Telecommunications & Networks - Others

EMV Chip Card Shimmer Device is a device that’s placed inside ATM or POS to intercept communications and record the credit card data between the the chip card and the chip reader from ATM or POS. In that way all the credit card information are intercepted and recorded. You will have fast and easy Track-1, Track-2, and PIN from all the credit card’s that use those ATM or POS. EMV Chip Card Shimmer creates a copy of the original card, including all standard authentication SDA-Static Data Authentication, DDA- Dynamic Data Authentication, the CDA-Combined Data Authentication. You can download the information from the EMV Chip Card Shimmer by connecting your phone/laptop (or any other compatable device) by bluetooth to the Skimmer Device. No internet connection is required. General Information: Device does not need a power supply, since it uses the original smart card readers power from the ATM or POS. Device is extremely thin and fits perfectly into all CHIP card readers shallow entrance. Device can work from -20 to +45 degrees. Device memory can store up to 2000 data records (individual credit-cards) How to Use: Put a little bit of super glue on the 4 Corners of EMV Skimmer Device. Insert the reader EMV Skimmer Device to the CHIP card reader using the supporting card and remove it from the reader. To extract data from the mounted device, connect with your phone, tablet or laptop bluetooth to download the information. Use the included software to convert data from the encrypted data to plain-text format *.txt You are finished! You can find complete instructions and additional tips in the included manual. Now you can do an exact copy of the cloned records. The end result is an exact copy of the original card. To do this, use the provided chip card reader / writer and prepaid ISO 7816 IC chip cards.

Minimum Order: 1 bags

Global Version 3.6Gbps Huawei H122-373 5G CPE Pro 2 Wireless Router Support WiFi 6 Rouers 1. Based on results from HUAWEI lab tests by comparing the download speed of HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. The test is conducted using 200 MHz bandwidth and TDD mode that supports UL/DL ratio of 8:2. 2. Supported 5G frequency bands: n1/n3/n5/n7/n28/n38/n40/n41/n77/n78/n79. Actual supported frequency bands may vary slightly in different regions due to certification. 3. Data from HUAWEI test lab, by comparing HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. 4. Supports 5G Network Slicing based on up to 2 IP addresses. Please be aware that 5G Network Slicing is for testing only. Actual performance may depend on operator policy, network deployment and testing results. 5. Data from HUAWEI test lab, by comparing HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. 6. Data from HUAWEI test lab, by comparing HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. The theoretical value of 5 GHz Wi-Fi is 2402 Mbps, while the theoretical value of 2.4 GHz Wi-Fi is 574 Mbps. 7. HUAWEI Wi-Fi 5-enabled phones includes Mate30 series, P30 series, Mate20 series, etc. All of them support 160 MHz bandwidth. 8. Data from HUAWEI test lab, by comparing HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. 9. Data from HUAWEI test lab. Simultaneously connect up to 16 devices with 5 GHz Wi-Fi. Simultaneously connect up to 4 devices with 2.4 GHz Wi-Fi. 10. 802.11s is currently not supported. HUAWEI 5G CPE Pro 2 would support 802.11s or easy mesh upon HOTA (HUAWEI-Over-the-Air) update. 11. Data from HUAWEI test lab, by comparing HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. 12. Android devices need to use HUAWEI AI Life APP, while iOS devices need to use HUAWEI Smart Home APP. Originating from HUAWEI's self-developed chipset, HUAWEI Wi-Fi 6 Plus is a set of unique features developed based on Wi-Fi 6 standard.

Tactile Keypad IP Jail Vandal Resistant Emergency Outdoor Telephone Product Details This Vandal Resistant Telephone with armored cord is housed in robust cold rolled steel box with three emergency call buttons and manufactured to a high standard, it is offer increased resistance to vandalism, and ensure that the primary function of communications is maintained at all times, resulting in a highly reliable product with a long MTBF. The embedded installation method adopts anti-removal screws, which is stable and reliable after installation, and ensures that the main function of communication is always maintained. It is the best choice for the prison communication call system. Technical Parameters Power Supply Telephone Line Powered Voltage DC48V Standby working current ≤1mA Frequency Response 250~3000 Hz Ringing level ≤80dB(A) Anticorrosion grade: WF1 WF1 Ambient temperature -20～+60℃ Atmospheric pressure 80～110KPa Relative humidity ≤95% Riot class IK10 Installation method Embedded Features 1. Standard analog telephone, powered by telephone line, no external power supply required 2. 304 stainless steel shell, strong impact resistance 3. Anti-vandal earpiece and armored wire, strong shock resistance 4. Waterproof grade IP66 5. Standard color is silver, optional color is available upon request 6. Easy to install

60m Steel Tubular Tower for Telecommunication 3-Legged Telecom Steel Tower Self Supporting Microwave Lattice Tower Steel grades Chinese standard Q345B, which equal to ASTM A572 Grade 50 Chinese Q235B, which equal to ASTM A36 Bolts: Chinese grade 6.8 and 8.8, which equal to ASTM A394 Hot dip galvanization: GB/T 13912-2002, which similar to ASTM A 123 The welding :AWS D1.1 or CWB standard If the thickness of the material not less than 5mm,The min average thickness of the zinc of steel tower is more than 86um.

2 Units CWDM Mux/Demux FMU Plug-in Module in 2-Slot 1U 19" Rack Chassis GEZHI 16CH CWDM Mux/Demux FMU Plug-in Module is built a 16CH Mux LGX cassette + 16CH Demux LGX cassette in one 19" 1U Rack-mount. The wavelenght of 16CH CWDM Mux/Demux FMU Plug-in Module is 1310 to 1610nm. The 16CH CWDM Mux/Demux FMU Plug-in Module offers an high channel isolation WDM solution for data centers and Metro access applications. And working at dual optical network fiber. Features Applications Wide pass band Epoxy free optical path High channel isolation High Quality & Low Cost Fully compatible with all ITU-T CWDM optics Combined mux and demux unit, working on two network fibers Fiber optical amplifier WDM network Line monitoring Dark fiber networks Access Network Optical video networks Telecommunication S , pecification Parameter Unit 16CH CWDM Mux/Demux Mux Demux Channel Wavelength nm 1310~1610nm Center wavelength Accuracy nm ±0.5 Channel Spacing nm 20 Channel Passband (@-0.5dB bandwidth nm >13 Max Insertion Loss dB <4.5 or with skip <3.5 <4.5 or with skip <3.5 Channel Ripple dB 0.3 Isolation Adjacent dB >30 Non-adjacent dB >40 Inertion Loss Temperature Sensitivity dB/℃ <0.005 Wavelength Temperature Shifting nm/ ℃< , br> <0.002 Polarization Dependent Loss dB <0.1 Polarization Mode Dispersion dB <0.1 Directivity dB >50 Return Loss dB >45 Maximum Power Handling mW 300 Opterating Temperature ℃ -20~+70 Storage Temperature ℃ -40~85 Package dimension mm 2-slot 19" 1U Rackmount

The USRP-LW N210 provides high-bandwidth, high-dynamic range processing capability. The USRP-LW N210 is intended for demanding communications applications requiring this type of rapid development. The product architecture includes a Xilinx® Spartan® 3A-DSP 3400 FPGA, 100 MS/s dual ADC, 400 MS/s dual DAC and Gigabit Ethernet connectivity to stream data to and from host processors. A modular design allows the USRP N210 to operate from DC to 6 GHz, while an expansion port allows multiple USRP-LW N210 series devices to be synchronized and used in a MIMO configuration. The USRP-LW N210 can stream up to 50 MS/s to and from host applications. Users can implement custom functions in the FPGA fabric, or in the on-board 32-bit RISC softcore. The FPGA also offers the potential to process up to 100 MS/s in both the transmit and receive directions. The FPGA firmware can be reloaded through the Gigabit Ethernet interface. The USRP-LW N210 is an enhanced version of the USRP N200 that includes a larger FPGA. This allows users to move additional functionality into the FPGA, increasing the maximum processing capability up to 100 MS/s in both directions while offering potential improvements in processing latency. 1. Maximum transmission rate:50MS/s 2. Gigabit Ethernet connection 3. MIMO cable connection—based on only one single transceiver link per USRP-LW N210, so MIMO construction must be built by two or more USRP-LW N210s 4. Onboard FPGA processing 5.FPGA:Xilinx Spartan XC3SD3400A 6. ADCs:14 bits- 100 MS/s 7. DACs: 16 bits - 400 MS/s 8. Ability to lock an external 5 or 10 MHz reference clock 9. Optional internal GPS servo clock – USRP-LW N210 GPSDO

Its an economical manual singer-layer shielding box, which allows engineers to create an affordable end-to-end test environment with each UE shielded individually. It adopts the isolating visible window to help users to keep monitoring for the whole testing procedure directly from outside. It is most suitable to test small devices like RF modules,smart phones,WIFI,Bluetooth,smart grid equipment,automotive electronics, unmanned aerial vehicles,smart home and so on. Rf Test shield box specifications: Working frequency(GHz) 100MHz～6GHZ Shielding effect ≥80 dB@2.4GHz/5.8GHz Interface Type (Kindly confirm which interface need) VGA,DB9,DB25,2.0USB,3.0USB,SMA,RJ45,BNC,R , CA,DC,AC,HDMI Numbers of filters 1 pc as default Material Metal plate Inner working dimensions (mm) 270(W)*380(D)*68(H) Outside dimensions (mm) 301(W)*462(D)*124(H) Weight (kg) 10 kg Filter modules options for shielded boxes Shielded boxes can be extended with different types of filters. All available types of filters can be found below.

Full Network for 2G 3G 4G 5G Multi Band mobile signal booster repeater DEVICE REPEATER PARAMETER Band5 CDMA 850MHz 825-835MHz/870-880MHz(Uplink / Downlink ) Band8 GSM 900MHz 889-915MHz/934-960MHz(Uplink / Downlink ) Band3 DCS 1800MHz 1710-1755MHz/1805-1850MHz(Uplink / Downlink ) Band1 WCDMA 2100MHz 1940-1955MHz/2130-2145MHz(Uplink / Downlink ) Band3 FDD-LTE 1800MHz 1755-1785MHz/1850-1880MHz(Uplink / Downlink ) Band38 TDD-LTE 2600MHz 2575-2675MHz(Uplink / Downlink )

Specification Model UC8144 Operation Wavelength 1260 ~ 1650 nm Band wide @-10 dB ≥390 nm Output Power ≥10dBm Spectral Density ≥-28dBm/nm Connector Type FC/APC (other adaptor can be customized) Spectral Density Stability within 15mins ＜± 0.03 dBm/nm Output Power Stability within 15mins ＜±0.01 dB Output Power Stability within 8 hrs ≤± 0.05 dB Operation Model CW Fiber Type Single Mode SFM-28 Operation Temperature 0 ～ +40℃ Storage Temperature -30 ～ +80℃ Power Supply AC 110 ~ 220 V±10%, 50Hz/60Hz, 20W Dimensions 235mm W, 55 mm H, 320 D mm Weight 3.0 kg

About PTFE wire 1. Polytetrafluoroethylene wires allow wiring systems to be used and operated in the most demanding of environments. 2. PTFE is resistant to lubricants and fuels, very flexible, plus it has excellent thermal and electrical properties. Application: Internal wiring for electronic equipment and small electrical equipment; Used for Oil equipment, Electric machinery, Automotive cables, Outdoor lighting, PTC thermistors, Electric components etc. Product Features: Good corrosion-resistance, almost doesn't melt any organic imp regnant, Oil- resistance, strong acid-resistance, strong alkali-resistance, oxidant- resistance and so on. bear the good electric insulated capability, high voltage-resist, moisture-resistance, high insulation resistance; flame- retardant, Anti-ageing, long age of usage. Properties: 1. Rated voltage: 600V or Lower 2. Working temperature: -60℃ ~ 250℃, short-term temperature 350℃ 3. Conductor: Silver / Tinned Plated Stranded Copper 4. Insulated: Ptfe teflon insulated 5. Available Colors: White, Blue, Red, Yellow, Black, Brown, Gray, Violet... Silver coated copper conductor PTFE insulation lead wire Silver coated copper conductor PTFE insulation shield lead wire Silver coated stranded copper conductor PTFE insulation shield lead wire Silver coated stranded copper conductor PTFE insulation twisted shield lead wire

Optical patch Cord and pigtail is the basic parts for optical transmission. They are consist of fiber optic cable and terminated connector. Wolon has strong capacity and experience to support any large demand. Product details Product MPO-LC Fiber Optic Patch Cord armoured Multi mode 8 Core OM3 PVC LSZH 3.0mm Pre-Terminated Connector MPO to LC Polished UPC or APC Fiber Count 2 Fibers or other for options Fiber Mode SM or MM Jacket Color Blue, Black Breakout OD 2.0mm, 3.0mm Insertion Loss < 0.2 DB Return Loss >50db Jacket Materials PVC LSZH Product Keywords Armored Fiber Opitc Patch Cord

This is a High Gain PtP Antenna Dual Polarized 2x2 MIMO Parabolic Dish Antennas It is a perfect match for 802.11a MIMO access points and bridges. It also supports the new 6.2 GHz and 6.4 GHz radios now available. Both ports support 4.8 GHz - 6.5 GHz operation. Features Expanded Coverage: 4800 MHz to 6500 MHz 2 ports, Suits for Radio like RocketM5, Mimosa C5c Cross Polarized, ±45° Polarization (Polarization Diversity) All-Weather Outdoor Operation MIMO Applications 5 GHz 802.11a Wi-Fi Hotspots WISP Base Station WiMAX Electrical Specifications Frequency Range 4800-6500 MHz Gain (dBi) 29 dBi Horizontal Beamwidth 6.5° Vertical Beamwidth 6.5° VSWR <1.8 Polarization ±45° F/B Ratio ≥30 dB Impedance 50Ω Mechanical Specifications Connector Customized Dimensions 420*420*120 mm Weight (Kg) 20kg/4pcs Lightning Protection Dc Ground Rated Wind Speed 126/ms Mounting Type Pole Mount Suitable pole diameter Ф30-80mm

Description: The KP-HDT5000 Back pack COFDM video transmitter is specially designed for man- pack outdoor tactical mission for soldiers. KP-HDT5000 wireless video audio transmitter adopts latest COFDM technology, which has strong anti-interference / anti-jamming ability in harsh environment. With a back pack frame and a 20Ah battery integrated, the KP-HDT5000 digital transmitter is a completed military manpack microwave wireless transmission system, which helps to achieve real time video audio communication with command center when in critical mission. It's easy to reach 3~5km NLOS (non line of sight) distance with different adjustable RF transmitting power. KP-HDT5000 is a wireless digital video transmitter, which is easily to be set the significant specification, like frequency, bandwidth, encryption, and RF power by LCD configure panel. Feature: Back pack design for easy opteration; Latest COFDM modulation; High performance Li-battery, 3-5 hours continuous work; Two-way audio communication; AES 128/256bits encryption; H.265 video compression;

The KP-HDT5000 Back pack COFDM video transmitter is specially designed for man-pack outdoor tactical mission for soldiers. KP-HDT5000 wireless video audio transmitter adopts latest COFDM technology, which has strong anti- interference / anti-jamming ability in harsh environment. With a back pack frame and a 20Ah battery integrated, the KP-HDT5000 digital transmitter is a completed military manpack microwave wireless transmission system, which helps to achieve real time video audio communication with command center when in critical mission. It's easy to reach 3~5km NLOS (non line of sight) distance with different adjustable RF transmitting power. KP-HDT5000 is a wireless digital video transmitter, which is easily to be set the significant specification, like frequency, bandwidth, encryption, and RF power by LCD configure panel. Feature: Back pack design for easy opteration; Latest COFDM modulation; High performance Li-battery, 3-5 hours continuous work; Two-way audio communication; AES 128/256bits encryption; H.265 video compression; Adjustable frequency, bandwidth, RF power on touch screen LCD configure panel.