Power Supplies & Equipment

Suspension Clamp https://www.bosenpower.com/product-list-a , dss-and-opgw-preformed-suspension- clamp.html ADSS and OPGW Preformed Suspension Clamp Suspension clamp Suspension clamp is also called clamp suspension or suspension accessories. There are many different types and structures of suspension clamps, such as: double suspension set for ADSS, double suspension for OPGW, single suspension for OPGW, etc. What is the suspension clamp used for? The suspension clamp protects the conductor where the load is installed. Regardless of the conditions, suspension clamps can provide a safe and feasible mechanical connection, and they achieve this by providing sufficient longitudinal grip control. What are the types of suspension clamp? 1. Suspension Set for ADSS pre-twisted wire with single-and double-twisted wire two kinds of pre-design, single-storey pre-twisted threads within the file folder for the 400m distance connections, double the pre-twisted threads are generally used for large file from the folder (within 1000m) the connection between, may be based on actual need to select a different installation method.

Minimum Order: 1 bags

Preformed Tension Clamp https://www.bosenpower.com/product-list-a , dss-and-opgw-preformed-tension- clamp.html A , DSS and OPGW Preformed Tension Clamp What is preformed tension clamp? Preformed tension clamp is also called preformed dead end or dead end cable clamp. The raw material of preformed tension clamp is aluminum clad steel wire or galvanized steel wire, For communication ADSS optical fiber, OPGW cable. The unique pre-formed tension clamp design not only simplifies the installation, but also ensures the safety of the cable connection. Terminal cable clamps provide excellent performance to protect ADSS/OPGW/OPPC cables from stress points and prevent signal drops during transmission. What is the purpose of prefabricated tension clamps? Prefabricated tension clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles.

Minimum Order: 1 bags

Dead End Guy Grip https://www.bosenpower.com/product-list-pr , eformed-dead-end-guy-grip.html Preformed Dead End Guy Grip Some dead end guy grip information Application: The dead end guy grip is made of the same material as the strands they apply to, and is used to pull wire rods in the construction of power and communication lines. Installation: After the initial installation, the dead end guy grip can be removed and reapplied twice to re-tension the cable. If a dead angle needs to be removed after three months of installation, a new dead angle should be replaced. Species: The types of preformed dead end guy grip are dead end guy grip for stay wire, dead end guy grip for earth wire, dead end guy grip for conductor, dead ends for insulated cable, etc. Hebei Boersen Photoelectric Equipment Technology Co., Ltd. is a professional new technology enterprise which develop, manufacture and sale Preformed Fittings Equipment, ADSS & OPGW Preformed Fittings, Electric Preformed Fittings , Electrified Railway Fittings and Preformed Dead End Guy Grips. We have a large production base and a professional and independent foreign trade company to provide customers with high-quality services！

Minimum Order: 1 bags

Preformed Armor Rods https://www.bosenpower.com/product-preform , ed-armor-rods.html Preformed Armor Rods The armor rod is also called armour rod or rod armor. The armor rod is also called armour rod or rod armor. The armor rod is an accessory used for aluminum conductor, steel reinforced（ACSR, all-aluminum alloy conductors(AAAC) and aluminum clad steel conductor. Jingyoung armor rods play an important role in the armor rods transmission line and distribution line. The raw materials of the armor rod are aluminum wire, galvanized steel wire, and aluminum clad steel wire. The customer chooses the armor rod material according to the conductor’s raw material. The armour rod material should be similar to conductor surface material, avoiding corrosion between different elements. All types of armor rods come with a color code which helps identify the conductor size easily. The color code is also regarded as a mark during installation.

Minimum Order: 1 bags

PRODUCT DESCRIPTION Product Details 380V 440V 315KW 355KW 400KW Frequency Inverter VFD For Asynchronous Motor 1. Independent duct design Independent air duct design, effectively preventing dust entering inverter, causing short-circuit and other faults and improving reliability Use bigger air volume and long life cooling fan effectively reduces the internal temperature rise of the inverter and ensures reliable and stable operation of inverter. 2. Positioning Capability without External Devices Use an IPM motor to perform position control – without motor feedback. Electrical saliency in IPM motors makes it possible to detect speed, direction and rotor position without the use of external feedback devices. Positioning functionality without a PLC. Visual programming in DriveWorcsEZ eliminates the need for external controllers by giving the user the power to create customized functions such as position control. Product Images Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V Models and Specifications Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V Product Application Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V K-Drive VS Other brands Performance Common brands K-Drive Applicable motors Asynchronous motors Asynchronous /synchronous motors Starting torque 2.0Hz, 150% (sensor-less vector control) 0Hz, 180% (closed-loop vector control) 0.5Hz, 180% (sensor-less vector control) 0Hz, 200% (closed-loop vector control) Speed adjustable range 1:100 (SVC), 1:1000 (VC) 1:200 (SVC), 1:1000 (VC) Ambient temperature (no derating required) -10-40ºC -10-50ºC (for most of the models) Rated input voltage 208VAC-400VAC 208VAC-480VAC Communication Modbus RTU//ASCII Modbus RTU//ASCII Profibus-DP, CANopen, etc. Position control (fixed length, or angular positioning) × √ Field weakening control × √ Autotune online Online Online & Offline Short-time ramp-up Trip No trip Customized features (software and/or hardware) Unprocurable or no experience Procurable with rich experience How to install variable frequency inverter(vfd) The installation process for a Variable Frequency Drive (VFD) can vary depending on the specific model and manufacturer, so it's important to refer to the manufacturer's instructions and guidelines. However, here are some general steps that can be followed: Select a suitable location: Choose a location that is clean, dry, and well- ventilated, with adequate space for the VFD and any other associated components. Mount the VFD: The VFD should be mounted securely on a flat, vibration-free surface, and any wiring should be secured and protected from damage. Connect power: The power supply for the VFD should be connected according to the manufacturer's instructions, which typically involve connecting the VFD to a suitable AC power source. Connect the motor: Connect the motor to the VFD according to the manufacturer's instructions, which may involve wiring the motor to the VFD's output terminals. Configure the VFD: Follow the manufacturer's instructions to configure the VFD for the specific application, which may involve setting parameters such as maximum and minimum speeds, acceleration and deceleration rates, and overload protection settings. Test the VFD: Once the VFD is installed and configured, test it thoroughly to ensure that it is operating correctly and safely. This may involve running the motor at different speeds and loads and checking for any issues or abnormalities. It's important to note that the installation process for a VFD should only be attempted by qualified personnel who are familiar with electrical systems and safety procedures. Improper installation can result in damage to the VFD or motor, as well as serious injury or even death.

Product Description IP67 MP24 Series Customized Power Distribution System PE Orange Box Light Weight with Strong Body Application The new doghouse (portable distribution system) is ideal for tradeshow and exhibitions where a large number of convenience receptacles are needed over a wide area. The feed thru feature allows multiple boxes to be placed along one feed so that receptacles can be easily placed wherever needed. Doghouses are also popular in live event and audio applications where multiple amplifiers, speakers and other audio components require power while positioned on a stage or other venues. Features & Benefits Heavy-duty molded polyethylene enclosure is fully insulated and resistant to shock, impact and corrosion, preventing premature failure and minimizing equipment downtime Compact design will save space while in use and allow for easier transportation when stowed Choice of lightweight materials makes for a single-person lift at under 35 lbs. Rounded edges will not damage tents and fabrics Weather resistant, open-neutral GFCI protection helps prevent unsafe operation and nuisance tripping Hydraulic magnetic circuit breakers provide overcurrent protection that will not trip due to ambient temperatures All wiring and OCP devices located under sturdy, waterproof covers Stackable and compact for easy storage Heavy-duty extruded engineered thermoplastic enclosure is electrically insulated, resistant to shock, impact and corrosion End plate grips for easy handling in tight spaces Duplex receptacles are color coded for phase identification Markets Served Convention Center Audio Entertainment Live Events Tradeshow Exhibitions Specification Input Output Circuit Breaker 1 * 63A / 415V 5 pins CEE supply surface mounted plug 1 * 63A / 415V 5 pins IP67 CEE flush mouted socket 1 * 4P 63A 30mA RCD 1 * 32A / 415V 5 pins IP67 CEE flush mouted socket 1 * 3P 63A MCB 2 * 16A / 415V 5 pins IP67 CEE flush mouted socket 1 * 3P 32A MCB 2 * 16A / 415V 3 pins IP67 CEE flush mouted socket 2 * 3P 16A MCB 4 * 16A / 230V SCHUKO socket outlets 6 * 1P 16A MCB

500KW single phase 240/480VAC Off Grid Forming Inverter with 60Hz to 62.5Hz frequency shift dry contacts offered by us supports pure sine wave output. This product is equipped with in built MPPT solar charge controller(optional) for uninterrupted supply of solar power needed for smooth running of any solar system. All its parameters can be programmed easily to meet specific application requirement. 500KW Low Frequency Off Grid Pure Sine Wave Inverter has auto restarting function and it is suitable for off grid as well as for grid back up functions. This inverter also has LCD display arrangement with LED indicator based design for the convenience of operator.

Tesla battery input split phase 120/240VAC output off grid inverter 30KW UL1741&CSA22.2 with auto transfer switchoffered by us supports pure sine wave output. This product is equipped with in built MPPT solar charge controller(optional) for uninterrupted supply of solar power needed for smooth running of any solar system. All its parameters can be programmed easily to meet specific application requirement.Tesla battery input split phase 120/240VAC output off grid inverter 30KW UL1741&CSA22.2 with auto transfer switch has auto restarting function and it is suitable for off grid as well as for grid back up functions. This inverter also has LCD display arrangement with LED indicator based design for the convenience of operator.

50kw off grid inverter single phase 115Vac 400Hz for an airplane GPU offered by us supports pure sine wave output. This product is equipped with in built MPPT solar charge controller(optional) for uninterrupted supply of solar power needed for smooth running of any solar system. All its parameters can be programmed easily to meet specific application requirement.50KW Low Frequency Off Grid Pure Sine Wave Inverter has auto restarting function and it is suitable for off grid as well as for grid back up functions. This inverter also has LCD display arrangement with LED indicator based design for the convenience of operator.

1. Description of 2000W bidirection invertor outdoor portable power station: Product name: 2000W bidirection invertor outdoor Portable power station / portable power pack / portable power supply / ecoflow delta / solar charge portable battery station Main material: LifePO4 Battery32140 Weight: N.W.:19KG G.W.:20.5KG Color optional: Over 100pcs, the colour could be customized (AC output voltage and frequency are customized , according to different countries and regions.) 2. Specification of 2000W bidirection invertor outdoor portable power station 2 input-(conversion efficiency:＞90%) Rated Power:2000W, Peak 4000W 1. DC 1000W LifePO4 Battery32140 2. PV 400W Capacity:1680Wh /525000mAh Service and ambient temperature: Pure wave Input Temp.:0~40℃(32~104℉) Output Temp.:-10~60℃(14~140℉) Storage Temp.:-20~45℃(-4~113℉) 10 output-(conversion efficiency:85-93%) Cycle life >2000 1. USB 2x USB QC3.0 22.5,5V/4.5A, 9V/2A, 12V/1.5A(22.5W) V0 ABS+Aluminium housing 2. AC 2x AC,100-120V, 220-240V Product Size:338*245*345mm Package Size:400*305*440mm N.W.:19KG G.W.:20 , .5KG 3. DC 2x DC5521, 2-13V/10A, Peak120w 4. Type-C 1x PD100W 5V/2.4A, 9V/3A,12V/3A,15V/3A,20V/5A ,Peak100W1x PD27W 5V3A9V/3A 12V/2.25A,Peak27W 5. Car charger 1x 12-13V/10A,Peak120w IP63 cover for AC, XT60 connector 6. Wireless charger 5W. 7.5W. 10W. 15W Accessory: 1 x adapter+cable(1.2m)+1 x manual+1 x PV conver line(option) Over 100pcs, the color of handle, housing, window, plug cover could be customized. 3. Methods of Charging 2000W bidirection invertor outdoor portable power station There are two charging ports on this device. Please charge according to the port type. When the device is being charged, the charge power and battery level will be displayed on the screen. And when the battery percentage reaches 100%, the charging process will be stopped automatically. (1) lt takes about 6.5 hours to get this device fully charged using standard adapter. (2) lt takes about 8 hours to get this device fully charged using a 200W solar panel. FAQ for 2000W bidirection invertor outdoor portable power station Q: Does OEM OR ODM accepted? A: Yes, OEM and ODM are available. Q: Can I order a sample to check the quality? A: Yes, sample order is welcomed. Q: Do your products have any certifications? A: Yes, We have full range of certificates, like CE, RoHs, FCC, PSE, etc. Q: What’s the production capacity of your company? A: 10,000pcs per item every month. Q: How long is the warranty of your products? A: We offer one year warranty since the delivery of goods. Q: What’s the leading time for mass order? A: According to the quantity of the order, we will ship it for you as soon as possible. OEM 2000w Bidirection Invertor Outdoor Portable Power Station ADS2000 0OEM 2000w Bidirection Invertor Outdoor Portable Power Station ADS2000 1

12kw split phase 110/220Vac or 120/240Vac off grid inverter offered by us supports pure sine wave output. This product is equipped with in built MPPT solar charge controller(optional) for uninterrupted supply of solar power needed for smooth running of any solar system. All its parameters can be programmed easily to meet specific application requirement. 12KW Low Frequency Off Grid Pure Sine Wave Inverter has auto restarting function and it is suitable for off grid as well as for grid back up functions. This inverter also has LCD display arrangement with LED indicator based design for the convenience of operator.

Minimum Order: 1 bags

200-600vdc input rack mount off grid inverter Technical Features/Our Advantages With low frequency transformer, 100% full power output, can work 24hx7. High efficiency > 94%, low loss and long service life > 15 years. Mitsubishi IPM intelligent modular structure design, easy and low cost for future's maintenance, powerful protection for over load, short circuit, over temperature which is more safe and reliable. The DC input voltge range, output voltage, output frequency can be set. Two kinds of start mode: variable frequency start or step down voltage start, higher capacity to drive inductive load. AC bypass input(DC power priority or AC bypass power priority can be set) and RS485 monitoring optional. Wide voltage input range can be selected from 100-400VDC or 200-600VDC or 400-800VDC, off grid inverter can work without battery. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. Approved by European CE (EMC, LVD, UL1741, CSA22.2) certificate. Optional Function RS485 remote monitoring Can add AC bypass input complementary function Can built in solar charge controller or AC-DC charger Product Specifications DC Input DC input: 48/96/120/144/192/240/300/360/480/540/600Vdc AC Bypass Input: Optional AC Output Rated output power: 10kw Pure sine wave AC output voltage: 110/120/220/230/240/380/400/415/440/480VAC (optional) Output phase: Single phase or Split phase or Three phase Frequency: 50hz or 60hz Power Factor: >0.95 Inverter efficiency: >94% LCD Display Voltage accuracy: Load balancing<1%, Unbalance <5% THD: linear load, 2%, nonlinear load >3% No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps) Protections Overload 150% for 5 seconds, 120% for 35 seconds Input reverse polarity Under voltage Over voltage Output over current Short circuit Over temperature Fan cooled, Always on Short circuit: no automatic recovery. Restart required <50dB Operating temperature: -25 to 55 Celsius Humidity: 90% non-condensing Dimensions: Rack Mount Cabinet 482mm(Width) x 680mm(Depth) x 300mm(Height) or Stand Cabinet 550mm(Width) x 550mm(Depth) x 860mm(Height) Weight: 120kg

Minimum Order: 1 bags

10KW 120/240 AC split phase off grid pure sine wave inverter with a 360 vol Technical Features/Our Advantages With low frequency transformer, 100% full power output, can work 24hx7. High efficiency > 94%, low loss and long service life > 15 years. Mitsubishi IPM intelligent modular structure design, easy and low cost for future's maintenance, powerful protection for over load, short circuit, over temperature which is more safe and reliable. The DC input voltge range, output voltage, output frequency can be set. Two kinds of start mode: variable frequency start or step down voltage start, higher capacity to drive inductive load. AC bypass input(DC power priority or AC bypass power priority can be set) and RS485 monitoring optional. Wide voltage input range can be selected from 100-400VDC or 200-600VDC or 400-800VDC, off grid inverter can work without battery. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. Approved by European CE (EMC, LVD, UL1741, CSA22.2) certificate. Optional Function RS485 remote monitoring Can add AC bypass input complementary function Can built in solar charge controller or AC-DC charger Product Specifications DC Input DC input: 48/96/120/144/192/240/300/360/480/540/600Vdc AC Bypass Input: Optional AC Output Rated output power: 10kw Pure sine wave AC output voltage: 110/120/220/230/240/380/400/415/440/480VAC (optional) Output phase: Single phase or Split phase or Three phase Frequency: 50hz or 60hz Power Factor: >0.95 Inverter efficiency: >94% LCD Display Voltage accuracy: Load balancing<1%, Unbalance <5% THD: linear load, 2%, nonlinear load >3% No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps) Protections Overload 150% for 5 seconds, 120% for 35 seconds Input reverse polarity Under voltage Over voltage Output over current Short circuit Over temperature Fan cooled, Always on Short circuit: no automatic recovery. Restart required <50dB Operating temperature: -25 to 55 Celsius Humidity: 90% non-condensing Dimensions: Rack Mount Cabinet 482mm(Width) x 680mm(Depth) x 300mm(Height) or Stand Cabinet 550mm(Width) x 550mm(Depth) x 860mm(Height) Weight: 120kg

Minimum Order: 1 bags

DNP-10KW Rack Mount Off Grid Inverter 300V battery input split phase 120/240VAC output Technical Features/Our Advantages With low frequency transformer, 100% full power output, can work 24hx7. High efficiency > 94%, low loss and long service life > 15 years. Mitsubishi IPM intelligent modular structure design, easy and low cost for future's maintenance, powerful protection for over load, short circuit, over temperature which is more safe and reliable. The DC input voltge range, output voltage, output frequency can be set. Two kinds of start mode: variable frequency start or step down voltage start, higher capacity to drive inductive load. AC bypass input(DC power priority or AC bypass power priority can be set) and RS485 monitoring optional. Wide voltage input range can be selected from 100-400VDC or 200-600VDC or 400-800VDC, off grid inverter can work without battery. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. Approved by European CE (EMC, LVD, UL1741, CSA22.2) certificate. Optional Function RS485 remote monitoring Can add AC bypass input complementary function Can built in solar charge controller or AC-DC charger Product Specifications DC Input DC input: 48/96/120/144/192/240/300/360/480/540/600Vdc AC Bypass Input: Optional AC Output Rated output power: 10kw Pure sine wave AC output voltage: 110/120/220/230/240/380/400/415/440/480VAC (optional) Output phase: Single phase or Split phase or Three phase Frequency: 50hz or 60hz Power Factor: >0.95 Inverter efficiency: >94% LCD Display Voltage accuracy: Load balancing<1%, Unbalance <5% THD: linear load, 2%, nonlinear load >3% No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps) Protections Overload 150% for 5 seconds, 120% for 35 seconds Input reverse polarity Under voltage Over voltage Output over current Short circuit Over temperature Fan cooled, Always on Short circuit: no automatic recovery. Restart required <50dB Operating temperature: -25 to 55 Celsius Humidity: 90% non-condensing Dimensions: Rack Mount Cabinet 482mm(Width) x 680mm(Depth) x 300mm(Height) or Stand Cabinet 550mm(Width) x 550mm(Depth) x 860mm(Height) Weight: 120kg

Minimum Order: 1 bags