Other Optoelectronic Displays

Mechanical Specifications Touch points: 5 points Available size: 10.4~23.6 inches Glass: 3mm tempered glass Transmittance: >88% Shell material: Front shell: polycarbonate (PC), back shell: galvanized sheet (SGCC) Electrical Specifications Technical principle: Infrared block detection Infrared Touch Screen Touch accuracy: center <1mm, edge <2mm Power supply specifications: USB power supply (DC5V± 5%@500mA) Power consumption: <1.5W MTBF: 61000Hours Interface Types USB(default), COM Environmental Specifications Temperature: Run :-20~70°C Storage :-40~85°C Humidity: Operation :10%-90% RH40°C without condensation Storage :10%-90% RH,40°C without condensation Electrostatic protection: EN61000-4-2 2008:L4,Class B Contact discharge 8kV, air discharge 15kV Light resistance: greater than 150k Lux(sunlight) M C: CE,FCC Class B Compatible Dust and water resistance: IP65 on front Software Specifications Firmware upgrade: Support Calibration: Four-point calibration Device type: Touch mode, mouse mode Operating system: Windows (xp, 7, 8.1, 10), the Linux (2.6 or higher), Android (2.6 or higher), Vxwork (6.5 or higher)

Mechanical Specifications Touch count: 10 points Available size: 27~86 inches Glass: 3~6mm toughened glass or no glass Shell material: extruded aluminum structure or extruded tube structure Electrical Specifications Technical principle: Infrared block detection Touch accuracy: center <1mm, edge <1.2mm Power supply specifications: USB power supply (DC5V± 5%@500mA) Power consumption: <1.5W M T B F: 100,000Hours Interface Types USB (default), COM Large Touch Screen Overlay Environmental Specifications Temperature: Operation :-20~70°C Storage :-40~85°C Humidity: Operation :10%-90% RH40°C No condensation Storage :10%-90% RH40°C no condensation Electrostatic protection: EN61000-4-2 2008:L4,Class B Contact discharge 8kV, air discharge 15kV Light resistance: > 150k Lux(sunlight) E M C: CE,FCC Class B Compatible Dustproof and waterproof: front IP66(extruded tube + glass) Software Specifications Firmware upgrade: Support Calibration: Four-point calibration Device type: Touch mode, mouse mode Operating system: Windows (xp, 7, 8.1, 10), the Linux (2.6 or higher), Android (2.6 or higher), Vxwork (6.5 or higher)

An infrared touchscreen is characterized by a touch frame mounted in front of the display. This frame contains a printed circuit board equipped with a series of infrared LEDs and phototransistors hidden behind a bezel. The bezel protects these components from the external environment while allowing the infrared beam to pass through, creating a grid of invisible beams in front of the display. Principle of operation Infrared frame: The commercial infrared touch monitor is surrounded by a frame with integrated infrared light-emitting diodes (IR-LEDs) and phototransistors (sensors). IR Grid: The IR-LEDs emit an infrared beam that creates a grid of invisible light on the surface of the screen. Touch Detection: When a finger or any object touches the screen, the IR beam is blocked. The phototransistor detects this masking. Position Mapping: The sensor calculates the exact position of the touch based on where the IR beam is blocked. This data is then sent to the device's controller, which translates it into the appropriate action on the screen. IRTOUCH Infrared Touch Screen Monitor Features Durability and reliability: PROTECTED COMPONENTS: IR LEDs and sensors are protected by a bezel that makes the display resistant to physical wear and tear. Environmental resistance: Effective in harsh environments, resistant to dust, dirt and moisture. High clarity and brightness: Unobstructed display: There are no additional layers on the screen, maintaining the original clarity and brightness of the display. CLEAR IMAGE QUALITY: Ideal for HD applications due to minimal interference with screen visibility. Multi-touch functionality: Simultaneous touch points: Supports multiple touch points for complex gestures and multi-user interaction. Multiple Interactions: Ability to detect various gestures such as pinch, zoom, swipe and rotate. Multiple input methods: Any object detection: can be used with fingers, gloves, stylus or any object, providing flexibility in different use cases. Glove and stylus friendly environments: Ideal for industrial, medical or cold environments where gloves are required. Fast and accurate response: Fast touch detection: Immediate response to touch input ensures a smooth user experience. High Accuracy: Accurate touch point detection enhances the usability of the display. Easy integration and installation: Simple setup: Allows for easy installation and integration of a variety of display types and sizes. Compatibility: Works with most operating systems and software applications. Low Maintenance: Less wear and tear: Extremely low maintenance requirements as there is no physical pressure on the screen surface. Long service life: Designed for reliable performance over long periods of time. Customizable sizes and configurations: Various form factors: Available in different sizes and shapes to meet specific needs and applications. Flexible design: customizable configurations to meet unique industrial or commercial requirements.

A capacitive touch screen is a control display that utilizes the electrical properties of the human body as input. When a finger (or a specialized input device such as a stylus) touches the display, it detects when and where the user touches the display. As a result, capacitive displays can receive accurate input from very light touches. How does a capacitive touchscreen work? Capacitive touchscreens consist of a thin layer of conductive material, such as copper or indium tin oxide (ITO), printed on the underside of the insulating outer layer of the display. When a finger touches the screen, the contact point absorbs a small charge, effectively becoming a functional capacitor. The resulting change in the electrostatic field is then measured to pinpoint where the contact occurs. Types of Capacitive Touch Screens There are two main types of capacitive touch screen technology: projected and surface. Surface capacitance is the more basic of the two technologies, with only one side of the insulator coated with a conductive layer. In contrast, projected capacitance uses a matrix of rows and columns of one or two layers of conductive material. This grid pattern allows for superior precision and multi-touch functionality. Advantages of Capacitive Touch Screen Technology Multi-touch capability: With 10-point multi-touch support, our capacitive touch monitors enable smooth and precise touch interactions, allowing you to perform tasks efficiently. Wide range of sizes: From 7 inches to 55 inches, we offer a variety of sizes to cater to diverse needs and environments. High-definition visuals: Enjoy crisp, clear, and vibrant images with our full HD and 4K resolution options. Robust construction: Our monitors are built with industrial-grade components, ensuring durability and reliability even in the most demanding environments. Compatibility: Our capacitive touch monitors are compatible with various operating systems, including Windows, Linux, and Android. Customizable options: We offer customization options to suit your specific requirements, from touch technology to display size and more.

EARTHA D132 SMD Non-Adjustable Uplight Product Description Special Housing Designs And High-quality Optical Components Specifically For Demanding Visual Tasks To Provide Enhanced Visual Comfort Discreet And Compact Aesthetically Designed Architectural Outdoor Spotlight, ldeal For Glare-free Accent Lighting, Floodlighting And Wall Washing In The Outdoor Area. Technical Specifications SMD Non-Adjustable Inground Light Front cover: Stainless steel SUS316 Housing: 12#Die-casting grey powder coated aluminum. T=60-80μm Adhesion of ISO class 1/ASTM class 4B high temperature painting Driver: Constant current output, Constant current output Glass: Step tempered glass Mounting sleeve: ABS ELECTRONICS Power(Luminaire) 6W-10W Power Factor >0.9 Input Voltage DC12V DC24V DC36V DC48V AC110-130V AC110-240V AC220-240V  50/60Hz Driver Option Integral control gear Dmming Type ON/OFF, 0-10V, DALI, Triac, PWM, DMX512 Driver Integral control gear Optional Eectronic Accessories Plug, Leading Cable, Connection Cable, Junction box Connector 2/3/4/5 Pin

EARTHA D135 COB Beam Direction Adjustable Inground Light Product Description 1. 15 degree beam angle adjustable in clockwise or anti-clockwise direction, 0/5/10/15D graduations for beam direction adjustability. Make the light beam at the most reasonable direction toward the illuminated target. 2. 10 degree beam angle adjustable allowed at the the left and right sides after the mounting sleeve-embedded/ fixed into the ground.Ensure the light be installed at most accurate and suitable direction. COB Beam Direction Adjustable Uplight Front cover: Stainless steel SUS316 Housing: 12#Die-casting grey powder coated aluminum. T=60-80μm Adhesion of ISO class 1/ASTM class 4B high temperature painting Driver: Constant current output, Constant current output Glass: Step tempered glass Mounting sleeve: ABS ELECTRONICS Power(Luminaire) 6W-10W Power Factor >0.9 Input Voltage DC12V DC24V DC36V DC48V AC110-130V AC110-240V AC220-240V  50/60Hz Driver Option Integral control gear Dmming Type ON/OFF, 0-10V, DALI, Triac, PWM, DMX512 Driver Integral control gear Optional Eectronic Accessories Plug, Leading Cable, Connection Cable, Junction box Connector 2/3/4/5 Pin

EARTHA D248 SMD Beam Angle Adjustable Inground Light Product Description 15 degree beam direction adjustable in clockwise or anti-clockwise direction, 0/5/10/15D graduations for beam direction adjustability. Make the light beam at the most reasonable direction toward the illuminated target. 10 degree beam direction adjustable allowed at the the left and right sides after the mounting sleeve-embedded/ fixed into the ground.Ensure the light be installed at most accurate and suitable direction. SMD Beam Direction Adjustable Inground Light Front cover: Stainless steel SUS316 Housing: 12#Die-casting grey powder coated aluminum. T=60-80μm Adhesion of ISO class 1/ASTM class 4B high temperature painting Driver: Constant current output, Constant current output Glass: Step tempered glass Mounting sleeve: ABS ELECTRONICS Power(Luminaire) 42W/48W/54W Power Factor >0.9 Input Voltage DC24V DC36V DC48V AC110-130V AC110-240V AC220-240V 50/60Hz Driver Option Integral control gear Dmming Type ON/OFF, 0-10V, DALI, Triac, DMX512 Driver Integral control gear Optional Eectronic Accessories Plug, Leading Cable, Connection Cable, Junction box Connector 2/3/4/5 Pin

CUBIC D88 SMD 1° Supper Narrow Beam Product Description Corrosion-resistant ADC12# die-casting luminium body gives the luminaire good thermal conductivity, and large area connections between the rear of the housing and the led's PCB ensure good heat conduction. Stainless steel screws, high strength 4mm toughened glass ＞92% light transmittance, extremely narrow to wide beam options, rotationally symmetric light. ELECTRONICS Power(Luminaire) 10-12W/15-20W Power Factor >0.9 Input Voltage DC12V DC24V DC36V DC48V AC110-240V 50/60Hz Driver Option Integral control gear Dmming Type ON/OFF, 0-10V, DALI, DMX512 Driver Integral control gear Optional Eectronic Accessories Plug, Leading Cable, Connection Cable, Junction box Connector 2/3/4/5 Pin

PHANTOM Projector Column Projector Light Product Description Projector&Column Projector Light Phantom bollard version of our ground-breaking wall family. Beautiful and contemporary bollard mounted fixtures suitable for any location. ange-extending bollard version of our ground-breaking wall family. Beautiful and contemporary bollard mounted fixtures suitable for any location. Special housing designs and high-quality optical components specifically for demanding visual tasks to provide enhanced visual comfort. Discreet and compact aesthetically designed architectural outdoor spotlight, ideal for glare-free accent lighting, floodlighting and wall washing in the outdoor area.  Luminaire Structure Die-cast aluminium housing Pre-treated before powder coating ensuring high corrosion resistance Single cable entry Integral control gear ELECTRONICS Power(Luminaire) 15W/18W/24W Power Factor >0.9 Input Voltage DC24V DC36V DC48V AC110-240V AC110-130V AC220-240V 50/60Hz Driver Option Integral control gear Dimming Type 0-10V, DALI, Triac, DMX512 Driver Integral control gear Optional Eectronic Accessories Plug, Leading Cable, Connection Cable, Junction box Connector 2/3/4/5 pin

wireless alarm light hospital/station/factory color emergency door lamp l :GP2019LA lamp can receive POCSAG message and give assigned color light with sounds. 2:Sounds can set by switch, 3 levers choice. Sound interval and color combine can set by ID program. 3: Can put batteries in it , can receiving and alarm when power off 4: Easy assemble and fixed 5: Work with 400pcs callbuttons , supper efficiency!

Minimum Order: 1 bags

10 Brightness Eye-Caring & 3 Color Temperature LED Ligh Desk Lamp with Clamp suitable for Reading/Rework/Soldering Table Desk Lamp, Eye protection foldable desk lamp for Home Office and phone repairing.

Minimum Order: 1 bags

The intelligent light pole led display is a new technology that combines an LED display and a street light into one unit. It is designed to enhance public safety and provide useful information to the public. The LED display can be programmed to show weather information, traffic alerts, public announcements, and emergency messages. Moreover, it can also incorporate interactive features such as touch screens or sensors to increase engagement with the audience. The led lamppost lighted display technology is ideal to install in public spaces such as parks, streets, and commercial areas, providing valuable information for pedestrians and drivers alike, while also offering an eco-friendly solution to traditional street lighting. Overall, the LED smart pole light display promises to revolutionize public communication with a reliable and efficient system. Intelligent Light Pole LED Display For Sale LED Intelligent Lamp Post Display Smart Lamp Post screen is a (cluster) audio-visual multimedia terminal that takes the lighting street light pole of the city road as a carrier, accesses the network through 4G and 5G wireless methods, and releases information remotely through the cloud platform. LED Multi-Function Lamp Post Display Smart Lamp Post is an innovative composite application product that integrates various information technologies and devices. What Are the Key Features of a Smart Light Pole LED Display? A smart light pole led lights sensor is a versatile technology that combines traditional street lighting with advanced features. Key features of a smart light pole LED display include a dynamic content display that can be updated in real-time as per user requirements. The display can be customized to show a range of information, including weather updates, public announcements, traffic alerts, and emergency messages. The usage of sensors and cameras makes these displays intelligent by reading data related to traffic, pedestrian occupation, and environmental data. Smart light pole LED displays can also detect sudden motion or sounds, aiding in the prevention of criminal activities. Moreover, these displays can be programmed to adjust light brightness automatically based on the surrounding environment, saving energy. Additionally, they can become interactive by incorporating touchscreen functionalities, enabling more user engagement. The combination of these features ensures public safety, communication, and environmental sustainability. In conclusion, smart light pole LED displays are innovative and efficient led advertising display screen boards that create value while improving public life and urban landscapes. What Are the Benefits of Using Smart Light Pole LED Displays? The benefits of using smart lamp sign pole LED displays are numerous. This technology can reduce energy costs by incorporating energy-efficient LED lighting and light control systems that reduce energy consumption. It offers advanced features such as real-time information display and remote control of lighting systems, increasing the flexibility and functionality of the street infrastructure. Smart light pole LED displays can enhance public safety by illuminating public spaces and providing real-time information to both pedestrians and drivers. It can also incorporate safety features such as surveillance cameras and emergency broadcast systems. It creates new opportunities for interactivity and user engagement due to its features such as touch screens and sensors. The technology enables local authorities to optimize their asset management by analyzing data for better maintenance and operational decision-making. In conclusion, the benefits of smart light pole LED displays extend beyond illumination to provide a comprehensive infrastructure that improves public services, safety, and sustainability. Contact led advertising company Keytechled for more detailed information. There are many led advertising screen manufacturers, but we are one of the best choices for you.

Minimum Order: 1 bags

Led Taxi Top Advertising Display is mainly installed on the taxi, private cars, or buses, working as a terminal display. Small space occupation, good practical performance, group control, program release, accurate media information, fast update, improved advertising efficiency, data analysis, and summary, providing all operation modes, easy, convenient, safe, and effective. Benefits of Digital Car Top Advertising Display Cost-effective Compared to traditional IDC, saving 80% of the cost of investment compared to other service providers, will save 60% of the cost of investment. High stability Independent R&D, high reliability of large amounts of data to ensure multiple backups, second-level recovery, automatic expansion on demand, flexible, convenient and stable applications. Security and reliability The world's largest network attack defense experience, effectively helping customers to reduce security risks, for your operation on the escort. Specialties of Keytechled Taxi Top Advertising Display Empty and load brake indication function. Different colors of marked LED lumination show the current status of the taxi, including empty, carrying passengers, handing over, stopping and etc., which is convenient for passengers to choose from. The intelligent roof light is designed according to the Ministry of Transport's JT/T 905.1.2-2014 technical standard. Its relevant parameters and interfaces all comply with the provisions of the technical standard specification. All products have passed the testing and certification of the provincial electronic quality testing center. Thus, products' safety and quality are guaranteed. As a led advertising company, we provide top of car advertising, auto top advertising, taxi top advertising business plan, advertising on your car roof, roof rack advertising, car roof top advertising, car advertising roof, car roof billboard, etc. For more, contact us.

Minimum Order: 1 bags

An led sphere screen is a display system composed of multiple LED panels arranged in a spherical or semi-spherical shape. These screens are designed to provide a 360-degree viewing experience, making them ideal for immersive visual presentations, entertainment venues, advertising, and events. LED spherical display screen offer a visually striking and immersive platform for communication and entertainment. Their ability to captivate audiences from all angles makes them popular in a wide range of industries, including entertainment, advertising, retail, and corporate events. LED Spherical Screen Advantages Immersive viewing experience sphere led screen provide a 360-degree viewing experience, enveloping the audience in a captivating visual display. This immersive nature of the screen enhances engagement and creates a memorable experience for viewers. Unique and eye-catching design The spherical shape of the screen itself is visually striking and attracts attention. It stands out from traditional flat displays, making it a focal point in various applications such as entertainment venues, events, and exhibitions. Dynamic and versatile content display sphere led display can showcase a wide range of multimedia content, including images, videos, animations, and interactive elements. This versatility allows for creative storytelling and the delivery of impactful messages. Seamless and uniform visuals The seamless integration of LED panels creates a smooth and uniform visual display without visible gaps or discontinuities. This ensures a consistent viewing experience from any angle, enhancing the overall quality of the content. There are many led advertising screen manufacturers, but we are one of the best choices for you.

Minimum Order: 1 bags