Power Supplies & Equipment

10kw 96v dc to 220v ac power inverter 96v inverter offered by us supports pure sine wave output. This product is equipped with in built MPPT solar charge controller(optional) for uninterrupted supply of solar power needed for smooth running of any solar system. All its parameters can be programmed easily to meet specific application requirement. 10KW Low Frequency Off Grid Pure Sine Wave Inverter has auto restarting function and it is suitable for off grid as well as for grid back up functions. This inverter also has LCD display arrangement with LED indicator based design for the convenience of operator.

Minimum Order: 1 bags

3kw 5kw 10kw rack mount inverter Technical Features/Our Advantages With low frequency transformer, 100% full power output, can work 24hx7. High efficiency > 94%, low loss and long service life > 15 years. Mitsubishi IPM intelligent modular structure design, easy and low cost for future's maintenance, powerful protection for over load, short circuit, over temperature which is more safe and reliable. The DC input voltge range, output voltage, output frequency can be set. Two kinds of start mode: variable frequency start or step down voltage start, higher capacity to drive inductive load. AC bypass input(DC power priority or AC bypass power priority can be set) and RS485 monitoring optional. Wide voltage input range can be selected from 100-400VDC or 200-600VDC or 400-800VDC, off grid inverter can work without battery. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. Approved by European CE (EMC, LVD, UL1741, CSA22.2) certificate. Optional Function RS485 remote monitoring Can add AC bypass input complementary function Can built in solar charge controller or AC-DC charger Product Specifications DC Input DC input: 48/96/120/144/192/240/300/360/480/540/600Vdc AC Bypass Input: Optional AC Output Rated output power: 5kw Pure sine wave AC output voltage: 110/120/220/230/240/380/400/415/440/480VAC (optional) Output phase: Single phase or Split phase or Three phase Frequency: 50hz or 60hz Power Factor: >0.95 Inverter efficiency: >94% LCD Display Voltage accuracy: Load balancing<1%, Unbalance <5% THD: linear load, 2%, nonlinear load >3% No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps) Protections Overload 150% for 5 seconds, 120% for 35 seconds Input reverse polarity Under voltage Over voltage Output over current Short circuit Over temperature Fan cooled, Always on Short circuit: no automatic recovery. Restart required <50dB Operating temperature: -25 to 55 Celsius Humidity: 90% non-condensing Dimensions: Rack Mount Cabinet 482mm(Width) x 605mm(Depth) x 267mm(Height) or Stand Cabinet 450mm(Width) x 550mm(Depth) x 860mm(Height) Weight: 85kg

Minimum Order: 1 bags

PRODUCT DESCRIPTION LED Drivers Power Supply 1600V High Voltage Test 24V 400W 16.5A Showcase Display Quick Detail: High power Indoor type aluminum shell AC/DC switching 24V 400W 16.5A single-switch LED driver AC input voltage: 90-130V or 170-250V 1600V High voltage test, full loading test and old aging test Constant voltage driver apply for LED light strip, LED module and so on IP20 grade CE, ETL approvals 3 Years Warranty Unit Size: 21.4*11.4*5.0CM & Unit Weight: 810g Description: Our products are widely used in LED industrial project, communications power, aerospace, industrial control systems, posts communications, medical equipment and other industrial and commercial fields. All these products adopt PWM high- frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application. High Power LED Drivers have 12V and 24V types with 400W, 500W,600W,700W,800W,1000W and more. they are mainly used for LED light strip, LED module, light piece, light box/lamp house, signboard light, line light, wall light, underground light, LED guardrail tube, perforated light etc. Specifications: Series Name LED Driver IP20 LED Drivers Power Supply 24V 400W 16.5A 1600V High Voltage Test 0 1 Basic info 24V 16.5A 400W 2 Model S-400W-24V( indoor) 3 Material Aluminum 4 Efficiency 75% 5 Rated input 220VAC 50/60Hz 6 Voltage Range 90-130V or 170-250V 7 Output Voltage DC24V±5% 8 Output Current 16.5A 9 Output Power 400W 10 Grade IP20 12 Protect Shortage/Overload Over voltage/Over current 13 Dimension 21.4*11.4*5.0CM 14 Weight 810g Notices: 1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC). 2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment. 3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks. 4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload. 5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on. 6. For safety, properly grounded, the output power cable must be ≥2.5mm2 7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode). 8. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed. 9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof) High Power 12V 24V LED drivers related models list: Series Input Voltage Output Value Weight/g Size/mm 12V/24V 90-130V/170-250V 400W 810 214*114*50 12V/24V 90-130V/170-250V 500W 935 220*114*58 12V/24V 170V-250V 600W 1180 200*130*65 12V/24V 90-130V/170-250V 700W 1185 200*130*65 12V/24V 170V-250V 800W 1185 200*130*65 12V/24V 170V-250V 1000W 1202 242*125*65 Applications: Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, LED tube, offices , hospital , schools , factories , plants, shopping malls, supermarkets, kitchen, fair cabinet and so on.

Super-Li Online UPS1-3kVA(Li-ion Battery Support) Introduction:Super-Li Online HF UPS 1-3K is adopted highest level DSP controlled UPS with Lithium battery.Compared with traditional LEAD-ACID battery UPS, it has much longer lifespan and smaller size. Perfect Application: Network, data center, servers and workstations, control system, communication system and office etc. Main Features: Zero Transfer time True Double Conversion Online UPS, provide most comprehensive protect mission critical equipment from wide range power quality issues DSP Digital Control Based Advance DSP base digital control bring high performance of high input Power factor, low distortion , supply the load with perfect sine wave AC power supply Li-ion Battery Powered Provide up to 3x backup time with 50% dimension, comparing with regular Lead- acid UPS product Dry Contact control Interface for BMS Incorporated Dry Contact interface for BMS dominant control , for control of charging and discharging base on relay in-depth BMS information ModBUS interface with BMS Incorporated ModBUS(RS485) interface with BMS, to achieve precise battery information (voltage/soc/soh, etc) for better UPS behaviour prediction and backup protection control loop. Li-ion Battery Charger Constant current , Constant voltage, Floating, Turn-Off 4 state charger for Li- ion battery , open to customize the logical behavior for customer- specified battery pack Ultra Wide Input Mains range Strong compatible with ultra with electric environment, stay well with ultra wide range mains of 90V~300V, 40~70Hz ,dramatically reduce battery discharge , prolong battery life. Best Loading Capability Up to 0.9 Output Power Factor , 50/60 Hz Automatically adapting, selectable voltage , perfectly match all kind of application Genset Compatible Capable of work with wide range of Genset, isolate fluctuation and noise from Genset , provide stable and clean power supply to the user equipment. High Input power factor Thanks to digital controlled PFC Technology, >0.99 input power factor, effectively avoid power pollution , save energy expense for customer Reliable design Made with strong Glass fiber base (FR4) double side PCB, company with large span component, greatly improve reliability in harsh environment, Well designed ventilation and conformal coating , avoid dust accumulation ,improve resistant to corrosion. Open to customization Based on powerful controller and open architecture, the product is able to be customized to match need of integration of automatic system or intelligent supervisory system

These labels are paper-thin, adhesive, or invisible in plastic or fabric cover, to protect hard items such as books, cosmetics, jewelry, etc. RF Paper EAS security labels Punch Tag label soft

Minimum Order: 1000

EAS tag pin is Compatible with various EAS hard tags to stop remove the tags by force Stainless Steel Cap Plastic Cap Hard tag pins Buy from rfid tag manufacturers.

Minimum Order: 1000

Secure merchandise like spectacles, sunglasses etc. Help shoppers to try the products without being annoyed by the alarm device and minimize the impact on display. AM or RF available, easy to apply and remove. EAS optical tag Magnetic Locking Sunglasses security tag Mechanical Locking Secure merchandise like spectacles, sunglasses etc. Help shoppers to try the products without being annoyed by the alarm device and minimize the impact on display. AM or RF available, easy to apply and remove. Buy from rfid service providers.

Minimum Order: 1000

Lanyard security tag is Able to be applied to EAS hard tags, to enhance the hard tag solutions EAS lanyard With Pin Lanyard Come to buy retail anti theft devices.

Minimum Order: 1000

As a benefit denial solution, ink tag offers wide range from AM to RF in line with the environmental requirements. Warning the shoplifters with what will happen if the tags are being removed by force. Normally include non-shedding ink and warning print. EAS ink tag Specifications Smart ink security tag Ink Hard Pin Buy from rfid provider.

Minimum Order: 1000

Electronic Article Surveillance System As retailers search for a positive but unique customer shopping experience, we have developed a brand-new EAS (Electronic Article Surveillance) system to accommodate market demands. We named the new system AntennaLess. The major part of AntennaLess is designed to guard not only at entry/exit point, but also the location that needs to be more secured. Looking at more forms, we already designed types mounted under floor, overhead, and within any possible facilities. We believe the hidden EAS solution will gain more popularity but imbedded with more security features. EAS loss prevention Accessories Ontime EAS accessories are quality-enhanced and built on a high-standard production process, to consolidate with both high-performance Acoustic-Magnetic (AM) and Radio Frequency (RF) systems. The accessories include a great variety of hard tags, paper labels, pins lanyards, detachers, self-alarms, and related items, giving better protection and choices to the shopping environment. Shop anti theft system Antenna We answer the questions of how protective and how much values EAS systems are by providing better antennas and integrated accessories. By developing both RF and AM detection systems, we help our customers to find immediate impacts on merchandise protection, operation efficiency, and other asset management in various retail settings. Why Choose Ontime EAS EXPLORE NEW AREAS Studying the retail trend and looking ahead, we are moving fast and working with our partners to a new landscape to help retailers sell more and lose less. Come and get EAS for sale. REDEFINE EAS PRODUCTS Our team is striving to evolve current product lines to the more robust, cost- effective, and smart product ranges. By using technologies, our EAS products become more intelligent and user-friendly. A PLATFORM EMBRACE COOPERATION Work together and grow together is one of our faiths to success. By building such an open platform, we put our efforts to enhance the partnerships and dig into new business. EAS FAQs What is RF (Radio-frequency) Systems? Security tags that are tuned circuits consisting of an inductor and a capacitor. These security tags operate at a commonly used frequency of 8.2 MHz. Deactivation of these security labels or security tags is achieved by detuning the circuit or partially destroying the capacitor by using a strong electromagnetic field. What is AM (Acousto-magnetic) System? The AM system/antenna emit periodic tonal bursts at about 58 kHz causing the magnetic strips (of AM label) to vibrate and depending on the change on the magnetization will cause the EAS detection system or antennas to detect the change and sound an alarm. What is Source Tagging? Source tagging is the application of EAS security tags at the source instead of at the retail chain. For retailers, source tagging eliminates the intense labor required to apply the EAS tags to the merchandise. Source tagging allows the EAS tags to be concealed within the product packaging and more difficult to remove. What are Hard Tags? Hard tags are reusable security tags and must be removed at the Point-of-Sale. Once deactivated and removed they are saved for future application to merchandise, and then reactivated. What are Soft Tags? RF security tags that can be concealed in merchandise packaging. Due to their low cost they are used once ad disposable. What are RF Paper Labels? Security labels that are affixed to merchandise to deter shoplifters. The RF labels are usually small, inconspicuous and usually found inside the packaging of the merchandise. The process of placing the RF labels in the packing is known as Source-Tagging. Custom Electronic Article Surveillance System The Essence of An EAS System EAS technology is originated for retail industry to protect the merchandise andothe in-store assets from shoplifing and theft.The security tag or label will triggeran alarm at exit/entrance when the merchandise a customer take is unpaid andthe tag or label attached are not removed or deactivated. Ontime's Innovation Apart from the standardized products, our team dig deeply for retailer's insights, study on various retail environments to develop and tailor noticeably superior products and solutions that are innovative, low cost, and durable. We believe a perfect balance between security and shopper's experience. We work for lift-up for the shop's sales and security. Ontime's Commitment To advance a wide variety of solutions for the stores to reduce loss and improve profits. We have proven successes in supermarkets, fashion stores, department stores, convenience stores, outlets, etc. Buy from EAS system manufacturers.

Minimum Order: 1000

Eas security detacher is designed to release any type of hard tags with megnetic locking part inside Buy eas tag remover from rfid solution company.

Minimum Order: 100

This power supply is suitable for Agfa Anapurna Mw printers. This is Agfa original part. More Information Please Visit our website OFFICIAL STORE GAOLITOPRINTER com for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

The solid state frequency converter 50hz to 60hz adopts a relatively sealed structure, and the protection level can reach IP55. This solid state frequency converter is a high to low frequency converter. The static high frequency converter applications is very extensive. It is suitable for dust environments, high-temperature environments, low-temperature environments, corrosive environments,s and other dangerous environments such as combustible gas and explosion. Contact us and get more information on types of frequency converter. Parameters of the Static Frequency Converter PDF Voltage Range 1140V-3300V Power Range 1000kW-10000kW What is a Static Frequency Converter Static frequency converter is divided into AC-AC frequency converter and AC-DC- AC frequency converter in structure. It is divided into voltage source frequency converter and current source frequency converter from the nature of power supply. Static Frequency Converter Working Principle Static frequency converter is a kind of power electronic power supply device which can provide simultaneous change of frequency and voltage. It can be divided into two categories: indirect frequency converter and direct frequency converter. Indirect frequency converter first rectifies the power frequency AC power supply into DC with controllable voltage, and then converts it into variable frequency AC through inverter, which is also called AC-DC-AC frequency converter. Direct frequency converter converts power frequency AC into variable frequency AC at one time, so it can be called AC-AC frequency converter. Indirect frequency converter is widely used. Features of the Power Frequency Converter The power frequency converter has high-protection container structure; Solid state frequency converter has multiple output converter; Built-in lightning protection and surge protection; Solid state frequency converter is small in size and high in power density; High heat dissipation efficiency, low temperature and low noise of solid state frequency converter; The freezing environment can be cooled by refrigerant; Modular design is adopted inside the solid state frequency converter, which is good for mounting abd convenient for maintenance. Static Frequency Converter Applications Solid state frequency converter on fracturing equipment used to extract oil and shale gas. Fracturing truck should be used for various fracturing operations of oil, gas and water wells, and can also be used for hydraulic sandblasting, high-pressure hydraulic coal mining in coal mines, high-pressure hydraulic derusting in ships and other operations. Static stop frequency converter can be used to drive fracturing pump. Now the price of transmission substation equipment is low, anything you need, please leave us a message. The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, electrical control equipment, and power supply products.

We can supply high ingress protection motors for excavators, bucket wheel stackers, reclaimers at ports, and fracturing machinery for oil and gas. Features of the High Ingress Motor High insulation performance and large starting torque; Small size and light weight; Long service life. As a professional power control equipment company, we can offer kinds of power control equipment for sale, if you have needs, please contact us.