Other Switches

The F11 water flow sensor working principle is according to the Karman vortex which is installed in the eddy current plate in the slow flow area, which has 2*G1/2 connectors and its cable length and type can be customed. Generally, its rotation speed is proportional to the flow rate. That is when the magnetic core rotates the hall effect sensor will detect its speed so that the flow sensor can output the SWFM value. It can be used in gas boilers, water heaters, water dispensers, etc. F11 Flow Sensor Features It has a competitive price with high precision performance so it will be a perfect product be the alternative sensor for any brand. Meanwhile, this water flow sensor also has good electromagnetic compatibility & wide range of working temperatures. So, this lets it has a wide application range in different kinds of devices. The F1 series also has a very low-pressure loss when used and its testing components won’t be blocked by the particulate matter easily. So that it can reduce the maintenance cost and increase service life. For more flow sensor types, please click the link to check. Meanwhile, REGAL is a pressure & flowing industry expert, welcome to visit our homepage for more information. C2-C Level Sensor Specification Model Number F11 Water flow sensor Terminal Type 3-pin standard connector & wire (customizable) Interface type 2*G1/2 Operating flow interval 1 L/Min to 30 L/Min Dielectric Strength 500VAC(<3mA) Operating Voltage DC 4.75V to DC 5.25V Operating Current 15mA Low Output Duty Cycle 50% Overload Pressure 12Bar (@40℃) Working Temperature -15 to 85℃ Service life with loading 200000 cycles Protection Level IP20

Minimum Order: 10 long tons

Water Level Pressure Switch Features Using the high-quality silicon diaphragm, which can work in more than 150℃ for a long time. The B1 water level pressure switch has a wide range of use in hybrid or electronic control, such as the front-loading washing machine, dishwasher, etc. Which can control the single water level in the device. But if you need double water levels or multi-water levels control, welcome to contact us. Meanwhile, the Priming level, Reset level, and Overflowing level can be custom- made, which is dependent on your requirement. Besides, our level switch is a high degree of accuracy, which is +/-5mmw.c for the priming level. So you can use it on a demanding device. For more product information, welcome to click the link to see our product page. Meanwhile, REGAL is a pressure & flowing industry expert, welcome to visit our homepage for more information. B11 Level Switch Specification Model Number B11 Water Level Pressure Switch Circuit SPST-NO, SPDT Electrical Rating 1-2(3):10(2.5) @ 125/250 VAC; 1-6: 1(1) @ 125/250 VAC Or 0.1A @24VDC Gold plated contact Terminals 6.3*0.8 mm (#250)/ 4.8*0.5mm(#187) Priming Level Rang: 50~400mmw.c., Tolerance: +/-5mmw.c. Reset Water Level Rang: 20~350mmw.c., Tolerance: +/-5mmw.c. Overflowing Level Rang: 150~600mmw.c., Tolerance: +/-15mmw.c. Overload Pressure 760mmw.c. (7.6 kPa) Operating Temperature 85℃ max. Interface size 5.5mm outer diameter, suitable for 5mm inner diameter hose Working medium Air or non-corrosive gas Shell Material PA+GF with UL94-V0 Mechanical Cycles 100,000 cycles Electrical Cycles Main circuit: 250,00 cycles; Over-flow circuit: 5000 cycles Safety Certification CE (EN61058)

Minimum Order: 10 long tons

Coffee machine water pressure switch function The water pressure switch function in a coffee machine is usually used to control the volume of water and the pressure at which it flows, to ensure the quality and taste of the coffee. The water pressure switch works by detecting the flow and pressure of the water in the coffee machine, to regulate the concentration and taste of the coffee. This switch can adjust the flow and pressure of water to adapt to different types of coffee beans and to meet different taste demands, while also ensuring the efficiency and stability of coffee production. Coffee machine water pressure switching principle The principle behind the water pressure switch in a coffee machine is to use water pressure as an indicator of the flow rate and volume of water the machine is producing. It works by using a diaphragm or spring-loaded piston inside the switch that senses the water pressure inside the machine. When the water pressure reaches a certain predetermined level, the switch triggers a signal that turns off or regulates the flow of water to the coffee maker. This helps to prevent overpressure and ensure that the coffee machine is producing consistent and high-quality coffee with the correct water pressure and flow rate. Video Player 00:00 00:00 W32 Water Pressure Switch Specification Model Number W32 Water Pressure Control Switch Connector 6.3*0.8mm diameter Working Medium Water or other liquid Circuit SPST-NO Rating 0.05A (1A)@ 20VDC (250VAC) Rated pressure 1.2 Mpa (12kgf/cm2) Working Temperature 40T110 (-40 to 110℃) Mechanical Life 20E4 (200000 cycles Min.) Electrical Life 10E4 (100000 cycles Min.) Protection Level IP54 Standard Error ±0.001 MPa

Minimum Order: 10 long tons

Negative Air Pressure Sensor C7 negative air pressure sensor can simultaneously measure many water board levels and any position in a specific pressure range. It can contact a digital monitor to show the pressure value, and the signal output is done through the L/C oscillation principle to convert it into a square wave signal. The pressure sensor is the perfect updated vision of the pressure switch, which has a longer service life and more water level detection. So, the negative air pressure sensor will be used for the gas water heater and boiler and the large ventilation heating air control system. Generally, the detect pressure range is from 20 Pa to 80 Pa, which is the low-pressure type but as a pressure sensor company; we accept the OEM service. Welcome to discuss the customized project with us. Meanwhile, whether the pressure sensor or the pressure switch also has a negative and positive type, please send an inquiry to us to know more. All in all, Regal pressure and sensor products are high quality and reliable with fast delivery time. Differential Negative Air Pressure Sensor Specification Model Number C7 Working Medium Air or Gas tail gas Withstand Pressure 2000Pa Max. (Pa to Psi) Sensor Accuracy ±2%(Hz) Dielectric Strength 500VAC (<3mA) Rated Voltage DC4.75V – DC5.25V Rated Current 5mA Low-Duty-Cycle 50% Working Temperature 40T90 (-40 to 90℃)

Minimum Order: 10 long tons

C5 Air Pressure Switch Boiler Sensor Function The gas water heater’s air pressure switch (which is actually the air pressure sensor), usually located in the upper right corner of the water heater, is a disc-shaped object about the size of a teacup lid, connected by three wires, and a hollow plastic tube. The air pressure sensor works roughly like this The water-gas linkage device of the gas water heater is started by the water flow after the hot water bridle is opened. The physical displacement drives the micro switch, opens the solenoid valve to supply gas, and triggers the ignition circuit. At the same time, the micro switch also starts the strong exhaust fan, which starts the forced exhaust system, the strong exhaust fan has a bypass, through a small plastic pipe, to provide air pressure to the wind pressure sensor, the wind pressure sensor built-in film, one side is subject to wind pressure (air pressure), the sensor signal is continuously and stably provided to the ignition control loop, once the sensor signal is interrupted, The machine logic automatically cuts off the ignition circuit and closes the air valve. Eventually, it will cause the water heater to passively stop working. Air Pressure Switch Boiler Sensor 5mA 5VDC (1116) Please the link to learn about other sensor-related products Main parameters of the Air Pressure Switch Boiler (1) Linearity: Air Pressure Switch Boiler refers to the degree to which the actual relation curve between sensor output and input deviates from the fitting line. Defined as the ratio of the maximum deviation between the actual characteristic curve and the fitted line in the full-scale range to the output value of the full scale. (2) Sensitivity: Sensitivity is an important indicator of the static characteristics of the sensor. It is defined as the ratio of an increment in an output quantity to the corresponding increment in an input quantity that causes the increment. The sensitivity is indicated by S. (3) Hysteresis: When the input quantity of the sensor changes from small to large (positive stroke) and the input quantity changes from large to small (reverse stroke), the input-output characteristic curve does not coincide, which becomes hysteresis. For the same size of the input signal, the positive and negative stroke of the sensor output signal size is not equal, this difference is called the hysteresis value. (4) Repeatability: Repeatability refers to the degree of inconsistency of the characteristic curve obtained when the input of the sensor changes continuously in the full range in the same direction. (5) Drift: the drift of the sensor refers to the output of the sensor changes with time when the input is unchanged, and the second phenomenon is called drift. There are two reasons for the drift: one is the structural parameters of the sensor itself; Second, the surrounding environment (such as temperature, humidity, etc.). C5 Air Pressure Switch Boiler Specification Model Number C5 without wire & connector Working Medium Air or Gas tail gas Withstand Pressure 2000Pa Max. (Pa to Psi) Sensor Accuracy ±2%(Hz) Dielectric Strength 500VAC (<3mA) Rated Voltage DC4.75V – DC5.25V Rated Current 5mA Low-Duty-Cycle 50% Working Temperature 40T90 (-40 to 90℃)

Minimum Order: 10 long tons

TACT SW TS900VH series Water-Proof 6.0X6.0 mm Tact switch, Vertical, DIP Specification: similar to DTSMW-6/ DTSJW-6/ DTSJW2-6/ SKQBARA010/ SKQBASA010/ SKQBAPA010/ SKQBAJA010/ SKQBAQA010/ SKQBAMA010 Discover Champway's waterproof tact switches, ideal for consumer electronics, cloud devices, and the automotive industry. Our switches are engineered to provide reliable performance in challenging environments. From mobile phones and digital cameras to tablets and laptops, our waterproof tact switches ensure smooth operation, even in wet conditions. Trust Champway for durable and water-resistant solutions.

DIP SW DSVH series dip switch, Through hole type, Vertical 01/ 02/ 03/ 04/ 05/ 06/ 07/ 08/ 09/ 10/ 12 poles Champway is your trusted source for superior vertical DIP switches. With a focus on consumer electronics products like mobile phones, digital cameras, tablets, and laptops, we offer innovative and reliable solutions that cater to a wide range of applications.

6X6 mm LED Tact switch, Through Hole, Vertical, Single or Bi-color Champway specializes in illuminated switches for consumer electronics, cloud devices, and the automotive industry. Our illuminated switches are designed to enhance user experience and offer seamless integration into various applications. With our commitment to quality, reliability, and innovation, Champway ensures that your products stand out in the market. Explore our wide range of illuminated switches that cater to mobile phones, digital cameras, tablets, laptops, and more. Trust Champway for cutting- edge solutions that illuminate your devices.

The KYN61-40.5 switchgear is a three-phase single switchgear designed for power generation plants, substations, industrial and mining enterprises, and high- rise building distribution systems. The switchgear receives and distributes electrical energy while controlling, protecting, and monitoring electrical circuits. It meets the requirements of IEC60298, DL404, and other standards and has complete "five-proof" functions. The switchgear can operate in ambient air temperatures between -10℃ to +40℃, at an altitude not exceeding 1000m, and with a seismic intensity not exceeding 8 degrees. The ambient air should not be subject to significant pollution such as corrosive, flammable gases, water vapor, etc. The KYN61-40.5 switchgear features a compact cabinet structure due to the use of heat shrinkable insulation materials, epoxy-coated insulation technology, and optimized electrode shape. The switchgear cabinet body is made of high- quality cold-rolled steel. The switchgear can use both domestic ZN85-40.5 vacuum circuit breakers and French SF1, SF2, and FP system sulfur hexafluoride circuit breakers. The main busbar scheme can reach more than 198 types, providing strong adaptability to different user needs. Each functional compartment of the switchgear is sealed with a metal plate and has an independent pressure release channel. The mechanical interlocking device between the handcart, circuit breaker, grounding switch, and rear cabinet door prevents misoperation, and the "five-proof" functions ensure complete safety and reliability.

Leakage Protection Socket Introducing the ATR series Wiring Socket with Leakage Protection. The ATR series is designed to enhance electrical safety by incorporating leakage protection into a convenient and reliable wiring socket. With a rated current of 15A and a 2P+E configuration, this wiring socket is suitable for various electrical applications, providing both power and protection. Operating at a voltage of 125VAC, the ATR series ensures efficient electrical connectivity with its 1Φ2W wiring configuration. The leakage protection feature, with a sensitivity of 15mA, helps detect and address potential electrical faults promptly. With a non-operation current set at 7.5mA, the socket prevents unnecessary tripping and ensures stability in electrical systems. The ATR series boasts a quick trip time of 0.1 seconds or less, enabling rapid response to faults for enhanced safety. Additionally, it offers a short-time current rating of 1A, ensuring reliable performance even during short-duration electrical surges. The wiring socket is equipped with load terminals compatible with 1.6 ~ 2.0mm conductors, ensuring secure and efficient connections. With its compact dimensions and a weight of 290g, the ATR series Wiring Socket with Leakage Protection offers convenience and ease of installation. Choose the ATR series for efficient and secure electrical connections, providing peace of mind in any application.

The ATS Household Type Digital Power Automatic Switch, with its compact design and advanced features, is an essential device for every home. This automatic switch provides reliable and efficient power control, ensuring the safety of your electrical appliances and preventing any potential hazards. With a framework capacity of up to 20A, the ATS switch is capable of handling a wide range of electrical loads. It offers multiple options for rated currents, including 6A, 10A, 15A, and 20A, allowing you to choose the most suitable option for your specific needs. The switch operates on a voltage range of 100V-240V, providing compatibility with various power supply systems. Equipped with two poles and a single-phase, two-wire configuration, the ATS switch ensures efficient power distribution and reliable performance. Its compact dimensions make it easy to install in any electrical circuit. The switch is designed to deliver seamless and automatic power control, allowing for hassle-free operation. One of the key features of the ATS switch is its digital power monitoring capability. It constantly monitors the power consumption and ensures efficient energy usage. The switch is equipped with a trip time of less than 0.1 second, providing instant protection against overloads and short circuits.

easy install contactless sensor suface mount IR sensor switch (door trigger ) DC12V ,36W for DC12V led cabinet light led strip Features: 100% brand new ! This IR sensor switch (door trigger ) gives you the best solution to turn on /off of led lights when here has a door ,smart solution. Effect :Just open the door, the light turns on , close the door ,the light turns off . Applied for LED lighting,and many other electronic devices that has dupont port.DC12V It provides a simple solution for power connectivity, safe & reliable. Specifications: Material: PVC Color: white Voltage Range: DC12V Max Current: 5A Connectors:Dupont port Cable Length: 1500mm Package included: 1 x IR sensor switch door trigger sensor

Minimum Order: 10 long tons

easy install contactless sensor suface mount IR sensor switch (door trigger ) DC12V ,36W for DC12V led cabinet light led strip Features: 100% brand new ! This IR sensor switch (door trigger ) gives you the best solution to turn on /off of led lights when here has a door ,smart solution. Effect :Just open the door, the light turns on , close the door ,the light turns off . Applied for LED lighting,and many other electronic devices that has dupont port.DC12V It provides a simple solution for power connectivity, safe & reliable. Specifications: Material: PVC Color: white Voltage Range: DC12V Max Current: 5A Connectors:Dupont port Cable Length: 1500mm Package included: 1 x IR sensor switch door trigger sensor

Minimum Order: 10 long tons

easy install contactless sensor suface mount IR sensor switch (door trigger ) DC12V ,36W for DC12V led cabinet light led strip Features: 100% brand new ! This IR sensor switch (door trigger ) gives you the best solution to turn on /off of led lights when here has a door ,smart solution. Effect :Just open the door, the light turns on , close the door ,the light turns off . Applied for LED lighting,and many other electronic devices that has dupont port.DC12V It provides a simple solution for power connectivity, safe & reliable. Specifications: Material: PVC Color: white Voltage Range: DC12V Max Current: 5A Connectors:Dupont port Cable Length: 1500mm Package included: 1 x IR sensor switch door trigger sensor

Minimum Order: 10 long tons