Networking Equipment

Two models: POE5912 and POE5912G Compliant with IEEE 802.3af standard Provide three adjustable voltage outputs of 5V/9V/12VDC Maximum transmission distance up to 100 meters 100 Gigabit Ethernet port Plug and play, no management required The POE5912 separator is an economical, practical, high-performance, and highly reliable PoE remote power receiving device based on the IEEE 802.3af standard, which can separate power and data signals transmitted through network cables. When used in conjunction with power supply devices that comply with IEEE 802.3af standards (such as PSE908EX PSE1816G PSE802G), POE5912 can provide both data and power for network devices that do not support PoE. PoE5912 can output 5V/2A; 9V/1.1A; Three voltages of 12V/1A can be used together with power supply equipment to flexibly expand home network and office network without being restricted by power line layout.

Minimum Order: 1 bags

Model: pse803 characteristic: IEEE 802.3af compliant The maximum transmission power is 15.4W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required explain: Pse803 single port 100M Ethernet power supply equipment is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The device can provide a channel of Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera, etc., which comply with ieee802.1 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

PSE802BT single port Gigabit Ethernet power supply equipment is suitable for indoor use. It can work normally at 100vac ~ 240VAC input voltage. The power supply is connected with the network terminal equipment through super class 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can provide Poe power supply application conforming to ieee802.3af/at/bt international standard for one-way Ethernet equipment, such as advertising machine, small base station, switch, wireless AP, industrial network terminal, network camera, etc. Meet the requirements of providing efficient engineering solutions in places where power cannot be provided at the remote end or where Ethernet network cable power supply is used to improve system reliability and simplify equipment installation.. PSE802BT Features • 4-Pair power up to 90W • IEEE 802.3bt compliant - higher power • compatible with all IEEE 802.3at, 802.3af and legacy power supply devices • safety: low power devices only receive the required power, and 2 pairs of PDS receive power through 2 pairs • Ethernet power supply is safe and reliable • automatic detection and protection of non-standard Ethernet terminals • support for 10/100/1000baset applications • compact design for easy installation of WLAN access points

Minimum Order: 1 bags

PSE-156G IEEE 802.3at compliant The maximum transmission power is 60W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required An important feature of pse156g is its ability to provide high power on all four pair Poe power supplies and Ethernet cables. Compared with dual core (two pair) products, pse156g can greatly improve performance and efficiency. The four pair Poe power supply enables the pse156g to maintain a low current level of 600mA while providing 60W power. This is in sharp contrast to similar two- wire devices. When providing 60W power, its current level is as high as 1.2A. In view of this, this more efficient pse156g can provide 51w power for PD loss when using CAT5 cable, while it can only provide 30W for two-wire solution. In addition to its 60W operation mode, pse156g can also be used to supply power to two-wire equipment, with a power of up to 30W. In this case, the midspan device still uses all four pairs of CAT5 and above cables, which can reduce the waste of up to 50% of the power on the cable. Compared with the traditional two core solution, the POE system with pse156g can reduce the energy loss by up to 15%.

Minimum Order: 1 bags

PSE801G Non standard Poe design, 48 ~ 56vdc output The maximum transmission power is 30W The maximum power supply distance is 100m Built in power supply, plug and play, no management required Pse801g single port Gigabit Ethernet power supply equipment. The power supply is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can supply power for one-way Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera and other Poe applications, and meet the requirements of providing efficient engineering services in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment

Minimum Order: 1 bags

PSE802G IEEE 802.3at compliant The maximum transmission power is 25.4w Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required Pse802g single port Gigabit Ethernet power supply equipment, The power supply is suitable for indoor use (please put a waterproof box outdoors. It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can be one-way Ethernet equipment, such as router, switch, wireless AP, network telephone and industrial network terminal , network camera, etc. shall be provided in accordance with IEEE802 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

1200Mbps Dual Band 4G 5G Routers Gigabit Port 5G Router With SIM Card Slot Product Description Hardware: WS1208 uses the latest MTK wireless solution ,the MT7621A , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1×USB 3.0 port, 1×PCI-E ,1×SIM card , Wireless: Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be 1200Mbps , 4×5Dbi high gain antennas , perform better and cover larger. Software: Preload the OpenWRT. Specification Technical Specification SOC MT7621A+MT7612E+MT7603E 880MHz dual-core MIPS1004Kc CPU RAM 128Mx16bit DDRIII SDRAM,16MB SPI Flash Supports up to 256Mx16bit DDRIII, 32MB SPI Flash Wireless Frequency Band Wi-Fi 1: 11b/g/n : 2.412~2.484 GHz Wi-Fi 2: 11a/n/ac : 5.180~5.825 GHz GPS:1565.42~1585.42 MHz Wireless Specification Maximum access rate of 1167Mbps (2.4G 300Mbps + 5G 867Mbps) PCBA size L200mm x W175mm x H17mm Maximum Power Consumption Max. power consumption 24W Physical Interface WAN x 1+LAN x 4 : RJ45 interface ,10/100/1000 Fast Ethernet Power connector: 5.5mm DC socket, DC12V2A power input USB interface: 1 USB3.0 female socket LTE interface: 1 MiNi PCI-E female connector, connects to USB2.0 interface LTE module, 1 drawer SIM card holder Buttons: 1 button to return to factory settings Power Requirements DC12V2A Wireless Settings Working Mode AP/WDS/Repeater Wireless mode 11b/ 11g /11n /11a /11ac Channel selection (Display the number of channels in different areas by country setting) Channel bandwidth (Auto, 20Mhz, 40Mhz, 80Mhz,) Receiving Sensitivity 802.11b -92dBm @ 1Mbps -83dBm @ 11Mbps 802.11ag -91dBm @ 6Mbps -76dBm @ 54Mbps 802.11n HT20 -91dBm @ MCS0 -70dBm @ MCS7 802.11n HT40 -88dBm @ MCS0 -67dBm @ MCS7 802.11ac HT80 -85dBm @ MCS0 -58dBm @ MCS9 Antenna External detachable 5DBi high gain omni-directional antenna Environmental and Physical Parameters Operating Temperature -20°C ~ 55°C Storage temperature -40°C ~ 70°C Humidity 0%~90% Typical, non-condensing Products Pictures 1200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 01200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 11200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 21200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 31200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 4

10GE XGS-PON GPON ONU 1GE 2VOIP ZC-512N Optical Network Terminal Introduction ZC-512N is a XGS-PON Optical Network Terminal(HGU) designed for FTTH scenario. It supports L3 function to help subscriber construct intelligent home network. It provides subscribers rich, colorful, individualized, convenient and comfortable services including voice(VoIP), video (IPTV) and high speed internet access. 10GE XGS PON GPON ONU 1GE 2VOIP 12V DC 1A Optical Network Terminal 0 Specifications GPON interface(NNI):1 x XGS-PON interface Optical port CLass N2 optical system Optical connector SC/APC Receiving Sensitivity -28dBm Overload optical power -8 dBm Transmitting Optical Power 0.5~5dBm Transmit rate 9.953Gbit/s downstream; 9.953Gbps upstream Wavelength Receiving(DOWN):1577nm；Transmitting(UP):1270nm Authentication SN/ Password/LOID /LOID+Password authentication User Network Interface(UNI):1*10GE+1GE+2VoIP(option) Ethernet Port • Ethernet port-based VLAN tags and tag removal • VLAN transparent and aggregation • MAC address learning • Q-in-Q • Auto-adaptive 10 Mbit/s, 100 Mbit/s ,1000 Mbit/s or 10000 Mbit/s POTS Port (option) • SIP/H.248 • Call waiting, Inconditional Call Forward, Call Forward if Busy,Call Forward if no reply and Three-party calls. • G.711A/U, G.729 and G.722 encoding/decoding • SDP protocol (RFC 2327 and RFC 4566) • T.30/T.38/G.711 fax mode • DTMF • Emergency calls (with the SIP/H.248 protocol) Product Function GPON • ITU-T G.9807.1 • ITU-T G.988 • 32 TCONTs /256GEM ports • 8 Egress queues per TCONT at least • VLAN or VLAN plus priority gem mapping mode • Performance monitoring: eth/Gem port • Dying gasp Layer 2 Features • MAC learning (SVL)/aging • Support max frame length to 1518 bytes • VLAN tagging for untagged packets • Support VLAN 1-4094 • VLAN transparent/translation Layer 3 Features • PPPoE/Static IP/DHCP/Bridge • NAT • Port forwarding • ALG, UPnP • DDNS/DNS server/DNS client • IPv6/IPv4 dual stack,and DS-Lite • Static/Default routes • Multiple services on one WAN port • RIPv2 with passive mode Multicast • IGMP v2 (RFC 2236) and IGMP v3 (RFC 3376) • IGMP snooping and IGMP Proxy • MLD v1/v2 Qos • Support 8 Queues with Strict Priority • Ethernet port rate limitation • SP/WRR/SP+WRR • Service flow classification Management • OMCI/TR069 • Web UI(Http by LAN and WAN) • Telnet(Telnet by LAN and WAN) • SSH management with CLI commands • Dual-system software backup and rollback Physical Performance Dimensions ( W x Dx H) 17.2CM*11.5CM*4CM Weight About 400g Working temperature 0°C ~ 45°C Working humidity 5% RH to 95% RH (non-condensing) Power adapter input 100–240 V AC, 50 / 60 Hz System power supply 12V DC, 1 A Power consumption <10W

GP-AG500 wireless access product is a wireless access device based on IEEE 802.11ac technology independently developed by Guangpu technology. The utility model has the advantages of rich functions, high performance and high reliability, to meet the needs of WLAN wireless applications in industrial scenarios. GP-AG500 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. It can work simultaneously in 2.4GHz and 5GHz frequency band when working in AP mode, and supports IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n and 802.11ac five modes, with the highest access rate of 733Mbps. ·Supports 802.11b/g/n and 802.11a/n/ac standards ·Client-based millisecond-level fast roaming ·Diversified access authentication methods ·MAC address cloning ·lntegrated antenna and power supply ·Isolation and protection design

Minimum Order: 1 bags

GP-R650 series industrial grade 5g router is a new generation of wireless router independently developed by our company. It integrates 5g / 4G / 3G, 2.4G and 5.8G WiFi, routing, switching, network management, VPN, firewall, security and other technologies, and provides static routing / dynamic routing, 5g / 4G / 3G dialing, QoS, industrial serial communication and other software features New high cost performance, full function edge network terminal equipment. ·High performance industrial 5g module is adopted ·High performance industrial dual core processor is adopted ·Cold rolled steel shell with sheet metal has good heat dissipation. ·Power supply: from + 7.5V to + 32V DC ·Protection grade: IP40 (can handle to ip51) ·Support port traffic detection ·Support link real-time monitoring ·Support multiple VPN protocols (PPTP, L2TP, IPSec, VPN) ·Support serial port simple DTU function

Minimum Order: 1 bags

GP-AP1200 is a high-performance, high bandwidth, multi-function, outdoor industrial dual band wireless access point that supports both 802.11b/g/n and 802.11a/n/ac standards. The equipment is based on 802.11n MIMO (multiple input multiple output) technology and adopts 2T2R architecture. The maximum bandwidth of dual frequency concurrent operation can reach 1167 Mbps, which can be widely used in medical treatment, underground pipe gallery, etc School, park, scenic spot, playground and other outdoor and outdoor wireless network coverage, fully compatible with 802.11 a / B / g / N / AC protocol client equipment access. ·Supports 802.11b/g/n and 802.11a/n/ac ·Standard fat and thin integrated mode ·Diversified access authentication methods ·IP67 protection level

Minimum Order: 1 bags

GP-XD2200 is a high-performance, high bandwidth, multi-function, carrier class indoor dual band wireless Access Point, which supports 802.11a/b/g/n/ac triple frequency 2400-2483.5mhz/5150-5825mhz working mode. It adopts 1000m network port design and 4dB omni-directional internal antenna indoor coverage. Support 20MHz / 40MHz / 80MHz bandwidth selection, thin and fat switching, cloud platform management; support access signal threshold limit, multi virtual SSID, maximum number of clients and other functions. ·Supports 802.11b/g/n and 802.11a/n/ac standards ·3 * 3mu-mimo wave2.0 architecture ·Integration mode of fat and thin ·Diversified access authentication methods ·Fireproof and flame retardant design of shell ·Wireless access 256+

Minimum Order: 1 bags

GP-XD1200 adopts the latest high pass customized chip optimization algorithm, which has strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the integrated mode of fat and thin, graphical fast configuration mode, typical functions: access signal threshold limit, multi virtual SSID, maximum client number limit, VLAN, QoS speed limit rules, WDS, national and regional settings, advanced RF mode, etc. ·Supports 802.11b/g/n and 802.11a/n/ac standards ·Integration mode of fat and thin ·Diversified access authentication methods ·Adopt flame retardant material body design ·Wireless access 128+

Minimum Order: 1 bags

The GP-AG1000 wireless access point product is a wireless access device based on IEEE 802.11ac technology independently developed by GPSENKE technology. The utility model has the advantages of rich functions, high performance and high reliability, which can meet the requirements of WLAN wireless application in industrial scenes. The GP-AG1000 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. Operating in AP mode, it can operate in the 2.4GHz and 5GHz bands simultaneously. Supports four modes: IEEE 802.11a, IEEE802.11 b, IE 802.21g, IEE 8021n and 802.8ac. The highest access rate is 1167 Mbps. ·Full support for 802.11ac technology ·Millisecond Seamless Roaming ·MAC address cloning ·Dual Port Design ·IPv4 / IPv6 dual stack ·Wireless channel multi-terminal simultaneous communication ·Hardware encryption and decryption ·Robust design for harsh environments ·Working frequency band: 2.4GHz 5GHz ·Spatial flow number 2 2 ·Bundling: Support 40Mhz,not recommended 80MHz bundling ·MU-MIMO NA Support ·867Mbps (PHY) NA NA ·400Mbps (PHY) Support Support ·A-MPDU Support Support

Minimum Order: 1 bags