Power Supplies & Equipment

Auto Recovery 36W 24V LED Strip Light Power Supply IP33 Waterproof Led Tape Light Power Supply SAA Certified 36W 24V For Led Signs Protection: Open circuit Over load Short circuit Over temperature Safety Standard: Safety: IEC61347-1, IEC61347-2-13; Harmonic: IEC61000-3-2 EMI: IEC55015; EMS: IEC61547 Specification details: Model JSP-24036 Rated load power 36W Output Voltage 24V Output Current 1.5A Input Voltage range 100-240V Withstand 2000V PFC >0.7 Dimmable No Dimension(mm) L140xW45xH28mm Efficiency 86% Frequency 50/60HZ Ripple 300mV Max Electronic wire request Teminal blocks Over loading protection 115%-125% hiccup mode, auto-recovery Over heat protection <85°C hiccup mode, auto-recovery Over voltage protection 115%-125% hiccup mode, auto-recovery Setup, rise, hold up time 200ms, 100ms, 20ms Isolation resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Working temperature and humidity -10℃~+60℃(Refer to output load derating curve),indoor or dry Store temperature and humidity -20℃~+85℃, and dry condition Certification SAA CE ROHS Warranty 3 years Input plug available AUS PLUG, EU PLUG, US PLUG 1. If without specia explanation, all specifications are measured at an input of 220VAC, rated load, ambient temperature of 25 ° C . 2. Ripple & Noise Measurement Method: Use a 12 '' twisted pair, and the terminals are connected in parallel with 0.1uF and 47uF capacitors and tested at 20MHz bandwidth. FAQ: Q1. Can I have a sample order for products? A: Sure, we welcome sample order to test and check quality. Mixed samples also acceptable. Q2. What about the lead time? A: Samples needs 1-3 days, mass production time needs 1-2 weeks Q3. Do you have any MOQ limit for led light order? A: 1pc for sample checking is available Q4. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q5. How to precede an order for products? A: 1, Let us know your requirements or application. 2, we quote according to your requirements or our suggestions. 3, Customer confirms the samples and places deposit for formal order. 4, Production arranged. Auto Recovery 36W 24V LED Strip Light Power Supply IP33 Waterproof 0 Auto Recovery 36W 24V LED Strip Light Power Supply IP33 Waterproof 1

Explosion-proof distribution cabinet. Explosion-proof distribution cabinet has function for explosion prevention. These are explosion-proof distribution cabinet, explosion-proof power cabinet,explosion-proof & corrisive-proof cabinet. Usage: For illumination widely used in petrochemical plant, Petrol platform, gas station, oil pump room, transfer station etc. various inflammable and explosive locations. 1 area, 2 area explosion gas environmental, 21 area,22 area Combustible Dust Environment.

Minimum Order: 1 bags

Photovoltaic grid-connected cabinet. Description: It is a appratus connected photovoltaic station with electric station. It is termination between photovoltaic system and electric station. Function: 1. Power isolation function. Fix isolator, can cut line when repair. 2. Function of short circuit protection. Fix fuse on series-connected cell for prevent short circuit. 3. Electric energy metering. Can fix watt-hour meter for caculate battery. 4. Function of Power-on indication. Can fix indicator lighting, voltmeter, ammeter. Indicator power status, inform the operation. 5. Lightning protection. Fix lightning protection components on output of cabinet for prevent damage from lightning.

Minimum Order: 1 bags

Description: SUS with coating Control cabinet made from USU201,304,306. SUS304 material is widely used. It has anti-corrosive, anti high temperature, good for manufacture. Advantage: 1. The cabinet is extra strong, good appearance and SUS with brush finish. 2. Strong protection.SUS material with coating can prevent weathering & corrosion. 3. The case body and door earth connection. 4. Adopt closing unit, the unit separete with other unit and locked. Meet electric energy metering, prevent electric larceny. 5. Top & bottom of case fixed respiratory appratus,formed convection wind, keep components drying and reduce temprauture.

Minimum Order: 1 bags

Desription: ABS/PC full control cabinet made from ABS engineering plastics, transparent panel made from PC material. Used in electromagnetic valve control in field. Funiction: Control the inlet valves, outlet valves, backwash valves, mud valves, aeration valves ON/OFF. Can switch romote controlling. Usage: The cabinet used in site control for waste-water treatment plant. Components: transparent double door (IP65,PC,ABS), lubricator combination (air filter, relief valve, oil mist), fuse, intermedia relay, semi-conductor indicator, silencer, electromagnetic valve,valve base, rotary button. Ambitions: 1. The attitude below 1000m 2. Ambition temperature: -25℃ ~ +60℃. 3. Wind speed below 35m/s. 4. Air humidity below 90%. 5. Earthquake horizontal acceleration below 0.4m/s. 6. No vibration in installation place.

Minimum Order: 1 bags

water treatment automatic control system is control the treat processing automatically. The water quality will meet environmental water quality standard. When central control room transmit command,the parameter (wanter quality parameter, flow quantity, water level) will transfer to central control room. Function as below: 1. Control operation Can operate the equipment on line in Central control room. Start/Stop a equipmentt, adjust output, fix PLC parameter. 2. Display function. Display the equipment running status and parameter with graph. 3. Data management. Established history data base and save original data according runningg parameter for analysis. Cam compare and analysis live data & history data. 4. Alarm function When the analog quantity (current, voltage, waterlevel) over centain range, it can alarm according requirement. 5. Printing function. Can print form, graph, issue, alam issue.

Minimum Order: 1 bags

The sewage treatment control system The control system divided 3 layers structures: The first layer is on-site operation. The second layer is supervisory computer monitoring control software. The third layer is supervisory computer off-line & PLC running automatically. On-site operation is convenient for device debugging & maintenance. If the equipment switch to manual operation, the equipment will not controlled by PLC, it only operated from on-site. Supervior computer monitoring control is good for contol central center operation.for each equipment, it can out of PLC control and only operated by central control room. PLC running automatically can control all equipment automatically. It controlled all waste-treatment process. It can work automatic even if PLC & supervisor computer out of communication. The hardware from Siemens S7-300 PLC, inverter, soft-starter. Software from GM. Busline combinated Profibus-DP & Profibus-FMS. It not only transfer the data speed but also data consistency.Inverter & soft-starter work combinated to run the waste water disposal pump,water-level tracking, keep water-level same as setting value. Supervisor computer room will complete the mission of operator & engineer.Operated by chief operator, operator in the daily time. Operator can operate after authorized. Engineer can open & operate respective function, other people cannot this layer for operation.Operator use muti-screen display,such as eight-screen display.It can choose any screen for controlling.Auto-screening available, screening time can be adjusted. Prepared a Remote monitoring station in Contol centre, communicate with central control room in sewage plant. Station use muti-screen display,such as four-screen display.It can choose any screen for controlling.Auto-screening available, screening time can be adjusted. Most of user interface are planar graph, some of are section graph & relative function (manual or auto, working status setting, time setting, parameter setting, upper & bottom limitation, alarm etc). The alarming information, auto- running whether can meet sheme, will have popup & voice guide. Running status tablet showing equipment ON/OFF, bump voltage/current, instrument parameter, total value (electricity, water, mud, gas),Operation parameter (unit electricity consumption, unit gas consumption, all electricty consumption). Interface including waster-water treatment automatic control system graph, waste-water processing graph, waste-water plant graph, inflow pretreatment section, pump working graph, hydrolytic tank, Sludge treatment operation graph, SBR pond, blowing machine running graph, converting station, dehydration room,well house running graph.ect.

Minimum Order: 1 bags

Sewage Pump Station Description: Sewage flow equipment via gravity flow and collet before sewage pump lifted reach a certain height. Usage of Sewage lift pump: lift the sewage that can be gravity flow. Lifting pump including pump, water pond, pump house. Various of pump in the pump house, most of are centrifugal. And it has dry pump, Submersible Sewage Pump according fix method. Dry pump has vertical pump, horizontal pump. Sweage pump has two, fixed in sewage, fixed in air. The usage of water collection tank is adjust tank water & draw water, avoid Pump starts frequently. 1. The location of water collection tank should consider pump repair, base of pump repair.(swage pump, collection tank should run separately). 2. frequency adjustment for water yield & water inflow, good performance. 3. The location of water collection tank shouldd consider maintenance & clearing. For closed tank, we should fixed vent hole,ventilator. 4. Clean up the debris from collecting pond, keep water pump running normall. For water pump running in water collecting tank should consider: 1. Keep water inflow & water lifting same. 2. Keep water collection tank high level working. 3. Avoid open & close pump frequency. 4. At least prepared a pump for reserve. 5. Average holding time for open & close of each pump. Because of geology & topography limitation in sewage plant, we must lift the sewage pump for a certain height to gravity flow before sludge treatment. Usage for sewage pump station: Usage of Sewage lift pump: lift the sewage that can be gravity flow. Lifting pump including pump, water pond, pump house. Xiangke undertaking below electric automation project: 1. landfill seepage treatment. 2. Sewage plant. 3. Drainage station. 4. Waste gas treatment. 5. Reclaimed water technology. 6. Pure water technology. 7. Constant pressure water supply 8. Energy saving of central air conditioning water 9. Constant temperature and humidity & energy saving.

Minimum Order: 1 bags

Description: Constant temperature and humid PLC control cabinet widely used in workship, exhibition, archive room, laboratory, network room need constant temperature and humid. Xiangke constant temperature & humid system saved much energy, reduced compressor working time and extended service life compared with traditional air conditional. it has good stable, Strong anti-interference ability.The system fixed warm humidity transmitter as digital transmission.long transmission distance, free of electrostatic interference. Control precision. System hardware structure: The core of system is Siemens PLC, touch screen as human-computer interface. the temperature and humility transfer by sensor, It is processed into digital signal by single chip, via RS485 wire transfer to PLC, and data processing, and controlled via PID. Keep constant temperature and humility controlling compressor, humidificatin valve,fan valve. The procedure of control for constant temperature and humid: There are 5 method from PLC controlling. 6. monitor status. The system only reads the temperature and humidity of the environment,without controlling. 7. Hand control status.when compressor forced operation need hand control.You can touch compressor 1, compressor 2 for start. 8. Automatic humidification, When start this method, the system will work according fixed upperlimit & lowerlimit. 9. Automatic temperature control. When start this method, the system will work according fixed upperlimit & lowerlimit. At the same time, monitor the outdoor temperature is less than 14 ℃ 10. Circulation working: combination method 3 & method 4. Temperature controlling then humidification controlling.

Minimum Order: 1 bags

GCK Low-Voltage feed panel. Description: GCK low-voltage feed panel suit for AC 50Hz, Rated voltage 380V low-voltge system as feeding,busbar, lighting,motor control & power compensation.Including PC & MCC. The cabinet can design stable cabinet or drawer cabinet for different customer requirement. Each unit divided different chamber with panel.Never interfere each other. Unit chamber has 3 structure, drawer structure, insert structure,stable structure. Easy repair & safty, reduced outage period. Drawer cabinet easy operation, convenient, exchange easily. Top of cabinet fixed main busbar & neutral busbar. Bottom of cabinet protect ground bus.Branch busbar has four lines. Usage: Use in power station, petrochemical, metallurgy, textile enterprises.Power distribution for three-phase alternating current 50-60Hz, voltage 380V.

Minimum Order: 1 bags

Low-voltage distribution cabinet Description: GGD Low-voltage distribution cabinet is a new design according senior management in Energy authority,most of power user, power design department,with safety, economy, reasonable.Cabinet with characteristics, high short circuit breaking capacity, high dynamic multiple, Flexible electrical scheme, easy conbinatioon, Strong practicability, new constructure, high protection. It is new generation for low-voltage complete switch cabinet. Application: Widely used in power station, transformer substation,industrial enterprises, 50Hz, rated voltage 380V,rated current 3150A power distribution system controlling, distribution and transfer.

Minimum Order: 1 bags

MNS low-voltage distribution cabinet. Feature: 1. MNS frame is a combined constructure, the framework made from C steel. All constructure parts galvanised and completely by hexagonal bolt. Assembly door, clapboard, bracket,busbar for a cabinet.Inner dimension, components dimension, chambers dimesion changed from E=25MM. 2. MNS distribution cabinet has 3 chambers, Horizontal bus room (back parts), , small drawer room (front parts), cable room (bottom). Separated from each room with High strength flame retardant plastic functional board.Metal plate with vent between upper drawer & bottome drawer, prevent flashover & shorted circuit because of components breakdown. 3. MNS low-voltage distribution cabinet can meet various of requirement: upper in & upper out, bottom in & upper out, bottom in & bottom out. 4. Compact desigh: accommodate more functional units in a smaller. 5. Structural components versatility, Flexible assembly, module as E-25mm. Any constructure and draw type unit can combinated for meet system design. 6. With high strength flame retardant material, high insulation strength plastic panel for protect bus line. 7. The mechanical innterlock device from drawer meet standard, which has position connect, test, separate. It is safe and reliable. 8. Standard module design, Can divide units: protect, operate, transfer, contro, adjust, test, indicator. Can free assembly. 9. Use High strength flame retardant engineering plastics for safty protection feature. 10. High standardization, universalization, convenient to assemble. Reliable quality assurance. 11. Protection degree can be available according working environmental. 12. Continuity and reliability of equipment protection Parameter: Electric data: Rated voltage: 380VAC 3~、660VAC 3~ Rated insulated voltage: 690VAC 3~;1000VAC 3~； Rated frequency: 50Hz or 60Hz. Main busbar: 3150A, Rated peak withstand current IPK 105KA, Rated short-time withstand current ICW 50KA. Distribution busbar: 2000A, Rated peak withstand current IPK 105KA, Rated short-time withstand current ICW 50KA. Cabinet height: 2200mm, Width: 400, 600,800,1000,1200mm. Cabinet thickness: 400mm,600mm,800mm,1000mm,1200mm. Module: E=25mm Mateial for small chamber: aluminium coated zinc plate

Minimum Order: 1 bags

Electric power distribution cabinet: Description: The cabinet suit for AC 50Hz, rated voltage 380V, 3-phase 4 wire system, 3- phase 5 wire system motor & power distribution in architecture. XL-21 power distribution cabinet conform to IEC439-1,GB72511.1-1997 Low-voltage switchgear and controlgear assemblies. Normal ambient condition 1. The attitude below 2000M. 2. Ambition temperaturer -5℃ ~ +40℃; the average temperature below 35℃ in 24 Hours. 3. Relative humidility below 50% in 40℃, but can be 90% in 20℃.But dewing must consider because of temperature changing. 4. NO Conductive dust and chemically corrosive gas, no conflagration, NO explosive dangerous, No shake.

Minimum Order: 1 bags

Low-Voltage capacitance compensation cabinet. Description: Low-Voltage capacitance compensation cabinet fix famous brand components. Long operation life, stable performance,high security.Improve the power factor of the loads.reduced reactived power, save energy, improve limited load. Functional: 1. Reducing the transmission of reactive energy in distribution lines. Reduce the power loss of the line. 2. Develop potential projected capacity, Increase the output of equipment, Improve the utilization of equipment. 3. power-factor improvement. inductive reactive power compensation.save energy. 4. Improve voltage, improve electric energy. 5. Can display grid power factor, can compensation with reactive power. 6. With function of exchange manual & auto. 7. Output: turn on first, turn off first. Recyle. 8. Lead, lag, over indicator. Components: fuse-switch-disconnector, distribution measure and control instrument, intelligent power capacity, intelligent power meter, current transformer, metal zinc oxide arrester, temperature controller, fan, intermediate relay, fuse, indicator, current terminal.

Minimum Order: 1 bags