Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Power Supplies & Equipment


Home > Offers to Sell > Electronics & Electrical > Power Supplies & Equipment

Browse leads by category:
    
    
 
 

Summary of 12/24/24 16:28 GMT:>> Show Compact View
7/22/22 3:22 GMT
A2426-ES

Philips Compatible NIBP Hose Pressure Cuff Extension Tube, single tube, 3m Parameters of A2426-ES NIBP Hose More types of nibp cable, please visit our website. Now the price of china medical consumables is affordable, if you have needs, please contact us. As a medical supplies company, we will do our best to meet all the needs of customers.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
apk-technology


Send Inquiry
APK Technology Co., Ltd.
6 Floor, B2 Building, Industry of Hengfeng, Hezhou, Xixiang, Bao'an District, Shenzhen, Guangdong,
Guangdong 518126
China
7/22/22 3:21 GMT
A1418-SA203PV

A1418-SA203PV Covidien > Nellcor Compatible Short SpO2 Sensor Non Oximax Adult Finger Clip Sensor wi Parameter of A1418-SA203PV reusable pulse oximeter sensor As a hospital supplies supplier, we also have types of reusable pediatric pulse oximeter for sale, anything you need, please leave us a message. If you want to know more types of medical supplies, please visit our website.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
apk-technology


Send Inquiry
APK Technology Co., Ltd.
6 Floor, B2 Building, Industry of Hengfeng, Hezhou, Xixiang, Bao'an District, Shenzhen, Guangdong,
Guangdong 518126
China
7/22/22 3:21 GMT
A1418-SA203PU

Covidien > Nellcor Compatible Short SpO2 Sensor Non Oximax Adult Soft SpO2 Sensor with 90cm Cable DB If you want to know more types of nellcor pulse oximeter extension cable and masimo spo2 extension cable, please visit our website. As a medical accessories manufacturer, we also offer types of medical cables for sale, anything you need, please contact us.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
apk-technology


Send Inquiry
APK Technology Co., Ltd.
6 Floor, B2 Building, Industry of Hengfeng, Hezhou, Xixiang, Bao'an District, Shenzhen, Guangdong,
Guangdong 518126
China
7/11/22 6:28 GMT
Dual 8-inch Line Array Series Speaker

GX-SP2008DL-Z series dual 8 inch line array speakers is equipped with a two high-performance 8-inch bass units. The treble unit of the box speaker array suppresses and modifies its UHF through DSP, so mid and high frequency is euphonious without noise and low frequency is soft, up to the maximum sound pressure level. The crossover point of the speaker's unique built-in crossover closely controls the overall coordination of the sound, which makes the sound softer and fuller than the sound of the traditional speaker. The mid-high pitch of the speaker adopts a high Q value and constant directivity coverage angle horn of horizontal and vertical controls the sound field coverage with the futures of the unique Hi-Fi sound, clear pronunciation, excellent treble and bass, high fidelity, max sound pressure level, accurate sound positioning and so on. The entire line array system has a extraordinary penetration and high- fidelity sound in the mid-long distance, suitable for theaters, halls, multi- function halls, stadiums and so on. Technical Specifications of Dual 8-inch Line Array Series Speaker Gonsin Conference Equipment Co., LTD. Is a professional conference equipment supplier, we provide video and audio conferencing system, array sound system for sale, line array sound system for sale, the box line array, box sound line array, line array speaker box, line array 8, sound array speakers, conference room audio visual solutions, conference equipment for sale, etc. Contact us to know more.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
gonsin2022
86 757 2236 0968

Send Inquiry
Gonsin Conference Equipment Co.,LTD.
11th Floor, Block 2, Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde,
Guangdong
China
7/11/22 6:28 GMT
Dual 5-inch Line Array Series Speaker

The dual 5-inch line array speaker china is a small line array package. The GX- SP2005DL-Z box speaker array is equipped with 2 5- inch Celestion units and 3 neodymium magnet 0.5-inch Celestion tweeters. The high and low units are matched with each other to make the sound Clean and powerful, and the intermediate frequency is more prominent and clear. Exquisite and concise appearance design, the back panel is designed with 9 kinds of angle accessory brackets, which is convenient for angle adjustment in different occasions. The whole system is simple to use and practical. With the GX-SP2012SSBB-Z 12-inch passive subwoofer speaker, the bass is enhanced and the sound field is more full and powerful. The box body is designed with a rectangular parallelepiped frameless structure, with a structural handle, small in size, light in weight, easy to install and move, and does not affect the overall appearance of the decoration. Applications of Dual 5-inch China Line Array Series Speaker Auditorium Multifunctional hall Meeting room Banquet hall Gonsin Conference Equipment Co., LTD. Is a professional cline array supplier, we provide audio equipment for meetings, box line array 5 inch, system line array, line array speaker system for sale, conference room av system, conference equipment for sale, etc. Contact us to know array speakers price or more.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
gonsin2022
86 757 2236 0968

Send Inquiry
Gonsin Conference Equipment Co.,LTD.
11th Floor, Block 2, Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde,
Guangdong
China
7/11/22 6:27 GMT
Dual 12-inch Line Array Series Speaker

The GX-SP2012DL-Z Box speaker array 12 inch is a large-scale two-way crossover system providing a bandwidth of 55Hz-20KHz. Our 12 inch line array speakers are fitted with two British top-level 44 mm voice coil HF drivers coupled to a special constant-path aluminum horn and two 12-inch LF drivers with great dynamic margins. It produces strong penetrating power, clear and thick vocals and super high sound pressure levels. The whole speaker of 12-inch line array is beautiful and concise in shape, and exquisite in appearance, which is an extremely competitive large-scale line array system. The GX-SP2018DSBB-Z box line array 12-inch speaker uses a custom-made speaker unit that is precisely modulated and the cabinet is a symmetrical compression design. It employs two 18" drivers in a symmetrically compressed enclosure, featuring extremely deep low frequency which has strong power and elasticity at the same time. Combined with GX-SP2012DL-Z, the box speaker line array 12-inch generates a large dynamic, high SPL, clear and delicate sound as well as a tunable full-range response range. 12 Inch Box Spekaer Line Array Features 1. A compact two-way passive, line array system, intended for use in arrays with fixed curvature. 2. This is a versatile loudspeaker system for medium & large indoor venues. 3. It is suitable in small and medium outdoor scale applications, or as a delay tower for large-scale sound reinforcement systems. Box Speaker 12 Inch Line Array Technical Specifications Gonsin Conference Equipment Co., LTD. Is a professional conference equipment supplier, we provide audio video conferencing equipment, antenna signal combiner, conference system, conference equipment for sale, etc. Contact us to know more.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
gonsin2022
86 757 2236 0968

Send Inquiry
Gonsin Conference Equipment Co.,LTD.
11th Floor, Block 2, Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde,
Guangdong
China
7/11/22 6:26 GMT
Dual 10-inch Line Array Series Speaker

GX-SP2010DL-Z powered array speakers is a medium-sized two-way crossover system, providing a bandwidth of 55Hz-20KHz. The box speaker array is fitted with two British top-level 34 mm voice coil HF drivers and two 10-inch LF drivers with stronger penetrating power and higher sound pressure level. The design is elaborate with superb appearance. GX-SP2018SSBC-Z is a subwoofer designed specifically for using with the GX-SP2010DL-Z speaker line array 10 inch. The bass-reflex design makes the bass more abundant and powerful. With GX-SP2010DL-Z, it makes a high sound pressure level, clear sounds and a controllable full-range response range. Technical Specifications of Dual 10 inch line array speakers Gonsin Conference Equipment Co., LTD. Is a professional conference equipment supplier, we provide audio system for conference, array 10 inch, line array 10, powered line array, speaker array 10 inch, antenna signal combiner, conferencing system, conference equipment for sale, etc. Contact us to know more.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
gonsin2022
86 757 2236 0968

Send Inquiry
Gonsin Conference Equipment Co.,LTD.
11th Floor, Block 2, Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde,
Guangdong
China
7/11/22 6:26 GMT
Digital Tuner GX-PB1403

Features of Digital Tuner GX-PB1403 Standard 2U chassis, aluminum panel, convenient and beautiful Equipped with high brightness dynamic VFD LCD, the display content is clear and eye-catching Stereo two band reception: Am or FM With radio frequency automatic search and storage function andpower-off memory function AM and FM two groups of receiving antenna input 1 channel audio signal stereo audio output Support remote control Technical Parameters of audio digital tuner GX-PB1403 Gonsin Conference Equipment Co., LTD. Is a professional conference equipment supplier, we provide conference room audio video equipment, antenna signal combiner, meeting room equipment, etc. Contact us to know more.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
gonsin2022
86 757 2236 0968

Send Inquiry
Gonsin Conference Equipment Co.,LTD.
11th Floor, Block 2, Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde,
Guangdong
China
7/11/22 6:25 GMT
Features of Digital Feedback Suppressor GX-FBK05-N Precision-machined alum

The IP Network system very suitable for government, army, fire alarm, rail way/ metro system, touring place, factory, bank, company, shopping mall, hotel, theater, gym, garden, street, village, safety city etc. public places. Easy operation and install, just connect the IP terminal into IP network would be huge IP broadcast system. Types of Digital Public Address System IP Network System Analog Broadcasting System Gonsin Conference Equipment Co., LTD. Is a professional conference equipment supplier, we provide conference room audio equipment, antenna signal combiner, pa announcement system, public announcement system, conference equipment, etc. Contact us to know public announcement system price or more.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
gonsin2022
86 757 2236 0968

Send Inquiry
Gonsin Conference Equipment Co.,LTD.
11th Floor, Block 2, Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde,
Guangdong
China
6/27/22 9:43 GMT
Mitsubishi FR-E820-2.2K-1 inverter adopts metal shell and long-life compone

Common types of Mitsubishi frequency converter Fr-d700 series Fr-d700 series frequency converter is a compact multi-function frequency converter. 1. Power range: 0.4~7.5kw; 2. General flux vector control, 150% torque output at 1Hz; 3. Adopt long-life components; 4. Built in Modbus RTU protocol; 5. Built in braking transistor; 6. Expand PID and triangle wave function; 7. With safety stop function. Fr-e700 series Fr-e700 series frequency converter is an economical high-performance frequency converter. 1. Power range: 0.1~15kw; 2. Advanced flux vector control, 200% torque output at 0.5Hz; 3. Extended PID, flexible PWM; 4. Built in Modbus RTU protocol; 5. Stop accuracy is improved; 6. Add option card fr-a7nc to support CC link communication; 7. Add option card fr-a7nl to support LonWorks communication; 8. Add option card fr-a7nd, which can support deveice net communication; 9. Add option card fr-a7np to support PROFIBUS DP communication. Fr-a740 series 1. High precision torque / speed / position control can be carried out in closed loop; 2. Sensorless vector control can realize torque / speed control; 3. Built in PLC function (special model); 4. Use long-life components with built-in EMC filter; 5. Powerful network communication function, supporting DeviceNet, PROFIBUS DP, MODBUS and other protocols. Fr-f740 series 1. Power range: 37~220kw; 2. Simple magnetic flux vector control mode, achieving output torque of 120% at 3Hz; 3. Better excitation control mode is adopted to realize higher energy-saving operation; 4. Built in PID, frequency converter / power frequency switching and multi pump circulating operation function; 5. Built in RS485 communication port; 6. Use long-life components; 7. Built in noise filter (above 75K); 8. With energy-saving function, the energy-saving effect is clear at a glance. Adding EMI filter to the input end of Mitsubishi inverter can effectively suppress the conducted interference of Mitsubishi inverter to the power grid. Adding input AC and DC reactors can improve the power factor and reduce harmonic pollution, with good comprehensive effect. When the distance between some motors and Mitsubishi frequency converter exceeds 100 m, it is necessary to add AC output reactor at the side of Mitsubishi frequency converter to solve the leakage current protection caused by the distribution parameters of output wire to the ground and reduce the external radiation interference. An effective method is to adopt the method of threading steel pipe or shielding cable, and reliably connect the steel pipe shell or cable shielding layer with the earth. It is worth noting that when AC output reactor is not added, if steel pipe threading or shielded cable method is adopted, the distributed capacitance of output to ground is increased, and overcurrent is easy to occur. Of course, in practical application, one or several methods are generally adopted. Control cabinet: Mitsubishi Inverter should be installed inside the control cabinet. The following problems should be paid attention to in the design of the control cabinet. 1. Heat dissipation of Mitsubishi inverter: the heating of Mitsubishi inverter is caused by internal losses. The main circuit is the main part of the losses in Mitsubishi frequency converter, accounting for about 98%, and the control circuit accounts for 2%. In order to ensure the normal and reliable operation of Mitsubishi inverter, it is necessary to heat the Mitsubishi inverter. We usually use fans for heat dissipation; The built-in fan of Mitsubishi frequency converter can take away the heat dissipation inside the box of Mitsubishi frequency converter. If the fan cannot work normally, stop the operation of Mitsubishi frequency converter immediately; The high-power Mitsubishi inverter also needs to add a fan to the control cabinet. The air duct of the control cabinet should be designed reasonably. All air inlets should be equipped with dust screens to ensure smooth exhaust, so as to avoid eddy currents in the cabinet and dust accumulation at fixed positions; The matching fan shall be selected according to the ventilation volume in the manual of Mitsubishi inverter, and attention shall be paid to the shockproof problem in the installation of the fan. Ambient temperature of Mitsubishi inverter: when the temperature is too high and the temperature changes greatly, the internal of Mitsubishi inverter is prone to condensation, and its insulation performance will be greatly reduced, which may even cause short circuit accidents. If necessary, desiccant and heater must be added to the tank. In the water treatment room, the water vapor is generally heavy. If the temperature changes greatly, this problem will be more prominent. At present, the A700 series and e700 series of Mitsubishi inverter are widely used in the market. A700 series is a general-purpose inverter, which is suitable for occasions with high starting torque and high dynamic response. The e700 series is suitable for occasions with simple functional requirements and low requirements for dynamic performance, and has advantages in price. Electromagnetic wave interference: due to rectification and frequency conversion during the operation of Mitsubishi frequency converter, a lot of interference electromagnetic waves are generated around. These high-frequency electromagnetic waves have certain interference on nearby instruments and instruments. Therefore, the instrument and electronic system in the cabinet should use metal shell to shield the interference of Mitsubishi inverter to the instrument. All components and parts shall be reliably grounded. In addition, shielded control cables shall be selected for the wiring between electrical components, instruments and meters, and the shielding layer shall be grounded. If electromagnetic interference is not handled properly, the whole system will often fail to work, resulting in control unit failure or damage.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Angelina
18026552038

Send Inquiry
Linture Technology Co.,Ltd
No.0506 , Block B ,Gemini Building , Jiangbei , Huicheng Distric
Huizhou 516000
China
6/27/22 9:19 GMT
Mitsubishi Q38B main substrate uses transistors for unified output

1 axis, sscnet connected Control unit: mm, inch, degree, pulse. Number of positioning data: 600 data / axis. 40 pin connector Easily realize high-speed and high-precision positioning control. Support multiple types of positioning control, Including 2-4 axis linear interpolation, 2-axis circular interpolation, speed control, speed / position switching control, path control, constant speed control, etc. In addition, software such as "GX configurator QP" can be used to facilitate positioning, setting, monitoring and debugging. Q38b saves wiring through sscnet cable connection, and the total cable distance can be up to 30m In addition, it supports the absolute position system to determine the origin position through the origin return data deployment operation. There is no need to wire the near point stop, etc. Interface module telephone line connecting peripheral equipment adapter for q2mem memory card with standard PCMCIA interface. 10BASE-T/100BASE-TX。 Web servo module for RS-232. The web server module, which uses the Internet / Intranet to perform meta process monitoring on the programmable controller, uses a PC connected to the Internet and simply needs to be deployed, MELSEC can be remotely monitored / operated from any location. The data recording function can be used to display and collect data. Data can be recorded at the shortest interval of 100ms. It also has the following functions. Send data / alarm notifications via email. Use FTP to transfer / obtain data files. Display function of event monitoring / history. User authentication /p filter and other security functions. Users can customize the creation of web pages. 8-axis, differential driver output type control unit: pulse. Number of positioning data: 10 data / axis. Maximum pulse output: 4mpps. 40 pin connector. Differential output. Ideal solution for simple multi axis positioning. Perfect match with stepping motor control. The acceleration and deceleration are smooth and the speed changes slightly. Speed up the start-up processing of positioning control. Locate the module. Open collector output type differential driver output type It can be divided into two types: open collector output type and differential driver output type. The differential driver output positioning module can reliably transmit high- speed command pulses (up to 4mpps) to the servo amplifier, with a transmission distance of up to 10 meters, realizing high-speed and high-precision control. (the maximum command pulse of open collector positioning module is 200kpps.) Reduce system downtime recovery time. With simple operation, all data in the CPU can be backed up to the memory card. Through regular backup, the latest parameters, programs, etc. can always be saved to the memory card. In case of CPU failure, after replacing the CPU, the system can be restored through a simple operation through a memory card that has previously backed up the data As a result, you don't have to spend time managing backup data, and you can reduce recovery time in the event of system downtime. Input: 2 channels. Counter input signal: dc5/12/24v. External input: dc5/12124v. Unified output: Transistor (drain type). Used to replace a series large module "ad61". 40 pin connector It supports high-resolution equipment, pulse input for high-speed and high- precision control applications, and high-speed counter module product group. High speed counter module for counting high-speed pulse train. It can be combined with external encoder for positioning and other control. The highest counting speed can be switched to count low-frequency pulses from high-speed pulses to gentle rising / falling edges. Each channel 1 is equipped with 2 external consistent outputs, "Consistent output function" and "continuous comparison function" can be selected according to the purpose to realize the high-speed control of external equipment. (QD64D2 It provides a variety of functions, such as consistent output test function (when using continuous comparison function), preset function and latch counter function. To meet the monthly requirements of various applications. (QD64D2) The maximum counting speed of input pulse can reach 8mpps (differential input, 2-phase 4-octave). It can be used in semiconductor, liquid crystal manufacturing and other equipment requiring high position accuracy, Precise position tracking is performed using a high-resolution encoder. (QD65PD2)

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Angelina
18026552038

Send Inquiry
Linture Technology Co.,Ltd
No.0506 , Block B ,Gemini Building , Jiangbei , Huicheng Distric
Huizhou 516000
China
6/27/22 8:58 GMT
Mitsubishi Electric NZ2GF2BN-60AD4 A/D Converter Unit

Condition: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Terms: , We ships worldwide and accepts T/T and Paypal. All items are subject to availability and passing our QA testing and inspection. Turnaround Time: Standard order processing is 1-2 business days plus shipping method chosen. Rush and off-hours service available for an additional fee. Packaging and Handling: Items are safely packaged in custom shipping cartons for protection. Shipping: We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded. Call to use a shipping service other than the ones listed. International Customers are responsible for all Customs fees, VAT and other fees applied by their respective countries. All shipments are fully insured.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Angelina
18026552038

Send Inquiry
Linture Technology Co.,Ltd
No.0506 , Block B ,Gemini Building , Jiangbei , Huicheng Distric
Huizhou 516000
China
6/6/22 8:40 GMT
DC Input Moudel Positive Common Terminal Type QX42 Model Isolation Method

Qx42 Parameter Description: DC input 64 points, DC24V 4mA, response time 1 / 5 / 10 / 20 / 70ms, 32 points, 1 common end, common anode, 40 pin connector * 2. Specification of Mitsubishi PLC moudel qx42: [input form] DC input module (positive common terminal type) [input points] 32 points [isolation method] Optocoupler [rated input voltage] DC24V (+ 20 / - 15%, ripple coefficient within 5%) [rated input current] about 4mA [enter derating value] refer to derating diagram [on voltage / on current] 19v or higher / 3mA or higher [off voltage / off current] 11V or less / 1.7ma or less [input impedance] about 5.6k Ω [on - > off response time] 1ms / 5ms / l0ms / 20ms / 70ms or less (CPU parameter setting) initialization set to 10ms [off - > on response time] 1ms / 5ms / l0ms / 20ms / 70ms or less (CPU parameter setting) initialization set to 10ms [dielectric withstand voltage] 560vac MS / 3 cycles (altitude 2000m (6557.38 feet)) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ Voice simulator with s voice width and 25 to 60Hz voice frequency First instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 32 points / common terminal (common terminals: 1b01, 1b02, 2B01, 2B02) [I / O points] 64 (set the I / O allocation according to the 32 point input module.) [running indicator] on indication (LED) [external connection] 40 pin connector [applicable wire diameter] core 0.3mm2 (for a6con1) [external wiring connector] a6con1, a6con2, a6con3 (optional) [applicable connector / terminal strip] a6tbxy36, a6tbxy54, a6tbx70 [5VDC internal current consumption] 90a (standard: all points on) [overall dimension (h * w * d)] 98 * 27.4 * 90mm [weight] 0.18kg

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Angelina
18026552038

Send Inquiry
Linture Technology Co.,Ltd
No.0506 , Block B ,Gemini Building , Jiangbei , Huicheng Distric
Huizhou 516000
China
6/6/22 8:37 GMT
Q Series DC Power Supply Mitsubishi QY81P Model 32 Point Source Output

Mitsubishi q series DC power supply 32 point source output module qy81p product specification: [output type] transistor source output module [32 points] output [isolation method] Optocoupler [rated load voltage] 12-24vdc (+ 20 / - 15%) [maximum load current] 0.1a/point, 2A / common terminal [maximum starting current] 0.7A, 10ms or less [leakage current at off] 0.1mA or less [maximum voltage drop at on] 0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A [off - > on response time] 1ms or less [on - > off response time] 1ms or less (rated load, resistive load) Zener diode [protection function] activate the overheating protection function in 2-point increments and the overcurrent short-circuit protection function in 1-point increments [external power supply voltage] 12 / 12VDC (+ 20 / - 15%) (ripple coefficient within 5%) [external power supply current] 40mA (at 24VDC) / 1 common terminal [dielectric withstand voltage] 560vac MS / 3 cycles (altitude 2000m) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ S voice width and 25 to 60Hz voice frequency voice simulator first instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 32 points / common terminal [I / O points] 32 (set the I / O allocation according to the 32 point output module.) [running indicator] on indication (LED) [external connection] 37 pin connector * 2 [external wiring connector] a6con1, a6con2, a6con3, a6con4 (option) [5VDC internal current consumption] 95ma (standard: all points on) [overall dimension (h * w * d)] 98 * 27.4 * 90mm [weight] 0.15kg

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Angelina
18026552038

Send Inquiry
Linture Technology Co.,Ltd
No.0506 , Block B ,Gemini Building , Jiangbei , Huicheng Distric
Huizhou 516000
China
6/6/22 8:31 GMT
Insulating Material Intelligen Inverter FR-A820-2.2K-1

Note: In order to prevent electric shock, the motor and frequency converter must be grounded before use. • Do not install the incoming capacitor or surge suppressor, radio noise filter to the output of the frequency converter. This will lead to the failure of the frequency converter or the damage of the capacitor and surge suppressor. If any of the above equipment has been installed, please remove it immediately. When it is necessary to set a non fuse circuit breaker at the output end, please consult the manufacturer for the selection of non fuse circuit breaker. • With regard to electromagnetic wave interference, the input / output (main circuit) of the frequency converter contains high-frequency components, which may interfere with the communication equipment near the frequency converter (such as AM radio). Therefore, EMC filters are installed to minimize interference. • For details of peripheral devices, please refer to the user manual of each option and peripheral device. • PM motor cannot operate on power frequency power supply. • Because PM motor is a motor with built-in permanent magnet, even when the power supply of frequency converter is disconnected, as long as the motor is still rotating, high voltage will be generated at the motor terminal. When the output switch is closed, turn on the power supply of the frequency converter and use it when the motor is stopped.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Angelina
18026552038

Send Inquiry
Linture Technology Co.,Ltd
No.0506 , Block B ,Gemini Building , Jiangbei , Huicheng Distric
Huizhou 516000
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   48  |   49  |   50  |   51  |   52  |   53  |   54  |   55  |   56  |   57  |   58  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com