Machinery & Parts

The aluminum degassing machine is between the furnace and the casting machine, the main function is removing hydrogen and other residues. Otherwise, these gases will affect the quality and mechanical properties of aluminum and its alloys.

Minimum Order: 1 bags

AdTech molten aluminum filtration equipment can effectively filter and block the micron impurities of the liquid aluminum, matching with the ceramic foam filter. It replaces the high-cost ceramic tube filter equipment and ordinary plate filter equipment products. AdTech filtering unit is mainly used in the aluminum alloy casting industry. AdTech filter box system is used to treat molten aluminum, improve metal quality and remove inclusions prior to metal casting.

Minimum Order: 1 bags

PRODUCT DESCRIPTION 304 stainless steel mixer /mixing tank 1000L BLD09-11-0.75KW Advantages: 1. One-time molding, good integrity, no welds, no leakage, good impact resistance, high tensile strength, oxidation resistance, good aging resistance, food grade. 2. Using LLDPE as raw material, rotomolding storage tank, the service life is more than 20 years. 3. Anti-corrosion inside and outside. 4. The general storage tank use conditions are normal temperature and normal pressure. In special cases, the storage tank use conditions can be described as temperature less than 70℃ and hydraulic pressure less than 1kg/㎡. Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 0Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 1Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 2Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 3Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 4Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 5Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 6Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 7Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 8Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 9Petrochemical 1450mm Height Poly Mixing Tank 380V 415V 10

LM Vertical Mill integrates crushing, drying, grinding, classifying and conveying together, and it is specialized in processing non-metallic minerals, pulverized coal and slag. Its coverage area is reduced by 50% compared with ball mill, and the energy consumption is saved by 30%-40% similarly. Applications: Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics. Capacity: 10-50tph, 50-100tph, 100-300tph, 300-500tph, whatsapp:+8617530851892 email:lm , lq9981@gmail.com

Based on interchangeability and associativity of crushing unit and screening unit, crushing and screening mobile crusher can realize complex processing technology. Whether first crushing and then screening or first screening and then crushing, this machine provides efficiency and convenient operation mode. Applications: Secondary medium & fine crusher is widely used in mining, quarry, mixing and batching plant, road and building construction, highway, railway and subway, and water conservancy. Capacity: 10-50tph, 50-100tph, 100-300tph, 300-500tph, whatsapp:+8617530851892 email:lm , lq9981@gmail.com

NK series mobile crusher is new generation of mobile crushing station equipped with intelligent control system. It makes all components completely airborne, so there is no need to install machine and pour foundation. It can be put into use as soon as it arrives at the production site, which is very flexible. Applications: Metal and non-metallic mines, cement, aggregate, metallurgy, construction waste Capacity: 10-50tph, 50-100tph, 100-300tph, 300-500tph, whatsapp:+8617530851892 email:lm , lq9981@gmail.com

HGT Hydraulic Gyratory Crusher is a primary crusher integrated mechanical, hydraulic, electrical, automated and intelligent control together. And the automatic control system, its the greatest feature, makes operation more convenient. Applications: Mining, metallurgy, construction, chemical, cement, refractory material, ceramics, etc. Capacity: 10-50tph, 50-100tph, 100-300tph, 300-500tph, whatsapp:+8617530851892 email:lm , lq9981@gmail.com

Refractory fiber cone is also called ceramic fiber tap out cone. The furnace tap out cone is mainly used for controlling the liquid metal flow. AdTech refractory tap out cone adopts high-aluminum fiber, forms by the vacuum suction automatic equipment molding process. Each cone has a flat surface. More importantly, it has the features of appropriate hardness and toughness, not fragile, not peeling. Ceramic fiber tap out cone is suitable for mechanical or manual plugging and removal operations. AdTech ceramic fiber tap out cones are used in aluminum furnaces, fixed furnaces and other aluminum outlets. It makes the casting process of aluminum alloys more convenient, safe, and reliable.

Minimum Order: 1 bags

The aluminum silicate casting nozzle material is a key component of the aluminum strip continuous casting and rolling mill. Its quality directly affects the quality of the strip and the yield of production. The aluminum silicate casting nozzle material depends on the performance and It can be divided into multiple models if necessary. AdTech casting tips are dimensionally stable, thermal shock resistant and do not cause outgassing. Ceramic caster tip can effectively protect the quality of the cast and rolled coils. It is best used together with boron nitride paint. AdTech caster tip is used to produce high-grade aluminum alloy. Ceramic fiber caster tip consists of alumina ceramic liner and castertip ear. AdTech offers all of the component pieces required for continuous casting tip assemblies such as end dams, spacer boards, internal baffles, boron nitride coatings.

Minimum Order: 1 bags

Product Name heavy duty cast iron floor drain grate Material Composition Iron, Ductile iron sealed single or double lock available Color Option according to customer's requirement Application Be widely used in Inspection wells of power, telecommunication, mobile communication, fuel Sewer, gas pipes,gas station, chemical bases, urban arteries, high-grade highways, expressways, freight transport piers, airports,etc. Surface Treatment Painting, Powder coating, spraying, galvanization, chrome plating type Weight type: Applicable to urban roads and fast lanes. normal type: Applicable to Driveway Lightweight: Applicable to non-motor vehicle lanes, residential quarters, park squares, https://www.drainmanhole.com/produ , ct-ductile-iron-grating.html Cangzhou Chuangxin Metal Products Co., Ltd. is China's leading SMC municipal drainage and metal product processing R&D manufacturer. It is located in Hebei, China's heavy industrial zone, with the capital Daxing International Airport in the north and Tianjin Port in the east. The company occupies an area of 25,000 square meters. After 16 years of continuous R&D and production, the company has passed the ISO9001:2015 standard, making corporate management and production processes more standardized. Advanced automation equipment has an annual production capacity of 30,000 tons of SMC polymer municipal drainage products and 5,000 tons of metal products. The product range includes SMC composite manhole covers, ductile iron manhole covers, polymer concrete U-shaped drainage channel, drainage cover, metal access panel, metal funnel and other construction materials.

Minimum Order: 100

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent has a certain heating effect, which makes the hot slag recovery more convenient and the recovery rate is higher. Contact sales@adtechamm.com or visit www.adtechamm.com to BUY GRAIN REFINING FLUX. In order to manufacture high-quality aluminum or aluminum alloy profiles, the raw materials of aluminum or aluminum alloy profiles must be refined (refined), which requires a good Refine Flux. Refine Flux generally uses inert gas as a carrier to pass into the aluminum and aluminum alloy melt for degassing and impurity removal. If Refine Flux is used improperly, the following undesirable conditions will occur For example: poor separation of aluminum slag, poor degassing effect, excessive heating effect, increased aluminum burning loss, or no heating effect, resulting in the inability to recover hot slag. In general, before degassing and impurity removal of aluminum and aluminum alloy melts, the H (hydrogen) content is often more than 0.30ml/100gAl. If the raw materials are not good enough, the H content may even exceed 0.40ml/100gAl. Good quality refining The agent can divide the H content of the aluminum melt in the furnace to the level of 0.18ml/100gAl. When the flux is added to the aluminum alloy melt, it melts into flux droplets. Since the specific gravity of the flux is smaller than that of the melt, the flux droplets float in the melt. In the process of floating, it will meet the particles of non-metallic inclusions in the melt. Since the surface tension of the flux at the interface of the non-metallic inclusions is small, the flux can wet the non-metallic inclusions and make them adsorb to the flux droplets. The flux has a large surface tension at the interface of the molten aluminum and does not infiltrate, so the flux can surface with the adsorbed non-metallic inclusions under the action of the difference in specific gravity, and then be removed by slagging. This kind of slagging is generally called Slagging for flotation. Refine Flux has the following characteristics 1.It has a certain dissolving ability for oxides. 2.Enough to increase the fluidity of molten flux. 3. It can effectively remove the oxide film on the surface of the melt and improve the degassing effect. 4. Increase the surface tension of the mixed molten salt, spheroidize the molten salt that has adsorbed oxides, facilitate separation from the melt, reduce the loss caused by the solid molten slag entrapped in aluminum, and increase the surface tension of the flux-melt , Accelerate the process of volume adsorption inclusion.

Minimum Order: 1 bags