Recycling Machinery

Introduction of used engine oil distillation plant: Vacuum Pressure Distillation，is the new technology which can refine waste engine oil into diesel or base oil. The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type” vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually. Waste engien Oil Distillation Process ● The oil pump pumps the waste engine oil into the distillation reactor by oil pump. ● The reactor will be heated by fuel oil, LPG, natural gas, wood or coal, etc and when the temperature reaches to a certain degree, the oil will be boiling and oil steam will be produced. ● The oil steam will be generated and be purified in the distillation tower. ● Purified oil steam will flow to the condensers and get liquefied through them and stored in the product oil tanks.

Working process of waste tire pyrolysis plant: 1. FEEDING (2 HOURS) : Load tires/rubbers into the reactor by automatic hydraulic feeder, after loading all, seal the feeding door.  2. HEATING ( 8~10 HOURS): Start the Waste Rubber Pyrolysis Plant and the reactor will be rotating and heated by fuel. When the temperature reaches the degree of 250 to 280, the oil steam will be continuous produced until the temperature reaches 350-480 C. Oil steam will flow through oil gas separator, light component will enter the condensers and liquified as fuel oil, meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as fuel oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material. 4. COOLING(4~5HOURS): After the oil producing  process is completed, leave the plant for cooling and waiting for discharge. 5. DISCHARGING(2 HOURS):  Discharge the carbon black automatically and pull out the steel wire finally. Features of Pyrolysis Process Safety: 1. Anti-explosion control: During the pyrolysis process, combustible gas will be generated as fuel gas  for pyrolysis system heating usage. The combustible gas will be filtered through the anti-flashback water seal to  prevent combustible gas from flashing back  to the oil tank and then enter the furnace to be recycled , causing combustion or explosion. 2. Emission Control: 2-phase scrubbers and activated carbon filters to prevent pyrolysis process from releasing  pollutants.  3. PLC control : All motors and gauges of  the equipment are connected to PLC, which can realize mechanical and electronic control. The control cabinet is equipped with an alarm system. When the temperature, pressure, or mechanical abnormalities occur during the operation of the equipment, the control cabinet will automatically alarm.

Oil sludge is a complex physico-chemical mixture, consisting of three distinct fractions: water, oil and solid (metals, salts, sand, etc.). As most promising of the presented methods of utilization of oil sludge is pyrolysis, it can refine oil sludge by thermal cracking process which compared with the other methods have a number of significant advantages. Oil sludge (OS) is a common waste in oil field mining, oil transportation, fining, storage and other oil related process which consisting of three distinct fractions: water, oil and solid (metals, salts, sand, etc.).  OS can cause great damage to the environment and threaten human's health if not treated properly. During the drilling process, the oil-containing silt，which brought from replacing the well-drilling and extracting the drive pipe, will be left around the well site. The oil-containing silt that is covered with various sands and sundries, etc., will be piled up more and more before the site is cleaned up or the oily sludge is temporarily piled up for a period of time. The oily sludge comes from the deep drilling strata, and contains a large number of benzene series, phenols, anthracene, pyrene and other odorous toxic substances. It will not only damage the soil or pollute the environment, but also cause the waste of resources if not treated well. Features of Pyrolysis Process Safety: 1. Anti-explosion control: During the pyrolysis process, combustible gas will be generated as fuel gas  for pyrolysis system heating usage. The combustible gas will be filtered through the anti-flashback water seal to  prevent combustible gas from flashing back  to the oil tank and then enter the furnace to be recycled , causing combustion or explosion. 2. Emission Control: 2-phase scrubbers and activated carbon filters to prevent pyrolysis process from releasing  pollutants.  3. PLC control : All motors and gauges of  the Oil Sludge Treatment Pyrolysis Plant are connected to PLC, which can realize mechanical and electronic control. The control cabinet is equipped with an alarm system. When the temperature, pressure, or mechanical abnormalities occur during the operation of the equipment, the control cabinet will automatically alarm. https://www.sihaienergytech.com/

Pyrolysis is one of the most promising chemical recycling technologies for plastic recycling , which has the capability to handle also more challenging waste plastic streams. In pyrolysis, the degradation of organic materials takes place under the effect of heat and in the absence of oxygen. Recycling Of Various Waste Plastics: With the development of global industry, the amount of plastic waste in the world has reached a level that threatens the ecology. Landfills are piled up like mountains, and marine plastic waste destroys the ecology. In order to deal with these difficult-to-decompose wastes, plastic pyrolysis oil plants have become an efficient solution, which not only solves the pollution problem, but also turns waste plastics into fuel energy. Features of Pyrolysis Process Safety: 1. Anti-explosion control: During the pyrolysis process, combustible gas will be generated as fuel gas  for pyrolysis system heating usage. The combustible gas will be filtered through the anti-flashback water seal to  prevent combustible gas from flashing back  to the oil tank and then enter the furnace to be recycled , causing combustion or explosion. 2. Emission Control:  The exhaust gas generated during heating the reactor will be purified and cooled down in 2 scrubbers(1 water pond type scrubber and 1 water spray, ceramic ring adsorption and activated carbon absorption type scrubber ). Finally, it will be discharged environmental friendly. 3. PLC control : All motors and gauges of  the equipment are connected to PLC, which can realize mechanical and electronic control. The control cabinet is equipped with an alarm system. When the temperature, pressure, or mechanical abnormalities occur during the operation of the equipment, the control cabinet will automatically alarm.

We recommend the combination of ionic liquid desulfurization and industrial sulfuric acid process to treat the lead smelting flue gas to meet the standard emission and produce industrial sulfuric acid. Side-blown furnace flue gas purification: adopt adiabatic evaporation dilute acid cooling process, side-blown furnace flue gas purification into the automatic gas separation system to automatically adjust the amount of gas to be divided, 50% of the flue gas into the composite amine SO2 capture desulfurization system, 50% of the flue gas into one-turn one-suction acid production system RE TECH – the name that is synonymous with innovation, excellence, and sustainability in the field of metallurgy and recycling! Introduction of Main System Flue gas purifying system The flue gas from the side-blown furnace electric dust collector, enters the high efficiency scrubber, contact with the spray liquid to cool down, remove most of the mineral dust and other impurities, enter the packed scrubber tower, the packed scrubber tower to spray liquid scrubbing further dust removal, the temperature is reduced again, the flue gas after the second scrubbing into the automatic gas separation system, 50% of the flue gas into the composite amine SO2 capture desulfurization system, 50% of the flue gas into the flue gas cooling tower, cooling tower to spray liquid scrubbing further dust removal to cool down, then into the two-stage electric mist eliminator to remove acid mist and other impurities before entering the next step of dry suction section.

The standard capacity of this battery crusher and sorting system is 100,000t batteries per year, waste lead batteries (10% acid content) as raw material, the batteries will go through preliminary crushing machine to remove acid, then go to secondary crushing, vibrating screening, hydro-separator, heavy metal removal,water separation. Finally will get the final products lead paste, lead grid, PP plastic and heavy plastic. The plant acid water system is a closed circuit, with pH meter control and discharging system.

The furnace design of the RE-type oxygen enriched side blown furnace is a result of years of research and development led by the experts of the company from Central South University and nonferrous metallurgy industry. The team behind the design has extensive experience in the non-ferrous metallurgical industry. The very first patent on the oxygen-enriched side-blowing furnace process was obtained by Liu Wei, the founder of the company, in 2014. Since then, the company has been dedicated to continuous innovation and R&D to respond to the changing demands of the industry. The process design and furnace design have been constantly improved, resulting in the acquisition of more than 40 patents. The oxygen enriched side blown furnace plays a vital role in numerous industries, and this particular furnace type has garnered significant attention owing to its outstanding performance. It has proven to be a game-changer, not just in terms of economic benefits but also with regards to environmental protection,energy-saving,efficiency,safety and stability. Its popularity has only soared over the past decade, with newly-built smelters widely incorporating this furnace type. RE TECH – the name that is synonymous with innovation, excellence, and sustainability in the field of metallurgy and recycling! We're proud to be a world-leading furnace manufacturer and an integrated solution provider for comprehensive recycling of non-ferrous metal and safe disposal  of heavy metal hazardous wastes.As a disciplinary company of the Research Institute of Resource Regeneration and Environmental Engineering of CSU, we are established with technological innovation, and also with technological innovation as our corporate mission.

Threema:8FDX5N99 Whatsapp：+852 60643743 Email:13619649643@163.com Synon , yms eb 2-oxo PCE, Eticyclidone, O-PCE Technical Information: Formal Name 2-(ethylamino)-2-phenyl-cyclohexanone, monohydrochloride CAS Number: 4551-92-2 Molecular Formula: C14H19NO • HCl Formula Weight: 253.8 Purity: ≥98%

Minimum Order: 100

FGB (SHANDONG) BEARING MFG CO., LTD. Mr. Leo Jiang Marketing and Sales Director WeChat / Whatsapp: +86-187 6957 2768 E-mail : leojiang@fgbearing.com Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China since 2004. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Models:GE80ES GE80ES-2RS GE80DO-2RS ID: 80 mm OD:120 mm Width:55 / 45 mm Weight:2.3 kg GE20UK-2RS / GE20ET-2RS / GE25UK-2RS / GE25ET-2RS / GE30UK-2RS / GE30ET-2RS / GE35UK-2RS / GE35ET-2RS / GE40UK-2RS / GE40ET-2RS / GE45UK-2RS / GE45ET-2RS / GE50UK-2RS / GE50ET-2RS / GE60UK-2RS / GE60ET-2RS / GE70UK-2RS / GE70ET-2RS / GE80UK-2RS / GE80ET-2RS / GE90UK-2RS / GE90ET-2RS / GE100UK-2RS / GE100ET-2RS / GE110UK-2RS / GE110ET-2RS / GE120UK-2RS / GE120ET-2RS / GE140UK-2RS / GE140ET- 2RS / GE160UK-2RS / GE160ET-2RS / GE180UK-2RS / GE180ET-2RS / GE200UK-2RS / GE200ET- 2RS / GE220UK-2RS / GE220ET-2RS / GE240UK-2RS / GE240ET-2RS / GE260UK-2RS / GE260ET- 2RS / GE280UK-2RS / GE280ET-2RS / GE300UK-2RS / GE300ET-2RS / GE320UK-2RS / GE320ET- 2RS / GE340UK-2RS / GE340ET-2RS / GE360UK-2RS / GE360ET-2RS / GE380UK-2RS / GE380ET- 2RS /

Minimum Order: 50

All inert and dangerous materials, including metals, glass, electronic trash, PVC, etc., are removed and recycled as raw materials during hand sorting. The flammable waste fuel is then transferred to buffer storage. At this point, wood, plastics, textiles, and some leftover garbage make up the majority of the waste. Technical Advantages Of Manual Sorting of Waste Room Waste sorting room has an easy-to-maintain simple structure. Waste can be finely sorted by hand. Application Of Manual Waste Sorting Room Material recovery system (MRF) Mechanical biological treatment (MBT) Plastic recycling center Landfill waste sorting plant RDF Production Facility (Refuse Derived Fuel) Search... Operating Principle Of Manual Waste Sorting Room The sorting platform, drop hopper, sorting conveyor, and sorting room are all parts of the manual waste sorting room at Hengchuang. Following preliminary sorting, materials enter the sorting conveyor, where personnel on either side sift the recyclable garbage before tossing it into the drop hopper, where it enters the bin or conveyor below. A fresh air system that is optionally installed in the sorting room can enhance the working conditions for sorting personnel. Q&A Of Manual Waste Sorting Room  What is the Manual Waste Sorting Room? In home, landfill, and industrial trash sorting operations, manual sorting waste room are a typical sorting studio.  Is the Manual Waste Sorting Room Particularly Smelly? A fresh air system can be installed inside the enclosed manual sorting room to enhance the working conditions for manual laborers. There are many waste management equipment manufacturers, if you find to find a reliable manufacturer, please choose us.

Optical sorting machine recycling is a kind of equipment that uses visual recognition system and sorting system together to achieve automatic sorting, which can sort according to the color, shape and material of the material. Depending on the molecular structure of the materials, every organic molecule absorbs light of its own wavelength. Technical Advantages Of Optical Sorter Machine Excellent sorting efficiency Low energy use means reduced land use. It can take the position of manual sorting and reduce the amount of physical work required. Wide sorting range, capable of identifying a wide range of materials. Optical Sorting Machine Manufacturers Application Of Optical Waste Sorting Recovery mechanism for materials (MRF) Biological mechanical treatment (MBT) Recycling center for plastics (can sort PET, PP, PVC, PE, etc.) Metal sorting facility RDF production facility (waste-derived fuel) Search... Operating Principle Of Optical Sorting Machine Optical sorters identify and sort materials by analyzing the near infrared (NIR) light reflected from their surfaces. Depending on the molecular characteristics of the substance, each organic compound absorbs light at a different wavelength. As a result, the system is capable of identifying materials by evaluating the wavelength of reflected light optically. A spectroscope converts the measured light into an electrical signal, which is then turned into computer data. The data is analyzed by the computer in order to identify the elements in the waste stream. The computer uses compressed air to transfer the waste to a specific place after precisely detecting the substance in the waste stream. Q&A Of Optical Sorting Machine  What Does the Optical Sorter Do? Optical sorters are commonly used in waste treatment plants to detect and sort rubbish, as well as to sort recyclable materials. What is the Maximum Number of Pet Bottles That an Optical Sorting Machine Can Sort in One Hour? One optical sorting machine can identify and sort approximately 40,000 PET bottles in one hour. We have types of used optical sorter for sale, and the optical sorter price is low, if you have needs, please contact us. Hengchuang, a professional solid waste handling equipment manufacturer, provides full value-chain treatment one-stop solution for MSW, legacy waste, C&D waste, industrial waste, etc. with dedicated and customarized refuse handling equipment engineering, manufacturing, installation, commissioning, after-sales service, and O&M services.

Typically employed at transfer stations that occupy a limited space, mobile waste compactors are a type of hydraulic compression equipment that do not require fixed installation. Technical Advantages Of Mobile Garbage Compactor No installation is necessary. full-coverage operation, reduced odor. PLC automated control that is fully automatic. With the equipment alarm function, an alert will sound when the box is full or an operation fails. Application Of Mobile Waste Compactor Transfer station for municipal household garbage Residential neighborhoods, scenic regions, and a garbage transfer facility in the CBD Waste management facility Power plant that burns waste Search... Operating Principle Of Mobile Waste Compactor The garbage from each collection site is placed into the compressed bin of the waste transfer station by Hengchuang mobile garbage compressor, which repeats the process of "dumping, compressing, and dumping again" two to three times. The station's waste compressor's pressure causes the gap between different types of garbage to close and its mass to increase, which reduces the amount of room that different types of waste have and raises the density of the waste. The volume of the loose rubbish is reduced by compressing it into a high- density garbage block, which is then pushed by the pushing plate mechanism into the carriage of the fully enclosed garbage truck and sent to the garbage treatment plant (field) or garbage power plant for processing. This not only enhances the trash truck's single waste loading capacity, lowers the cost of transportation, but also prevents secondary environmental damage during rubbish transfer. Q&A Of Mobile Waste Compactor  What Distinguishes Fixed Garbage Compactors from Portable Ones? Mobile equipment must be outfitted with the appropriate equipment in accordance with the waste to be treated since stationary compression equipment has a high capacity but takes up a lot of space, while stationary compression equipment has a limited capacity but takes up less space. How Dense is Mobile Dumpster Compacting Equipment's Crushed Rubbish? The density of compressed domestic waste is about 600-700kg/m³. Now the price of trash handling equipment is reasonable, if you have needs, please contact us.

Permanent magnets, which do not require electrical power, are used in customized magnetic separator to separate ferrous metal from the garbage. To separate steel wires, nails, and gas cans that are traveling on the conveyor, the conveyor rotates around a substantial permanent magnet. The separator's body is built of a steel non-magnetic structure. This stops ferrous objects from being drawn to the separator's body. Technical Advantages Of Magnetic Separator Uses Compact structure, very low power consumption, stable and reliable work Small size, light weight, low failure rate, easy to use Stable structure, high efficiency of iron removal Magnetic Separator Application Of Magnetic Separator PPT MRF process for domestic waste RDF manufacturing plant (garbage derived fuel) Metal sorting plant Recycled aluminum sorting Landfill Waste Treatment Plant Search...  PRODUCTS WASTE RECYCLING SORTING MACHINE Trommel Screen (Rotary Screen) Disc Screen Ballistic Screen Optical Sorting Machine Air Separator Manual Waste Sorting Room Eddy Current Separator Magnetic Separator Waste Conveyor Waste Crushing Machine Hydraulic Waste Compactor Operating magnetic separator working principle pdf The equipment body, unloading system, and drive system make up the Hengchuang iron remover. The ferromagnetic material mixed in the material will become firmly adsorbed on the iron discharge belt under the strong magnetic attraction of the iron remover, and the ferromagnetic material will be thrown out of the site by driving the belt through the drive motor, achieving the goal of automatic iron removal. Q&A Of Magnetic Separator  What is the Use of Magnetic Separator? The magnetic separator is used to separate the ferrous metals from the material. What Types of Magnetic Separators Are Used？ Magnetic separators are belt type, drum type, roller type, disk type, ring type, etc.  What Kind of Magnetic Separator is Often Used in Waste Treatment? Belt-type magnetic separators are commonly implemented in waste treatment operations. If you want to know more about magnetic separator specification, magnetic separator ppt and magnetic separator function, please visit our website. As a waste management machine manufacturer, we will do our best to meet all the needs of customers.

The hydraulic waste compactor can compress garbage, reducing its size and making it easier to store and transport. Fixed, mobile types of hydraulic garbage compactor and baler are available. Garbage can be compressed by the trash compactor hydraulic system, which reduces its size and makes it simpler to carry and store. There are both fixed and portable hydraulic waste compactors and balers available. Large amounts of mixed, unsorted general garbage or sorted recyclable material are compressed into tightly packed blocks using hydraulic trash compactors. The compacted blocks can be swiftly delivered to a landfill or a recycling center. Irish businesses looking to better handle their waste handling needs may find an inexpensive answer in the KK Hydraulic line of commercial and industrial compactors. Types Of Hengchuang Hydraulic Waste Compactor For Sale Waste Baler Stationary Compactor Mobile Waste Compactor Refused Derived Fuels Machine (RDF) How Does Hydraulic Garbage Compactor Work? A hydraulic waste compactor reduces the surface area of rubbish by crushing it with a hydraulic metal ram. In terms of loading a chamber before turning on to start the ramming process, hydraulic garbage compactors normally operate quite similarly to balers, but their end product varies in that it does not produce a bale. This is because compactor waste doesn't move on to be processed further; instead, it ends up in a landfill. Trash Compactor Hydraulic System Characteristics And Advantages To increase service life in corrosive environments, the hydraulic trash compactor's main parts are processed first by shot peening, then with anticorrosive paint, and finally with the epoxy coat. The main body of the hydraulic waste compactor is constructed by soldering steel plates that are extremely weather resistant. For its beautiful appearance, light weight, great endurance, and resistance to corrosion, it is well made. The double-curved hydraulic garbage compactor head has an attractive waste breaking rate and compression efficiency. A liquid discharging mechanism for guiding liquid on the back of the container. Two guide wheels on the container door to make sure the hydraulic trash compactor and waste container are completely isolated from one another. Twin pumps for the trash compactor hydraulic system to increase productivity and cut down on energy use. Several security tools, including lamp indicators, warning signals, and interlocks on control programs. An optional dust-cleaning and deodorization device to make equipment cleaning easier. Why Choose Hengchuang's Hydraulic Garbage Compactor? One of our most recent generations of in-house garbage disposal technology is represented by this item. The hydraulic waste compactor is made up of the transfer rails, the main compress body, and the removable waste container. This trash compactor hydraulic system is perfect for small-scale garbage collection methods like manual collection using a cart, tricycle, or small dumper. The waste volume can be drastically decreased by using the horizontal compression technique. The liquid will be taken out of the garbage and placed in a container that is completely sealed. The hydraulic garbage compactor is highly praised for its versatility and ease of use. As one of waste handling equipment manufacturers, we can offer kinds of waste handling equipment for sale, if you have needs, please leave us a message.