Telecom Equipment & Accessories

Special deep impression of you! Tellsing, we supply cable&wire equipments and technology for all the safe lines manufacturers! 　 Tellsing developing and manufacturing range as　 unders:TSPΦ25,Φ30,Φ40,Φ50,Φ60,Φ70,

Product Overview . Bluetooth beacon based on low power Bluetooth chip . Powered by two ER14250 batteries and can be used for up to 5 years . Broadcast UUID, Major, Minor, RSSI, battery power, Bluetooth name, Bluetooth MAC address . Beacon parameters can be set through the mobile phone APP . Broadcast distance can reach 80 meters . Using 3M glue can be easily installed and fixed . Firmware have connect type and non-connect type . With temperature and humidity sensor and acceleration sensor optional . With unique design for IP67 protection . CE, RoHS, FCC, KC compliance . With acceleration sensor Specification: Hardware Parameters Hardware parameters Antenna PCB Antenna Battery ER14250 2*1200mAh Voltage 3.6V Dimensions (D×H) 53.86*24.93mm Wireless Performance Wireless standard Bluetooth ® 4.2 Frequency range 2400MHz---2483.5MHz Data rate 1Mbps Modulation mode GFSK Modulation Encryption AES HW Encryption Transmission power Tx Power -20 to +4 dBm in 4 dB Steps Reveiving sensitivity -93dBm at 1 Mbps BLE Work mode Peripheral Other Environment Working temperature: -40℃~85℃ Storage temperature: -40℃~85℃ Working humidity: 10%~90% Non-condensing Storage humidity: 5%~90% Non-condensing

Product Description The fibers, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Two FRP as strength member applied over the inner sheath, the cable is completed with PE outer sheath. Characteristics 1. special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property; 2. Two parallel steel strength members ensure good performance of crush resistance to protect the fiber; 3. Single steel wire or messengers as the additional strength member ensures good performance of tensile strength; 4. Simple structure, light weight and high practicability; 5. Novel flute design, easily strip and splices implify the installation and maintenance; 6. Low smoke, zero halogen and flame retardant sheath. Applications 1. Used in access network or as access cable from outdoor to indoor in customer premises network; 2. Used as access building cable in premises distribution system, especially used in indoor or outdoor aerial access cabling.

Good Quality Tubular Galvanized Steel High Mast Light Pole with for mounting 6 high power LED lamps The popular steel light poles include 20m to 30m high mast light pole, 10m-15m tubular steel pole, 5m to 12m solar street light pole, conical or tapered light pole, hexagonal or polygonal lighting pole, straight round street light pole and octagonal lighting pole. There are 2 ways of installation of the steel poles, one is directly buried into ground and the other way is fixed to steel frame foundation with anchor bolts by base plate with bolts and nuts. Specifications Description , s High mast steel tower, galvanized steel sports and stadium light pole, street light pole, traffic signal light pole HS Code 7308900000 Material Low carbon weldable structural steel Grade GB Q235, Q345, BS4360, ASTM A36 etc. Yield Strength 235-355MPa Height 5m to 35m or other specified height Thickness 3mm to 15mm, depending on height of pole. Pole Shape Conical/tapered, straight round/cylindrical, square or rectangular, polygonal, octangal etc. Diameter or Dimensions Subject to height of pole and required mechanical properties. Design Single, dual or multiple straight or curved arms and brackets Surface Finish Hot dip galvanization plus powder or PVDF coating (optional) Galvanization 65-100 Microns Coating 35-80 Microns Color Silver, grey, black, white, blue, yellow etc. Applications Roadways, streets, highways, stadiums, public sqaures, airports, railway stations, communities, parking lots, gardens etc. The steel light poles are designed with single, dual or multiple arms and brackets for mounting lamps, solar panels, CCTV cameras or other facilities as per requests. The designs of arms and brackets are also customized to requirements for different connectors of luminairs or other facilities. With custom special designs, the light poles are not only used for lighting, monitoring or traffic signal control but also for city landscape decorations.

4G Mobile Wireless Router 12V 1A Supply WAN LAN Product Description 4G LTE Router LS-9600 is supports both 4G CAT4 and IEEE 802.11 b/g/n protocols, to equip the users enjoying the high speed internet surfing experience. ​Key feature: WCDMA,LTE FDD,LTE TDD Bands Support WAN/LAN/PSTN Internal 2*2 MIMO antennas, super powerful signal TR069 remote management

Product Description 1*XPON+2GE+1POTS 86-Type ONU terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. The panel-type ONU can be easily installed in 86-type electrical boxes on enterprise campuses. These boxes are based on the mature Chipset technology, which have high ratio of performance to price, and the technology of Layer 2/3, and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah, ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.

Double Layer Aerial ADSS Cable is used for communication cable of overhead high - voltage electricity transmission system,it also can be used as communication cable at the areas where lighting is frequent or long distance. Characteristics 1: Durable, and High Performance Cable solution for the Electrical Power networks and other Aerial use. 2: Can be Installed with a live line , No need shut down power supply. 3: Can be designed to the longest span is 1000meter or more . 4: Cost Effective solution for short span 5:Meet the demand for high-growth, high-bandwidth networks. 6:Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops. Structure Characters: All dielectric Loose tube wifh mon-metalic strengthen member High flexible amaid yarn Can work at electrix field≤25KV/min a ling period Appicable fieds: 1: Long-distance teecom,LAN in high -votage area or access to telecom network 2: Installation: Sef-support aerial 3: Aerial Application including power transmission and distribution networks 4: Duct Installations 5: Good to use in Electromagnetic fields, no need for expensive cable shielding or grounding accessory Construction: 250μm Colored Fiber PBT loose Tube Tube Filling Compound ( Gel ) FRP central strength member Cable filling compound PE inner sheath Aramid yarn PE outer sheath

Product's features: •Easy Installation; •Strong magnetic Base; •Durable Copper Alloy Whip; •High quality housing plastic reaches RoHs & REACH certification; •Pure copper wire; The Pure copper wire will enhance the transmission performance of the DTV signal. Product Parameters: Material Plastic Connector IEC (M) / F ( M) Type Model Number BIO-V069 Gain 3-26 dBi Mount type Magnet Mount Color Black Frequency Range VHF:147-230MHz UHF:170-862MHz VSWR 2.0:1MAX input impedance 50/75 Ohm Polarization Linear Cable type RG174/1.5c-2v(optional)

Procet Indoor DIN Rail Industrial Zinc Alloy IP40 PoE Surge protector, operating voltage 60Vdc(Max), Output 110W (Max.), Surge protection 10Kv, Working temperature at -40℃ to 85℃. Technical Parameter : Parameter Description Key Features DIN rail mounted DIN rail is the ground wire Part Number PT-PR01G-DIN Ports condition PoE Port*2 Regulatory Compliance IEEE802.3bt or PoE ++ RoHS Compliance WEEE Compliance Pass-Through Data Rates 10/100/1000 Mbps Output Maximum Operating DC Current:1A for 2 pairs 2A for 4 pairs Maximum 110W Input Operating Voltage:60Vdc (Max.) Working Environment Operating Temperature: -40℃ to 85℃ Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40℃ to 85℃ Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters PoE Surge Protection Max Discharge Current: 10KA(8/20us,1.25KA per line) Protected Line: 1,2,3,4,5,6,7,8 Common Mode Protection Level(10/700us): 10KV Differential Mode Protection Level(10/700us): 1.5KV Insertion Loss @10MHz/100MHz:-1db Return Loss @10MHz/100MHz: -20db Response Time:5ns Warranty 5 year Safety Approvals CE

GYTA33 is an outdoor communication optical cable of metallic strength member of the loose tube jelly-filled structure, with Al-polyethylene laminated sheath and single-layer thin round steel wire armored polyethylene outer sheath. The loose tubes are made of high modulus plastics (PBT) and filled withwater resistant filling gel. Loose tubes are stranded around the metallic central strength member, cable core is filled with cable filling compound. The corrugated aluminum tape is longitudinally applied over the cable core, and combined with polyethylene (PE) inner sheath. Galvanized steel wires are stranded around inner sheath, and then extruded with PE outer sheath.

DESCRIPTION Fiber optic splice closure FOSC-5016H is a horizontal or inline type closure, 2 inlets and 2 outlets. It belongs to the mechanical pressure seal splice closure system, and it is widely used for the terminations of communication fiber optic cables. Fiber optic closure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. Faso provides various shapes closure of Inline type. All the closures we offered are with a great sealing performance. High quality plastic material also ensures the durability whether the closure is in air, in pipeline or buried underground.

A Fiber Optic Splice Sleeve is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. It is friendly operated to the optic fiber during installation without damaged and micro bending. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. The Fiber Optic Splice Sleeve is commonly known as an optical fiber heat shrink protect sleeve. It is a protective optical fiber splicing component composed of a special cross-linked polyolefin and a hot melt tube.

1. Overview ● STR5001X is designed as HGU (Home Gateway Unit) in deferent FTTH solutions, The carrier-class FTTH application provides data service access. ● STR5001X is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● STR5001X adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X 2. Functional Feature ● Support EPON/GPON mode and switch mode automatically ● Support ONU auto-discovery/Link detection/remote upgrade of software ● Support Route PPPoE/IPoE/Static IP and Bridge mode ● Support IPv4/IPv6 Dual mode ● Support Firewall function and IGMP multicast feature ● Support LAN IP and DHCP Server configuration ● Support Port Forwarding and Loop-Detect ● Support TR069 Remote Configuration and maintenance ● Specialized design for system breakdown prevention to maintain stable system 3.Application ● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Business：INTERNET、IPTV etc Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power:+0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Chip Spec RTL9601D ,CPU 300MHz,DDR2 32MB Flash SPI Nor Flash 16MB LAN Interface 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector LED 4 LED, For Status of PWR、LOS、PON、LINK/ACT Push-Button 2,For Function of Power on/off,Reset Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply DC 12V/0.5A Power Consumption <3W Dimension 120mmx78mmx30mm(L×W×H) Net Weight NET Weight 0.13KG, Gross Weight 0.35KG

Minimum Order: 1 bags

Product Overview EPON OLT is a high integration and medium capacity cassette EPON OLT designed for operators’ access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction. The OLT provides 8 downlink 1.25G EPON ports, 8 * GE LAN Ethernet ports and 4 *10G SFP for uplink. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU hybrid networking. (EPON OLT 4 port ) ITEM: 4/8 PON port, Service Port: 4/8 PON port 8*GE, 4"10G SFP optical Redundancy Design Dual Voltage Regulators Power Supply ‘AC: input100~240V * 2 47/63Hz Power Consumption =45W Dimensions (Width x Depth x Height) 440mm x44mmx260mm Weight (Full-Loaded) =4.5kg Environmental Requirements: Working temperature: ~10°C~55°C Storage temperature: -40°C~70°C Relative humidity: 10%~90%, non-condensing

Minimum Order: 1 bags