Plastic Machinery & Parts

Auto Rear View Mirror Housing Mold The car rearview mirror is an important part of car exterior parts, located on both sides of the car, is one of the most important exterior parts of the car. The rearview mirror of a car is a device used to allow the driver to observe the road conditions during driving, which can be said to be the driver's eyes. Automobile rearview mirrors are generally composed of mirror ring, base, mirror housing, bracket, rotating shaft, and other parts. Precautions for Auto Rearview Mirror Housing Mold The parting line of the plastic part is on the R, and the R is on the fixed and movable mold respectively. In order to avoid the parting line appearance of the visual surface, special attention should be paid to making the core side 0.05- 0.1mm smaller to avoid mismatch of the plastic part. The fixed and movable die stop should be designed with precise positioning. Avoid dislocation of fixed and movable mold cores and prevent the mismatch of plastic parts. Because of the sharp edges of the Auto rearview mirror housing mold setting and the mold core plastic material position, must be taken care of to protect it during the mold making. It is best to use opaque tape to protect it to avoid gaps during transportation. When designing an oblique slider with a core pulling along the Z-axis, it is necessary to pay attention to the slope of the bottom surface of the front end of the oblique slider to be greater than or equal to the angle of the bottom surface of the oblique slider seat to avoid undercutting. The design of the cooling lines and spring of the inclined slider must be parallel to the angle of the core pulling of the inclined slider to facilitate the processing of the inclined slider. The bottom of the wear block at the bottom of the inclined slider should be designed to be straight, and the wear block should be protruding to avoid interference with the B plate and the stroke stop of the inclined slider when the inclined slider moves backward. Since the oblique slide block must be installed with the fixed mold core to save the jaws, the slider needs to be designed for the mushroom head positioning, and the design of the craft screw is also necessary to facilitate the installation of the fixed mold core and the oblique slide block to save the jaws. We have types of injection molding dies for sale, if you have needs to buy injection mold products, please contact us.

Minimum Order: 1 bags

PVC moulded fittings is playing an important role in the pipeline systems, they are used for connection, control, direction change, diversion, sealing, support in the piping & plumping system installation. There are a variety of PVC pipe fittings that are of different connection functions: Tee, Cross, Elbow, Coupling, Cap, Female Adapter, Male Adapter, Reducing Bushing, Plug, Pipe Clip, Union, Snap Tab, Socket, End Cap, Flange and many more. Thanks to the Chemical sciences & technologies, it is some formula that works well to add environmental-friendly stabilizer in PVC material, thus, we can produce non-toxic and tasteless PVC pipe fitting by injection molding processing. So the PVC pipe fitting can be applied widely in residential houses, commercial buildings, industrial production pipe equipment, and public pipeline system. Application of PVC Y TEE Pipe Injection Molding The Y Tee is suitable to connect the main downpipe and branch downpipe, it has 2 inlets with a third at 45 degrees, so the sundries are easy to pass through the pipeline and won't be blocked. This pipe fitting made of PVC material has long usage life, it is lightweight, excellent hardness and tensile strength, heat insulation, moisture-proof, flame retardant, good aging resistance, excellent corrosion resistance, resistance to temperature with small deformation, frost resistance. With a simple construction method and convenient operation, you can use it for both exposed and hidden installation. Green Vitality Industry is a full-service mold manufacturer specializing in plastic injection mold design engineering support, injection mold manufacturing, and qualifying of plastic injection molds. Green Vitality operates plastic injection molding machines ranging from 80T to 400T, 600T, and larger tonnage injection molding machines are in preparation. Our company uses the latest plastic injection molding technology and equipment to provide customers with world-class products and services. Green Vitality Industry provides a wide range of product solutions for the manufacture of various plastic injection parts.

Minimum Order: 1 bags

Our series pvc Coating Machine mainly used for Film coating : release film, protective film, scratch-resistant film. Hot stamping film, laser holographic film, aluminized transfer, thermal transfer film, coating and other coating products, production, ,BOPP,CPP ,PET ,PP ,PVC tape, foam stickers, PE, non-woven, PU coating, , Metallic yarn coating The paper coating : It’s suitable for the production of paper, white cardboard, duplex cardboard, synthetic paper, PP paper, PET sheet, high light waterproof photo paper, matte photo paper, cast coated photo paper, RC high glossy photo paper, carbonless paper, PP Synthetic Paper and other high-tech information industry paper. Foil coating : Household Foil, Pharmacy Foil, Cold Forming Medicine Package Foil, Food Soft Packing Foil, Container Foil, Beer Mark, Air-conditioner Foil, Decoration Foil Machine main parameter PE Protective Film Coating Machine: 1. Whole machine controlled by PLC 2. Tension controller adopts Mitsubishi 3. Main motor adopts ABB motor . 4. The dry oven length is about 18 meters 5. Machine speed is about 180mmin 6. Coating speed is about 160mmin. 7. Coating mode depends on the coating thickness, the solid content and the viscosity . 8. Heating type :Electric heating ,Oil heating ,Steaming heating (You can choose one which is most economically ) Model C3-3 Coating width 1000mm-1800mm Material paper ,BOPP,CPP,PET,PVC, Aluminum foil Unwinding dia. φ300~1000mm ewinding dia. φ300~1000mm Oven temperature 30 ~ 220°C(According to the material) Oven length 3 ~ 48 m (According to the material) Coating speed 5~ 180 m/min (According to the material) Coating type Comma scraper coating, veins roller coating, three-rollers coating, etc.

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability, noise reduction, wear resistance, quietness, lubrication and antistatic. Processing Detail of PA66 GF20 (A2000D) Other Details of  PA66 GF20 (A2000D) Physical Property Ash (20.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1285Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.9 % 1 ISO294-4) Shrinkage Vertical Flow (0.8-1.1% I ISO294-4) Mechanical Properties Tensile strength (145.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 5mm/min Notched Impact Strength (8.5KJ/m2 I ISO179) Conditioned 1.0J Flexural Strength (235MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (6876 MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (245*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyethylene or buy pa6 6 gf50, contact us.

Minimum Order: 1000

PA66 GF 15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property enhancements such as high tensile strength, heat stabilized and flame retardant make it suitable for injection molding.  Other percentages glass-filled nylon is also available on a custom-order basis. Typical Application of pa66gf15 (A2000C) Nylon 66 GF15, mainly used in internal and external structural parts around the engine, electrical switches, and electronic connectors. Processing Detail of PA66 GF15 (A2000C) Other Details of pa6 6gf15 (A2000C) Physical Property Ash (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1245Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.7-1.0% 1 ISO294-4) Shrinkage Vertical Flow (1.0-1.4% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.0% I ISO527) Conditioned 5mm/min Notched Impact Strength 6.0KJ/m2 ISO179) Conditioned 1.0J Flexural Strength (188MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5350MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (240*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyolefin or more, contact us.

Minimum Order: 1000

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables, household appliances, automobiles accessories, etc. The carrier of the special color masterbatch is the same as the plastic of the product, and it has good matching. After heating and melting, the pigment particles can be dispersed in the product plastic well, and it has good chemical stability. From a functional point of view, the products of color masterbatch material include antistatic masterbatch, antioxidant masterbatch, light stable masterbatch, lubricating masterbatch, open masterbatch, flame retardant masterbatch, matte masterbatch, pearlescent masterbatch, filler masterbatch, conductive masterbatch and antibacterial and anti-mildew masterbatch. Some masterbatches are comparable to European and American materials like DATE company with stable product quality and high-cost performance. As a reliable masterbatch supplier/masterbatch exporter, Anmei produces the low-shrinkage PBT masterbatch for optical fiber and cable, which is one of our special masterbatch products. Types of Masterbatch Material in Anmei We offer a wide range of white masterbatches based on carriers such as TPU, PE, PS, ABS, and more. An antimicrobial masterbatch is supplied in carriers suitable for most polymers including PVC, pe masterbatch, HDPE, pp masterbatch, PA, PET, abs masterbatch and PC. What is Antimicrobial Masterbatch? It can be used in most general plastics such as ABS, PP, PE, PC, as well as injection molding, extrusion, blow molding and other conventional plastics. For products that have high requirements for pro... The Advantage of PBT Additive Masterbatch in Anmei Low-shrinkage PBT masterbatch is one of Anmei's best-selling products mainly used for 5G fiber jackets. Anmei PBT can bring: Your satisfaction is important to us! Email us your questions about engineering plastic and masterbatch products and more. As a plastic engineering inc, Anmei provides pa6 plastic material, modified polyolefin, master batches, polypropylene masterbatch, slip masterbatch, masterbatch compound, abs and pc material and etc. For more information, please feel free to contact us!

Minimum Order: 1000

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material are LG Chemical, Toray and Denka. Transparent ABS Typical Application Many chemicals will corrode the rubber phase in the ABS resin, causing the transparent ABS to fog. MABS plastic material is widely used in household appliances and kitchenware, consumer goods, automotive and packaging industries. At present, transparent ABS resin is mainly used in small appliances such as TVs and air conditioners, refrigerators, washing machines, floor scrubbers, window cleaners, etc., and parts of transparent windows, double-shot molding TV front frames, and air-conditioning panels sprayed on the back are also made by transparent ABS (MABS plastic). Transparent ABS Processing Detail Here are the processing details of transparent ABS（MABS plastic material）, a kind of ABS engineering plastic. Other Details of Transparent ABS (MABS plastic) Physical Property of Transparent ABS  (MABS plastic) Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties of Transparent ABS  (MABS plastic) Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property of Transparent ABS  (MABS plastic) Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions of Transparent ABS  (MABS plastic) Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As a masterbatch factory, Anmei provides pa6 plastic material, modified polyolefin, master batches, pa6 gf 15 and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Anmei company specializes in the production of TPU slip masterbatch ingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents. TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film. Problem & Solution of Masterbatch Application in Cast Film Problem1: Moisture in the masterbatch or poor heat resistance of the ingredients will cause the cast film to have a network structure. Solution1: Appropriately reduce the temperature of each zone and dry the masterbatch in the cast film production process. Color masterbatch should be chosen pigments with high color strength and good heat resistance, and then strengthen the blowing, and appropriately increase the water temperature. Problem2: The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film. Solution2: Increasing the amount of masterbatch Increasing the content of titanium dioxide in the masterbatch Problem3: Poor pigment dispersion leads to colored spots on the cast film. Solution3: Choosing masterbatch with good dispersibility ingredients. Problem4: The volatile matter in the masterbatch causes smoke during processing. Solution4:  Reducing the extrusion temperature Choosing high-temperature resistant masterbatch As a masterbatch company, Anmei provides pa6 plastic material, modified polyolefin, master batches, poly butylene terephthalate, pbt, pbt material, pbt masterbatch, black masterbatch and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

PC-ABS is a blend of PC and ABS.If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of ABS is good fluidity, but low surface hardness. The blended PC-ABS material retains the advantages. PC-ABS has higher surface hardness, higher rigidity and toughness, and also higher resistance to stress cracking. The mechanical properties of PC and ABS material are somewhere in between. Typical Application of PC/ABS PC/ABS of Anmei Company has passed the SGS laboratory test, and its oil resistance can meet the requirements of 10k times of opening and closing of kitchen appliances without cracking. Processing Detail of ABS chemical resistance Other Details of PC/ABS Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature ​ 80*C As a engineering plastic company, Anmei provides pa6 plastic material, modified polyolefin, master batches, pc abs gf30, pc abs v0, pc abs gf20, pc abs gf10, pc abs fr40, abs pc plastic, pc abs, pc abs material and etc. For pc abs price or more information, please feel free to contact us!

Minimum Order: 1 bags

PA 6 GF50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural parts of machinery, vehicles, electronics, sports equipment and other fields. We know that pa6 50gf composite material takes both strength and toughness into consideration, which is exactly what the suspension control arm needs. Processing Detail of PA6 GF50 (A1011J) Other Details of pa6 6 gf50(A1011J) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As one of masterbatch producers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Cascell® WH foam core has been specifically designed for aerospace application, such as fairing and middle section of launch vehicle. It can also be used in back pressure frame of large civil plane due to its excellent mechanical properties. In the helicopters, Cascell® WH has been mainly used in main & tail rotor blades and fuselage panelsetc. Processing and production Cascell® WH can take curing temperature up to 130°C and pressure up to 0.3MPa. After heat treatment, Cascell® WH can even be cured at temperature of 180°C and at pressure of 0.7MPa. Cascell® WH core makes it possible to produce sandwich components in a single step (co-curing), resulting in reduced overall production time. Cascell® WH is highly suitable with autoclave technologies and vacuum infusion processes, including RTM and VARTM processes. Thermoforming and shaping Cascell® WH can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages. High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department. ​

Minimum Order: 1000

16-1600mm High speed HDPE pipe Extrusion line Introduction HDPE Pipe Extrusion Machine is widely used in the whole country water supply, water sewage, gas supply and house water supply project. It includes HDPE Plastic pipe extrusion machine, LDPE Plastic pipe extrusion machines, PPR/PERT Pipe extrusion lines, ect. YILI machinery adopts European most advance technology and develops with its own technical Strategy to ensure unique structure, high configuration, highly automation, easy operation of the whole pipe extrusion machine. The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient. The line can be equipped with another extruder used for extruding the mark line.

PET Jar Blowing Machine, Automatic Bottle Blowing Machine, Blow Moulders Benefits of One Step Injection Stretch Blow Molding Machine (ISBM machine) Nearly no scrap rate Guaranteed hygienic requirement Fixed orientation: ISBM machine could make bottles with the same orientation of screw, which could make the closures (screw cap, flip caps, pump, etc.) pointing in the same direction. Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle. Most beneficial bottling line Less energy consumption while high output rates Scrapless process meaning no flash to trim and no regrind. High utilization of raw material, high yield, high rate of return on investment. Does not require separate preform mold and machine. Cut transferring cost of reforms/bottles. Wokring Process of Injection Stretch Blow Molding Machine Workplace 1 THE FIRST SERVICE POSITION The plastic melt is injected into the parison under low injection pressure, and the neck of the bottle is precisely shaped. After proper control, the mold is opened and the mandrel and parison are transferred to Workplace 2 THE SECOND SERVICE POSITION Blow molding is completed in this cavity by cooling and forming station. (The mold cavity determines the shape and appearance of the bottle). The parison is inflated by the air coming out of the mandrel and close to the mold. Then, the mold is opened and the mandrel and the parison are transferred together Workplace 3 THE THIRD SERVICE POSITION Demoulding is completed at this station, and then packaging or filling is carried out through the assembly line. The three actions of injection, blow molding and demoulding are carried out at the same time, which is highly efficient and energy-saving. Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM) Item Unit Machine Type ISB 1100AN-3 Injection Part Screw Diameter mm 50 Screw L/D Ratio L/D 24:1 Screw Speed r/min 0-150 Theoretical Injection Capacity cm3 481 Injection Pressure MPa 176 Max. Hydraulic Pressure Kg/cm 140 The Actual Injection Quantity g(ps) 452 Oz 16 Screw Stroke mm 245 Clamping Part Blow Clamping Force KN 150 Clamp Tonnage KN 600 Wheel Diameter mm 1100 Max. Height PP, PET, PETG, Tritan, PS, PC mm 200 PC, PETG, Tritan, PS mm 220 Open Vertical Mode Trip mm 570 Others Max. Pump Pressure MPa 16 Servo Motor Kw 22 Mode Opening/Locking Motor (Double Pump) Kw 22 Electric Power Kw 12.2 Tank Volume L 420 Dimension of Machine m 4.5*1.95*3.4 Machine Weight T 9 --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. 10ml 100ML 4 Cavity Injection Stretch Blow Molding Machine BV 0 Application of injection stretch blow molding machine A large range of refined and essential designed platic blow molded bottles and jars are available from size 10ml to 2500ml. Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non- round, ultra-light etc. Wide mouthed jars for a variety of food and non-food applications, Cosmetics Packaging: mascara, lotion, cream etc. Pharmaceuticals: eye drops, medicine bottle, pills, oral liquid, intravenous drip bottles etc. Baby Feeding Bottles, Spice, Liquor, Carbonated Drink, Beverage Bottles etc. 10ml 100ML 4 Cavity Injection Stretch Blow Molding Machine BV 1 JASU is the first PET Bottle Machine Manufacturers of Single Stage PET Blowing Machine Absorbed the advanced technology from Japan and Germany. Manufacturer/Direct Factory with production base takes 24000m2. Own highly qualified technical staffs (20-30 persons) and R/D center. Obtained a number of technical patents. Overseas sales increase 33% annually. Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc. Our machine enjoyed high reputation among customers. Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos. Mould and tooling, we have our own mold-making facility and mould workshop ourselves, advanced CNC machine and smart design engineers. We can treat different materials and sizes of products. Auxiliary machine,we will equip you with the necessary quality auxiliary machines to ensure the production plan running well. Provide one-stop service. 10ml 100ML 4 Cavity Injection Stretch Blow Molding Machine BV 2

Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method.

Minimum Order: 1 bags