Plastic Products

The thick wall pipe with flame retardant tape is composed of polyolefin flame retardant material and hot melt adhesive. The outer layer is polyolefin and the inner layer is hot melt adhesive. It has good insulation, sealing and waterproof, mechanical wear resistance, moisture-proof and impact resistance. It is mainly used for insulation protection of high voltage cable middle and terminal joints with fire retardant requirements, insulation protection of various buses, anticorrosion of various pipes, moisture-proof, waterproof and wear-resistant, etc. Product features ■ UV resistant ■ shrinkage temperature: ≥ 70 ℃ ■ final shrinkage temperature: ≥ 125 ℃ ■ operating temperature: 45 ℃ ~ 125 ℃ ■ shrink ratio: 3:1 ■ thick wall and outer layer flame retardant

Minimum Order: 1 bags

Widely used in wire connection, solder joint insulation protection, wire end treatment resistance, insulation protection of capacitors, wire mark and end metal tube, rod rust protection, antenna protection.

Minimum Order: 1 bags

Yellow green heat shrinkable tube is widely used for identification of ground wire in wire harness or cable, identification of special cable, generatrix or pipe, etc., as warning and identification - Heat shrinkable ratio: 2:1, 3:1 - Initial shrinkage temperature: ≥70℃ - Complete shrinkage temperature: ≥125℃ - Operating temperature: -55℃ ~ 125℃ - Low smoke, soft and flame retardant - Environmental protection standard: RoHS - Standard color: yellow and green

Minimum Order: 1 bags

Glass fiber tube is also called glass fiber tube, glass fiber sleeve, which is a special glass fiber sleeve which is made of glass fiber woven into pipe and treated by high temperature setting process; Glass fiber tube is divided into silicone glass fiber tube and silicone rubber glass fiber tube. Silicone glass fiber tube, also known as silicon casing or self quenching tube, is made by weaving alkali free glass fiber into a tube and then dip and coat silicone resin, and heat and cure it. The silicone rubber glass fiber tube is composed of high quality silicone rubber layer and glass fiber braid layer, which can be divided into two types: inner rubber outer fiber glass fiber tube and inner fiber outer rubber glass fiber tube. According to the voltage resistance grade, fiberglass pipes can be divided into 1.5kV glass fiber pipe, 2.5KV glass fiber pipe, 4KV glass fiber pipe and 7kv glass fiber tube.

Minimum Order: 1 bags

Product Features: Silicone Heat Shrinkable Tube is made of silicone with heat shrinkage property after modification of silicone rubber. It not only has excellent performance of general silicone rubber tube, such as high temperature resistance, high pressure resistance, soft and elastic property, but also has heat shrinkable performance, good mechanical property of stabbing damage resistance, and long-term use without aging. Application Field: generally used in the insulation and protection of instruments, household appliances, aerospace, military industry, automobile manufacturing, electronic components, transformers, motors, etc. -Color: black, white, multicolour -Shrinkage ratio: 1.7:1 -Working temperature: 55 ℃ ~ 200 ℃ -Shrinkage temperature: above 90 ℃

Minimum Order: 1 bags

Fluororubber heat shrinkable tube is made of fluororubber and polymer elastomer by radiation modification. It can be used at high temperature for a long time. It is resistant to diesel oil, aviation fuel and high temperature fluid. It can be used for the protection of military vehicles, high-speed rail cars, ship equipment or commercial cable terminals, separation joints, etc. Product features: - heat shrinkable ratio: 2:1 - initial shrinkage temperature: ≥ + 100 ℃ - complete shrinkage temperature: ≥ + 175 ℃ - operating temperature: - 55 ℃ ~ + 200 ℃ - Oil and solvent resistant, high flame retardant, soft and elastic - environmental protection standard: RoHS - standard color: Black

Minimum Order: 1 bags

Flame retardant heat shrinkable tubes are made of radiation crosslinked polyolefin materials with excellent physical, chemical and electrical properties. Their main functions are electrical insulation of connectors, anti rust and anti-corrosion of solder joints, mechanical protection and wiring harness. They are widely used in electronics, communication, automobile, ship, aircraft manufacturing and other fields Product features ■ Heat shrinkable ratio: 2:1 ■ High flame retardant and environmental protection ■ shrinkage temperature ≥ 84 ℃ ■ Final shrinkage temperature: ≥ 120 ℃ ■ Service temperature: - 55 ℃～ 125 ℃ ■ Standard colors: black, white, red, green, blue and other ten international standard colors

Minimum Order: 1 bags

Flame retardant heat shrinkable tubes are made of radiation crosslinked polyolefin materials with excellent physical, chemical and electrical properties. Their main functions are electrical insulation of connectors, anti rust and anti-corrosion of solder joints, mechanical protection and wiring harness. They are widely used in electronics, communication, automobile, ship, aircraft manufacturing and other fields Product features ■ Heat shrinkable ratio: 2:1 ■ High flame retardant and environmental protection ■ shrinkage temperature ≥ 84 ℃ ■ Final shrinkage temperature: ≥ 120 ℃ ■ Service temperature: - 55 ℃～ 125 ℃ ■ Standard colors: black, white, red, green, blue and other ten international standard colors

Minimum Order: 1 bags

The double wall heat shrinkable tube with adhesive can shrink at lower temperature, external insulation, flame retardant, and can buffer mechanical strain and sealing property. It is mainly used in the case where the protective material does not need to be able to withstand higher processing temperature. The general shrinkage rate of double wall shrink tube with adhesive is 3 to 1, the working temperature is from -45 ℃ to 125 ℃, the shrinkage temperature is ≥ 60 ℃, the temperature of shrinkage used is ≥ 105 ℃, flame retardant, UV proof and very soft. The double wall shrink tube with rubber of Huawoer heat shrinkable material Co., Ltd. all conform to the environmental protection standard and passed professional testing.

Minimum Order: 1 bags

Huawoer heat shrinkable tubes are widely used in wire connection, solder joint protection, wire ends, harness and electronic components protection and insulation treatment; Fitness equipment parts and steel structure surface protection; Anti rust and anti-corrosion treatment of related products; Identification of wires and other products. Through UL, CSA certification, in line with ROHS environmental requirements.

Minimum Order: 1 bags

The double wall heat shrinkable tube with adhesive can shrink at lower temperature, external insulation, flame retardant, and can buffer mechanical strain and sealing property. It is mainly used in the case where the protective material does not need to be able to withstand higher processing temperature. The general shrinkage rate of double wall shrink tube with adhesive is 3 to 1, the working temperature is from -45 ℃ to 125 ℃, the shrinkage temperature is ≥ 60 ℃, the temperature of shrinkage used is ≥ 105 ℃, flame retardant, UV proof and very soft. The double wall shrink tube with rubber of Huawoer heat shrinkable material Co., Ltd. all conform to the environmental protection standard and passed professional testing.

Minimum Order: 1 bags

The double wall semi-rigid heat shrinkable end is composed of semi-rigid polyolefin and hot melt adhesive. The outer layer is radiation crosslinked polyolefin and the inner layer is hot melt adhesive. One end of the product has been pre contracted and sealed, which has double effects of insulation and sealing. It is used for mechanical protection, sealing, waterproof and moisture-proof and environmental protection of power cables, wires and harness ends. Product features ■ shrinkage temperature: ≥ 80 ℃ ■ Final shrinkage temperature: ≥ 125 ℃ ■ Service temperature - 45 ~ 110 ℃ ■ Heat shrinkable ratio: 4:1 ■ Standard color: Black ■ Voltage class: medium and low voltage power cable (35kV and below) ■ Purpose: radiation crosslinking heat shrinkable sealing cap is suitable for the end waterproof, insulation and protection treatment of power cable or communication cable. The mouth end is coated with high-performance hot-melt adhesive. When heated, the sealing cap can shrink, and the glue melts. It is tightly bonded to the surface of the cable, playing an excellent waterproof, insulation and protection effect.

Minimum Order: 1 bags

4:1 Semi Rigid Dual Wall Tube for Automotive Wiring, the semi-rigid double wall tube for automotive wiring harness is composed of polyolefin and hot melt adhesive. The outer layer is semi-rigid polyolefin, which has high wear resistance and strength. The inner hot melt adhesive has low melting point, can buffer mechanical strain and has strong sealing property. It is mainly used in electronic equipment wiring connection, automobile wiring harness, home appliance wiring harness, wire and cable branch, metal pipeline, wire and cable repair, submersible pump wiring and other occasions that need to be sealed. Product features ■ Wear resistant ■ UV resistant ■ shrinkage temperature: ≥ 70 ℃ ■ Final shrinkage temperature: ≥ 125 ℃ ■ Service temperature: - 45 ℃ ~ 125 ℃ ■ Heat shrinkable ratio: 4:1

Minimum Order: 1 bags

4:1 Low Temperature Flame Retardant Dual Wall Tube for Automotive Wiring, the outer layer of polyolefin is insulating and flame retardant material, and the inner layer of hot melt adhesive can buffer mechanical strain and has strong sealing property. The main functions are sealing, water-proof, anti-corrosion, air leakage and multi strand wire harness. It is mainly used for wire connection of electronic equipment, automobile wire harness, home appliance wire harness, wire and cable branch, metal pipeline, wire and cable repair, submersible pump wiring and other occasions that need to be sealed. Product features ■ The outer layer is flame retardant and UV resistant ■ Shrinkage temperature: ≥ 60 ℃ ■ Final shrinkage temperature: ≥ 105 ℃ ■ Service temperature: - 45 ℃ ~ 125 ℃ ■ Heat shrinkable ratio: 4:1 ■ Color: Black (other colors can be customized)

Minimum Order: 1 bags