Plastic Building Materials

C-glass yarn plain weaving fiberglass mesh is widely used as base ventilatin fabric used in tunnel and mine, underground or smelting plant after soaked by special technique. Glass fibre mesh fabric for ducting has strong tension, well heat resisting, anticorrosive, resistance to burn, strong adhesive power. Standard Thickness of Glass Fibre Mesh Fabrics of Ducting: 0.28mm. Standard fabric width: 0.915m. Standard weight: 273g/m2. Characteristics: Good heat resistance-Continuous working temperature -70℃~230℃. Excellent climate resistance,long service life. High insulation resistance-Dielectric constant is 3-3.2, breakdown voltage is 20-50KV/MM.

Fiberglass Geogrid Composite Geotextile Fabric Providing Improved Loading Capacity of Road Construction Composite Geogrids are used for stabilize soils where a both reinforcing and separation between a granular base and very fine soil is required. The geocomposite binds closely to the soil being reinforced, separates different soil types and provides an effective filter action. Composite geogrids are made by bonding a nonwoven geotextile to fiberglass geogrid. The polypropylene / polyester geotextile stitch bonding or paste on the fiberglass geogrid. With high tensile strength and excellent anti-tearing and anti-bursting performance, this new compound building materials are widely used in water conservation, road construction,architecture, subway and tunnels construction. Typical Structures of Compound Fiber Glass Materials: For fiberglass geogrid composite geotextile materials, geogrid used has a tensile strength of 20KN to 400KN. Mesh size: 12.7x12.7mm, 25.4x25.4mm, 50x50mm Elongation: <=4% or 3%. Geotextile: Non woven PET or pp geotextile Unit weight: 25g/m2 to 500g/m2.

Fiberglass Mesh Reinforcing and Bonding Cement, Roofing Tiles, Mosaic and Various Building Materials Commonly used for cement reinforcing woven fiberglass fabric is 20 x 10 mesh, while various specifications available. The woven fiber open mesh made of yarns of flexible filaments offers strong bonding. It has tensile strength of 75 lb. per inch. Fiberglass mesh coated is acid and heat resistant, and will not rot or decay. The special coating on the fabric minimizes distortion and is compatible with asphalt cements and coatings, emulsions, solvent-based and hot- melt types. Popular yellow color helps ensure the fabric is completely submerged in roofing cement. Features: Good alkaline-resistance, high strength, excellent alkali and acid resistance, good cohesion, excellent in coating etc. Application: Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen) Reinforced cement products. Used for Granite, mosaic, marble back mesh etc. Waterproof membrane fabric, asphalt roofing. Fiberglass Reinforcing Mesh for Cement Tiles Reinforcing the backside of custom cement tiles Mesh tape: 36” wide

Fiberglass fabrics are widely used in the construction industry to reinforce the tensile, impact and flexural strengths of plasters, rendering stuccos, etc. They are also used as fiberglass window screening, swimming pool enclosures, sunshade screening and geo engineering materials. Glass fiber textiles for geo works have high intension, high tenacity, high occlusive force with soil or gravel, excellent erosion-resistance, water drainage, light weigt. Fiberglass mesh geo textiles are used to reinforce soft soil roadbed, river side slope of embankment, inhibit ground deformation, prevent crack caused by reflection, increase loading capacity of the pavement. Polyester filament geotextile is made by polyester textile needle consolidation, from 80-800g/m2, it is geosynthetic fabric used in geotechnical and civil engineering. The three-dimensional structure of the fiber has good mechanical properties and a good drainage performance. Synthetic geotextile enjoys good elongation properties, anti-aging chemical stability and high resistance to acid. The geotextile has a wide range of pore sizes and tortuous pore distribution to achieve excellent permeability and filtration performance. Geotextiles of Fiberglass, PP or Polyester Filament Synthetic Fabric is mainly used in following fields: 1, Water conservancy project dams and slope of filtration, channel isolation, impervious; 2, Highways, railways, airport runways based isolation, filtration, drainage, slopes, retaining walls and pavement reinforcement, drainage; 3, Port engineering soft ground, beach causeway, harbor piers and breakwaters reinforcement and drainage system

Fiberglass screen mesh has stable shape, straight surface and a long service life. It is well ventilate, easy washing, resistant to fire and corrosion proof. This fiber glass fabric is mainly used as insect screen or sunshade screen mesh in many countries. It can be made into insect proof ventilate screen for window or door shield, pet screen, fiberglass portiere and other forms for a wide range of applications. Fiberglass Screening Used for Ventilation, Insect Preventing, Installed on Windows and Doors Vinyl-Coated fiberglass screen is a kind of fiberglass mesh fabric made under the process of plastic-coating, plain weaving, and high temperature-fixing. It is supplied in rolls or we can cut it to pieces of certain sizes according to customers request. Specifications: Diameter:0.011i , nch,0.013inch; Standard (Mesh/inch ): 18x16, 18x14,14x14,20x20, 18x18, 16x16; Standard Color: White, Black, Grey,Coffee etc. Standard Width(inch): 24", 30", 34", 36", 42", 48", 60", 72",84",96",108"; Special Size are available according to requirements of customers.

EIFS Fiberglass Mesh is made of alkaline resistant fiber yarns and has been tested to DIN EN ISO 13934-1 tensile strength standards. We offer three types of EIFS fibreglass mesh for rendering uses: Heavy Duty Fiberglass Mesh for EIFS: Heavy weight external mesh designed specifically to reinforce areas exposed to increased stress, especially a plinth and other demanding places; Medium Duty EIFS Mesh: Medium weight fiberglass cloth is commonly used for reinforcing and rendering surfaces with a big opening of 10mm x 10mm; Standard mesh for EIFS: Standard weight fiber glass mesh fabric for common stucco skim coating, mosaic tile backing and marble backing. 4x4 160g Fiberglass mesh for EIFS systems Construction material Roll size: 1m width x 50 m length Mesh size: 4mm x 4mm Quality: 160g/m2. Packed in 1x20 full containers. Fiberglass Mesh applied to cement, plaster, walls, buildings and other structures inside and outside surface for base coat plastering and rendering, a new type of building materials for external wall stucco works. The EIFS mesh stripes are made from C-glass impregnated with alkali-resisting dispersion. Available in three widths, two weights and two colors (white and yellow). With a stable structure of the fibers, the fiberglass grid netting has high tensile strength, a uniform mesh opening and a smooth surface and resistance to alkali present in the chemical composition of plasters and paints.

Light steel skylight structure is a young and very vigorous steel structure system, which has been widely used in general construction sites, agricultural, commercial, service buildings, such as office buildings, warehouses, stadiums, entertainment, tourism buildings and low and multi-storey residential buildings construction and other fields. Delivery time: 1 5-30days Price term： EXW, FOB, CIF, CFR, CNF, etc. Payment： L/C, T/T, Western Union, etc. Port Delivery： Qingdao, Shanghai, Tianjin, Shenzhen, etc. We can provide customized products in different materials and sizes to meet different needs. Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information. We can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. The website: https://www.faststeelfactories.com/

Minimum Order: 1 bags

Geocell is an innovative geosynthetic product. It is a net-shaped cell structure made by welding high intensity thermoplastic sheet. Geocell uses advanced polymer composite materials instead of traditional reinforced cement, which can be widely used in river slope embankment protection, highway and railway infrastructure construction, sponge city construction, agriculture, urban construction, geological disaster protection and other projects. It is flexible and folded during transportation, stretching out and being filled with stone or concrete during service, and forming into structure with powerful lateral confinement and rigidity. CONTACTS:+86 18554215652

Minimum Order: 1000

TECON Shoring Tower TST60 is the fast assembly and cost-effective supporting wall shuttering system in formwork construction, especially developed for high shoring and heavy load projects, so it's widely used in bridges, subways, buildings and other civil engineering projects. The basic sizes of supporting frame are from 1.2*1.1 m to 1.5*1.6m, all heights can be incrementally realized with those frame sizes, as well as screw jacks. Those frames are tightly connected with each other by diagonal bracing vertically and horizontally. Features of Shoring Tower TST60 Fast and user friendly in assembly with very few elements High load-bearing capacity up to 60 KN per leg even considered 2.5 times safety factor Adapt various shoring requirements by only 2 frame heights and adjustable jacks Easily transfer to Stairs Tower by adding additional accessories Specification of Shoring Tower TST60 For loads up to 60kN per leg, Q345 for vertical tube, main frame size from 1.20*1.10m, 1.20*1.60m, 1.50*1.10m to 1.50*1.60m Hot dip galvanized surface treatment for main frame offers more than 8 years service time Screw jack foot and screw jack head provides heights adjustment up to 500mm extensions at each end Reinforced by diagonal braces vertically and horizontally Main shoring tower sizes Basic dimensions under the slab tables: 1.50 m x 1.20 m up to 1.50 m x 3.00 m Basic dimension of shoring tower: 1.00 m x 1.20 m Basic dimension of stair tower: 1.50 m x 3.00 m Work as shoring for TECON Slab table formwork by adding anti-falling lock Efficiently and easily moved as whole units even slab tables with tower crane lift or trolley Related products of Shoring Tower TST60 TECON Ringlock Scaffolding, TECON Multi-purpose Prop, TECON Slab Table formwork.

Minimum Order: 1 bags

TECON Shoring props are covering full range of props as floor support, fabricated on different load capacity, adjustable height and different raw material basis. 1/ Heavy Duty Steel Prop following EN1065 standard 2/ Acrow Prop following AS3610 standard 3/ Light Duty Prop 4/ Spanish Prop 5/ Italian Prop We also developed our own mould and design to produce aluminium props for sale at maximum 6250mm height. They are compatible with some European formwork brand including MP prop.Slab shuttering are also available.

Minimum Order: 1 bags

TECON Self-climbing Platform SCP is a full sealed climbing facade operation platform and protection system, extremely improve high-rise project construction efficiency and safety. Most importantly, self climbing platform can climb by itself rapidly without crane lift. Plastic formwork systems are also available. Feature of Self-Climbing Platform SCP High-efficiency self-climbing system without crane lift Less weather effect depends on full sealed outer protection Neat and costing saving tower facade protection Adapt to different geometry plan and floor height via customized planning Multiple utilizing in structural concreting, plastering, painting, etc. Specification of Self-Climbing Platform SCP Trustful safety by double embedding anchor system and climbing shoe Reutilization rate up to 90% from a different project Platform height: 3 to 5 times of storey height / 12m to 18m Platform width: 0.8m Climbing speed per floor: around 0.5 hour Carrying capacity of the operation layer: Simultaneous operation of 2 steps：3 kN per cub-meter Simultaneous operation of 3 steps：2 kN per cub-meter Related Products of Self-Climbing Platform SCP Protection screen, Self-climbing formwork, Climbing formwork

Minimum Order: 1 bags

TECON Scaffold Ringlock is designed & manufactured to be the most convenient and efficient Ringlock scaffolding system available for sale. With only a few user-friendly components and a hammer, it can be used as a shoring system, facade platform as well as work access for both the construction site and the industrial field. We also provide table formwork for slab. Features of Ringlock Scaffolding Quick erection and dismantling with only a hammer Safety and stability due to rigid wedge connections without loosening Durability and less maintenance due to high strength steel and hot-dip galvanizing finishing Can be used as shoring support to reach a great height and bear heavy loads Can be used as façade platform for site crew protection and working platform at the height Can be used as an access tower with stairs inside to the site at the height Our ring lock scaffolding parts are of high-quality. Specification of Ringlock Scaffolding Main sizes of Standard: 0.5m/1m/1.5m/2m/2.5m/3m , Q345 high strength grade steel Q345, O.D.48*3.2mm Minimum 60µm hot-dipped galvanization guarantees the long service life 60mm diameter standard is also available Eight holes on each rosette allow various tight connection from ledger to diagonal brace Application of Ringlock Scaffolding Construction sites from residential & commercial buildings to fly-over roads, metro stations, as well as ship yards, petrochemical plants, etc. Related Scaffolding of Ringlock Scaffolding Shoring Tower ST60 V-shore frame Aluminium prop

Minimum Order: 1 bags

TECON Protection Screen is a modular designed facade protection system, automatic climbing by mobile hydraulic cylinder system. It provides maximum three floors coverage with optional numbers of platform. Safe, efficient and weather regardless operation condition is hence guaranteed at your minimum cost. Safety screen construction are available. We also provide shuttering in building construction. Feature of Protection Screen Independent self-climbing system saves crane usage during the whole phase protection for site crews Customized storey heights and platform numbers meet different projects requirement. Full sealed outer protection leads to perfect façade appearance, while it also ensures safe operation condition Embedded anchor system ensures firm attaching to the concrete structure Modular unit design means universal utilization among different projects Specification of Protection Screen Rail-guided platform climbs through climbing shoes attached into concrete 2.5 to 3.5 floors coverage height available, maximum 14 meters 1 meter platform width from structure 0.75kn/sqm loading capacity of platform during formwork operation and concrete maintenance 1 to 4 floors platform available in specific project ±10°backwards, forwards, right and left tilting angle Related Products of Protection Screen Self-climbing platform SCP, Self-climbing formwork TSC50/100, Jump formwork CB240, Ringlock Scaffolding

Minimum Order: 1 bags

TECON Plastic formwork TP60 is recognized as one of the lightest plastic formwork systems due to its medium size panel design and the application of ABS (Acrylonitrile Butadiene Styrene). Besides of its light weight, it is also extremely easy for use even by unskilled workers. Walls, columns, slabs can be easily and efficiently formed with only a few panel sizes and accessories. We also provide plastic formwork for concrete walls. Feature of Plastic Formwork TP60+ Universal application on walls, columns and slabs etc., also modular house with one pour Fast and extremely easy to assemble with only a few accessories, no skilled workers required Installation without crane assistance due to its light weight Quick clean with just water Specification of Plastic Formwork TP60+ High strength and durable panels can reach up to 100 reuse times Less or even no plaster after strip Can be also used with foam concrete (light weight concrete) Up to 3.6m high wall by one pouring, for a maximum fresh concrete pressure of 50Kn/m2 Up to 25cm slab thickness Different column sizes at 5cm increment start from 20cm Main Panel size and weight Description Size Unite weight Panel TP120/60 1200x600 9.7 Panel TP40/60 400x600 3.1 Panel TP30/60 300x600 2.4 Panel TP25/60 250X600 2.1 Panel TP20/60 200x600 1.9 Panel TP18/60 180x600 1.3 Application of Plastic Formwork TP60+ Medium and small size residential and commercial buildings, basement, columns and modular houses etc., especially adapt to anti-corrosion needed project. RELATED PRODUCTS of Plastic Formwork TP60+ LITE Steel Formwork, Adjustable plastic column formwork, Alu Lite formwork

Minimum Order: 1 bags