Machinery & Parts

Q32 series crawler type shot blastng machine: This machine can be used to derust and streng then the surface of workpieces with mass productions.The workpieces must accept collision.This series machines can be singlely used or together with others. This machine is in keeping with many species,big medium the batch quantity produces the durface of the workpiece in addition to becoming rusty or throwing the pill to enhance.Tidy up the workpiece and the hot processing pieces that musts be the not afraid collisiom.That machine since can single machine usage,can go together with the line usage again.

Minimum Order: 1 bags

Shot blasting machine for procedding road surface: the pill material stored in the lower part of the separation tank by the feed tube into the shot blasting parts,shot blast wheel at high speed rolation by blasting machine motor,the pill is accelarate to 80m/s clean the furface,high- speed energy pills material impact worksurface.under negative pressure pills materials and dust back to the dust separation box,where they completed the separation of pill material and dust and impurities are filtered slip to closed set dust box waiting to be processed. purpose introduction: 1.airport runway plastic remove 2.steel structure surface treatment and rust remove 3.bridge nursing 4.floor engineering base surface treatment 5.the highway project conservation 6.municipal road works in conservation 7.the hull surface maintenance rust removing 8.zebra stripe cleaning 9.storage tanks conservation remove rust and paint 10.conservation of other surface treatments

Minimum Order: 1 bags

Product description: A thermal lance is a tool used for cutting that utilizes very high heat in the presence of pressurized oxygen, reaching over 5,000°F (3,000°C) . Due to the physical length of the thermal lance, the operator is able to make the cut without having to be directly next to the operation.  Using specialized booths, operators are able to deskull the bottom of the steel furnace pots. A skull layer accumulates over time and turns into a mixture of slag and iron. Thermal lances are used to cut out the skulls for maintenance and cleaning. The skull layer cutting operation has to be conducted inside of a booth since the operation produces a dense orange cloud. Considering the size of steel furnaces, slag pots can weigh over 30 tons, meaning using a normal booth enclosure is difficult and time consuming. AAF provided a solution and designed a new booth on rails, enabling the end user the ability to clean the slag pots easier and more effectively. Applications: Used for tap hole opening and ladle cleaning, scrap and slag cutting. Opening iron notch of furnace. Removing metal and sIag stuck to mixer car, cleaning IadIe sliding nozzle and tundish nozzle in continuous casting equipment. Cutting blast furnace tuyere and cooling box, removing pig iron and steel containing sIag. Removing cracked portion from ingot case and sIag plan, cutting and drilling firebricks. Supply range: 1. Outer Diameter: From 9.5mm - 26.7mm for your choice 2. Length: From 1 meters to 5 meters (customized) 3. Coating: 0.8mm -3mm  (customized) Contact :cici[@]jsxrgy.com Website :https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description Thermic lance pipe contains steel wire that promotes combustion. It is used for cutting and boring large iron castings. stainless steels. brass. non-ferrous metal. concrete. ceramic. natural stone. etc. at a temperature of more than 3000°C. without noise and vibration. The tubing filled with steel wires generates powerful flame when burning, and helps materials cut and drilled quickly, and as a result, increases productivity and efficiency. Applications Used for tap hole opening and ladle cleaning, scrap and slag cutting. Opening iron notch of furnace. Removing metal and sIag stuck to mixer car, cleaning IadIe sliding nozzle and tundish nozzle in continuous casting equipment. Cutting blast furnace tuyere and cooling box, removing pig iron and steel containing sIag. Removing cracked portion from ingot case and sIag plan, cutting and drilling firebricks. Supply range 1. Outer Diameter: From 9.5mm - 26.7mm for your choice 2. Length: From 1 meters to 5 meters (customized) 3. Coating: 0.8mm -3mm  (customized) Contact :cici[@]jsxrgy.com Website :  https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description: Thermic Lances come in 9.5mm, 16mm and 26.7mm diameter semi-bright mild steel tube packed with mixed metal wires where pure oxygen is passed through the pipe, while the end of the pipe is ignited with a high temperature source like an oxy-acetylene torch. They are capable of cutting through ferrous and non- ferrous metals, refractory materials and concrete or rock structures. A variety of applications include: Cutting large metal castings or frozen metal spills. Cutting mixed or laminated materials. Removing plugs, seized pins and hard-facing material from Earthmoving Equipment. Concrete cancer repair. Aiding in rescues during collapsed buildings or train derailments. Removal of old refractory material & cleaning/de-slagging of furnaces. Cutting large objects for scrap in demolition and renovation. The iron in the steel burns in the oxygen coming down the pipe to produce enormous heat, with temperatures at the centre of the combustion zone reaching around 4,000 degrees Celsius, greater than the melting point of any known substance. Supply range: 1. Outer Diameter: From 9.5mm - 26.7mm for your choice 2. Length: From 1 meters to 5 meters (customized) 3. Coating: 0.8mm -3mm  (customized) Contact :cici[@]jsxrgy.com Website :  https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description The Thermic Lance is a consumable burning bar for cutting and boring stubborn materials. Once ignited the thermic lance will melt almost any material by thermo-chemical reaction. Due to its simplicity in use and basic equipment requirements it makes the Thermic Lance a very versatile and cost effective tool. Its main uses today are for severing reinforced concrete, salvage, demolition, repair and maintenance in foundries and smelters: The Thermic Lance is a versatile tool for cutting and piercing stubborn materials and has many diverse applications:- Within ferrous and non-ferrous foundries, smelters and mills they are ideal for: Opening tap holes Removing aluminium hard sports Ingot case cutting Ladle and tundish nozzle cleaning Slag and refractory material cutting Burning/Flushing solidified steel plugs in bores Clearing solidified spillages Supply range 1. Outer Diameter: From 9.5mm - 26.7mm for your choice 2. Length: From 1 meters to 5 meters (customized) 3. Coating: 0.8mm -3mm  (customized) Contact : cici[@]jsxrgy.com Website :  https://www.metallurgicalchina.com

Minimum Order: 1000

Product description A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts iron in the presence of pressurized oxygen to create the very high temperatures required for cutting. It consists of a long iron tube packed with iron rods, sometimes mixed with aluminium or magnesium rods to increase the heat output. One end of the tube is placed in a holder and oxygen is fed through the tube. The far end of the tube is pre-heated and lit by an oxyacetylene torch. An intense stream of molten iron is produced at the workpiece end and can be used to cut rapidly through thick materials including steel and concrete. The tube is consumed, so every few minutes the operator shuts off the oxygen, discards the remaining stub of a lance tube and starts using a new one. Although often used as a heavy duty demolition tool, the thermic lance can also be used to remove seized axles of heavy machinery without damaging the bearings or axle housing. This technique is most often used on the pins and axles of large equipment such as cranes, ships, bridges and sluice-gates. The temperature at which a thermal lance operates varies depending on the environment. Supply range 1. Outer Diameter: From 9.5mm - 26.7mm for your choice 2. Length: From 1 meters to 5 meters (customized) 3. Coating: 0.8mm -3mm (customized) Contact ：cici[@]jsxrgy.com Website : https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description Oxygen Lance is a Hollow electric welded tube used in various sizes from 1/8" to 2" inside diameter. Oxygen Lance Pipe comes in a variety of end finishes. End caps are provided to prevent contamination. Generally large furnaces are non Tilting in Type and use bottom pouring method to take out the Molten Metal through the Tap Hole. When the Tap hole needs to be opened the same is done with the help of a High Frequency Induction Welded Low Carbon Mild Steel Tube which can sustain 750 PSI Pressure without leaking of Suitable Size 8mm NB,15mm NB or even 25mm NB in certain Cases. Oxygen at high pressure is injected through these tubes into the Tap Hole and the molten metal starts flowing. Depending on the type of Ferro alloy or Steel Plant or Copper or Zinc Smelter the Consumption of the Pipe is determined. These lancing pipes are basically used to open the Tap holes of Bottom Pouring Furnaces. Our oxygen lancing pipes with long service life are developed from hot rolled carbon steel. Prior to dispatch of the range to our clients, these are passed through various tests including dimensional checking, hydro testing (pressure test), flattening test and drift test. Global standard lancing pipes are widely accepted for blowing oxygen in electric arc furnace. Supply range: 1. Outer Diameter: From 6mm -60mm for your choice 2. Length: From 1 meter to 9 meters (customized) 3. Coating: 0.8mm -3mm (customized) Contact: cici[@]jsxrgy.com Website: https://www.metallurgicalchina.com

Minimum Order: 1000

Oxygen Lance Pipe 1. Plain oxygen lance pipe 2. Ceramic coated oxygen lance pipe 3. Calorized oxygen lance pipe 4. Ceramic coated and calorized oxygen lance pipe Welded tube and seamless tube is available. We supply all the types of oxygen lance pipes according to your requirement. Oxygen Lance is a hollow electric welded tube used in various sizes from 1/8 INCHES to 2 INCHES inside diameter. Oxygen Lance Pipe comes in a variety of end finishes. End caps are provided to prevent contamination. Oxygen Lancing is a reliable method for tapping heats or for other production operations. Oxygen Lance Pipe is used to remove the carbon from molten metal. During the steelmaking process, a desired carbon content is attained by injecting oxygen into the molten metal. This process is used in blast furnaces, basic oxygen furnaces and also induction and electric furnaces Lances are used for opening furnace tap holes, cleaning ladle well blocks, unclogging tundish nozzles, cutting ferrous materials, providing the steel or iron is hot enough to sustain burning, ie cutting skulls, spill clean-up, etc. Supply range 1. Outer Diameter: From 6mm -60mm for your choice 2. Length: From 1 meter to 9 meters (customized) 3. Coating: 0.8mm -3mm (customized) Contact: cici[@]jsxrgy.com Website: https://www.metallurgicalchina.com

Minimum Order: 1000

Oxygen Lancing Pipes New Hindustan Tubes is an Industry leader in the manufacturing of Oxygen Lancing Pipes in India. We manufacture oxygen lancing pipes of different size and shape based on the customer's requirements. We stand among the leading manufacturers and suppliers of oxygen lancing pipes in India. Oxygen Lancing Pipes For Ferro Alloy Plants. Applications Burning Lances can be employed to cut all types of steels, metals i.e. copper, steel, cast steel, cast iron, skull, heavy melting scrap and for Ferro Alloys Plants, Burning & Jammed taphole opening, cleaning of spills from continuous caster and Blast furnaces and any burning operation for industries. Supply range 1. Outer Diameter: From 6mm -60mm for your choice 2. Length: From 1 meter to 9 meters (customized) 3. Coating: 0.8mm -3mm (customized) Contact: cici[@]jsxrgy.com Website: https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description Oxygen lance tube has a number of uses including: 1.Oxygen lance tube for decarburising: Carbon and other chemical constituents impart certain attributes or properties to a metal and these elements must therefore be carefully measured and controlled during the smelting process. Employed in blast furnaces, basic oxygen furnaces as well as induction and electric arc furnaces, oxygen lance tube is used for decarburising i.e. a process of pumping an oxygen rich mixture at high pressure through oxygen lance tube into the melt. The oxidising effect burns off the excess carbon in the molten metal thus reducing the percentage of carbon to an acceptable level. 2.Oxygen lancing tubes are used for opening furnace tap holes i.e. tapping a furnace. When the desired steel composition and temperature has been reached, the furnace tap hole is opened through a combination of drilling and tapping using oxygen lances. Lances are coupled to a high pressure oxygen supply, the end of the lance is ignited and through careful and skillful manipulation, the tap hole clay which can be up to 800mm thick is effectively burnt away, facilitating the pouring of the molten metal for further processing. 3.Oxygen lance tube for cleaning ladle well blocks Ladle well blocks require cleaning once the casting process has been completed. Ladles are tipped to remove the slag. Oxygen lances are employed to clean both the upper and lower nozzles and if necessary, the bottom of the ladle is also cleaned with a lance tube if it contains impacted debris. 4.Oxygen lance tubes are used for unclogging tundish nozzles Tundishes are receptacles used to temporarily store a batch (melt) of molten metal while it is moved through the production process. Unclogging nozzles with oxygen lance tube is a more cost effective option than replacing entire nozzle systems. 5.Oxygen lance tubes are used for cutting skulls Oxygen lances are used effectively to cut and clean skulls which are layers of slag and process metals that have solidified or frozen against the refractory material forming a layer of insulation which reduces heat losses and protects the furnace lining from erosion, chemical attacks and thermal shock. 6.Oxygen lance tubes are used for cleaning up spillages Oxygen lances are used to cut up solidified molten metal spillages into smaller pieces facilitating handling and thus aiding the re-smelting or disposal of the sometimes valuable spilt material. Supply range: 1. Outer Diameter: From 6mm -60mm for your choice 2. Length: From 1 meter to 9 meters (customized) 3. Coating: 0.8mm -3mm (customized) Contact: cici[@]jsxrgy.com Website: https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description Oxygen lance pipe for cleaning ladle well block: After the casting process is complete, ladle blocks need to be cleaned.Ladle tilt to remove slag.The oxygen lance is used to clean the upper and lower nozzles and, if necessary, the bottom of the ladle can also be cleaned with the nozzle if it contains debris. Oxygen lance pipe is used to dredge tundish nozzle: Tundishes are containers used to temporarily store (melt) a batch of molten metal while it is moved during production.Using oxygen nozzle tubes to plug the nozzle is a more cost-effective option than replacing the entire nozzle system. The oxygen lance is used to cut the skull The oxygen lance effectively cuts and cleans the skull, which is a slag layer, and the processed metal has solidified or frozen in the refractory material to form an insulating layer, thereby reducing heat loss and protecting the lining from corrosion, chemical attack and thermal shock. The oxygen nozzle is used to clean up spills Oxygen spray guns are used to cut solidified molten metal leaks into smaller pieces for disposal, thus helping to remelt or dispose of sometimes valuable leaks. Supply range 1. Outer Diameter: From 6mm -60mm for your choice 2. Length: From 1 meter to 9 meters (customized) 3. Coating: 0.8mm -3mm (customized) Contact: cici[@]jsxrgy.com Website: https://www.metallurgicalchina.com

Minimum Order: 1000

Product Description  Oxylance Lance Tube – Tailor Made For The Pyrometallurgical Industry Oxylance oxygen lances are consumable steel tubes used in the manufacturing process of various ferrous and non ferrous metals. Jiangsu Xingrui Piping produces oxygen lance tube strictly in accordance with SABS 62’s rigorous specifications. Oxygen lances are used in the pyrometallurgical environment as follows: Tapping operations and decarburising in electric arc furnaces, oval bottomed tapping furnaces, basic oxygen furnaces, blast furnaces, open hearth furnaces and non ferrous smelting furnaces. Application (1) Oxygen or other gases are transported in electric arc furnace steelmaking to melt and refine steel in an electric arc furnace. (2) Inject other powder additives, adjust steel grades or refine special steel. (3) Remove the slag from the oxygen converter. (4)Other uses, such as strong heat resistance, oxidation resistance, sulfuration resistance and corrosion resistance. Supply range 1. Outer Diameter: From 6mm -60mm for your choice 2. Length: From 1 meter to 9 meters (customized) 3. Coating: 0.8mm -3mm  (customized) Contact : cici[@]jsxrgy.com Website : https://www.metallurgicalchina.com

Minimum Order: 1000

Oxygen Lance Pipe 1. Plain oxygen lance pipe 2. Ceramic coated oxygen lance pipe 3. Calorized oxygen lance pipe 4. Ceramic coated and calorized oxygen lance pipe Welded tube and seamless tube is available. Oxygen Lance is a hollow electric welded tube used in various sizes from 1/8〃 to 2〃 inside diameter. Oxygen Lance Pipe comes in a variety of end finishes. End caps are provided to prevent contamination.Oxygen Lancing is a reliable method for tapping heats or for other production operations. Oxygen Lance Pipe is used to “DeCarb” (remove the carbon) from molten metal. During the steelmaking process, a desired carbon content is attained by injecting oxygen into the molten metal. This process is used in blast furnaces, basic oxygen furnaces and also induction and electric furnaces Lances are used for opening furnace tap holes, cleaning ladle well blocks, unclogging tundish nozzles, cutting ferrous materials, providing the steel or iron is hot enough to sustain burning, ie cutting skulls, spill clean-up, etc. Supply range 1. Outer Diameter: From 21.4mm-60mm for your choice 2. Length: From 1 meters to 5.5 meters (customized) 3. Coating: 2mm-3mm (customized) Contact: cici[@]jsxrgy.com Website: https://www.metallurgicalchina.com

Minimum Order: 1000