Printing Machinery Parts

Genuine Printhead Toshiba CA4W / Xaar 318 The Toshiba TEC CA4W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Toshiba original printhead. It carries a one year warranty. The jig tools used to calibrate and fit this head are available as related products. This Toshiba TEC CA4W is supplied with head ID, voltage and waveform information. CA4W heads are identical to CA4LB and CA4LE printheads. This printhead carries a one year manufacturer warranty. Specifications: Technology: On Demand Piezo Electric Max. Resolution: 1200 dpi Droplet Size: 6 to 90 pico litre Maximum Grayscale Levels: 16 Tot. Amount of Nozzles: 318 Nozzle Spacing: 169 microns Firing Frequency: 28 kHz (1 drop) - 2.8 kHz (15 drops) Driving Voltage: 14 - 31 V EFI Rastek H650 Rastek H700

Minimum Order: 1 bags

Genuine Printhead Kyocera KJ4A-RH UV Inkjet This new generation Kyocera KJ4A-RH is designed for high speed single-pass and multi-pass applications with printers using UV ink.The Kyocera KJ4A-RH is equipped with internal filters that eliminate foreign objects in ink and an internal heater that adjusts the impact of external temperatures.It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 70 m/min by making use of 2,656 nozzles arranged across 108 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second. Specifications: Ink Type: UV Ink Dimensions: 200 × 30 × 68.9mm Dry Weight: 420g Total Nozzles:2.656 Standard Resolution: 600 x 600dpi Max. Drive Frequency:30kHz Drop Volume: 5, 7, 12 and 18pl Input Voltage:3.3 V for logic / 29 V for driving Temperature Control:Reservoir heater and thermistor are equipped

Minimum Order: 1 bags

High resolution, 360 nozzle per inch spacing has enabled arranging 512 Nozzle on a comactly designed print head. The KM512 series consists of type L, M and S, corresponding to unit drop volume capabilities of 42pl, 14pl and 4pl respectively. The type M and S can be driven in 4 level grey-scale mode for reproducing high quality images with smoother tones. Compatible with Solvent, UV, Oil ... Due to its specially designed internal structure, the KM512 series boasts a wide range of ink compatibility, including aggressive solvent inks typically used for super-wide format printers. Inks which have high viscosity at room temperature,such as UV ink, can be heated up to 55 degrees Celsius with the H type's internal heater. Enabling Comapct Design of Head Mount System This series is specially designed to have a "wing" structure so that users can precisely align the print heads without difficulty. This feature allows easy combination of page-width printhead units for the purpose of single-pass high-speed printing. The same external design allows interchangability of different type heads on the same mount system. Konica Minolta 512 head suitable printer HP DesignJet 9000s/8000s/DesignJet 10000s Myjet WB320 / LB320 / LE320 Seiko ColorPainter 64S / ColorPainter 100S Allwin C8 / C12 / H8 Liyu Apollo PTP-KL / Maxima PZ-KM DGI SaturnJet ST-1806 Flora HJ 3200Turbo

Minimum Order: 1 bags

Genuine Printhead ASM Vutek PV 200/600 This printhead is suitable for VUTEk PressVu UV 200/600 printers. This is the original VUTEk part (number AA90646). Printer compatibility: VUTEk PressVu UV 200/600 Specifications: - Technology: Piezo Electric - Max. Resolution: Up to 900dpi - Cal. Droplet Size: 28 pico litre - Adj. Range for Droplet Size: 25 - 30 pico litre - Tot. Amount of Nozzles: 256 - Nozzle Spacing: 254 microns (0.010 in.) - Nozzle Diameter: 36 microns - Firing Frequency: 20 kHz - Operating Temperature: up to 90°C - Ink Compatibility: Organic solvents, UV curables, Aqueous

Minimum Order: 1 bags

This original, solvent resistant Printhead is suitable for the Mutoh Rockhopper II printers. This is the Mutoh original Rockhopper printhead (number MY-44743). To be used with: Mutoh Rockhopper II(Falcon2), Rockhopper 3, Mutoh RJ8000, Spitfire 65, Spitfire 90, Blizzard 65, Blizzard 90; Packaging Details: Unit Type: pc Produce Weight: 32g Package Weight: 52g Product Size: 112mm Package Size:150mm x 60mm x 50mm Note: 1.This is the original Epson DX4 solvent printhead, delivered in a Roland original package. 2.This printhead not only suitable for eco, Solvent Ink, but also waterbased ink.

Minimum Order: 1 bags

Genuine Printhead XAAR 500-80-CM The print head Xaar 500 is perfect for those needing a versatile wide and grand-format or coding and marking (C&M sectors) binary inkjet solution. The 40pl model meets the demanding requirements of the high quality UV wide-format and solvent graphics markets, while the 80pl version leads the way in the solvent grand-format and C&M sectors. Xaar printheads carry Xaar product warranty. Manufacturer: XAAR Printer compatibility: Witcolor Ultra Max H4 / Ultra Max H6 DP part number : PPHXA50080

Minimum Order: 1 bags

Original Printhead Roland DX7/VS 640 Print Head 6701409010 Printer The Roland RE640 / VS640 DX7 printhead is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre) Condition: New product Genuine Printhead Roland DX7/VS 640 Print Head 6701409010 Printer The Roland RE640 / VS640 DX7 printhead is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for The Roland RE640 / VS640 DX7 printhead is 8 kHz. The Roland RE640 / VS640 DX7 printhead is based upon the most recent Epson technology. This is the original Roland printhead (part number 6701409010). Roland DX7 Printhead Product Specifications: • Technology: Micro-Piezo • Native resolution: 360 dpi • Min. Droplet Size: 1.5 pico litre • Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) • Firing Frequency: 8 kHz • Ink Compatibility: eco-solvent and mild solvent • Damper type: requires DX6 Valve Dampers DX7 Printhead DX7 Printhead Attention: 1. The surface of the printhead is very fragile, absolutely can not bump, must be protected. 2. When installing the printhead must be careful, be sure to power off, and put in place. 3. In order to avoid the damage of the print head due to improper installation, the printhead must be installed by professionals. 4. Should pay attention to the daily maintenance of the printhead (can use the cleaning liquid to clean the printhead, will not let the nozzle blockage). 5. Due to the nature of Printer Parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer's responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and call us. Remarks: Original Part no.: 6701409010

Genuine Printhead HP Q6670-60001 Designjet 8000s Print Head HP Designjet 8000s printhead is delivered together with HP flush cartridge. This Konica Minolta 256 14 pl printhead is compact and offers high-resolution and high-speed. It is suitable for both wide format and industrial applications. The Konica 256 printhead (14 picoliter) is suitable for high quality multi-pass printing. This is the original print head for HP Designjet 8000s printers (part number Q6670-6001).

Minimum Order: 1 bags

Genuine Printhead Toshiba Tec CE4W1 This Toshiba TEC CE4W1 on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink. The Toshiba TEC CE4W1 is suitable for UV curable and Oil based inks, has 4 ink inlet ports and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This Toshiba TEC CE4W1 is supplied with head ID, voltage and waveform information. Product Specifications: Technology: Multi-drop grayscale micro-piezo Grayscale levels: 16 Active nozzles: 636 Print swathe width: 53.7 mm Nozzle pitch: 84,5 μm Native resolution: 150 dpi Maximum resolution: 300 dpi Printhead weight: 148 g Dimensions: 85 x 70 x 23 mm Drop volume: 6 - 90 pl Typical firing frequency: 2.8 - 28 kHz Ink Compatibility: oil-based pigment ink and UV curable pigment ink

Minimum Order: 1 bags

Ricoh GEN4L 15PL Printhead MH2620 Ricoh GEN4L 15PL Printhead MH2620 is appropriate for a scope of oil, water, solvent and UV printers, including the first D.Gen Teleios Grande, D.Gen Teleios (TJ-2600) and Teleios (TJ-3333). This printhead has a coordinated radiator and thermistor. This is Ricoh unique printhead and it is secured by a producer guarantee. This printhead is not perfect with the more up to date D.Gen Teleios Grande G5 or Teleios Grande/H6. These printers utilize Ricoh GEN5 Printhead Water (PPHRI18045). Technical Specifications – Size: 13,2 x 120 x 75,5 mm (excluding cables) – Head Materials: SST, Ni and Epoxy Adhesive (direct contact with ink) – Nozzle Plate Surface: Non-wet coating – Number of Nozzles: 2 x 192 nozzles – Nozzle Spacing: 0,1693 mm – Piezo Type: D33 Stacked PZT – Temperature Control: Integrated Heater and Thermistor – Operator Temperature range: Up to 80° C – Native Drop Volume: 15 pl – Drop Volume Range: 15-45 pl – Jetting Frequency: Up to 30 kHZ – Life: 100 billion actuations per nozzle

Spectra SM-128/50 AA Printhead The SM-128 AA is a compact and lightweight 50 pL jetting assembly designed specifically for ink jet applications requiring multiple printheads packed tightly together. These modules are ideal for fast moving, high performance printer carriage designs. Two electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 128 jets. The nozzles are arranged in a single line, at a 0.020 inch distance between nozzles. Resolutions up to 600 dpi are possible. Features 50 picoliters calibrated drop size. Resolutions up to 600 dpi. 128 individually addressable, inline nozzles. Lightweight and highly stackable. Orientation independent. Supports solvent and UV-curable based inks. Dual ported for ease of flushing. Optional temperature control. SE-128/50 AA Active nozzles 128 Nozzle spacing 508 μm Nozzle diameter 50 μm Drop velocity 8 m/s Printhead weight (dry) 25 g (0.88 oz) Fluid type Organic solvents, UV curables Drop volume* 50 pl Typical firing frequency 20 kHz Dimensions (WxDxH) 102x5x102mm

Minimum Order: 1 bags

Mimaki dx5 Printhead This original Mimaki print head jv5 is used for Mimaki JV33 / JV5 printers. It is the new generation print head that allows fast speed, high resolution printing with eco solvent or mild solvent inks. This Mimaki JV5 original print head is delivered in a sealed Mimaki package (part number M007947). This is Mimaki original print head with the head ID but without the head memory board.

Minimum Order: 1 bags

Kyocera KJ4B-0300 Aqueous Inkjet Printheads Kyocera KJ4B-0300 Aqueous Inkjet Printheads is designed for high speed printing of water-based inks. It is optimal for Transaction Printing, Document Printing, Textile, MICR Printing and others. Features of Kyocera Inkjet Printheads Wide print width: 108mm – wider printing coverage with fewer printheads High-speed, high resolution and grayscale printing – available simultaneously Reliability in continuous printing – unique ink channel design provides stable ink supply to all 2,656 nozzles

Minimum Order: 1 bags

Printhead DX6 F191140 / 191040 / 191110 / 191141 For Epson Printer Applicable Industries:Machinery Repair Shops, Retail, Printing Shops, Advertising Company, wide format printer Type:Printhead Use:For Epson Printer Product Name:DX6 Printhead Printing Type:Inkjet Printer place Of Origin:Japan F191140 / 191040 / 191110 / 191141 DX6 Printhead for Epson 7900 / 9700 / 7700 / 9900 / 7910 / 9910 / 7710 / 9710 Printer Product Description: F191140/F191040 DX6 Printhead For EPSON Name:DX6 Printhead Parts code :F191140 / F191040 Place of origin:Japan Type :Inkjet Printer Suitable for :epson 7700 / 9700 / 7910 Printer

Minimum Order: 1 bags