Pipe Fittings

Code：D81X4 Size: 2″-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12 Dimension: MSS SP-67 Connection：AWWA C606-2006 Grooved and Shouldered Joints Pressure Rating: 175PSI, 200PSI, 250PSI, 300PSI Temperature: 0-80 ℃ Surface Treatment: ANSI/AWWA C550 Certificate: UL Listed / FM Approved Medium: Water, gas etc. Products Details What is the Fire Protection Grooved Butterfly Valve？ Grooved butterfly valve (Gear actuator & tamper switch) is light weight valve with signal gearbox, and it is grooved connection. The valve is fully open or closed when the disc is rotated a quarter turn. The Grooved signal butterfly valve is a grooved clamp connection valve designed completely based on the principle of symmetry. It is symmetrical in the axial centerline, radially centerline, two-way full pressure seal, with a signal device, which can give the valve action. It is mainly used in various pipelines of water supply and drainage, building fire protection and other systems, especially in fire protection pipelines, to cut off and adjust the flow of the medium. Quality Control Advanced equipment guarantee the production of high quality products. Advantages of DISA moulding line:1. High quality precise casting less scrap and lower finishing costs. 2.High Production Efficiency(1)Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes (2).higher profitability over a longer service life. 3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant) High-precision, hydraulicly driven mould transport, no shifting, distortion, or displacement of moulds. The advantage of the sand supply system: The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability. Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc. From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highest and most consistent quality products are supplied to our valued customers. Application and Case Fire Protection Grooved Butterfly Valve are used in fire protection system, water system, gas system, irrigation system, etc. Fire Protection Butterfly Valves are used in many projects , such as China Taiwanese Building 101, Xiamen Building, Wuhan Expo Building and other famous landmark projects.

Minimum Order: 1 bags

Code：XGQT12 Size: 1”-12”(DN25-DN300) Material: Ductile iron ASTM A536, 65-45-12 Dimension: ISO6182、AWWA C606、GB 5135.11 Connection：ASME B36.10、ASTM A53-A53M、ISO 4200 Thread: If have ISO 7-1,BS 21,BSPT, NPT,ASME B1.20.1 Pressure Rating: 175PSI-500PSI Surface Treatment: Red Painting, Epoxy Coating ,Hot-Dip Galvanized, Electroplated Bolt & nut: ASTM A449/ CLASS 8.8/ ISO 898 Gasket: EPDM, Nitrile, Silicone rubber, etc. Certificate: UL Listed / FM Approved Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems Products Details Ductile iron Grooved pipe fittings Equal Tee. The material is ductile iron. The connect method is Grooved connection. The Grooved Tee also called DI Grooved tee. Grooved Tee have Grooved tee short, Grooved tee long radius 90 degree. Grooved Reducing Tee, Grooved tee with Thread outlet, also called Thread Grooved Tee, normaly the branch outlet is thread end ,the main outlet is Grooved end. According to the surface coating ,dip painting Grooved Tee red color ,epoxy red color Grooved Tee ,epoxy blue color Tee ,galvanized Grooved tee. Grooved pipe surface requirements The surface of grooved pipe fittings should be flat and smooth, and defects such as pores, sand holes, slag inclusions, cold partitions, shrinkage holes, cracks, and depressions that affect the performance are not allowed. There are no defects such as bulges and depressions in the casting groove. There are no processing defects and bump damage in the processing parts of grooved pipe fittings. The logo is clearly recognizable. The surface of grooved pipe fittings should be treated with anti-corrosion treatment by dipping paint, spraying, hot-dip galvanizing, etc.: a) Paint layer. It should be uniform, smooth and firm, without lacquer tumor, paint accumulation and paint leakage, the thickness of the paint layer is not less than 25.4μm, and the lead content of the paint layer is less than 0.009%. b) Plastic layer. It should be uniform, continuous, smooth and firm, and should not be flammable when applied to fire protection systems. The thickness of the plastic layer is not less than 40μm. c) Hot-dip galvanized layer. The zinc layer on the surface of galvanized groove pipe fittings should be uniform and continuous smooth, and there should be no defects such as zinc leakage, zinc layer falling off, and black spots; The contact surface with the rubber ring/pad is not allowed to have appendages such as zinc tumor, zinc slag, pile zinc, etc., and the lead content of the zinc layer is not more than 0.1%. The minimum zinc layer thickness is 63 μm. Bolts and nuts should be hot-dip galvanized, electro-galvanized and other anti- corrosion treatments: a) Electro-galvanizing. The electroplating layer has a bright luster, and the zinc layer is uniform and complete, there must be no zinc leakage and rust spots locally, and the thickness of the zinc layer is not less than 8μm. b) Hot dip galvanizing. Hot-dip galvanizing should comply with the provisions in GB/T5267.3, the surface should be smooth, no leakage plating surface, zinc tumor, black spots, no residual solvent residue, oxide scale inclusions and other defects that damage the intended performance of parts. The thickness of the zinc layer is not less than 40μm. Application and Case Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc. These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building, Wuhan Expo Building and other famous landmark projects.

Minimum Order: 1 bags

Code：XGQT07 Size: 1”X 12”(DN25-DN300) Material: Ductile iron ASTM A536, 65-45-12 Dimension: ISO6182、AWWA C606、GB 5135.11 Connection：ASME B36.10、ASTM A53-A53M、ISO 4200 Thread: If have ISO 7-1,BS 21,BSPT, NPT,ASME B1.20.1 Pressure Rating: 175PSI-500PSI Surface Treatment: Red Painting, Epoxy Coating ,Hot-Dip Galvanized, Electroplated Bolt & nut: ASTM A449/ CLASS 8.8/ ISO 898 Gasket: EPDM, Nitrile, Silicone rubber, etc. Certificate: UL Listed / FM Approved Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems. Products Details Grooved 45° Elbows are a special type of pipe fitting used in grooved piping systems. Grooved duct systems are known for their ease of installation and versatility. Groove design allows for quick, direct connections without soldering. Here is some information about fluted 45° elbows: Features of grooved 45° elbow: 1. Materials: Grooved 45° elbows are typically made of ductile iron, stainless steel, or other materials suitable for the intended application. Specific materials may vary based on factors such as fluid type, environmental conditions and industry standards. 2. Groove design: The groove design can be easily assembled using couplings, washers and bolts. Grooves in pipes and fittings provide a secure and leak-proof connection. 3. Angle: The 45° angle of the elbow indicates the degree of change in the direction of fluid flow. It is typically used when a gradual change of direction is required. 4. Materials and standards: The materials and standards for grooved 45° elbows depend on the manufacturer and the specific requirements of the application. Common materials include: Ductile Iron: Commonly used in water and wastewater applications. Stainless Steel: Suitable for corrosive environments or applications requiring higher corrosion resistance. As for standards, products should meet industry standards, such as those set by organizations such as the American Water Works Association (AWWA) or the National Fire Protection Association (NFPA). Additionally, manufacturers may have their own product specifications. Applications: Like other grooved pipe fittings, grooved 45° elbows can be used in a variety of industries, including: 1. Fire Protection Systems: Grooved duct systems are commonly used in fire protection applications due to their ease of installation and reliability. 2. HVAC Systems: In heating, ventilation, and air conditioning (HVAC) systems, grooved fittings are used to achieve efficient, quick connections. 3. Water and wastewater: Ductile iron grooved pipe fittings are commonly used in water and wastewater treatment plants. 4. Industrial piping: Grooved pipe fittings are used in industrial piping systems to transport various fluids. Before selecting and installing a grooved 45° elbow, always consult the manufacturer’s specifications and guidelines to ensure proper compatibility with the intended application and compliance with industry standards and local codes. Quality Control： Advanced equipment guarantee the production of high quality products. Advantages of DISA moulding line: 1. High quality precise casting less scrap and lower finishing costs. 2.High Production Efficiency (1). Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes (2). higher profitability over a longer service life. 3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant) High-precision, hydraulicly driven mould transport, no shifting, distortion, or displacement of moulds. The advantage of the sand supply system: The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability. Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc. From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highest and most consistent quality products are supplied to our valued customers. Application and Case Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc. These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building, Wuhan Expo Building and other famous landmark projects.

Minimum Order: 1 bags

Code：XGQT2 Size: 1”-12”(DN25-DN300) Material: Ductile iron ASTM A536, 65-45-12 Dimension: ISO6182、AWWA C606、GB 5135.11 Connection：ASME B36.10、ASTM A53-A53M、ISO 4200 Thread: If have ISO 7-1,BS 21,BSPT, NPT,ASME B1.20.1 Pressure Rating: 175PSI-300PSI Surface Treatment: Red Painting, Epoxy Coating ,Hot-Dip Galvanized, Electroplated Bolt & nut: ASTM A449/ CLASS 8.8/ ISO 898 Gasket: EPDM, Nitrile, Silicone rubber, etc. Certificate: UL Listed / FM Approved Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems Products Details Grooved pipe couplings are mechanical connectors used to join pipes in a variety of applications, providing a flexible and efficient method for assembling and disassembling piping systems. These couplings usually consist of two housings with washers between them and secured by bolts or nuts. It is used for grooved pipe connections. At the joint, the adjacent pipe ends are not allowed to have relative angular displacement and corresponding axial rotation. The two butt joints of this product are inclined grooved pipe joints. Standards related to grooved pipe joints generally address design, dimensions, materials, and testing requirements. Some common standards for grooved pipe couplings include: ASTM A536: This standard covers ductile iron castings for a variety of applications, including grooved pipe joints. ASTM A795: This standard specifies black and hot-dip galvanized (galvanized) welded and seamless steel pipe for fire protection applications and may involve the use of grooved joints. UL 213: Underwriters Laboratories (UL) Standard for Grooved Mechanical Joints and Fittings for Fire Service. FM (Factory Mutual) Certification: FM Global has specific standards for grooved pipe couplings and related components used in fire protection systems. Quality Control： Advanced equipment guarantee the production of high quality angle pad grooved pipe coupling. Advantages of DISA moulding line: 1. High quality precise casting less scrap and lower finishing costs. 2.High Production Efficiency (1). Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes (2). higher profitability over a longer service life. 3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant) High-precision, hydraulicly driven mould transport, no shifting, distortion, or displacement of moulds. The advantage of the sand supply system: The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability. Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc. From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highest and most consistent quality products are supplied to our valued customers. Application and Case Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc. These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building, Wuhan Expo Building and other famous landmark projects.

Minimum Order: 1 bags

Code：1221 Size: 1/2”-1” Material: BS EN 1562,EN-GJMB-350-10,KTH350-10 Dimension: BS EN 10242 Thread: ISO 7-1,BS 21,BSPT Pressure Rating: PN16/PN25 Surface Treatment: Hot-dip Galvanized，Electro Galvanized，Black Certificate: UL Listed / FM Approved / NSF 61 Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems Products Details Malleable Iron 1221 Side Outlet Elbow. A side outlet elbow is a pipe fitting used to change the direction of a pipe, usually to a 90-degree angle. It is called a “side outlet” because it allows pipes to be connected horizontally while also diverting flow in different directions, usually vertically or diagonally. These fittings are commonly used in drainage and ventilation systems, particularly in areas where pipes need to pass through corners or connect to different parts of the pipe network. Side outlet elbows offer several advantages in piping systems: 1. Direction Change: Side outlet elbows allow pipes to effectively change direction, especially when vertical or diagonal changes from horizontal pipes are required. 2. Space Optimization: In tight spaces or areas where pipes need to maneuver around obstacles, side outlet elbows provide a compact solution, allowing pipes to change direction without the need for additional fittings. 3. Versatility: Side outlet elbows offer versatility in duct configurations, allowing for a variety of layouts and designs while maintaining proper flow direction and functionality. 4. Reduce leaks: Properly installed side outlet elbows with the correct seals and connections help minimize the risk of leaks when the direction of your ductwork changes. 5. Aesthetics: These fittings allow for cleaner turns and transitions between horizontal and vertical pipes, giving the pipe installation a cleaner, more organized appearance. 6. Easy to Install: Side outlet elbows are relatively easy to install, saving time and effort during the assembly of your piping system. Overall, the advantages of side outlet elbows contribute to efficient and effective duct design, ensuring proper drainage and ventilation within the building infrastructure.

Minimum Order: 1 bags

Code：120 Size: 1/4”-6” Material: BS EN 1562,EN-GJMB-350-10,KTH350-10 Dimension: BS EN 10242 Thread: ISO 7-1,BS 21,BSPT Pressure Rating: PN16/PN25 Surface Treatment: Hot-dip Galvanized，Electro Galvanized，Black Certificate: UL Listed / FM Approved / NSF 61 Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems Products Details The Malleable Iron Elbow is a kind of pipe fitting made of malleable iron, usually used for pipeline directional changes and pressure losses. The angle of the Malleable Iron Elbow can be 45 degrees, 90 degrees, 180 degrees and other angles according to the specific pipeline layout and use requirements. Fluid tech can do any angles as the customer’s requirements. And the surface can be black, hot-dip galvanized and electrical galvanized. The black one is used for fire-fighting system and it will be painted with red color. And the galvanized one is mainly used for water system. The advantage of galvanized one Galvanized malleable iron fittings have the following advantages compared to ordinary iron fittings: 1. Corrosion resistance: Galvanized iron fittings have a zinc coating that protects the fitting from rusting or corroding, and also provides a sacrificial layer between the fitting and the environment, further protecting the fitting from rust or corrosion damage. 2. Longevity: Galvanized iron fittings’ resistance to rust and corrosion allows them to have a longer service life than ordinary iron fittings, particularly in outdoor applications or damp environments. 3. Easy to maintain: Galvanized iron fittings do not require painting or other surface finishes to protect them from rust or corrosion, making them easy to maintain over time. 4. High strength: Galvanized iron fittings can be made stronger than ordinary iron fittings, allowing them to be used in high-stress applications. 5. Easy installation: Galvanized iron fittings are easy to install and maintain, and they can also be used with various types of pipes, which can effectively reduce installation and maintenance costs. Application and Case Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc. These products are used in many projects , such as Beijing Airport, Shanghai World Trade Center, Canton Tower and other famous landmark projects.

Minimum Order: 1 bags

Code:130 Size: 1/8”-6” Material: BS EN 1562,EN-GJMB-350-10,KTH350-10 Dimension: BS EN 10242 Thread: ISO 7-1,BS 21,BSPT Pressure Rating: PN16/PN25 Surface Treatment: Hot-dip Galvanized，Electro Galvanized，Black Certificate: UL Listed / FM Approved / NSF 61 Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems Products Details Malleable Iron pipe fittings 130 Equal Tee . Code is 130. Main outlet and branch outlet is same. We have three type tee, heavy type tee with UL/FM certificate ,medium type tee and light beaded tee. According to the Surface treatment, hot dip Galvanized tee ,electro plate Galvanized tee or cold Galvanized tee ,and black tee. According to the Threaded Standard, there are have NPT Thread tee ,BSP thread tee ,and ISO228 thread tee. If the main outlet and branch outlet is difference ,we called it is Tee reducing. How are fittings classified? Pipe fittings (Pipe fitting) is a general term for the parts and components in the pipeline system that play the role of connection, control, direction change, diversion, sealing, support and so on. Steel pipe fittings are all pressure-bearing pipe fittings. According to different processing technology, it is divided into four categories, namely butt welded pipe fittings (there are two kinds of welded seams and no welds), socket welding and threaded pipe fiats, and flange pipe fittings. By use: 1. The pipe fittings used for connecting pipes to each other are: flange, union joint, pipe hoop, clamp, ferrule, throat clamp, etc 2. Pipe fittings that change the direction of the pipe: elbow, elbow. 3. Pipe fittings that change the diameter of the pipe: reducer (reducer), reducer elbow, branch pipe table, reinforcing pipe. 4. Increase the pipe fittings of the pipeline branch: tee, four-way. 5. Pipe fittings for pipeline sealing: gaskets, raw material belts, line hemp, flange blinds, pipe plugs, blinds, heads, welding plugs. 6. Pipe fittings for pipeline fixation: snap rings, drag hooks, lifting rings, brackets, brackets, pipe cards, etc. Application and Case Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as Beijing Airport, Shanghai World Trade Center, Canton Tower and other famous landmark projects.

Minimum Order: 1 bags

Code：90 Size: 1/8”-6” Material: BS EN 1562,EN-GJMB-350-10,KTH350-10 Dimension: BS EN 10242 Thread: ISO 7-1,BS 21,BSPT Pressure Rating: PN16/PN25 Surface Treatment: Hot-dip Galvanized，Electro Galvanized，Black Application: Fire Protection, Waterworks, HVAC, Plumbing, GAS, Irrigation, or other piping systems Products Details Malleable cast iron elbows, Beaded Type Elbow（round edge elbows） and Plain type Elbow （edgeless elbows）. The products include galvanized Beaded Type Elbow and black Beaded Type Elbow. Galvanized Plain type Elbow and black Plain type Elbow. Products are generally British standard threads, generally British standard and German DIN standard. Galvanized pipe fittings are mostly used in water systems, HVAC systems, industrial water systems and fire protection systems. Galvanized fittings have good anti-corrosion properties and are durable and will not rust. Quality Control： Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc. From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highest and most consistent quality products are supplied to our valued customers. Application and Case Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as Beijing Airport, Shanghai World Trade Center, Canton Tower and other famous landmark projects.

Minimum Order: 1 bags

The All Flanged Cross is suitable for a wide range of applications. It can be used in the oil and gas industry, petrochemicals, water treatment plants, and other industrial settings. All Flanged Cross is an essential component used in piping systems to connect four pipes at a cross-junction. It ensures a smooth flow of media in all four directions while maintaining the structural integrity of the pipeline. Made from high-quality materials, All Flanged Cross is designed to withstand high pressure, temperature, and corrosive environments. It features flanged ends that allow for easy installation and maintenance, making it convenient for use in different applications. All Flanged Cross is widely used in industries such as oil and gas, chemical processing, petrochemical, power generation, and more. It is also suitable for residential and commercial applications, including HVAC systems, water supply, and plumbing. All Flanged Cross comes in different sizes and materials to cater to diverse needs. The standard materials used include carbon steel, stainless steel, alloy steel, and other exotic materials with various grades and specifications. To ensure customer satisfaction, All Flanged Cross meets and exceeds industry standards and regulations such as ASME, ANSI, and API. Testing and inspection are performed to ensure product quality and reliability. In conclusion, All Flanged Cross is a reliable and efficient Ductile Iron Pipe Fitting in piping systems that ensures smooth media flow in all four directions. High-quality materials, convenient installation, and a wide range of applications make All Flanged Cross a valuable asset in various industries. Trust us to provide you with reliable products that meet industry standards to keep your pipeline running smoothly.

Self-drilling ESS bit used for strong fractured rock formations. Self-drilling anchor ESS bit, also known as self-drilling anchor TC (tungsten carbide) button bit. ESS bit used as a drill string and flushed with water, air or cement grout. It's usually used for strong fractured rock formations.

Minimum Order: 50

Carbon Steel Seamless Pipe Company: JIS G3455 STS370, STS410, STS480 Seamless Pipe, OD 19.05-114.3 mm, WT 2.0 mm-14 mm, Length max 16000 mm. Product: JIS G3455 Carbon Steel Seamless Pipe. OD: 19.05 mm-114.3 mm. WT: 2.0 mm-14 mm. Length: max 16000 mm. Grades: STS370, STS410, STS480. Applications: Applied to high-pressure service and high-temperature service. Working temperature: 350℃.

Minimum Order: 1 bags

JIS G3452 Carbon Steel Pipe: JIS G3452 SGP Carbon Steel Pipe, OD 5-420 mm, Galvanzied, KS D 3507, ASTM A53, API 5L, DIN 2440, DIN 2441, BS 1387, BS 3601. Product: JIS G3452 SGP Carbon Steel Pipe. Other standards: KS D 3507, ASTM A53, API 5L, DIN 2440, DIN 2441, BS 1387 and BS 3601. Outer Diameter: 5 to 420 mm. Finish: Galvanzied. Applications: applied to steam, water, oil, gas pipelines.

Minimum Order: 1 bags

IBC Tote Tank Adapter/Coupling 2" BSP Female to DIN51 Female Plastic Drum Fitting Connector DIN 51 Female to 2" BSP Female IBC Adaptor Art No.:DIN 51 Female to 2" BSP Female IBC Adaptor Material:PP Packing:200PCS/CTN < , br>G/N Weight:9.5/8.5KGS Carton Size:52 x 36 x 25cm

Minimum Order: 100

PP IBC Tote Tank Adapter/Fitting Connector 2" BSP Female to 59mm Female Plastic Drum Coupling 59MM Female to 2" BSP Female IBC Adaptor Art No.:59MM Female to 2" BSP Female IBC Adaptor Material:PP Packing:200PCS/CTN < , br>G/N Weight:11.5/10.5KGS Carton Size:58 x 36 x 26cm

Minimum Order: 100