Networking Equipment

Optech’s 100G QSFP28 Direct Attach Cables (DAC) portfolio offers a wide range of passive and active copper cables with different diameters, lengths. It is the perfect solution to linked switches, servers and storage inside racks. 100G QSFP28 Direct Attach Cables are available with 30 AWG, 28 AWG, 26 AWG and 24 AWG cables . Standard lengths are 0.5m, 1m, 2m, 3m, 5m, and 7m. 100G QSFP28 to 4x25G SFP28 Breakout Direct Attach Cables are also available with lengths from 1 meter to 4 meter. Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0C to 70C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel

Minimum Order: 50

Optech’s 100G QSFP28 Direct Attach Cables (DAC) portfolio offers a wide range of passive and active copper cables with different diameters, lengths. It is the perfect solution to linked switches, servers and storage inside racks. 100G QSFP28 Direct Attach Cables are available with 30 AWG, 28 AWG, 26 AWG and 24 AWG cables . Standard lengths are 0.5m, 1m, 2m, 3m, 5m, and 7m. 100G QSFP28 to 4x25G SFP28 Breakout Direct Attach Cables are also available with lengths from 1 meter to 4 meter. Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70℃ - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR

Minimum Order: 50

Optech’s 25G SFP28 Direct Attach Cables (DAC) portfolio offers a wide range of passive and active copper cables with different diameters, lengths. It is the perfect solution to linked switches, servers and storage inside racks. 25G SFP28 Direct Attach Cables are available with 30 AWG, 28 AWG, 26 AWG and 24 AWG cables . Standard lengths are 0.5m, 1m, 2m, 3m, 5m, and 7m. Features - Compliant with SFF-8402 and SFF-8432. - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Lowest total system EMI solution - Optimized design for signal integrity - Operating temperature: -5~70℃ - RoHS compliant Applications - 25G Ethernet

Minimum Order: 50

Optech’s 10G SFP+ and 40G QSFP+ Direct Attach Cables (DAC) portfolio offers a wide range of passive and active copper cables with different diameters, lengths. It is the perfect solution to linked switches, servers and storage inside racks. 10G SFP+ Direct Attach Cables are available with 30 AWG, 28 AWG, 26 AWG and 24 AWG cables . Standard lengths are 0.5m, 1m, 2m, 3m, 5m, and 7m. Features - Compliant with SFP+ MSA - Compliant with SFP MSA (INF-8074i) - Support for multi-gigabit data rates up to 10.5Gbps - Support for 1x, 2x, 4x and 8x Fiber Channel data rates - Hot Pluggable SFP 20PIN footprint - Serial ID module on MOD(0-2) - AC coupling of PECL signals - EMI/EMC performance - Low Power consumption<0.5W - RoHS Compliant Applications - Storage Area Networks( SAN), Network Attached - Storage and Storage Servers - 1G/2G/4G/8G Fiber Channel - Switched fabric I/O such as ultra high bandwidth switches and routers - Data center cabling infrastructure - High density connections among network equipments

Minimum Order: 50

The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optech’s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G. Features - QSFP28 MSA compliant - Compliant to IEEE 802.3bm 100GBASE-SR4 - Four independent full-duplex channels - Supports 103.1Gb/s aggregate bit rate - Up to 100m OM4 MMF transmission - Operating case temperature: 0 to 70℃ - Single 3.3V power supply - 4x25G electrical interface (OIF CEI-28G-VSR) - Maximum power consumption 2.5W - MTP/MPO optical connector - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 100G Ethernet

Minimum Order: 50

Optech’s 40G QSFP+ transceivers series includes the 40G QSFP+ SR4, 40G QSFP+ LR4, 40G QSFP+ PSM4, 40G QSFP+ ER4 and the latest innovation the 40G QSFP+ Bidi. It offers connecting solutions from 100m to 40km for data centers and high performance computing networks. Our 40G QSFP+ transceivers support link lengths up to 300m over multimode fiber cables with MTP/MPO connectors. The 40G QSFP+ transceivers support link lengths up to 10km over single mode fiber with MPO connectors (PSM4) and up to 40km over single mode with duplex LC connectors. Features - Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard - QSFP+ MSA compliant - Compliant with QDR/DDR Infiniband data rates - Up to 11.2Gb/s data rate per wavelength - 4 CWDM lanes MUX/DEMUX design - Up to 10km transmission on single mode fiber (SMF) - Operating case temperature: 0 to 70°C - Maximum power consumption 3.5W - LC duplex connector - RoHS compliant Applications - 40GBASE-LR4 Ethernet Links - Infiniband QDR and DDR interconnects - Client-side 40G Telecom connections

Minimum Order: 50

Optech’s 40G QSFP+ transceivers series includes the 40G QSFP+ SR4, 40G QSFP+ LR4, 40G QSFP+ PSM4, 40G QSFP+ ER4 and the latest innovation the 40G QSFP+ Bidi. It offers connecting solutions from 100m to 40km for data centers and high performance computing networks. Our 40G QSFP+ transceivers support link lengths up to 300m over multimode fiber cables with MTP/MPO connectors. The 40G QSFP+ transceivers support link lengths up to 10km over single mode fiber with MPO connectors (PSM4) and up to 40km over single mode with duplex LC connectors. Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet

Minimum Order: 50

Optech’s 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-LW/LR - 1310nm DFB transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes

Minimum Order: 50

Optech’s 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-SW/SR - 850nm VCSEL transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes - Inter Rack Connection

Minimum Order: 50

Optech’s 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0°C to 70°C Applications - 10 Gigabit Ethernet

Minimum Order: 50

Optech’s 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * Parallel 4 Optical Lanes * 100G Lambda MSA 400G-FR Specification compliant * Up to 2km transmission on single mode fiber (SMF) with FEC * Operating case temperature: 0 to 70°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 106.25Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-12 connector * RoHS compliant Applications * 400G Ethernet * Infiniband interconnects * Datacenter Enterprise networking

Minimum Order: 50

Optech’s 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * Parallel 4 Optical Lanes * IEEE 802.3bs 400GBASE-DR4 Specification compliant * Up to 500m transmission on single mode fiber (SMF) with FEC * Operating case temperature: 0 to 70ºC * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 106.25Gbps (PAM4) per channel * Maximum power consumption 12W * MPO-12 connector * RoHS compliant Applications * 400G Ethernet * Infiniband interconnects * Datacenter Enterprise networking

Minimum Order: 50

Optech’s 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 4 CWDM lanes MUX/DEMUX design * 100G Lambda MSA 400G-FR4 Specification compliant * Up to 2km transmission on single mode fiber (SMF) with FEC * Operating case temperature: 0 to 70°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 106.25Gbps (PAM4) per channel. * Maximum power consumption 12W * Duplex LC connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking

Minimum Order: 50

Optech’s 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 4 CWDM lanes MUX/DEMUX design * 100G Lambda MSA 400G-LR4 Specification compliant * Up to 10km transmission on single mode fiber (SMF) with FEC * Operating case temperature: 0 to 70oC * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 106.25Gbps (PAM4) per channel. * Maximum power consumption 12W * Duplex LC connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking

Minimum Order: 50