Switches

TB02 series miniature thermal protector can be divided into two types, one is pure overheating protection type, the other is overheating and overloading double protection type. It has high reliability, repeatability and temperature control accuracy, sensitive, long life, small size. It is widely used in the fields of batteries, electronic ballasts, micro motors, LED, transformers, motors, pumps, electric tool, smart homes, beauty equipment and medical devices and so on. Rated Current&Voltage DC12V/4A、 DC24V/3A、 AC115V/3A、 AC250V/2A Operating Temperature 30°C~160°C TB02-BB8D Plastic Shell Size 15mm ( L ) *5.4mm ( W ) *2.4mm ( H ) 13.5mm ( L ) *5.4mm ( W ) *2.4mm ( H ) 12mm ( L ) *5.Omm ( W ) *2.0mm ( H ) TB02-BB1D Metal Shell Size 14mm ( L ) *5.Omm ( W) *2.4mm ( H ) 11.5mm ( L ) *5.Omm ( W ) *2.4mm ( H ) Lead Wire UL3266 AWG22#、UL3135 AWG24#

Minimum Order: 1000

Cascading POE Fiber Switch Full Gigabit 4 POE Ethernet and 2 Optical Ports Technical Parameters Network Ports Four 10/100/1000Base-T(X) adaptive POE Ethernet port Network Ports Properties RJ45 Network Ports protocol IEEE802.3,IEEE802.3U,IEEE802.3X protocol Ports Features Support half-duplex, full-duplex, auto-negotiation mode Ports Features Support MDI/MDI-X adaptation Delay ﹤9.6μS Bit Error Rate ﹤1/1000000000 Backplane Bandwidth 12G Cache 1M MAC address table 1K Power consumption ≤5W Transmission Rate 10/100/1000Mbps Optical Fiber Ports 2 10/100/1000Mbps Single Mode FC Optical Fiber Ports Optical Fiber Ports Properties Wave Length:1310/1550nm Transmission Distance 20-100KM POE protocol IEEE802.3af/at Pin Definition V+,V+,V-,V- Corresponding to 1,2,3,6 Output Power 15.4W Rated Input voltage +44~+57VDC Operating Temperature -40 ~ 85℃

1 Wire tail treatment: cut the wire tail flat, do not hit the carbon paste on the back of the terminal - a layer of single-sided adhesive pet for reinforcement. When it is necessary to hit the terminal, lead the front of the terminal to the terminal riveting pressure. Note that the double tail line should be cut at the 1.5 cm rounded outlet at the bottom of the tail line. 2 Punching: on the assembled circuit, the four corners are aligned, the open hole is extended by 1 mm, connected all around, and bound to the assembled circuit. Knock it down with something. When knocking on the door, be careful if the line is hit. 3 Stamping forming: the standard requires accuracy. According to the supplied standard, the thickness, standard and shape of printing materials, the standard of touch switch is subject to variable processing to obtain accurate structural standard. The quality of stamping die is the key to directly affect the forming quality of light touch switch shell. High quality convex pressing adopts hot pressing. Its advantage is that the kneading convex shape is not deformed, with a sense of hierarchy and three-dimensional feeling. 4 Inspection: check whether there is any appearance deviation and poor silk screen printing. Then, according to the circuit principle, check one by one and touch the band lights

Product Specification: Working temperature: -20-60°C Supply voltage: DC12/24V Output voltage: DC12/24V Output: 1 channel Sensing distance: 5 ~ 8 M. Ham should angle: 60 degrees. Output current: <6A Delay time: 1-10min (adjustable) External dimension: L76 Χ W45 Χ H34 mm Packing size: L104 Χ W64 Χ H41 mm Net weight: 32g Gross weight: 50g Application Description: The human body is an infrared detection sensor switch controller; the use of infrared detection controls the load of the switch. Users according to actual needs, the human body sensors installed in the appropriate environment.

LIGHTEARTH is a professional uv tube supplier and uv ballast manufacturer, we provide electronic ballast china, amalgam uvc lamps, uv sterilization lamp and etc.if you want to know more, please contact us.

SMD high-power resistor details Volume: 2010 (5025) 2512 (6432) Size: 2010=5.0*2.5, 2512=6.4x3.2 Resistance: 0R—500M 0Ω—22MΩ full range Power: 1W, 2W, 3W Deviation: F=±1%, J=±5% Features: Small size and light weight; Adapt to reflow soldering and wave soldering; Stable electrical performance and high reliability; The assembly cost is low, and it is matched with the automatic placement equipment; Can be applied to: smart lights, smart toilets, smart home appliances, smart kitchen appliances, etc.

Minimum Order: 4000

Feature: 1. Precise design terminal type adequate for DIP IC pitch size (multiple of 2.54mm). 2. Epoxy sealing treatment, free of flux entry. 3. Several LED colors options. 4. Side-actuated with right angle terminal. Applications : Operating switches in all types of electronic equipment such as audio apparatus, office equipment, communications apparatus, TV sets, VCRs, etc. Specifications: 1. Item : Standard 2. Rating: 0.1A 30VDC 3. Insulation Resistance: 100MΩ Min (at 500 VDC) 4. Dielectric Strength: AC 500V (50/60 Hz for 1 minute) 5. Contact Resistance: 50mΩ Max. (Initial) 6. Electrically Life: 10,000 Cycles Min 7. Ambient Temperature: -10°C~ +80°C 8. Operating Force: 150 ± 100gf (Momentary) 9. Operating Force: 250 ± 100gf (Alternate) 10. Operating Force: 200 ± 100gf (Momentary With Click)

Feature: 1. Snap-in type, can be mounted directly on P.C.B board. 2. Several LED colors options. 3. Adequate for DIP & SMT. 4. Several LED colors or bi-color or RGB color options. Applications: Operating switches in all types of electronic equipment such as audio apparatus, office equipment, communications apparatus, TV sets, VCRs, etc. Specifications: 1. Item: Standard 2. Rating: 50mA 12VDC 3. Insulation Resistance: 100MΩ Min (at 500 VDC) 4. Dielectric Strength: AC 250V (50/60 Hz for 1 minute) 5. Contact Resistance: 100mΩ Max. (Initial) 6. Electrically Life: 300,000 Cycles Min 7. Ambient Temperature: -25°C~ +70°C 8. Operating Force: 160 ± 50gf

A momentary foot pedal switch is commonly applied on agricultural heavy equipment, agricultural machinery, or medical equipment. It is also called an electric foot switch. There are two available options of momentary foot pedal switch at HIGHLY. One is made of metal die-cast, another is made of plastic. It is mainly used in medical equipment, stamping equipment, welding equipment, textile equipment, printing machinery, etc. Contact us to learn more about equipment foot pedal switches now!

Feature: 1. Precise and sophisticated design, user-friendly into application. 2. Workable stacking contact block, easy to install and disassembly. 3. Smart mounting ring design, can connect Φ22mm switchable to Φ30mm diameter. 4. Several push button type options, can completely fulfill your needs. 5. Several emergency stop of push button options. 6. Several positional removable options. 7. Several control box options. 8. Compliance to UL approval. Specifications: 1. Standards: EN60947-5-1, UL508 2. Approvals: UL, and CE marked 3. Utilization Category: AC15 A600 4. Min Current: 5V, 5mA, DC 5. Thermal Current (lth): 10A 6. Rated Insulation Voltage: 600V AC 7. Insulation Resistance: 100MΩ min. (DC 500V) 8. Contact Resistance: 50mΩ max. (Initial) 9. Shock Resistance: 500 m/s² 10. Max Switching Frequency: 1800 operation per hour 11. Mech. Life Expectancy: 1 x 107 Cycle min 12. Electrically Life Expectancy: 100,000 Cycle min 13. Vibration: IEC 68-2-6, 10-55Hz±1 Hz, Excursion: 0.35mm, 1 octave/min 14. Screw Torque: 0.8N-m for five seconds without any fracture 15. Tightening Torque: 2.5N-m for one min. without any fracture

Feature: 1. Power switch conforms to safety standards for electrical equipment. 2. Compact with a good space factor. 3. Snap-in type for easy mounting. 4. The color can be changed to correspond to the set design. 5. Lamps for 125V and for 250V respectively for illuminating type. Specifications: 1. Item: Standard 2. Rating: 12A 125VAC / 250VAC 3. Insulation Resistance :100MΩ min (DC 500V) 4. Dielectric Strength: AC 1500V (50/60Hz for 1 minute) 5. Contact Resistance: 50mΩ max. (initial) 6. Electrically Life: 10,000 cycle 7. Operating Force: 500±200 gf

Feature: 1. Several actuator type options. 2. Easy to identify by colorful actuator cover options. 3. Push button available. 4. UL approval. Specifications: HIGHLY Toggle switch pass UL, 3C approval, and other safety regulations certification, add button function. Several handles, color waterproof cover, marking plastic cover option for choice. Mainly used in automobiles, ship equipment, network communication, industrial instruments, medical equipment, etc. 1. Item: Standard 2. Rating: 10A 250VAC / 15A 125VAC / 15A 250VAC / 20A 125VAC / UL61058 3. Contact Resistance: 25mΩ max. (initial) 4. Dielectric Strength: AC 1000V (50/60 Hz for 1 minute) 5. Insulation Resistance: 100MΩ min. (at 500VDC) 6. Electrically Life: 30,000 Cycle min 7. Mechanically Life: 100,000 Cycle min

Feature: The sensors can accurately detect colors by light source, be able to detect subtle color difference. Used application : Vertical packaging machine, horizontal packaging machine, bag making machine, slitting machine, printing machine. Specifications 1. Item: Standard 2. Operating Voltage: 12-30 VDC 3. Sensing Distance: 8mm or 12mm ± 10%,Selectable 4. Current Consumption: ≦ 40mA 5. Power on Reset Time: 20ms 6. Response Time: 0.25mS for KH Series 7. 1mS for KS Series 8. Circuit Protection: Output short circuit. 9. Reverse polarity of supply voltage. 10. Max. Load Current: 120mA 11. Sealing: Conforming to IP65 (IEC). 12. Cable Length: 2 meter. 13. Extraneous Light: Sunlight 100,000 LUX. 14. Extraneous Light: Lamplight 10,000 LUX. 15. Output Indicator: Two output terminals selectable for Light-on and Dark-on. 16. Light Source: Red LED, Blue LED, White LED, Green LED

Feature: 1. High precision and metal die-casting body. 2. Easy to wire connection construction 3. High mechanical strength 4. Dust-proof construction Specifications 1. Item: Standard 2. Rating: 5A, 250VAC / 125VAC 3. Contact Resistance: 25mΩ max. (initial) 4. Insulation Resistance: 100MΩ min. (at 500VDC) 5. Dielectric Strength: 1,000VAC,50/60Hz for 1 minute 6. Service Life Mechanically: 1,000,000 operations min. 7. Service Life Electrically: 100,000 operations min