment, with a power of up to 30W. In this case, the midspan device still uses all four pairs of CAT5 and above cables, which can reduce the waste of up to 50% of the power on the cable. Compared with the traditional two core solution, the POE system with pse156g can reduce the energy loss by up to 15%.

Minimum Order: 1 bags

PSE801G Non standard Poe design, 48 ~ 56vdc output The maximum transmission power is 30W The maximum power supply distance is 100m Built in power supply, plug and play, no management required Pse801g single port Gigabit Ethernet power supply equipment. The power supply is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can supply power for one-way Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera and other Poe applications, and meet the requirements of providing efficient engineering services in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment

Minimum Order: 1 bags

PSE802G IEEE 802.3at compliant The maximum transmission power is 25.4w Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required Pse802g single port Gigabit Ethernet power supply equipment, The power supply is suitable for indoor use (please put a waterproof box outdoors. It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can be one-way Ethernet equipment, such as router, switch, wireless AP, network telephone and industrial network terminal , network camera, etc. shall be provided in accordance with IEEE802 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

1.CPU: MediaTek MTK6765 Octa (8)-core 2.3GHz; 2.Operation System: android 11.0 with GMS; 3.Display & Touch screen: 8 inch Capacitive 10-point Multi-touch G+F+F,Gorilla Corning Gen. 3th glass, IPS FHD screen 1200*1920 Pixels,450cd/m2 brightness,Sunlight readable; 4.4G Networks: support 2G GSM:B5/B8/B3=850/900/1800MHZ, 3G: WCDMA: B1/B5/B8=2100/850/900MHZ; TD-SCDMA:B34/B39;4G TDD LTE: B38/B39/B40/B41=2600/1900/2300/2500MHZ; FDD LTE: B1/B2/B3/B4/B5/B7/B8/B17 =2100/1900/1800/1700/850/2600/900/700MHZ,can work in North and South America； 5.Two Cameras: Front 5.0MP camera,Rear 13.0MP Camera; 6.Memory & Storage: 6GB ram + 128GB ROM, micro SD card slot support max 512GB; 7.Wireless network: 802.11 a/b/g/n/ac 2.4G+5Ghz dual-band wifi and blutooth V5.0; 8.Navigation and Location: Support GPS / Glonass/ Beidou; 9.Battery: Built-in 3.7V / 10000mAh Lithium Battery; 10.Rugged Durability: Waterproof and dustproof rate: IP68 (Certificated); Ruggedness: comply with MIL-STD-810G,1.2-1.5meter dropproof; 11.Stylus pen: active stylus, support original hand writing,is optional; 12.Work Temperature: -20°C to 60°C (with test report), Storage Temperature: -30°C to 70°C; 13.NFC:ST21 NFC module,13.56MHZ,support ISO14443A/B,ISO15693,mifare. 14.USB RJ45 Lan Ethernet adapter: optional; 15.Dimension:About 243*158*23mm, Net Weight: about 739g.

Minimum Order: 2 barrels

PRODUCT DESCRIPTION High quality cat5e utp BC/CCA lancable product description Name Lan Cable CAT5E UTP Conductor Material CCA Conductor Diameter 0.48 Conductor Insulation HDPE Jacket PVC,LSOH,FR-PVC,LSZH Certificates ISO,UL,ETL,CE,ROHS Length 305M Brand Lansan,OEM,ODM Lead Time Less than 500 boxes----within 10 days 500-2500 boxes----within 15 days 2500-20000 boxes----within 20 days (Lead time is negotiable when customer has special requirements.) product show BC CCA Condoctor Cat5e Lan Cable 0BC CCA Condoctor Cat5e Lan Cable 1 FAQ BC CCA Condoctor Cat5e Lan Cable 2

16 Port Outdoor Fiber Distribution Box Black Outdoor optical distribution Frame Description: Fiber optic terminal box is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected. Features: The box is made of ABS, and lifetime is more than 20 years. It also can be used under -30°c. Bi-layer structure design. The upper layer is for optical splitter, the other layer is for fiber splicing. Easy to operate. Usually installed as wall mounted in the building or at the green belt. It can accommodate 16 pcs SC Simplex or LC Duplex dapters. It can be designed to client requirements. It meets YD/T988-2007 standards. Application: FTTH access network CATV Networks Telecommunication Networks Data communications Networks Operation conditions: Temperatures:-40℃ — 60℃ Humidity:93% at 40℃ Air Pressure:62kPa – 101kPa

12VDC 10G Base-T to 10G Jumbo Frame SFP+ RJ45 to Fiber Ethernet Media Converter Model: LNK-10G-MC Series Overview E-link 10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as 10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in module to the 19" converter rack Chassis for use at a central wiring closet. Features Support Jumbo Frame Transparent Transport and very low delay Support DMI function for SFP+ fiber module Support Loopback test function Support hot plugging Full State Led display Easy installation Provide reliable long-distance connection Fast connection with multi-function Small portable size case Plug and play Application Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to- copper media converter for long distance transmission up to 120km Extend the network distance between two 10 Gigabit Fiber Switches across a fiber link up to 80km in length Convert your 10G SFP+ Direct Attach to multimode or single mode fiber. Technical Indexes Standards 1000Base-T, 2.5GBase-T, 5Gbase-T, 10Gbase-T 1000Base-X, 2500Base-X, 5GBase-R , 10GBase-R Media Supported 1000Base-T: Cat5 UTP/STP. MAX 100m; 2.5GBase-T: Cat5e UTP/STP. MAX 50m; 5GBase-T: Cat5e UTP/STP. MAX 50m; 10G Base-T: Cat6a UTP/STP. MAX 50m; Port Type RJ45, SFP Slot Work Mode 1000Base-T to 1000Base-X 2.5GBase-T to 2500Base-X 5Gbase-T to 5GBase-R 10Gbase-T to 10GBase-R Power Supply 12V DC Power consumption MAX 5W Operation Temperature 0℃ to 55℃ Relative Humidity 5% to 80% (non-condensation) Ordering Information Model Description LNK-MC10G-SFP+ 10G Base-T to 10G Base-R Media Converter, SFP+ Ports, not including SFP+ Modules

1200Mbps Dual Band 4G 5G Routers Gigabit Port 5G Router With SIM Card Slot Product Description Hardware: WS1208 uses the latest MTK wireless solution ,the MT7621A , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1×USB 3.0 port, 1×PCI-E ,1×SIM card , Wireless: Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be 1200Mbps , 4×5Dbi high gain antennas , perform better and cover larger. Software: Preload the OpenWRT. Specification Technical Specification SOC MT7621A+MT7612E+MT7603E 880MHz dual-core MIPS1004Kc CPU RAM 128Mx16bit DDRIII SDRAM,16MB SPI Flash Supports up to 256Mx16bit DDRIII, 32MB SPI Flash Wireless Frequency Band Wi-Fi 1: 11b/g/n : 2.412~2.484 GHz Wi-Fi 2: 11a/n/ac : 5.180~5.825 GHz GPS:1565.42~1585.42 MHz Wireless Specification Maximum access rate of 1167Mbps (2.4G 300Mbps + 5G 867Mbps) PCBA size L200mm x W175mm x H17mm Maximum Power Consumption Max. power consumption 24W Physical Interface WAN x 1+LAN x 4 : RJ45 interface ,10/100/1000 Fast Ethernet Power connector: 5.5mm DC socket, DC12V2A power input USB interface: 1 USB3.0 female socket LTE interface: 1 MiNi PCI-E female connector, connects to USB2.0 interface LTE module, 1 drawer SIM card holder Buttons: 1 button to return to factory settings Power Requirements DC12V2A Wireless Settings Working Mode AP/WDS/Repeater Wireless mode 11b/ 11g /11n /11a /11ac Channel selection (Display the number of channels in different areas by country setting) Channel bandwidth (Auto, 20Mhz, 40Mhz, 80Mhz,) Receiving Sensitivity 802.11b -92dBm @ 1Mbps -83dBm @ 11Mbps 802.11ag -91dBm @ 6Mbps -76dBm @ 54Mbps 802.11n HT20 -91dBm @ MCS0 -70dBm @ MCS7 802.11n HT40 -88dBm @ MCS0 -67dBm @ MCS7 802.11ac HT80 -85dBm @ MCS0 -58dBm @ MCS9 Antenna External detachable 5DBi high gain omni-directional antenna Environmental and Physical Parameters Operating Temperature -20°C ~ 55°C Storage temperature -40°C ~ 70°C Humidity 0%~90% Typical, non-condensing Products Pictures 1200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 01200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 11200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 21200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 31200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 4

Type: Waveguide Circulator Model Number: UIYWC2830A18T265 Place of Origin: Guangdong, China Brand Name: UIY Model: UIYWC2830A18T265 Freq , uency Range: 18~26.5GHz VSWR: 1.25 Insertion Loss: 0.3dB Isolation: 20dB Power: , 100W Connector Type: WR42(BJ220) Temperature: -40 ~ +85°C Warranty: 1 Year

Minimum Order: 1 bags

Vehicle Car GPS Tracker Sos Panic / ACC Door alarm Detect for Truck Tracking System GPS403A/B Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

Original Coban vehicle gps tracker for fleet management free software platform GPS403 4G Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

Automobile GPS Tracker 4G GPS403 with door alarm free APP gps tracking system Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

GPS Tracking system Truck Vehicle Gps Tracker GPS403A with fuel monitor Car GPS Tracker 4G Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100