Other Passive Components

SINY OPTIC-COM CO.,LTD.was founded in 2008, is ISO9001 and ISO14000 passive components manufacturer in China. 1550nm SMT Optical Isolator is widely used for LIDARD Laser Packaging and Tunable Laser. 1550nm SMT Single Stage Optical Isolator and Dual Stage Optical Isolator are available. Clear Aperture:CA0.4mm to CA3.0mm are available SINY optical Isolator production capacity is 1.5KK/Month. SINY optical Isolator is High Isolation, Low Insertion Loss. Please contact us for special requirement.

Minimum Order: 50

Introduction of alloy chip resistors Introduction of PAGOODA alloy chip resistors: Regular series: 1206, 2010, 2512, 2725, 2728, 2817, 4527; Resistance range: 02mR~1000mR Rated power: 05W~3W Error:+01%±0.25%±0.5%,±1%,±5% The maximum power of alloy resistors can reach 3W, and the minimum TCR is ±50PPM/℃. It is suitable for reflow soldering and wave soldering. It is suitable for current detection resistors, such as power supply circuits and engine circuits. since The dynamic mounting equipment is matched with high mechanical strength, superior high frequency characteristics, and meets the requirements of the RoHS directive. Mainly used in overcurrent protection of switching power supply audio equipment, voltage regulators, power converters, chargers, car engine controllers, portable equipment, etc.

Minimum Order: 4000

Varistor Pingshang Technology Varistor Introduction: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA. ? Pingshang Technology is a high-end technology electronic component manufacturer with complete specifications of varistors, providing samples, quality assurance, and comprehensive technical support. Welcome to inquire

Minimum Order: 4000

Super capacitor PAGOODA super capacitor introduction Rated voltage: 2.7V, 30V, 36V, 3.8V, 5.0V, 5.5V 6.0 10.8V 135V 48.0V……. Regular volume: 0612, 0813, 1020, 1225, 1625, 1840 2245, 3050, 3569... Rated capacity (F): 104, 224, 334, 474, 504, 105, 155, 205305, 505705, 106, 206, 256 356 506308... Error: X=-10%~+30% V=-10%~+10% M=-20%~+20%, T=-20%~+80% The supercapacitor has a fast charging speed. It can reach more than 95% of its rated capacity after charging for 10 seconds to 10 minutes. Super high current discharge capacity, high energy conversion efficiency, small process loss, high current energy cycle efficiency ≥ 90%; high power density, up to 300W/KG~5000W/KG, equivalent to 5~10 times that of batteries; The raw material composition, production, use, storage and dismantling process of the product are free of pollution, which is an ideal green power source; the ultra-low temperature characteristics are good, and the temperature range is wide from -40°C to +85°C; the detection is convenient, and the remaining power can be directly read out. Pingshang Technology is a high-end technology electronic component manufacturer, with complete specifications of super capacitors, samples, quality assurance, and comprehensive technical support are available. Welcome to inquire

Minimum Order: 4000

Introduction of alloy chip resistors Introduction of PAGOODA alloy chip resistors: Regular series: 1206, 2010, 2512, 2725, 2728, 2817, 4527; Resistance range: 02mR~1000mR Rated power: 05W~3W Error:+01%±0.25%±0.5%,±1%,±5% The maximum power of alloy resistors can reach 3W, and the minimum TCR is ±50PPM/℃. It is suitable for reflow soldering and wave soldering. It is suitable for current detection resistors, such as power supply circuits and engine circuits. since The dynamic mounting equipment is matched with high mechanical strength, superior high frequency characteristics, and meets the requirements of the RoHS directive. Mainly used in overcurrent protection of switching power supply audio equipment, voltage regulators, power converters, chargers, car engine controllers, portable equipment, etc. Pingshang Technology is a high-end technology electronic component manufacturer with complete specifications of alloy chip resistors, providing samples, quality assurance, and comprehensive technical support. Welcome to inquire: 13622673179

Minimum Order: 4000

SMD magnetic beads, SMD inductors Pingshang Technology's chip inductor introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225 4532, 5650 Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH 1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH...... Error: J=+5%K=±10%M=±20%, N=±30% Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power to ICs. The corresponding inductor is used in the power supply circuit, and the inductance is maintained when the current is allowed, and it has the characteristics of low square resistance. High Current Slow down saturation and maintain high current characteristics Low RDC Improves high current efficiency with low branch resistance

Minimum Order: 4000

Varistor Varistor Pingshang Technology Varistor Introduction: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA.: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA.

Minimum Order: 4000

Introduction of alloy chip resistors Introduction of PAGOODA alloy chip resistors: Regular series: 1206, 2010, 2512, 2725, 2728, 2817, 4527; Resistance range: 02mR~1000mR Rated power: 05W~3W Error:+01%±0.25%±0.5%,±1%,±5% The maximum power of alloy resistors can reach 3W, and the minimum TCR is ±50PPM/℃. It is suitable for reflow soldering and wave soldering. It is suitable for current detection resistors, such as power supply circuits and engine circuits. since The dynamic mounting equipment is matched with high mechanical strength, superior high frequency characteristics, and meets the requirements of the RoHS directive. Mainly used in overcurrent protection of switching power supply audio equipment, voltage regulators, power converters, chargers, car engine controllers, portable equipment, etc.

Minimum Order: 4000

Introduction of SMD inductors: Volume: 0402, 0603, 0805, 1206, 2520, 3225 4532, 5650 Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH 1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH...... Error: J=+5%K=±10%M=±20%, N=±30% Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, and the inductance is maintained when the current is allowed, and it has the characteristics of low square resistance. High Current Slow down saturation and maintain high current characteristics Low RDC Improves high current efficiency with low branch resistance Prices may fluctuate daily, please contact me if needed!

Minimum Order: 4000

Pingshang Technology Varistor Introduction: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA. Prices may fluctuate daily, please contact me if needed!

Minimum Order: 4000

Thermistor Pingshang Technology thermistor introduction: Series: PTC, NTC Common sizes (SMD): 1210, 1206, 0805, 0603 and 0402... Commonly used resistance values: 12, 52, 102, 100Q, 1K, 10K, 50K, 100K.... Common errors are: ±1%, ±2%, ±3%, ±5%, ±10%, ±20%, etc. Prices may fluctuate daily, please contact me if needed!

Minimum Order: 4000

Pingshang Technology Varistor Introduction: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; its resistance value should be close to the insulator in the working state and reach the megohm level or above. The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA. Prices may fluctuate daily, please contact me if needed

Minimum Order: 4000

Detailed description of precise patch resistance Series: 0805 Resistance: 0R-500M 0-22M complete series Power: 1/20W-1W Deviation: D=+0.5%, B=+0.1% Features of Precision Patch Resistor Products 1. The resistance error is (+) 0.5%, and the temperature coefficient is (+) 50 ppm/C. 2. Small in size and light in weight; 3. Suitable for reflow and wave soldering; 4. The electrical performance is stable and reliable. 5. Low cost of assembly and matching with automatic mounting equipment; 6. Superior mechanical strength and high frequency characteristics; 7. Compliance with ROHS directive requirements. 8. Applications include handheld products, computer products, industrial and medical instruments, etc. PAGOODA Precision Patch Resistor Product Parameters and Characteristics British (in) metric (mm) resistance voltage rating 0201 0603 0-47M 25V 1/20W 0402 1005 0-47M 50V 1/16W 0603 1608 0-47M 50V 1/16W, 1/10W 0805 2012-47M 150V 1/10W, 1/8W 1206 3216 0-47M 200V 1/8W, 1/4W 1210 32250-47M 200V 1/4W, 1/3W 1812 4832 0-47M 200V 1/W 2010 50250-47M 200V 1/W, 3/4W 2512 64320-47M 200V 1W Contact me if you want WeChat: pskj13622678159

Minimum Order: 4000

SMD high power resistor product details Volume: 2010 (5025) 2512 (6432) Size: 2010=5.0*2.5, 2512=6.4x3.2 Resistance: 0R—500M 0Ω—22MΩ full range Power: 1W, 2W, 3W Deviation: F=±1%, J=±5% Packing: 4000 Feature description: Small size and light weight; Adapt to reflow soldering and wave soldering; Stable electrical performance and high reliability; Low assembly cost and matching with automatic placement equipment; High mechanical strength and superior high frequency characteristics; The lead-free terminal electrode of the product is RoHS compliant.

Minimum Order: 4000