Other Passive Components

Model Number: UIYCT50ANF6 Frequency Range: DC-6GHz Power:50W VSWR:1.25 Connector Type: N Female Impedance: 50Ω

Minimum Order: 1 bags

Model Number: UIYCT80ANF6 Frequency Range: DC-6GHz Power: 80W VSWR: 1.25 Connector Type: N Female Impedance: 50Ω

Minimum Order: 1 bags

Model Number: UIYCT100AN3 Frequency Range: DC-3GHz Power: 100W VSWR: 1.15 Connector Type: N Male Impedance: 50Ω

Minimum Order: 1 bags

Model Number: UIYCT200AN3 Frequency Range: DC-3GHz Power:200W VSWR:1.15 Connector Type: N Male Impedance: 50Ω

Minimum Order: 1 bags

Model Number: UIYCI4550A400T512SF Frequency Range: 400~512MHz Bandwidth: 30% Insertion Loss: 0.5dB Isolation: 20dB VSWR:1.25 Forward Power: 100W Reverse Power: 30W Connector Type: SMA-F Temperature: -30~+70℃ Dimension: 45×50×24mm

Minimum Order: 1 bags

Introduction of PAGOODA alloy chip resistors: Regular series: 1206, 2010, 2512, 2725, 2728, 2817, 4527; Resistance range: 02mR~1000mR Rated power: 05W~3W Error:+01%±0.25%±0.5%,±1%,±5% The maximum power of alloy resistors can reach 3W, and the minimum TCR is ±50PPM/℃. It is suitable for reflow soldering and wave soldering. It is suitable for current detection resistors, such as power supply circuits and engine circuits. since The dynamic mounting equipment is matched with high mechanical strength, superior high frequency characteristics, and meets the requirements of the RoHS directive. Mainly used in overcurrent protection of switching power supply audio equipment, voltage regulators, power converters, chargers, car engine controllers, portable equipment, etc. WeChat: pskj13622678159 whatsapp: +86 13794963328 Alibaba International Station: https://mlccpagooda.en.alibaba.com/minisiteent , rance.html? spm=a2700.details.cordpanyb.2.766f6 , 411xYsc5I&from=detail&productId=1600474189 915

Minimum Order: 4000

PAGOODA chip inductor introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225 4532, 5650 Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH 1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH...... Error: J=+5%K=±10%M=±20%, N=±30% Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, maintains the inductance when the current allows, and has the characteristics of low square resistance. High Current Slow down saturation and maintain high current characteristics Low RDC Improves high current efficiency through low branch resistance PAGOODA high-end technology electronic component manufacturers, chip inductors have complete specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire WeChat: pskj13622678159 whatsapp: +86 13794963328

Minimum Order: 4000

Introduction of PAGOODA varistor: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA. PAGOODA high-end technology electronic component manufacturers, varistor specifications are complete, can provide samples, quality assurance, comprehensive technical support, welcome to inquire WeChat: pskj13622678159 whatsapp: +86 13794963328

Minimum Order: 4000

Model Number: UIYWTCWR187A394T599SF Frequency Range:3.94~5.99GHz Insertion Loss:0.15dB VSWR:1.15 Connector Type (Waveguide): WR187(BJ48) Connector Type (Coaxial): SMA Female CW Power: 100W Peak Power: 3KW Temperature: -55~+85℃ Frequency range 0.32 to 112GHz. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags

Model Number:UIYDC3232A Frequency Range:0.7~3.1GHz Bandwidth:30% Insertion Loss:0.3 dB Isolation:23dB VSWR:1.15 Forward Power:200W Reverse Power:200W Connector Type: TAB Temperature: -40~+85℃ Dimension:32*32*11mm Frequency range 10MHz to 40GHz, up to 2000W power. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags

Model Number: UIYSW90A82T124 Frequency Range: 8.2~12.4GHz Insertion Loss:0.4dB VSWR:1.1 Connector Type (Waveguide): WR90 Connector Type (Coaxial): SMA Female CW Power: 100W Peak Power: 3KW Temperature: -55~+85℃ Frequency range 0.32 to 112GHz. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags

Model Number:UIYDI2020A Frequency Range: 0.45~3.0 GHz Bandwidth: 30% Insertion Loss:0.3dB Isolation:23dB VSWR:1.2 Forwar , d Power: 100W Reverse Power: 30W Connector Type: TAB Temperature: -40~+85℃ Dimension:20*20*10.6mm Frequency range 10MHz to 40 GHz, up to 2000W power. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags

Model Number:UIYDC1212B Frequency Range: 0.7~10.0GHz Band width:30% Insertion Loss:0.3dB Isolation:23dB VSWR:1.2 Forwar , d Power:60W Reverse Power:60W Connector Type:TAB Temperature: -40~+85℃ Dimension:12.7*12.7*8 mm

Minimum Order: 1 bags

Model Number:UIYCDC12060A4P Frequency Range:45~270MHz Ports:4 Port Bandwidth:40% Insertion loss:0.8dB Isolation:50 dB VSWR:1.15 Forward Power:200W Reverse Power:200W Connector Type: N SMA Dimension:120*60*28mm

Minimum Order: 1 bags