Telecom Equipment & Accessories - Others

Procet Indoor DIN Rail Industrial Zinc Alloy IP40 PoE Surge protector, operating voltage 60Vdc(Max), Output 110W (Max.), Surge protection 10Kv, Working temperature at -40℃ to 85℃. Technical Parameter : Parameter Description Key Features DIN rail mounted DIN rail is the ground wire Part Number PT-PR01G-DIN Ports condition PoE Port*2 Regulatory Compliance IEEE802.3bt or PoE ++ RoHS Compliance WEEE Compliance Pass-Through Data Rates 10/100/1000 Mbps Output Maximum Operating DC Current:1A for 2 pairs 2A for 4 pairs Maximum 110W Input Operating Voltage:60Vdc (Max.) Working Environment Operating Temperature: -40℃ to 85℃ Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40℃ to 85℃ Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters PoE Surge Protection Max Discharge Current: 10KA(8/20us,1.25KA per line) Protected Line: 1,2,3,4,5,6,7,8 Common Mode Protection Level(10/700us): 10KV Differential Mode Protection Level(10/700us): 1.5KV Insertion Loss @10MHz/100MHz:-1db Return Loss @10MHz/100MHz: -20db Response Time:5ns Warranty 5 year Safety Approvals CE

A Fiber Optic Splice Sleeve is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. It is friendly operated to the optic fiber during installation without damaged and micro bending. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. The Fiber Optic Splice Sleeve is commonly known as an optical fiber heat shrink protect sleeve. It is a protective optical fiber splicing component composed of a special cross-linked polyolefin and a hot melt tube.

30 Meter Monopole Painting Coating Wifi Tower Monopole Tower What Is Monopole Tower? Monopole Tower belongs to the technical field of pipe towers, and includes a working platform connected with the tower body and the upper part of the tower body. The bottom wall of the tower body is provided with a lower door hole, and the wall of the work platform is provided with a door opening, and the antenna bracket is fixed on the fence of the working platform, and the structure of the tower body is set by the main pole of the ladder and the main pole of the ladder. A ladder formed by a crosspiece, the main pole of the ladder is fixedly connected with the support frame, and the support bracket is screwed with the connecting bracket disposed on the inner wall of the tower. The advantages of the Monopole Tower are: the structure is simple and reasonable; the appearance is beautiful; the installation and use are convenient. And compared to the angle steel tower, the footprint is smaller. Highlights of JIAYAO self-suppo , rting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life.

Wholesaler Types Of Communication Towers Features: 1. The seamless steel pipe is used as the column material, the wind load coefficient is small, and the wind resistance is strong. 2. The tower column is connected by an outer flange, and the bolt is pulled, which is not easy to damage and reduces maintenance costs. 3. The tower is arranged in a triangular shape to save steel. 4. The roots are small, the floor space is small, the land resources are saved, and the site selection is convenient. 5. The tower body is light in weight, and the new three-leaf cutting board foundation reduces the basic cost. 6. Truss structure design, convenient transportation and installation, and short construction period. 7. The tower type is designed with the wind load curve changing, and the lines are smooth. It is not easy to collapse in case of rare wind disasters, reducing human and livestock casualties. 8. The design conforms to the national steel structure design specification and tower design rules, and the structure is safe and reliable. Highlights of JIAYAO self-supp , orting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life. What Is The Details of JIAYAO 3 Legged Tubular Steel Tower? Design standard TIA/EIA-222-G/F Welding standard AWS D1.1 Galvanization standard ASTM A123 Design Wind Speed Up to 200 km/h Angular steel Material quality Mild Steel:Q235B/ASTM A36/S235JR High Steel:Q345B/ASTM A572/S355JR Allowable  , deflection 0.5 ~1.0 degree Bolt grade Gr 4.8, Gr 6.8, Gr 8.8 Marking Hydraulic Press Stamping What is the height of JIAYAO 3 Legged Tubular Steel Tower we can provide? 5m up to 50m is the tower height we can provide. What antenna can be mounted on JIAYAO 3 Legged Tubular Steel Tower? Type of antenna Description Panel antenna (sector antenna) GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m Parabolic reflector(dish antenna) Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m RRU Radio Remote Unit:0.45m×0.32m×0.25m WIFI antenna Grid or parabolic directional antenna / yagi / omnidirectional antennas Other Antenna VHF/UHF Dual-band Antenna FM antenna

Galvanized Microwave Antenna And Communication Self Supporting Tower 4 Legged Angular Steel Tower What Is 4 Legged Angular Steel Tower? 4 legged angular steel tower is a kind of self-supporting communication tower，It can also be called 4 legged angular steel communication tower, telecommunication tower, antenna tower. 4 legged angular steel tower are higher steel structures used all over the world for communication applications. Their function to support antennas for telecommunications, broadcasting and WIFI internet. 4 legged angular steel tower is usually come with pre-designed accessories, just like platforms, ladders with cable tray, antenna brackets, aviation light brackets and fall prevention device, etc. 4 legged angular steel tower are based on either ground or building, and they are commonly designed in trusses structure to carry the wind loads and seismic loads. 4 legged angular steel tower is easy to process, transport and install. The overall rigidity of the angle steel tower is large, the bearing capacity is strong, and the technical application is mature. Highlights of JIAYAO self-suppor , ting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life.   What Is The Details of JIAYAO 4 Legged Angular Steel Tower? Design standard TIA/EIA-222-G/F Welding standard AWS D1.1 Galvanization standard ASTM A123 Design Wind Speed Up to 200 km/h Angular steel Material quality Mild Steel:Q235B/ASTM A36/S235JR High Steel:Q345B/ASTM A572/S355JR Allowable  , deflection 0.5 ~1.0 degree Bolt grade Gr 4.8, Gr 6.8, Gr 8.8 Marking Hydraulic Press Stamping What is the height of JIAYAO 4 Legged Angular Steel Tower we can provide? 50m up to 120m is the tower height we can provide. What antenna can be mounted on JIAYAO 4 Legged Angular Steel Tower? Type of antenna Description Panel antenna (sector antenna) GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m Parabolic reflector(dish antenna) Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m RRU Radio Remote Unit:0.45m×0.32m×0.25m WIFI antenna Grid or parabolic directional antenna / yagi / omnidirectional antennas Other Antenna VHF/UHF Dual-band Antenna FM antenna

Hot Dip Galvanized Mobile Phone Signal Bts Telecommunication Tower Product Description Our company is a professional steel tower manufacturer with ISO certificates based in China. Supported by the team of professional engineers,technicians,skill workers,we are dedicated to providing our global customers with high quality telecom towers. The detailed information is specified in the following table.We sincerely look forward to cooperating with you.  1.key Details: Place of Origin: Hebei, China (Mainland) ; Brand Name: Jaoyao or OEM ; Model Number: Telecom Tower. Surface treatment: Hot Dip Galvanizied or painted. 2.Packaging & Delivery: Packaging Details: Telecom tower will be bundled by Galvanized strapping as per client's requirements. Deliver:Shipped in 20 days after payment from Tianjin port. Tower members: One steel tower is separated into several bundles. Bolts: Packing material is robust nylon bag or steel drum. We are telecom tower manufacturer. 3. Technical Data Design 1. Design Code TIA/EIA-222-G/F Structure Steel 2. Grade Mild Steel High Tensile Steel GB/T 700:Q235B, Q235C,Q235D GB/T1591:Q345B, Q345C,Q3455D ASTM A36 ASTM A572 Gr50 EN10025: S235JR, S235J0,S235J2 EN10025: S355JR, S355J0,S355J2 3. Design ,  Wind Speed Up to 250 km/h 4. Allowable deflection 0.5 ~1.0 degree @ operational speed 5. Te , nsion strength (Mpa) 360~510 470~630 6. Yield strength (t≤16mm) (Mpa) 355 235 7. Elongation (%) 20 24 8. Impact strength KV (J) 27(20°C)---Q235B(S235JR) 27(20°C)--- Q345B(S355JR) 27(0°C)---Q235C(S235J0) 27(0°C)---Q345C(S355J0) 27(-20°C)---Q235D(S235J2) 27(-20°C)---Q345D(S355J2) Bolts & Nuts 9. ,  Grade Grade 4.8, 6.8, 8.8 10. Standards for mec , hanical properties 10.1 Bolts ISO 898-1 10.2 Nuts ISO 898-2 10.3 Washers ISO 6507-1 11. Standards for Dimensions , 11.1 Bolts DIN7990, DIN931, DIN933 11.2 Nuts ISO4032, ISO4034 11.3 Washers DIN7989, DIN127B, ISO7091 Welding 12. Met , hod CO2 Shielded Arc Welding & Submerged Arc We , lding(SAW) 13. Standard AWS D1.1 Marking 14. Method of marking  , of the members Hydraulic Press Stamping Galvanizing 15.  , Galvanization standard of steel sections ISO 1461 or ASTM A123 16. Galvanizatio , n standard of bolts and nuts ISO 1461 or ASTM A153 Test 17. Fact , ory test Tensile test,Elements analysis, Sharpy tes , t(impact test), Cold Bending,   Preece te , st,Hammer test Capacity 18. Maximum Production Capacity ,   50,000 TON per annum

Wifi Radio Antenna Mast Steel Tower 3 Legged Angular Steel Tower What Is 3 Legged Angular Steel Tower? 3 legged angular steel tower is a kind of self-supporting communication tower，It can also be called 3 legged angular steel communication tower, telecommunication tower, antenna tower. 3 legged angular steel tower are higher steel structures used all over the world for communication applications. Their function to support antennas for telecommunications, broadcasting and WIFI internet. 3 legged angular steel tower is usually come with pre-designed accessories, just like platforms, ladders with cable tray, antenna brackets, aviation light brackets and fall prevention device, etc. 3 legged angular steel tower are based on either ground or building, and they are commonly designed in trusses structure to carry the wind loads and seismic loads. 3 legged angular steel tower need less ground area and suit to construct in many situations. Highlights of JIAYAO self-su , pporting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life.   What Is The Details of JIAYAO 3 Legged Angular Steel Tower? Design standard TIA/EIA-222-G/F Welding standard AWS D1.1 Galvanization standard ASTM A123 Design Wind Speed Up to 200 km/h Angular steel Material quality Mild Steel:Q235B/ASTM A36/S235JR High Steel:Q345B/ASTM A572/S355JR Allowable  , deflection 0.5 ~1.0 degree Bolt grade Gr 4.8, Gr 6.8, Gr 8.8 Marking Hydraulic Press Stamping What is the height of JIAYAO 3 Legged Angular Steel Tower we can provide? 10m up to 50m is the tower height we can provide. What antenna can be mounted on JIAYAO 3 Legged Angular Steel Tower? Type of antenna Description Panel antenna (sector antenna) GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m Parabolic reflector(dish antenna) Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m RRU Radio Remote Unit:0.45m×0.32m×0.25m WIFI antenna Grid or parabolic directional antenna / yagi / omnidirectional antennas Other Antenna VHF/UHF Dual-band Antenna FM antenna