Mining, Metal, Plastic & Glass Machinery

Locomotora eléctrica de 3 toneladas para mina de metal Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Shenzhen Yunchuangda Industrial Equipment Co., Ltd., established in 2006, operates a 3,500 square meter facility in Shenzhen. We are a modern enterprise specializing in the design, development, manufacturing, and installation of surface treatment equipment. Our comprehensive product line includes anodizing equipment, hard anodizing equipment, aluminum coil anodizing equipment, micro- arc oxidation equipment, electrolytic polishing lines, pickling and passivation lines, precision cleaning lines, and various custom surface treatment production lines.Our products are widely used in industries such as semiconductors, aerospace, automotive manufacturing, precision hardware, and electronics.

Minimum Order: 1 bags

Fixed Rockbreaker Boom Why buy the Fixed Rockbreaker Boom from Shandong YuanZhenghang Machinery Equipment Co., LTD.? 1.More than 20 years of professional production experience. 2. Fast and efficient after-sales service. 3. Rich field work experience. 4. Professional and creative R&D team. 5. Low prices in China. 6. China's fast delivery capability. 7. World-class quality. 8. Global services. 9. Customized services.

Minimum Order: 1 bags

Introduction of crude oil distillation plant: Crude oil distillation plant can refine a variety of waste crude oil such as waste tire/plastic oil into diesel and gasoline through vacuum distillation process. Distillation is a chemical process and facility used in oil refineries to distill and refine the crude oil, pyrolysis oil and other kinds of waste oil into new energy such as diesel , gasoline , fuel oil, base oil etc.  The basic principle of oil refining is simple: crude oil is heated so that different fractions can be separated from it by means of distillation. This separation process results in gasoline, aviation fuel, and diesel, as well as heavier fractions, such as heating oil, bunker fuel, and bitumen. Crude oil fractions can also be turned into base oil, which is used to manufacture lubricating oils. Nothing goes to waste – Oil refining uses its resources very wisely Raw material which can be used a. Waste oil .example: waste diesel, waste oil residue etc. b. tire/rubber oil c. plastic oil d. crude oil e. waste engine oil f. waste motor oil g. waste lube oil h. waste transformer oil i. underground oil

Introduction of used engine oil distillation plant: Vacuum Pressure Distillation，is the new technology which can refine waste engine oil into diesel or base oil. The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type” vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually. Waste engien Oil Distillation Process ● The oil pump pumps the waste engine oil into the distillation reactor by oil pump. ● The reactor will be heated by fuel oil, LPG, natural gas, wood or coal, etc and when the temperature reaches to a certain degree, the oil will be boiling and oil steam will be produced. ● The oil steam will be generated and be purified in the distillation tower. ● Purified oil steam will flow to the condensers and get liquefied through them and stored in the product oil tanks.

Working process of waste tire pyrolysis plant: 1. FEEDING (2 HOURS) : Load tires/rubbers into the reactor by automatic hydraulic feeder, after loading all, seal the feeding door.  2. HEATING ( 8~10 HOURS): Start the Waste Rubber Pyrolysis Plant and the reactor will be rotating and heated by fuel. When the temperature reaches the degree of 250 to 280, the oil steam will be continuous produced until the temperature reaches 350-480 C. Oil steam will flow through oil gas separator, light component will enter the condensers and liquified as fuel oil, meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as fuel oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material. 4. COOLING(4~5HOURS): After the oil producing  process is completed, leave the plant for cooling and waiting for discharge. 5. DISCHARGING(2 HOURS):  Discharge the carbon black automatically and pull out the steel wire finally. Features of Pyrolysis Process Safety: 1. Anti-explosion control: During the pyrolysis process, combustible gas will be generated as fuel gas  for pyrolysis system heating usage. The combustible gas will be filtered through the anti-flashback water seal to  prevent combustible gas from flashing back  to the oil tank and then enter the furnace to be recycled , causing combustion or explosion. 2. Emission Control: 2-phase scrubbers and activated carbon filters to prevent pyrolysis process from releasing  pollutants.  3. PLC control : All motors and gauges of  the equipment are connected to PLC, which can realize mechanical and electronic control. The control cabinet is equipped with an alarm system. When the temperature, pressure, or mechanical abnormalities occur during the operation of the equipment, the control cabinet will automatically alarm.

Oil sludge is a complex physico-chemical mixture, consisting of three distinct fractions: water, oil and solid (metals, salts, sand, etc.). As most promising of the presented methods of utilization of oil sludge is pyrolysis, it can refine oil sludge by thermal cracking process which compared with the other methods have a number of significant advantages. Oil sludge (OS) is a common waste in oil field mining, oil transportation, fining, storage and other oil related process which consisting of three distinct fractions: water, oil and solid (metals, salts, sand, etc.).  OS can cause great damage to the environment and threaten human's health if not treated properly. During the drilling process, the oil-containing silt，which brought from replacing the well-drilling and extracting the drive pipe, will be left around the well site. The oil-containing silt that is covered with various sands and sundries, etc., will be piled up more and more before the site is cleaned up or the oily sludge is temporarily piled up for a period of time. The oily sludge comes from the deep drilling strata, and contains a large number of benzene series, phenols, anthracene, pyrene and other odorous toxic substances. It will not only damage the soil or pollute the environment, but also cause the waste of resources if not treated well. Features of Pyrolysis Process Safety: 1. Anti-explosion control: During the pyrolysis process, combustible gas will be generated as fuel gas  for pyrolysis system heating usage. The combustible gas will be filtered through the anti-flashback water seal to  prevent combustible gas from flashing back  to the oil tank and then enter the furnace to be recycled , causing combustion or explosion. 2. Emission Control: 2-phase scrubbers and activated carbon filters to prevent pyrolysis process from releasing  pollutants.  3. PLC control : All motors and gauges of  the Oil Sludge Treatment Pyrolysis Plant are connected to PLC, which can realize mechanical and electronic control. The control cabinet is equipped with an alarm system. When the temperature, pressure, or mechanical abnormalities occur during the operation of the equipment, the control cabinet will automatically alarm. https://www.sihaienergytech.com/

Pyrolysis is one of the most promising chemical recycling technologies for plastic recycling , which has the capability to handle also more challenging waste plastic streams. In pyrolysis, the degradation of organic materials takes place under the effect of heat and in the absence of oxygen. Recycling Of Various Waste Plastics: With the development of global industry, the amount of plastic waste in the world has reached a level that threatens the ecology. Landfills are piled up like mountains, and marine plastic waste destroys the ecology. In order to deal with these difficult-to-decompose wastes, plastic pyrolysis oil plants have become an efficient solution, which not only solves the pollution problem, but also turns waste plastics into fuel energy. Features of Pyrolysis Process Safety: 1. Anti-explosion control: During the pyrolysis process, combustible gas will be generated as fuel gas  for pyrolysis system heating usage. The combustible gas will be filtered through the anti-flashback water seal to  prevent combustible gas from flashing back  to the oil tank and then enter the furnace to be recycled , causing combustion or explosion. 2. Emission Control:  The exhaust gas generated during heating the reactor will be purified and cooled down in 2 scrubbers(1 water pond type scrubber and 1 water spray, ceramic ring adsorption and activated carbon absorption type scrubber ). Finally, it will be discharged environmental friendly. 3. PLC control : All motors and gauges of  the equipment are connected to PLC, which can realize mechanical and electronic control. The control cabinet is equipped with an alarm system. When the temperature, pressure, or mechanical abnormalities occur during the operation of the equipment, the control cabinet will automatically alarm.

We are now having more than 700 staff and covers an area of 190,000 square meters. Main Product: 1-28" DTH Hammer 25-1250mm DTH Drill Bit Top Hammer Drill Bit/Retrac Bit Hole Opener Bit Eccentric/Symmetric Overburden Drilling System Drill Pipe,Drill Rod Low Air Pressure Drill Hammer & Bit Reverse Circulation Hammer & Bit Our advantages: We have advanced production equipments & talented researchers & technicians & rich experiences in R & D and production. We use the best quality raw materials. We adopt advanced production technology & strict testing procedure. We passed ISO9001 quality management system certification. We accept OEM manufacturing and produce on your design.

Minimum Order: 1 bags

We are now having more than 700 staff and covers an area of 190,000 square meters. Main Product: 1-28" DTH Hammer 25-1250mm DTH Drill Bit Top Hammer Drill Bit/Retrac Bit Hole Opener Bit Eccentric/Symmetric Overburden Drilling System Drill Pipe,Drill Rod Low Air Pressure Drill Hammer & Bit Reverse Circulation Hammer & Bit Our advantages: We have advanced production equipments & talented researchers & technicians & rich experiences in R & D and production. We use the best quality raw materials. We adopt advanced production technology & strict testing procedure. We passed ISO9001 quality management system certification. We accept OEM manufacturing and produce on your design.

Minimum Order: 1 bags

We are now having more than 700 staff and covers an area of 190,000 square meters. Main Product: 1-28" DTH Hammer 25-1250mm DTH Drill Bit Top Hammer Drill Bit/Retrac Bit Hole Opener Bit Eccentric/Symmetric Overburden Drilling System Drill Pipe,Drill Rod Low Air Pressure Drill Hammer & Bit Reverse Circulation Hammer & Bit Our advantages: We have advanced production equipments & talented researchers & technicians & rich experiences in R & D and production. We use the best quality raw materials. We adopt advanced production technology & strict testing procedure. We passed ISO9001 quality management system certification. We accept OEM manufacturing and produce on your design.

Minimum Order: 1 bags

We are now having more than 700 staff and covers an area of 190,000 square meters. Main Product: 1-28" DTH Hammer 25-1250mm DTH Drill Bit Top Hammer Drill Bit/Retrac Bit Hole Opener Bit Eccentric/Symmetric Overburden Drilling System Drill Pipe,Drill Rod Low Air Pressure Drill Hammer & Bit Reverse Circulation Hammer & Bit Main Product: 1-28" DTH Hammer 25-1250mm DTH Drill Bit Top Hammer Drill Bit/Retrac Bit Hole Opener Bit Eccentric/Symmetric Overburden Drilling System Drill Pipe,Drill Rod Low Air Pressure Drill Hammer & Bit Reverse Circulation Hammer & Bit

Minimum Order: 1 bags

Main Products: 1-28" DTH Hammer 25-1250mm DTH Drill Bit Top Hammer Drill Bit/Retrac Bit Hole Opener Bit Eccentric/Symmetric Overburden Drilling System Drill Pipe,Drill Rod Low Air Pressure Drill Hammer & Bit Reverse Circulation Hammer & Bit

Minimum Order: 1 bags

Locomotora minera con acumulador de batería de 8 toneladas Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 8 ton Track gauge (mm) : 500.600.762.900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical or air brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags