Plastic Tubes

HDPE Steel belt reinforced spiral bellows HDPE pipe Description The steel belt reinforced polyethylene (PE) spiral corrugated pipe is a new type of bellows with high-density polyethylene as the basic material, the outer layer is spirally wound in the wall layer, and the steel plate is reinforced with hollow ribs. In addition to the corrosion resistance, smooth inner wall and low flow resistance of ordinary plastic pipes, it has a steel ring as a hollow surrounding structure of the reinforcement, so it also has a ring degree of more than 12.5KN/m2 (spiral winding). Hollow wall polyethylene can only reach 8KN/m2 ring steel) and high strength and toughness, light weight (40% lighter than spiral wound hollow wall polyethylene pipe), impact resistance, not easy to break, no leakage, etc. Features, so it is widely used in drainage, sewage, agricultural irrigation, coal mine ventilation, chemical, communications cable sheathing and other fields. Because of its light weight and convenient transportation and installation, it reduces the labor intensity of construction workers and reduces the cost of the project. It is an ideal substitute for concrete pipes and traditional drainage plastic pipes.

HDPE Pipe Fittings HDPE Pipe Description Features 1.Non-toxic Manufact , ured by virgin materials which is non-toxic, tasteless and never scaling, it could effectively improve the water quality. 2. Corrosion resistance High resistance to various types of chemicals. No electrochemical corrosion. 3. No Leakage HDPE pipe and fittings are welded in the ways of butt fusion, socket fusion and electrofusion. The strength of joint point is higher than the tube itself 4. Higher flow capacity The smooth inner wall is easy for pipeline transportation. Under the same condition delivery capacity can be increased by 30% 5. Convenient for construction and installation HDPE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation. 6. Lower maintenance costs HDPE pipe fittings are not only convenient to transport and install, but also reduce the worker's labor intensity and improve work efficiency. 7. Longevity 50 years' service lifespan under reasonable condition. 8.Recycled and environment-friendly.

HDPE Irrigation Pipe HDPE pipe is widely used in the field of sewage, water supply, drainage and water transportation attribute to its high strength, high temperature resistance, corrosion resistance, non-toxic and wear-resistant. The irrigation pipe made from PE material contains low density PE pipe, medium density pe pipe and high density PE pipe As the Pe polyethylene pipe has the characteristics of wear resistance, acid proof, corrosion resistance, high temperature resistance and high pressure resistance, it gradually replaced the position of the traditional pipe such as steel pipe and cement pipe, especially for its light weight and convenience to install and move, it is the first choice of the new material. Features: 1. Good hygienic performance: heavy metal salt stabilizers are not added to the Pe water spray irrigation pipe, the material is non-toxic, no fouling layer and the bacteria are not bred, it well solves the secondary pollution of urban drinking water. 2. Excellent corrosion resistance: excluding a few strong oxidants, it is resistant to corrosion of various chemical media and without electrochemical corrosion. 3. Long service life: under the rated temperature and pressure condition, the sprinkler irrigation polyethylene water supply pipeline can be used safely for more than 50 years. 4. Better impact resistance: PE irrigation water supply pipe has good toughness and high impact strength. Even if heavy weight directly passes through the pipeline, it will not lead to pipeline rupture. 5. Reliable connection performance: The strength of heat fusion or electrofusion interface of PE irrigation water pipe is higher than that of the tube and the joint will not be broken by the action of the soil movement or the active load. 6.Good construction performance: light weight, simple welding process, convenient construction and low comprehensive cost.

The structure of perforated infiltration pipe and gravity perforated infiltration pipe is not very different, the whole drainage system is composed of rainwater bucket, rainwater suspension pipe, PE perforated infiltration pipe, rainwater buried pipe, and PE perforated infiltration pipe why the overhead drainage, the core lies in the rainwater bucket, PE perforated infiltration pipe rainwater bucket has a good rectification function, rainwater bucket in its rated design flow is in the submerged drainage state, so there is no infiltration of air bubbles. So there is no problem of infiltration of air bubbles. On the other hand, in the PE perforated infiltration pipe because the water entering the perforated infiltration pipe is sufficient, so there is no gas mixed in it, so when the water flows, it does not produce turbulence, the formation of turbulence will lead to two evils, one is in the pipeline will produce a loud sound and vibration. Perforated infiltration pipe PE perforated infiltration pipe has very strict requirements for construction, and only a high quality construction plan can ensure the timely and effective drainage of the whole system when heavy rain comes.

HDPE Mining Tailing Pipe PE mining pipe special raw material not only has excellent long-term compressive strength, but also has excellent resistance to slow stress crack growth and fast stress propagation. HE3490-LS is black PE100 pipe special material, it also has excellent anti-sagging performance. In addition to outstanding antistatic and flame retardant properties, this pipe also has the advantages of high strength, good processing performance, good environmental adaptability, excellent stress cracking resistance and good creep resistance. HDPE Mining Pipe Features: 1. Strong Corrosion Resistance. The wear resistance of HDPE pipe is stronger than ordinary steel pipe,it is about 4 times than normal steel. 2. No-scale, small frictional resistance and low energy consumption. 3. Light weight, the weight of HDPE pipe is only about 1/5 of the ordinary steel pipe And HDPE pipe can be cut and welded at will. It is convenient to remove, install and repair.

HDPE Cables Protective Pipe We provide you with high-end quality of power engineering pipe system, covering the HDPE conduit, MPP electrical conduit and other product series. Diligently build quality projects an electrical manufacture customized power engineering pipe network products to satisfy your distinct requirements. HDPE Cables Protective Pipe Features: 1. Non-toxic. The HDPE material is non-toxic and tasteless. It belongs to green building materials. 2. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction. 3. Good resistance ability for scratch HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency. 4. Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation. 5. Long service life: it can be used for 50 years under rated temperature and pressure design. 6. Reduce operation and maintenance costs. High-density polyethylene pipe is not only convenient for transportation and installation, but also greatly reduces the labor intensity of workers and improves work efficiency.

MPP Cables Protective Pipe Trenchless modified polypropylene(MPP) power cable protective pipe is made by modified polypropylene as the main raw material associated with special formula and processing technique to make a new type composite pipe. It has much advantages of high strength, good high temperature resistant performance, easy installing, convenient construction, cost savings and so on. Description The MPP power cable protective pipes features could be highlighted as a trenchless tube, which conforms to the development requirements of modern cities and is suitable for buried depth of 2-18 meters.The trenchless construction technique has the characteristics of non-pollution, no impeded traffic, small damage to the underlying structure, secure construction, short cycle, low construction cost, ensuring the reliability and security of the pipe network, reducing the failure rate of pipe network and so on. It has remarkable social and economical benefit and also greatly improved the city environment. The MPP power cable protective pipe could be applied to excavation and trenchless areas for protecting high pressure and ultra-high voltage power cables buried underground.

Product: 20µl Universal Pipette Tips Available Size: 10µl, 20µl, 100µl, 200µl, 300µl, 1000µl, 1250µl, etc Material: Polypropylene (PP) Production Environment: Class 100000 Dust-free Workshop Certification: ISO 13485, ISO 9001, CE Application: Laboratory Usage Type: Filtered, Sterile, Low Retention Production Capacity: 5000 CTNS/M Lead Time: 7-15 Days Sample: For Free (1-5 Racks) Features ·Smooth and thin-walled design ·DNase, RNase, Pyrogen-free ·Compatible with Gilson, Eppendorf, Thermo and other brands' pipettes ·Filter elements in pipette tips act as a solid barrier for aerosol to prevent pollution ·Manufactured by advanced molding technology ·Ability to withstand high pressure and high temperature ·-80℃ - 121℃ heat-resisting range ·Lightweight design, to save raw materials and resources ·Excellent flexibility, sealing and transparency ·Applied in the medical institution, scientific research institution, blood bank, etc

Minimum Order: 1 bags

The heat shrinkable marking tube is to print words on the heat shrinkable sleeve, which is also called the marking number tube. The marking tube and the printing sleeve are used for marking. On the basis of the heat shrinkable sleeve, the words are printed after surface treatment to distinguish different lines and facilitate maintenance and management. It is widely used abroad. It is mainly used for the two ends of the internal wires in the distribution box to distinguish the properties of the wires. Identification tube is widely used in electronics, electric power, electrical appliances, power supply, computer, communication, aerospace, locomotive, harness office, communication, network wiring and other fields. Our logo tubes are customized according to customer's requirements. The printing content, length range, inner diameter of heat shrinkable sleeve, material and color of heat shrinkable sleeve are all determined by customers. Our logo tube ensures environmental protection; The finished heat shrinkable marking tubes meet the requirements of RoHS. Huawoer Heat-Shrinkable Material Company, located in Guangdong-Hong Kong-Macao Greater Bay Area, which is one of the most dynamic area of China, also it's the hub of communication, have efficient transportation system and infrastructure. We focus on to offer the best quality and satisfactory service when establish, and now our customer all around the world include Asia, Europe and USA. We have our own factory and R&D center, to ensure the quality of the product. And our produce include heat shrinkable tube, dual wall heat shrinkable tube, mid wall heat shrinkable tube, silicone tubing, anti-skid pattern tube, PVDF, Teflon tube, marking tube, sylphon bellows, PVC tube, PU tube etc.. Which have UL, CSA, KEMA, SGS and CCC authentication certificate, ISO9001, ISO14001 and ISO/TS16949. We have sufficient stock can provide rapidly supply and also accept customized with your specific requirement, for example size, color, print, cut etc.. Anything you need please feel free to contact us at 5126108@qq.com!

Minimum Order: 10 long tons

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive. Huawoer Heat-Shrinkable Material Company, located in Guangdong-Hong Kong-Macao Greater Bay Area, which is one of the most dynamic area of China, also it's the hub of communication, have efficient transportation system and infrastructure. We focus on to offer the best quality and satisfactory service when establish, and now our customer all around the world include Asia, Europe and USA. We have our own factory and R&D center, to ensure the quality of the product. And our produce include heat shrinkable tube, dual wall heat shrinkable tube, mid wall heat shrinkable tube, silicone tubing, anti-skid pattern tube, PVDF, Teflon tube, marking tube, sylphon bellows, PVC tube, PU tube etc.. Which have UL, CSA, KEMA, SGS and CCC authentication certificate, ISO9001, ISO14001 and ISO/TS16949. We have sufficient stock can provide rapidly supply and also accept customized with your specific requirement, for example size, color, print, cut etc.. Anything you need please feel free to contact us at 5126108@qq.com!

Minimum Order: 10 long tons

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive. Huawoer Heat-Shrinkable Material Company, located in Guangdong-Hong Kong-Macao Greater Bay Area, which is one of the most dynamic area of China, also it's the hub of communication, have efficient transportation system and infrastructure. We focus on to offer the best quality and satisfactory service when establish, and now our customer all around the world include Asia, Europe and USA. We have our own factory and R&D center, to ensure the quality of the product. And our produce include heat shrinkable tube, dual wall heat shrinkable tube, mid wall heat shrinkable tube, silicone tubing, anti-skid pattern tube, PVDF, Teflon tube, marking tube, sylphon bellows, PVC tube, PU tube etc.. Which have UL, CSA, KEMA, SGS and CCC authentication certificate, ISO9001, ISO14001 and ISO/TS16949. We have sufficient stock can provide rapidly supply and also accept customized with your specific requirement, for example size, color, print, cut etc.. Anything you need please feel free to contact us at 5126108@qq.com!

Minimum Order: 10 long tons

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags

Heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing. Features ·Flexible, highly flame-retardant. ·Sleeves meet the print performance requirements of SAE-AS81531. ·Markers can also provide insulation and strain relief. ·Marks are permanent after printing; mark performance improves after shrinking. ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Minimum Order: 1 bags