Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Rubber Products


Home > Offers to Sell > Chemicals & Plastics > Rubber Products

Browse leads by category:
Agriculture Rubber    
    
  
 

Summary of 6/14/25 20:12 GMT:>> Show Compact View
1/29/21 2:28 GMT
NBR Rubber Sheet, NBR Sheeting, NBR Rolls

NBR Rubber Sheet, NBR Sheeting, NBR Rolls Description: the NBR rubber sheet, nitrile rubber sheet are made by drum vulcanizer(ROTOCURE) or plate vulcanizer with high quality nitrile butadiene rubber, nitrile rubber known as NBR, Buna-N and acrylonitrile butadiene rubber is a synthetic rubber copolymer elastomer. NBR rubber are widely use in automotive and aeronautical industry to make fuel and oil seals, self-sealing fuel tanks lining. NBR ability to withstand range of temperatures from -30 to +110°C make it an ideal material for aeronautical applications. NBR rubber sheet is a nitrile base rubber sheet, providing excellent resistance to petroleum oils as well as mineral and vegetable oils. NBR rubber material is used in applications involving not only oil and fuel resistance but also those applications requiring resistance to heat, abrasion, water and gas permeability. It is resistant to weathering, sunlight and ozone. From oil rigs to bowling alleys, nitrile rubber can be the right material for your applications under excellent oil resistant, good resistance to heat and aging, good impermeability to gases, good abrasion resistance. The NBR rubber sheet is under middling hardness and high tensile strength, excellent performance of fuel oil resistance, lubricating oil resistant, safety and nontoxicity without smell. 0.5-10mm thickness made by drum vulcanizer(ROTOCURE) with shiny surface, 12-100mm thickness made by plate vulcanizer for higher thickness. Mainly working in the lubricating oil, transformer oil, gasoline at the temperature of -30°C - +100°C. Apply to punch all kinds of seals, gaskets, carburetor and fuel pump diaphragms, chemical container lining, aircraft hoses or other shapes and cover on the mechanical equipments with excellent oil resistant, good resistance to heat and aging, good impermeability to gases, good abrasion resistance, white NBR rubber sheet can be used for food grade applications. Specifications: material: virgin NBR Rubber or NBR/SBR quality: industrial grade, food grade color: black, white, red, grey etc. surface: smooth/smooth, smooth/impression fabric, double impression fabric Insertion: reinforce and insert 1-3PLY cotton, polyester, EP fabric or wire mesh SS201, SS304, SS316 tensile strength: 4-16Mpa hardness: 40, 50, 60, 70, 80+/-5shore A elongation: 250%-380% density: 1.20-1.40g/cm3 working temperature: -30°C - +100°C thickness: 0.5-100.0mm width: 0.1-3.6m length: 0.1-20m OEM & customized size are agreed packing in rolls and pallets Insulation sponge rubber sheet: Insulation sponge rubber sheet is made by rubber-plastic sponge material which has low thermal conductivity, full-closed structure, and excellent continuous heat insulation. The material is completely isolated with vapor, so it has the properties of water-proof, anti-condensation and long lifetime. After SGS testing, its measured value is much lower than EU standard value on materials without toxic substances, so it is safe and healthy. Moreover, with beautiful appearance, it is easy for bending and construction, and no need of other accessories. Distinctive advantages: • Closed structure can effectively prevent thermal conduction. • Thermal conductivity 0.034W/m•k while 0°C. • High heat emission coefficient of surface, up to 9W/m2k • Excellent anti-steam permeated ability; moisture resistance 5000; "built-in" steam-proof coating; the insulation board is insulating layer and moisture- proof coating as well. • Excellent fireproofing; oxygen index is above 32. • Easy for installation. • No CFC, HFC, HCFC or other materials containing fluorine, also no formaldehyde, dust or fiber The rubber plastic insulation board has excellent fireproof performance. According to international GB/T17794-1999(Division Methods of construction material burning performance), it meet to Chinese standard GB/T17794-1999 Grade "B1" difficult-flammable material after testing, and working temperature is from -50°C to +110°C. Application areas: • Refrigeration unit and equipment for air-conditioning system • Frozen water pipe • Condensing water pipe • Air duct and hot water pipeline Specifications: material: NBR+plastic foam quality: B1, B2 grade color: black cell: close cell surface: smooth density: 40-45kgs/m3 standard size: 6mm x 1m x 10m 8mm x 1m x 10m 10mm x 1m x 20m 13mm x 1m x 20m 15mm x 1m x 20m 18mm x 1m x 10m 20mm x 1m x 10m 25mm x 1m x 10m 30mm x 1m x 10m OEM & customized size are agreed packing in rolls, pallets and crates ***when you enquiry, pls confirm the tensile strength, hardness, color, size and quantity***

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Shiguo Han
86 316 5165102
86 316 3216681
Send Inquiry
SANHE 3A RUBBER & PLASTIC CO.,LTD.
45 Hualian Golden Street,
Sanhe 065201
China
1/29/21 2:26 GMT
Neoprene Rubber Sheet, Neoprene Sheeting, Neoprene Rolls

Neoprene Rubber Sheet, Neoprene Sheeting, Neoprene Rolls Description: the neoprene rubber sheet, neoprene lining are made by drum vulcanizer(ROTOCURE) or plate vulcanizer with high quality neoprene rubber.The neoprene rubber, chloroprene(CR) is the common name for the organic compound, this synthetic rubber sheet is better known to the public as neoprene. It exhibits good chemical stability and maintains flexibility over a wide temperature range, resistance of degradation is better than natural rubber sheet or any other synthetic rubber sheet. This make is very suitable for demanding application such as gaskets, hoses, corrosion resistant lining. It is resists to burning better than other synthetic hydrocarbon based rubbers. Resulting in it appearance in weather stripping for fire doors, electrical control box and transformer. Neoprene rubber is used as load bearing base in civil engineering especially for bridge construction. Neoprene rubber sheet is an all purposes elastomer with an extremely versatile synthetic rubber used in every industries applications. Neoprene rubber excellent on resists to degradation from sun, ozone and weather, performs well in contact with oils and chemicals. Neoprene rubber maintains its strength, flexibility, twisting and elongation very well over a wide temperature range while having outstanding physical toughness. The neoprene rubber sheet is under middling hardness and high tensile strength, excellent performance of acid and alkali-resistance, ozone-resistant, ageing-resistant, chemical corrosion resistant, seawater- resistant without smell. 0.5-10mm thickness made by drum vulcanizer(ROTOCURE) with shiny surface, 12-100mm thickness made by plate vulcanizer for higher thickness. Working in the liquid which contain 20% acid or alkali at the temperature of -30°C - +120°C. Apply for all kinds of seals, gaskets, chemical container lining or others on the mechanical equipments. Specifications: , material: virgin neoprene rubber or CR/SBR quality: premium grade, industrial grade, commercial grade color: black, white, red, grey etc. surface: smooth/smooth, smooth/impression fabric, double impression fabric Insertion: reinforce and insert 1-3PLY cotton, polyester, EP fabric or wire mesh SS201, SS304, SS316 tensile strength: 4-16Mpa hardness: 40, 50, 60, 70, 80+/-5shore A elongation: 250%-380% density: 1.40-1.55g/cm3 working temperature: -30°C - +120°C thickness: 0.5-100.0mm width: 0.1-3.6m length: 0.1-20m OEM & customized size are agreed packing in rolls and pallets neoprene lining: top: cured neoprene rubber with black bottom: uncured neoprene rubber with light yellow quality: industrial grade surface: smooth/smooth tensile strength: 9Mpa hardness: 65+/-5shore A elongation: 400% density: 1.5g/cm3 working temperature: -35°C - +120°C thickness: 1.0-25.4mm width: 1-1.5m length: 10-20m OEM & customized size are agreed packing in rolls and pallets ***when you enquiry, pls confirm the tensile strength, hardness, color, size and quantity***

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Shiguo Han
86 316 5165102
86 316 3216681
Send Inquiry
SANHE 3A RUBBER & PLASTIC CO.,LTD.
45 Hualian Golden Street,
Sanhe 065201
China
1/29/21 2:24 GMT
SBR rubber sheet, SBR sheeting, SBR rolls

SBR rubber sheet, SBR sheeting, SBR rolls Description: the SBR rubber sheet, SBR rubber roll are made by drum vulcanizer(ROTOCURE) or plate vulcanizer with high quality Styrene Butadiene Rubber material(SBR, one of synthetic rubber), with middling hardness and high tensile strength and high abrasion resistance without smell. 0.5-10mm thickness made by drum vulcanizer(ROTOCURE) with shiny surface, 12-100mm thickness made by plate vulcanizer for get higher thickness. Working under the higher pressure status at the temperature of -35°C - +100°C in air and water. Apply to punch all kinds of seals and gaskets and others which is high abrasion resistance, anti-impact and high cushion performance. Specifications: material: virgin SBR Rubber or reclaimed SBR quality: industrial grade color: black, white, red, grey etc. surface: smooth/smooth, smooth/impression fabric, double impression fabric Insertion: reinforce and insert 1-3PLY cotton, polyester, EP fabric or wire mesh SS201, SS304, SS316 tensile strength: 2-12Mpa hardness: 40, 50, 60, 70, 80+/-5shore A elongation: 170%-380% density: 1.25-1.70g/cm3 working temperature: -35°C - +100°C thickness: 0.5-100.0mm width: 0.1-3.6m length: 1.0-20m OEM & customized size are agreed packing in rolls and pallets

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Shiguo Han
86 316 5165102
86 316 3216681
Send Inquiry
SANHE 3A RUBBER & PLASTIC CO.,LTD.
45 Hualian Golden Street,
Sanhe 065201
China
1/29/21 2:22 GMT
natural rubber sheet, para rubber sheet, latex sheet

natural rubber sheet, para rubber sheet, latex sheet Description: the natural rubber sheet, gum rubber sheet are made by ROTOCURE drum vulcanizer or press vulcanizer with high quality natural rubber(NR). The natural rubber is from the natural rubber tree or clover who one is high wear resistant rubber further enhanced physical property of natural rubber for abrasion resistant, this high abrasion rubber sheet are excellent used in applications where excessive cuts, abrasion or wear & tear occur. Great impact resistance that used as cushioning resistance in matting applications. It’s food grade rubber lining for drink water specially designed for applications where high abrasion resistance is required, compounded from premium natural rubber for better abrasion, impact and corrosion resistance. Pure natural rubber exhibits high strength, elasticity, excellent cut and tear resistance, resulting in outstanding performance in heavy wear and abrasion environments like the mining & quarry industries. The natural rubber sheet is under middling hardness and high tensile strength, high elongation, good abrasion resistance, elasticity, safety and non-toxicity without smell. The pure natural rubber sheet is also named gum rubber sheet or para rubber sheet. 0.5-10mm thickness made by ROTOCURE drum vulcanizer with shiny surface, 12-100mm thickness made by press vulcanizer for get higher thick thickness. Working under the higher pressure, wearing resistant, food grade lining status at the temperature of -35°C - +85°C in air or water. Apply to punch all kinds of seals, gaskets, printing, tank lining, slurry handling, pipe lining, pump liner, chute lining, valve liner, belting, hydrocyclones liner, skirt board, pulley cover and high quality rubber membrane special for wooden vacuum laminator to laminate PVC. Specifications: materia , l: pure natural rubber or NR/SBR quality: industrial grade, food grade color: black, white, brown, beige, red, green etc. surface: smooth/smooth, smooth/impression fabric, double impression fabric Insertion: reinforce and insert 1-3PLY cotton, polyester, EP fabric or wire mesh SS201, SS304, SS316 tensile strength: 2-24Mpa hardness: 35, 40, 50, 60, 70, 80+/-5shore A elongation: 170%-760% density: 1.05-1.70g/cm3 working temperature: -35°C - +85°C thickness: 0.5-100.0mm width: 0.1-3.6m length: 1.0-20m OEM & customized size are agreed packing in rolls and pallets natural rubber lining sheet: top: cured natural rubber with red or black bottom: uncured neoprene rubber with light yellow quality: industrial grade, food grade surface: smooth/smooth tensile strength: 13-18Mpa hardness: 35, 40, 65+/-5shore A elongation: 400%-650% density: 1.05-1.15g/cm3 working temperature: -35°C - +85°C thickness: 1.0-25.4mm width: 1-1.5m length: 10-20m OEM & customized size are agreed packing in rolls and pallets special supply engarving rubber sheet apply for carton printing special supply latex rubber sheet, latex part and seal etc. ***when you enquiry, pls confirm the tensile strength, hardness, color, size and quantity***

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Shiguo Han
86 316 5165102
86 316 3216681
Send Inquiry
SANHE 3A RUBBER & PLASTIC CO.,LTD.
45 Hualian Golden Street,
Sanhe 065201
China
1/26/21 13:23 GMT
High Strength Ep Polyester Rubber Conveyor Belt PRODUCT DESCRIPTION

High Strength Ep Polyester Rubber Conveyor Belt PRODUCT DESCRIPTION Polyester conveyor belts,also called EP conveyor belts, whose tension resistant body is canvas woven by polyester in warp and nylon-66 in weft. The belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould, suitable for medium, long-distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the belts can choose a relative low safety factory High Strength Ep Polyester Rubber Conveyor Belt APPLICATION FIELDS Metallurgy, steel plant, building material and construction, energy, chemical, machinery equipment and port. TENSILE STRENGTH Tensile Strength: 500-3200 N/mm Width: 500-2400 mm FEATURES & BENEFITS 1, Reduced strength The combination of fabric design and dip process provide less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduce the number of splice at break-in. 2, High-modules, superior troughability characteristics. With the high-tension PET warp and NN66 fiber could provide the belt high-modules and superior troughability characteristics. 3, Variety choices of cover types and thickness. If you would like more information, please contact us.

Contact:
Phone:
Fax:
Email:
Tony Zhao
86-13400395677

Send Inquiry
Hebei Lanjian Rubber Belts Co., Ltd.
Daqi Rubber Industrial Zone, Boye County, Baoding, Hebei, China
Shijiazhuang 50000
China
1/26/21 13:21 GMT
Abrasion Resistant EP Fabric Conveyor Belt for Quarry PRODUCT DESCRIPTION

Abrasion Resistant EP Fabric Conveyor Belt for Quarry PRODUCT DESCRIPTION Polyester conveyor belts,also called EP conveyor belts, whose tension resistant body is canvas woven by polyester in warp and nylon-66 in weft. The belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould, suitable for medium, long-distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the belts can choose a relative low safety factory Abrasion Resistant EP Fabric Conveyor Belt for Quarry APPLICATION FIELDS Metallurgy, steel plant, building material and construction, energy, chemical, machinery equipment and port. TENSILE STRENGTH Tensile Strength: 500-3200 N/mm Width: 500-2400 mm FEATURES & BENEFITS 1, Reduced strength The combination of fabric design and dip process provide less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduce the number of splice at break-in. 2, High-modules, superior troughability characteristics. With the high-tension PET warp and NN66 fiber could provide the belt high-modules and superior troughability characteristics. 3, Variety choices of cover types and thickness. If you would like more information, please contact us.

Contact:
Phone:
Fax:
Email:
Tony Zhao
86-13400395677

Send Inquiry
Hebei Lanjian Rubber Belts Co., Ltd.
Daqi Rubber Industrial Zone, Boye County, Baoding, Hebei, China
Shijiazhuang 50000
China
1/26/21 13:19 GMT
EP200 Rubber Conveyor Belts for Gravel, Sand, Quarries Product Description

Polyester conveyor belts, also called EP conveyor belts, whose tension resistant body is canvas woven by polyester in warp and nylon-66 in weft. The belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould, suitable for medium, long-distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the belts can choose a relative low safety factory. Application Fields Metallurgy, steel plant, building material and construction, energy, chemical, machinery equipment and port. Tensile Strength Tensile Strength: 500-3200 N/mm Width: 500-2400 mm Features & Benefits 1, Reduced strength  The combination of fabric design and dip process provide less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduce the number of splice at break-in. 2, High-modules, superior troughability characteristics. With the high-tension PET warp and NN66 fiber could provide the belt high-modules and superior troughability characteristics. 3, Variety choices of cover types and thickness. If you would like more information, please contact us.

Contact:
Phone:
Fax:
Email:
Tony Zhao
86-13400395677

Send Inquiry
Hebei Lanjian Rubber Belts Co., Ltd.
Daqi Rubber Industrial Zone, Boye County, Baoding, Hebei, China
Shijiazhuang 50000
China
1/19/21 8:49 GMT
GLPOLY Thermally Conductive Adhesive Alternative To Lord TC2202

GLPOLY thermally conductive epoxy adhesive XK-D12 has a bonding strength of 13MPa and thermal conductivity of 1.2W/mK, comparable with TC2002, ranking the forefront of industry. Most of competitive products in the market are defective, some products provided satisfied thermal conductivity and bonding strength, but hardness failed to meet requirements; or thermal conductivity and hardness were escellent but bonding strength failed. But these never happened to GLPOLY, GLPOLY thermally conductive adhesive XK-D12 provided high performance, ultra strong bonding strength and proper hardness to fit mainstream design of battery cell bond. GLPOLY had the ceramic filler modified to improve thermal performance of thermally conductive adhesive, decreasing partilce size to enhance filling ratio and improve contact between particles. GLPOLY Thermally conductive adhesive verified by high temperature aging test in house and third party. GLPOLY imported automated production lines, monitoring entire processes for decreasing artificial error and keeping consistency of product. Earlier this year, a new energy electric vehicle manufacturer contacted me and inquired about thermal interface material for battery pack. He had a tough thermal management problem suspended due to previous samples’ failure to meet requirements. I sent him the specification of thermally conductive epoxy adhesive XK-D12H for evaluation. Two days later, he called me that his team had assessed the data sheet and found specification satisfied, so he wanted to apply for samples for testing at their facility. I said all samples were charged, but the cost could be shared in bulk production in the future. Customer accepted and bought five samples in 400ml cartridge each. Customer told me samples would be verified for six months for high temperature aging test and high and low temperature thermal shock, it really was unexpected because most the customers would verified samples for two months. Though we would spend more time, I appreciated customer’s rigorous and serious attitude. Then customer seemed to disappear in the next six months. I almost forgot this project. One day, I received a call from this customer, he said XK-D12H performed excellent no matter thermal performance, bonding strength or hardness, comparable with TC2202. In this case, customer decided to purchase XK-D12H instead of TC2202 due to lower cost and 7-day lead time. Now trial production was in progress and a bulk production schedule was proceeded. GLPOLY thermall conductive adhesive XK-D12H helps enhance volume availability by 15-20% and decrease numbers of components by40%, resulting in improving productivity by 50%, lowing down cost of battery pack. Also, this material verified by impact test that no burning took place when falling down at a height of 12m and an angle of 45 degrees. GLPOLY thermally conductive adhesive XK-D12H has the following advantages: 1. Bonding strength 8-13MPa, maybe it’s the only one in China; 2. Verified by in-house and third party; 3. Imported materials and automated production lines keep consistancy of product; GLPOLY has partnered with LG, dJI Innovation, NIO Automotive etc. top class customers, supplying thermal interface materials for them to keep their devices performing reliably and cooler.

Minimum Order: 10 long tons

Contact:
Phone:
Fax:
Email:
Lyn Gui
86-755-27579310
86-755-27579350
Send Inquiry
Goldlink Tongda Electroncis Co., Ltd
Rm619,Huafengxin'an building, Baoan
Shenzhen 518101
China
1/19/21 8:43 GMT
GLPOLY Thermal Gap Filler Keeps Automotive Electronics Cooling

GLPOLY thermal interface materials has been applied widely in multiple industries including consumer electronics, industrial control system, medical equipment, solar, automotive electronics, new energy electric vehicle battery cooling system and more, especially to the automotive electronics. GLPOLY has been engaging in sector of thermal interface materials for more than 12 years, establishing great brand reputation. Thermal gap filler XK-S20, for example, has been applying to automotive electronics in high volume already. An top rank automotive electronics manufacturer in Hangzhou had partnered with GLPOLY for five years, the volume delivered was more than 10 tons per year. Before partnership was established, this customer had verified thermal gap filler XK-S20 for one year including high temperature aging test, high and low temperature thermal shock and 85 centigrade&RH85% test. Now we are the exclusive supplier for thermal gap filler. Another partner, a pump manufacturer from Guangdong, they had thermal gap filler XK-P20 tested for 2000hrs at 150 centigrade, comparing with Bergquist Gap Filler 1500 and Sekisui CGW-2, GLPOLY XK-S20 emerged as a preferred solution. We have been premium supplier for four consecutive years. GLPOLY thermal gap filler provides advantages: 1. Thermal conductivity 1.0~4.0W/mK; 2. Automated production lines, eliminating artificial error; 3. Low stress on component, reworkable, easy to remove after curing; 4. Comparable with world-class brands; 5. Particle size 1um improves filling ratio, 20% higher than competitive products; It’s not a whim that so many customers selected GLPOLY, but repeated siftings. I recalled that the customer from Hangzhou collected samples from nine suppliers for comparing, domestic and foreign competitors, but GLPOLY emerged as the best one, 10-year service life verification had been recognized by customers. GLPOLY has collaborated with top class brands such as dJI, LG, Freetech Pilot, Skyworth and NIO automotive etc., delivering technological solution backing by superior service.

Minimum Order: 10 long tons

Contact:
Phone:
Fax:
Email:
Lyn Gui
86-755-27579310
86-755-27579350
Send Inquiry
Goldlink Tongda Electroncis Co., Ltd
Rm619,Huafengxin'an building, Baoan
Shenzhen 518101
China
1/4/21 3:34 GMT
Stretch Technology

SUNGOD, as one of the PTFE membrane manufacturers, has recently developed new products based on Stretch Technology. It combines the synthetic stretch fabrics with bi component based on expanded PTFE porous membrane and through special lamination processing forming the laminated fabric with stretch technology, offering basically high breathability and waterproofness, but also high stretch and recoverable property. The porous membrane is welcomed by many manufacturers and customers as well. It is suggested to be used at the joint part like shoulder, oxter, elbow. It allows the wearer to act more comfortably and flexibly, which effectively helps the wearer maintain passion and concentration for work, mission, or sports.

Contact:
Phone:
Fax:
Email:
sungodtech
021-6768-1918
021-6768-1918
Send Inquiry
SUNGOD Technology Co., Ltd.
Bldg. 2, No. 899 Jindu West Road, Songjiang, Shanghai, 201612 China
Shanghai 201612
China
1/4/21 3:33 GMT
Professional Garments with PTFE Membrane

As a ptfe membrane supplier, SUNGOD PTFE membrane contains millions of micropore which are smaller than water molecular but bigger than water vapor size. Therefore, it allows body vapors to pass through while protecting the wearer against the wind, rain, snow, and freezing temperatures. And it remains its superior characteristics even after repeated washings. Besides, it is anti static film which is lightweight and flexible. This great combination leads to a variety of applications. Features and Benefits Our products allow you to enjoy work and life better and provide you with a variety of models to choose from, to provide you with professional protection. Garments with our PTFE membrane are much lightweight and breathable than traditional, it does not only offer liquid penetration resistance, high breathability, reducing heat-press, but also great abrasion & tear resistance which provides whole day reliable protection for workers working either indoor or outdoor. Durable Waterproof membrane Oil Contamination Liquid Chemical / Hazardous Substances Protection High Breathable

Contact:
Phone:
Fax:
Email:
sungodtech
021-6768-1918
021-6768-1918
Send Inquiry
SUNGOD Technology Co., Ltd.
Bldg. 2, No. 899 Jindu West Road, Songjiang, Shanghai, 201612 China
Shanghai 201612
China
1/4/21 3:31 GMT
Windproof : MK Series Membrane

Due to the windproof, durability and breathability of MK series products, this kind of functional lamination can be used from sportswear to professional wearing and other situations. MK Series Windproof Membrane Provides Excellent Performance in Various Fields As one of the most trusted PTFE membrane suppliers in this industry, even in extremely low temperatures or high humidity environments, our MK series windproof membrane provides the wearer maximum comfort and warmness. It is usually laminated with fleece to prevent the wind-chill in windy and cold seasons. Key Properties of MK Series Windproof Membrane - Windproof - Warm keeping - Ultra-high breathability - Best wearing comfort - Flexible air permeability control Windproof Membrane Related Products

Contact:
Phone:
Fax:
Email:
sungodtech
021-6768-1918
021-6768-1918
Send Inquiry
SUNGOD Technology Co., Ltd.
Bldg. 2, No. 899 Jindu West Road, Songjiang, Shanghai, 201612 China
Shanghai 201612
China
1/4/21 3:30 GMT
PTFE Membrane

What is a PTFE Membrane? Polytetrafluoroethylene (PTFE) is a synthetic material that expands to form a microporous film (also called Teflon film/membrane) and can be laminated to functional fabrics. It has waterproof, windproof and heat-resistant properties which is used to produce waterproof breather membrane, and is ideal for firefighter clothing, sports, leisure clothing and military equipment material. As the expanded PTFE membrane manufacturer, the SunGod PTFE film (polytetrafluoroethylene film) which is produced by us is combined with a cross-linked polyurethane coating and penetrates into the PTFE structure. This improves the durability of the porous film. This means that after repeated washing, wearing, and using, you will still be protected by SunGod PTFE technology. SunGod is the worldwide first and only expanded entity as one of the PTFE membrane manufacturers licensed to use Chemours TeflonTM fluoroplastic logo. As one of the most professional polytetrafluoroethylene membrane manufacturers from China, SunGod has top quality PTFE membrane for sale. If you want to know our PTFE membrane price or other product information such as porous PTFE membrane, microporous PTFE and hydrophobic PTFE membrane, please contact us or leave a message through our website. Micro Porous Membrane Technology SunGod PTFE is built with 9 billion nanoscopic pores per square inches that work instantly to vent out sweat vapor which generates inside of your gear when you perform. The micro porous film is dry and comfort in the widest range of conditions, which results in a critical difference to traditional non-porous film solutions. The microporous hydrophobic direct vent dry system has your sweat vapor vent out without a multi-step process and free of wet feeling inside the skin. Sweat vapor diameter Pore diameter SunGod PTFE  membrane Water droplet diameter 0.4nm 100-500nm 0.9mm-10mm Or 0.0004µm Or 0.1-0.5µm Or 900-10,000µm            Advanced Pore Size Measurement of Micro Porous Membrane Sophisticated PMI pore size measurement system. Maintaining pore size evenness and performance conformity. High-tech Membrane Consolidating Treatment With multi-layer treatment, we make the polytetrafluoroethylene membrane more versatile with higher performance and wider application. Durability: BK series membrane has high waterproof after cycle washing. Anti-Abrasion: Over 50,000 cycles Martindale abrasion sustainability. Flame Retardant. Anti-Static. Colored. Oil Repellent. Medical Virus Protection. Explore Our PTFE Membrane / eptfe film Products Windproof : MK Series Membrane MK series products is with great windproof property and it is the best membrane teflon series. Due to the water resistance, durability and breathability of MK series windproof membrane, it can be used from sportswear to professional wearing and other situations. It is usually laminated with fleece to prevent the wind. Down Feather : MK-1 Series Membrane MK-1 series product with great windproof property and also excellent breathability. Even in extremely low temperature or high humidity environment, providing the wearer maximum comfort and warmness. Durable : BK Series Membrane Our BK series of PTFE membranes are known for their long-lasting durability. It can be continuously washed for 200 hours. With special surface treatment enhancing mechanical strength and delivering durable water resistance which also come with high breathability, it meets severe specs for extreme conditions of multifunctional garments, including professional outdoor like mountain wear, biking, hunting, fishing, etc. Flame Retardant : BK-F Series Membrane Our BK-F products protect you from harm in the dangerous environment. All our products for structural fire protection comply with international standards and are highly durable. Medical : BK-M Series Membrane When BK-M series membrane, a kind of breathable insulation membrane, is anti- bacteria and reliable for WDA 80-125 cycles, stops bacteria from pouring in and keeps you safe. Footwear : S Series Membrane Innovative S09 series products have been applied to all kinds of hiking boots. This series is the best breathable membrane and breathable membrane series. Shoes made of waterproof and membrane breathable materials, can accompany you to enjoy all the moments of life.

Contact:
Phone:
Fax:
Email:
sungodtech
021-6768-1918
021-6768-1918
Send Inquiry
SUNGOD Technology Co., Ltd.
Bldg. 2, No. 899 Jindu West Road, Songjiang, Shanghai, 201612 China
Shanghai 201612
China
1/4/21 3:28 GMT
Outdoor Garments with PTFE Membrane

Lightweight, windproof, durably waterproof and extremely breathable:  As one of the PTFE membrane manufacturers, our outdoor waterproofing membrane can make rain simply bead up and run right off the surface of the jacket to keep you dry, allowing you to perform at the highest level in all weather conditions. Our breathable waterproof material products are the ideal choice for outdoor gear, no matter you are on the snowing mountain or raining forest, the waterproof material fabric provides extraordinary breathability and durable waterproof property, keeping wearer extreme comfort and protection from head to toe.                 Features and Benefits Compared with popular PU non-porous membrane in the market, unique PTFE lamination allows sweat vapor out much easier, keeping dry inside.  Besides, SONGOD PTFE membrane is aging resistant which guarantees its durable and long-lasting reliability for wearing. And it is extreme temperature resistant, even in severe cold polar region, SUNGOD PTFE cannot be cracked and still keep its superior breathability and waterproof property.

Contact:
Phone:
Fax:
Email:
sungodtech
021-6768-1918
021-6768-1918
Send Inquiry
SUNGOD Technology Co., Ltd.
Bldg. 2, No. 899 Jindu West Road, Songjiang, Shanghai, 201612 China
Shanghai 201612
China
1/4/21 3:26 GMT
Technical Lamination

As one of the PTFE membrane manufacturers, SUNGOD produces membrane lamination with advanced lamination technology in Asia. It established PTFE lamination dept almost the same time as the PTFE membrane dept. Till 2020, we have nearly 20 years' lamination history, as well as 20 years' experience in tender uniforms and outdoor sportswear requirements. We provide both package PTFE laminated fabric and contract lamination services with 4 lines of customized gravure dot eco-friendly hot melt lamination systems. SUNGOD works with top tier fabric suppliers in US/Japan/Korea/China/Taiwan to ensure excellent PTFE matching excellent fabrics to provide quality laminate products with high-end membrane lamination technology for end-users. And each lot of laminates are inspected and tested in our own lab before shipping to customers. /product/ptfe-membrane//prod , uct/ptfe-membrane/Laminate Various Kinds of functional textiles Substrates with PTFE Laminate We laminate various kinds of textile substrates: Woven (with DWR): oxford, taffeta ripstop, pongee, taslon, cordura, supplex. Aramid/anti static, modacrylic/cotton, etc. Knit: interlock, fleece, flannel, tricot, mesh, etc. Nonwoven: 70/30 or 80/20 aramid felt, PET nonwoven, etc. And different moisture barriers: ePTFE microporous membrane Bi-component based on ePTFE membrane PU microporous film PU hydrophilic film Excellent Performances of Membrane Lamination With the advantage of producing PTFE on our own, we can customize membrane to meet specific stringent technical requirements for specific applications. Generally, the laminates offer excellent performances such as: Durable waterproof & windproof Maximum comfort based on excellent breathability Durable water and oil repellent Washing resistant to home laundering AATCC135/ISO 6330 or even industrial wash ISO 15797 Dry clean resistant Oil contamination resistant (Gasoline, Diesel) DEET insect liquid resistant Flexing/cold flexing resistant Aging/hydrolysis resistant Chemical splash resistant Virus & bacterial resistant Supple touch Good color uniformity Good color fastness We Provide Different Types of Seam Tape Matching Our Laminates. Furthermore, SUNGOD offers a range of tailor-made seam sealing tapes matching our laminates, either 2 layer or 3 layer for different applications (including most challenging FR and medical uses). Width ranges from 15mm to 150mm.               Explore Our Membrane Lamination Technology

Contact:
Phone:
Fax:
Email:
sungodtech
021-6768-1918
021-6768-1918
Send Inquiry
SUNGOD Technology Co., Ltd.
Bldg. 2, No. 899 Jindu West Road, Songjiang, Shanghai, 201612 China
Shanghai 201612
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   10  |   11  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2025 IMEXBB.com. All rights reserved.

IMEXBB.com