Packaging Materials

Product Description 40μm CPI Film Heat Resistant Heat-Resistant Transparent Colorless Polyimide Film CPI Film Product Description Polyimide Film is excellent insulation material.The color is yellow and transparent,black ect. The density is 1.39-1.45, polyimide film has excellent resistance to high and low temperature, electrical insulation, adhesion, radiation resistance, resistance to medium, It can be used in the temperature range of -269℃ ~ 280℃ for a long time, can reach 400℃ in a short time.The tensile strength is 200MPa at 20℃ and greater than 100MPa at 200℃.Especially suitable for flexible printed circuit board substrate and various kinds of high temperature electrical insulation materials. Polyimide advantages: (1) excellent heat resistance.2) excellent mechanical properties.(3) good chemical stability and moisture and heat resistance.(4) good radiation resistance.(5) good dielectric performance. These properties are stable over a wide range of temperatures and frequencies.In addition, polyimide also has the characteristics of low temperature resistance, low expansion coefficient, flame retardant and good biocompatibility.Polyimide can be widely used in many fields due to its excellent comprehensive properties and diversity in synthetic chemistry. PI film is widely used in space technology, F motor, H motor, electrical insulation, FPC (flexible printed circuit board), PTC electrothermal film, TAB (pressure sensitive adhesive tape base material), aerospace, aviation, computer, electromagnetic wire, transformer, audio, mobile phone, computer, metallurgical, mining the electronic components industry, automobile, transportation, atomic energy industry and electronic industry, etc. Technical Data Sheet No. Test Item Unit Standard 25μm 30μm 40μ , m 50μm 75μm 100μm 1 Density g , /cm3 1.400±0.020 2 Tensile Strength Vertical MPa ≥135 Horizonta , l ≥115 3 Elongation ratio Vertical and Horizontal % ≥35 4 Shrinkage 150

Description PC film is short for Polycarbonate film. It is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic. Advantage It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength and compression strength; has good heat resistance and low temperature resistance, and has stable mechanical properties and dimensions in a wide temperature range Stability, electrical properties and flame resistance, can be used for a long time at -60 ~ 120 ℃; no obvious melting point, in the molten state at 220-230 ℃; rigidity, resin melt viscosity is large; water absorption rate is small, shrinkage rate is small , Small creep, high dimensional accuracy, good dimensional stability, small film permeability; self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil and acid resistant. Specification Code Thickness (mm) Width*Length (mm*m) Foot*Foot Kg/roll Pound/R R/PIt PC6811 Film 0.125 930*400 3’*1312’ 55.8 128 6 0.175 930*350 3’*1148’ 68.4 150.7 6 0.2 930*325 3’*1066’ 72.3 159 6 0.25 930*300 3’*984’ 83.7 184.5 6 0.3 930*250 3’*820’ 83.7 184.5 6 0.375 930*200 3’*656’ 83.7 184.5 6 0.5 930*150 3’*492’ 83.7 184.5 6 Note:The Size can be customized Application: Widely used in such as: the hat, sunglass, windows, aviation sheet, lighting, electroplating, vacuum forming, dyeing, etc. High Tensile Strength Odorless Gloss Polycarbonate Film 0

Non-asbestos Beater Sheet/Paper Passed non-asbestos content certification of the third-party testing organization. Passed ROHS certification of the third-party testing organization. The other name: Non-asbestos paper, asbestos free paper,Non-asbestos latex paper, Non-asbestos emulsion paper. It is 100% asbestos free. Passed non-asbestos content certification of the third-party testing organization. Passed ROHS certification of the third-party testing organization. Non-asbestos beater paper,it is made from synthetic latex, aramid fiber and filling material.It is an ideal substitute of asbestos latex sheet/paper.After combining with tanged tinplate,the non-asbestos composite beater sheet is ideal for various kind of cylinder head gasket and other automotive accessory gaskets. Especially for petrol engine kind. This series include: Non-asbestos beater paper, Fuyuan Vulcanized non-asbestos beater sheet, 1) Non-asbestos beater paper：It don’t vulcanize,usually it is used to be composited with tinplate to non-asbestos composite sheet for cylinder head gasket sheet material. 2) Vulcanized non-Asbestos beater sheet, it is based non-asbestos beater paper and by vulcanized, it has smooth face and high density,it can be cut into all kinds of gasket directly for engine sump,gearbox seal gasket. Usage: Suitable to sealing lubricating oil at highest temperature -80～250℃ Normal color: Grey, Black. Hebei Fuyuan Sealing Materials Standard size: Thickness: 0.3~1.2mm Width: 1500mm  Tolerance: ±5% Length: 5m,10m or its integral multiple Special sheet sizes and other size thickness upon request.

Asbestos Beater Sheet/Paper Asbestos beater sheet is made from synthetic latex, asbestos fiber and filling material. Normal used for automobile, agricultural machinery, motorcycle, engineering machinery etc., suitable for lubricating oil under temperature 200℃ ,usually it will be composited with tinplate to asbestos composite sheet. This series include: Asbestos beater paper, Vulcanized asbestos beater sheet, 1) Fuyuan Asbestos beater paper ,Usually it is used to be composited with tinplate to asbestos composite sheet. 2) Vulcanized Asbestos beater sheet, it is based asbestos beater paper and by vulcanized, it has smooth face and high density,it can be cut into all kinds of gasket directly for engine sump,gearbox seal gasket. Size: Thickness: 0.5mm to 2mm, Length: 500mm,1000mm,1200mm,1500mm,width:500mm,1000mm. , Color: Grey, Black, White, graphite,Green,Red  FAQs   Q: Are you factory, or only a trading company? A: Factory, and our factory is located in Wangtong town, Jing county, Hengshui, Hebei Q: Could I get some samples, and how? A: No problem, we,Fuyuan Sealing Materials, provide free samples, and it is only needed for you to pay for the shipping charge, your courier account is also ok(such as DHL). Q: Can you give me some discount? A: Usually the discount depends on the quantity. However we can discuss it. Q: What's the payment terms? A: Our normal practice: 30% deposit of total amount before production, and 70% balance payment before shippment. However this is open for discussion. Q: How can I get the quotation? A: We usually quote within 24hours after we get your inquiry. If you are very urgent to get the price please call us or tell us in your email so that we will regard your inquiry priority. Q: What is your terms of delivery? A: We accept EXW,FOB,CIF,ect. You can choose the one which is the most convenient or cost effective for you. Q: Can you do further process? A: Sure. We also can help our customers do the further such as printing and punching.

Non-asbestos Rubber Sheet Serie Non-Asbestos Jointing Sheets are made of special non-asbestos heat-resisting fiber, heat-resisting packing material, and special nature or NBR rubber compound heating and compression molding it. 1) Fuyuan Non-asbestos rubber sheet series include: NXB200, NXB300, NXB350 Uses: Used for the equipment in water,steam,etc.and used as sealing material in the joints of pipeline Working pressure : 1.5～8.0 MPa ,Working temperature : 200 ～350℃ 2) Oil-resistance non-asbestos rubber sheet series include: FNY150, FNY250, FNY300, FNY350 Uses: Substitution of corresponding models of asbestos rubber sheet , Mainly used as the aviation liquid the motive's kerosene, lubricant, the fuel oil and cold air system to join together the seal completely of place the sealing gasket material. Working pressure : 7.0～12 MPa ,Working temperature : 150 ～350℃ Fuyuan Sealing Oil Resistant Asbestos Sheet Available Sizes: Thickness: 0.5 to 5mm  1500 x 4500mm,  1500 x 4100mm,  1300 x 3810mm,  1500 x 2000mm, 1500 x 1500mm,  1500 x 1360mm,   1500 x 1000mm ,  1270 x 1270mm,  The other size is optional or according to the requirements of customers. At the same time, steel wire net inserted (coated graphite) is available. Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.

Asbestos rubber sheet with wire net inserted Asbestos jointing sheet, compressed asbestos fiber jointing sheet, CAF gasket sheet, asbestos sheet, paronite, etc. Made of Fuyuan good asbestos Fiber rubber with steel wire mesh inserted and compound heating and compression molding it (it can be coated with graphite on the surface one side or two side). Used for the equipment in water,steam,etc.and used as sealing material in the joints of pipeline. Working pressure : 3～14 Mpa, Max working temperature: 150 ～ 450℃ This series include: JXB150,JXB200,JXB250, JXB350,JXB450. Available Sizes: Thickness: 1.0 to 6mm 4500 x 1500mm,   4100 x 1500 mm,  3850 x 1300 mm,  1270 x 1270 mm,  1500 x 2000 mm,  1500 x 1500 mm ,  1500 x 1350 mm,  1500 x 1000 mm ,  The other size is optional or according to the requirements of customers. Packing: in wooden pallet of about 1000 kg, 2000kgs net each. Hebei Fuyuan Sealing Materials Co., Ltd. is an Asbestos Fiber Sheet Manufacturer.

Asbestos Rubber Sheet Asbestos Rubber Sheet For Sale Fuyuan Sealing Materials Asbestos Jointing Sheet, Compressed Asbestos Fiber Jointing Sheet, CAF Gasket Sheet, Asbestos Sheet, Asbestos Jointing Paronite,  Made of asbestos Fibre, rubber and heat-resisting packing material, compressing it to thick paper .Used for the equipment in water,steam,etc.and used as sealing material in the joints of pipeline. This series include: XB150,XB200,XB250,XB300,XB350,XB400,XB450,XB510. With steel wire inserted and coated with graphite on the surface is applicable Available Sizes: Thickness: 0.3 to 6mm 4500 x 1500mm,   4100 x 1500 mm,  3850 x 1300 mm,  3810 x 2700 mm 1500 x 2000 mm,  1500 x 1500 mm ,  1500 x 1350 mm,  1500 x 1000 mm,  1270 x 1270 mm,  The other size is optional or according to the requirements of customers. Packing: in roll or in wooden pallet of about 1000 kgs, 2000kgs net each. view products:https://www.cn-sealings.com/asbestos-shee , t/ FAQs Q: Are you factory, or only a trading company? A: Factory, and our factory is located in Wangtong town, Jing county, Hengshui, Hebei Q: Could I get some samples, and how? A: No problem, we provide free samples, and it is only needed for you to pay for the shipping charge, your courier account is also ok(such as DHL). Q: Can you give me some discount? A: Usually the discount depends on the quantity. However we can discuss it. Q: What's the payment terms? A: Our normal practice: 30% deposit of total amount before production, and 70% balance payment before shippment. However this is open for discussion. Q: How can I get the quotation? A: We usually quote within 24hours after we get your inquiry. If you are very urgent to get the price please call us or tell us in your email so that we will regard your inquiry priority. Q: What is your terms of delivery? A: We accept EXW,FOB,CIF,ect. You can choose the one which is the most convenient or cost effective for you. Q: Can you do further process? A: Sure. We also can help our customers do the further such as printing and punching. Fuyuan Sealing Materials Product Data Sheet Item XB510 XB450 XB400 XB350 XB300 XB250 XB200 XB150 Tensile strength MPa≥ 21 19.0 15.0 12.0 9.0 7.0 6.0 5.0 Burning Loss %≤ 28 30 Compressibility % 7 ～ 17 Rebound degree 45 40 35 Creep Stress-relaxation≤ 50 Aging Coefficient ≥ 0.9 Density   g/cm³ 1.9 ～ 2.0 Normal temperature Pliability Bend 180 degree on the round column (the column diameter is 12 multiple sample thickness),No crack Nitrogen leakage rate[(ml/h.mm)] 500 Steam Airtightness Temperature  ℃ 500～510 440～450 390～400 340～350 290～300 240～250 190～200 140～150 Steampressure  MPa 13～14 11～12 8～9 7～8 4～5 3～4 2～3 1.5～2 Request Keep for 30 minutes without Leakage

PET Metalized Gold Thermal Lamination Film 1.Material:PET film+EVA glue; 2.Glossy; 3.Thickness:22mic, 24mic; 4.Width:3"core:200mm-1600mm; 5.L , ength:2000M,3000M,4000M. 6.Double Corona treatment.

Minimum Order: 20 square metres

Blue PET Protective Film Thickness: 0.06 ~ 0.12 Viscosity: 1-90g Substrate thickness: 0,05; 0.075; 0.1 Adhesive system: silica gel Glue thickness (mm) + 0.002mm: 0.01; 0.02 Total thickness (mm): 0.06; 0.085; 0.11; 0.12; 0.06; Release film thickness (mm): 0.025; 0.038; 0.05 Peel force (g / 25 mm): 1-2; 2-4; 6-9; 9-12; 10-15; 30-40; 60-90; Specification (mm * m): 1040 * 200; Application: electronic products and LCD protection, foam protection, die-cutting protection, plastic material protection, metal material protection and other fields lens, screen engineering protection, plastic case keyboard protection, all kinds of film tape die cutting carrier and paste, waste discharge Product features: 1. has suitable adhesive strength to metal, plastic, glass and other objects to be pasted, and has good retention performance; 2. The surface of the protective film is smooth and smooth; 3. Heat resistance; 4. Stick on the surface of the object to be pasted without residual stains. application area 1. All kinds of lens and screen engineering protection; 2. Temporary transfer and fixation of electronic products; 3. Die cutting carrier, transfer paste and waste disposal of all kinds of film and tape; 4. Surface protection during product transportation.

Minimum Order: 100

Grey PET Protective Film Substrate thickness (mm): 0.05 Glue thickness (mm): 0.015 Release film thickness (mm): 0.050 180 ° peeling force (g / 25mm) ≤ 5g Transmittance ≥ 78% Haze ≤ 0.9% It has a light transmittance of more than 95%, high surface hardness treatment, good weather resistance and temperature resistance, low temperature resistance, good adsorption capacity, no clothing surface, no residual glue, refreshing and comfortable feeling, preventing direct contact of the object surface, preventing surface scratch, and no bubbles in the coating. (it is only applicable to places with smooth appearance, but not for those with rough surface such as sanding board) Adhesion: medium adhesion 6.5c Specification: total width 1240 mm, length 150 m, weight about 14 kg (various widths can be customized) Product application: mobile phone cover. Stainless steel plate, aluminum plate, aluminum alloy profile, plastic steel profile and doors and windows, aluminum plastic plate, fluorocarbon plate, mirror panel, sandwich color steel plate, fireproof board, decorative panel, plexiglass plate, PS, PE, PVC plate, sunshine board (polycarbonate board), burglarproof door, label, coated glass, high-grade furniture, high-grade handicraft, electrical cabinet, computer shell, automobile lamps, floor, etc It can be used in various fields such as panel, shell of household appliances, instruments and meters.

Minimum Order: 20 square metres

Hot Melt Glue Aluminum Tape Total thickness (mm): 120; 200; 260; 360; 450 Stripping force (n / in): ≥ 12; ≥ 14; ≥ 16; ≥ 19; Tensile strength (n / in): ≥ 17; ≥ 22; ≥ 30; ≥ 40; ≥ 45; Aluminum foil is used as base material, release paper as substrate, coated with rubber, water glue or oil glue. It is suitable for refrigeration and reflection occasions, such as indoor air conditioning pipe, refrigerator, water heater, roof waterproof, temporary pipe opening, hot pipe sealing, etc.

Minimum Order: 100

BOPP Metallized Film, Aluminized BOPP Film application Widely used in gift packaging or other decorative packaging Characteristic Gen , eral purpose, non heat sealed, single corona Good metallic luster Good adhesion of aluminum layer Typical thickness 20μm、25μm、30μm Thicknes , s Deviation: ±3% Tensile strength MD:130Mpa TD: 240Mpa Elongation at break MD:200% TD: 70% Friction coefficient O / O: 0.50 Thermal shrinkage MD: 4.0% TD: 2.0%

Minimum Order: 50

Coextrusion Embossed Film Coextrusion film embossing roll, produced by German lefenhauser blowing machine, CO extruded, no glue, safe and reliable. Diamond embossing patent, vacuum more thoroughly, extend the shelf life of food. Most of them are suitable for home use. It can be used to package solid food and liquid food. It can be used for one-time use and more environmental protection and hygiene. Single / double embossed PA / PE, 9-layer coextrusion film PA is the surface layer with good puncture resistance Thickness range: 90-100um. Specification parameters: Thickness: 90, 95100um Heat sealing width: 8, 10 mm Width ≤ 800mm Cooking temperature 95 ℃ (30mins) Heat sealing temperature 120-175 ℃ Heat sealing time 1-3s Heat sealing pressure 200KPa Heat sealing method: 2 side seal Color: transparent, black, white, etc

Minimum Order: 100

Multilayer Co-extrusion Automatic Food Packaging Film The coextrusion film is more safe in food packaging safety. According to the different application fields, the formula and specifications will be different. It can be directly used in various bag making machine bags, or as composite materials to composite with other materials, so as to achieve more diversified packaging effects and functions. Specification parameters Thickness: 25 μ M-200 μ M Roll length: 2000 ~ 3000 m / roll Coil diameter: ≤ 550mm Barrel film width: 700-2200mm Film width: ≤ 2200mm Structure: 7 / 9 layer coextrusion Color: transparent / Black / White / Blue / green application Vacuum bag making film -- food vacuum packaging, electronic components, precision instruments, fragile products Bag making film of buffer gas column bag Bagged water (water film) Ton bag / space bag / bottom sealing bag / barrel material bag - used for packaging chemical raw materials, EPS and other transfer bags.

Minimum Order: 100