Machinery & Parts

We are providing such plug system platens to Italy's largest laminating press maker and which has the extreme high quality requirement;deep hole must be drilled from longitudial direction and platen thickness is only 37mm and 20mm diameter drilling must have precise tolerance in the middle joints,so we are providing high precise CNC gun drilling;as they are screw plug system plug sealed and high pressure working,so we must have a tight screw basement hole size,then we can have a tight screw to hold on the plug then pressure.In a word those platens are all by tight tolerance produced and quality control is extremely strict: The quality requirement has been detailed from Raw steel plate grade and source to finished hot platen packing: Raw steel:Q345B/A36/S355JR/S235JR SIZE:1300*2500/3000/3500*40mm Deep hole diameter:20/22/25/28/30/35mm And drilling from both ends and middle joints tolerance within 1 mm CNC machining for width and length are applicable in order for precise assembly Surface grinding quality has been specific higher requirement for RA 0.8 Parallizm 0.1mm Flatness:0.10mm,any thickness minus tolerance and defects are not allowed Surface RA 0.8 Parallizm 0.1mm Hydraulic Testing:100kg/cm2 holding time 20 munites temperature tolerance within 3 c-degrees Production flow:Rough surface milling-deep hole drilling;slotting;weldings;CNC precise milling;rough grinding;CNC grinding-testing-packing-container loading Solid drilled hot press platen 1300*3000*37mm for Sergiani 10 daylight patented multi-daylights hot press

Aluminium Coil Coating Line - Litong Why is it necessary to coated aluminium coil or plastics with an aluminium coating? To prevent corrosion of items as well as aesthetics. The first continuous coil painting line, invented by Joseph Hunter, laid the groundwork for the subsequent development of industrial automation. Smalls says it was a very cost effective way of painting metal. So what are the main equipment and process of aluminum coil coating line? I. Main coating equipment 1. Terminal equipment and aluminum coil coaters. 2. Metal treatment. 3. Primer/topcoat applicator. 4. Air cooling and water quenching; air cooling is used to reduce the strip PMT (peak metal temperature) to about 150-170 degrees Celsius. 5. Process control. 6. Tension straightener; this is where a high degree of control is required and aluminum color coated coils can be as light as 0.18mm (equivalent to 0.06mm steel). 7. Chemical coating machine. 8. Main/finish drying box. 9. Hot/cold laminators; can increase the advantages of material stiffness 10. Installation service. II. Coil coating process flow 1. Production management of pre-treatment stage of coating line. Aluminum coils must be surface treated to remove oil and rust before powder coating. There are more chemicals used in this stage, mainly rust remover, degreasing agent, table conditioning agent, phosphating agent, etc. 2. Powder coating Ensure that the sprayed aluminum rolls are evenly powdered and of uniform thickness to prevent defects such as thin spraying, leakage spraying, rubbing off, etc. Before entering curing, the powder attached to it should be blown off as far as possible to facilitate uniform powdering of aluminum rolls. 3. Heating curing Baking in strict accordance with the process and temperature and time control, pay practical attention to prevent color difference, over-baking or too short a time caused by insufficient curing. 4.Final installation and transportation Characteristics of LITONG aluminum coil coating line 1. Adopt high precision roll coating machine, excellent coating quality. 2. Suitable for acrylic, polyester, and polyvinylidene fluoride (PVDF) coatings. 3. Specifically designed to fit the area of the customer's plant. 4. Fine coating in accordance with international standards. 5. Easy to operate controls, online operator training available. In short aluminum color coating provides a versatile product for the construction industry. Incorrect line design can lead to high scrap rates or inability to handle the full range of products, resulting in far lower production yields and incalculable losses, choosing the right coating line plant and aluminum coil coating machinery is critical for your painted aluminium coils. Please feel free to contact us to discuss your requirements.

TZ1600-100 Food Grade High-Speed Coating Line Coating line features: TZ1600-100 is a food-grade high-speed coating line with full sealing dust-free workshop. The products of this coating line apply to can ends & tabs. The pretreament process is different with other coating lines to meet the requirement of food-grade product. Expanding shaft loading system and waste gas treatment system is always recommended. Application: For coating food grade aluminium and tinplate coils using for beverage can ends & tabs, Food can front ends & tabs, Food can bottom ends, PP caps, Closures, Aerosol can ends & components, Capacitors, etc. Advantage:Food grade, high speed coating line, continuous production with loopers Main parameters of coating line Material parameter Thickness: 0.20～0.5mm Width: 700～1650mm Outer diameter OD(max): Φ2000mm Inner diameter: Φ505mm Bobbin material: Paper Inverval-layers deviation tolerance: ≤0.5 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerance: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thickness: Topside/back side dry film thickness: 5~13 g/㎡, total dry film thickness less than 13 g/㎡ Product Weight: Max12000kg（Excluding bobbin）   CCL Processing Speed: 40 m/min (Speed benchmark: thickness 0.3mm coil exclude PVDF coating)   Heating Energy Source: LNG, LPG   Roller coating Process: Continuous 2 sides 3 coating & 2 baking   Properties and features: Roller width: 1900 Coils feeding centering adjustment : ±100mm Threading speed: 5～15m/min（Adjustable） Line maximum speed: 100m/min Line speed accuracy: Steady Speed, ±0.1%; Acceleration, ±0.4% Uncoiling tension range: 200～500kgf Processing tension range: 300～850kgf Coiling tension range: 500～1300kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 140m*14.2m*9m Heating Energy Source: LNG,LPG   2.Basic Production Process Coil loading → Uncoil machine → Convey device → Cutting device → Sewing table → Tension device 1 → entrance accumulator → CPC 1 → Tension device 2 → Pretreatment (Including Degreasing, Water washing, Neutralizing, Water washingdrying,  Deionized water washing, Drying, CPC 2, Roller-coating chromizing, Drying) → CPC 3 → Tension device 3 → Topside / backside roller-coater → Curing oven → Air cooling → Water cooling roller →Tension device 4 → CPC 4 → Rear accumulator → Tension device 5 → 2 rollers convey device → Cutting device → Coil machine → Coil discharging   3.Main devices list Name Quantity Coil loading device 2 Uncoil machine 2 Coil loading platform 1 Convey device 3 Cutting device 2 Sewing table 1 Tension Device 5 Accumulator 2 Redirection steel roller 9 Degrease pool 3 Brushing roller 2 Water washing pool 5 Neutralizing pool 1 Squeeze roller 14 Air drying device 1 Roller-coating chromizing coater 1 Chromizing drying oven 1 Coater 1 Curing oven 1 Air cooling system 3 Coil machine 1 Coil discharging device 1 CPC 5 EPC 1 Hydraulic system 3 Electrical system 1 Steel frame 1 Lift 1   4.Water and power consumption of coating line Total power consumption: 830KW Compressed air: Min5.5bar, 1Nm3/min, actual consumption 0.5Nm3/min Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.2 CBM/min LNG consumption: 0.4 CBM/min 5. The coating line design and manufacture leads 100 days, installation and testing leads 60 days. 6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

TZ1600-35 2-Sides 2-Coatings Aluminium Production Line (Separated) Coating line features: Model TZ1600-35 coating line (separated structure) is suitable for certain coating factories. 2-sides 2-coating coating products in thickness range 0.15mm~0.6mm applies to most ACP material, roofing and ceiling material. Model TZ1600-35 coating line is high quality coating line, good performance in all kinds of paint coating. Separated structure is flexible in production, pretreatment process and coating process are separated and non-interfering, so that production is much easier to plan or schedule. Operation faults and equipment problems effect is less. A primary reason to choose separated structure is its advantage over dimension, Model TZ1600-35 requires only 85m×18m×7m workshop. Application: For coating aluminium coil of ACP(Aluminium Composite Panel), roofing , cladding, ceiling,roller shutter,etc. Advantage: Widely usage range, short line, smaller dimension workshop needed,  less operation faults and equipment problems effect . 1. Main parameters of coating line Material parameter Thickness: 0.15～0.6mm Width: 1600mm Outer diameter OD(max): Φ1500mm Inner diameter: Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerance: ≤0.8 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerance: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thickness: Dry film thickness: 8~20 um   Product Weight: Max 5000kg（Excluding bobbin）   CCL Processing Speed: 35 m/min (Speed benchmark: thickness 0.25mm coil exclude PVDF coating)   Heating Energy Source: LNG, LPG   Roller coating Process: Continuous 2 sides 2 coating & 2 baking   Properties and features: Roller width: 1800mm Coils feeding centering adjustment : ±75mm Threading speed: 5～15m/min（Adjustable） Line maximum speed: 35m/min Line speed accuracy: Steady Speed, ±0.1%; Acceleration, ±0.4% Uncoiling tension range: 160～800kgf Processing tension range: 160～800kgf Coiling tension range: 320～1400kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 76000mm×1000mm×6500mm Heating Energy Source: LNG, LPG   2. Basic Production Process Coating line Coil loading → Uncoil machine → Sewing table → Topside primer-paint roller-coater → Curing oven 1 → Air cooling → CPC 1 → Tension device 1 →Topside 2-coat and backside roller-coater → Curing oven 2 → CPC 2 → Tension device 2 → Coil machiner → Coil discharging   Pretreatment line Coil loading → Uncoil machine → Sewing table → Acid washing, brushing roller → Water washing → Deionized water washing → Drying → Roller- coating chromizing → Drying → Cooling → Tension device → Coil machine → Coil discharging   Rewinding line Coil loading → Uncoil machine → Sewing table → Tension device → Coil machine → Coil discharging   3. Main devices list Name Quantity Uncoil machine 3 Sewing table 3 Tension Device 4 Redirection steel roller 11 Brushing roller 2 Degrease pool 3 Water washing pool 2 Drying device 2 Squeeze roller 5 Roller-coating chromizing coater 1 Coater 2 Curing oven 2 Heat system 2 Air cooling system 4 Film device 1 Coil machine 3 CPC 2 EPC 3 Steel frame 1 Electrical system 3 *Optional configuration: waste gas treatment and energy recycle system   4. Water and power consumption of coating line Total power consumption: 600KW Compressed air: Min5.5bar,1Nm3/min,actual consumption Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.6 CBM/min LNG consumption: 1 CBM/min 5.The coating line design and manufacture leads 100 days, installation and testing leads 60 days. 6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

TZ1300-25 1-side 1-coating Line Coating line functions: This is an economic sort of coating line relate to slim ACP top/bottom coil coating. Product thickness 0.02 mm ~ 0.1 mm appropriates for dividing panels This coating line is an enhance for those coating factories which intend to enhance product variety. It also matches factories in restricted measurement. Application: For coating top coil and bottom coil of ACP( Aluminium Composite Panel), specially for coating slim gauge aluminium coil making use of for dividing panels. Advantage: Economical and also easy to use, tiny dimension workshop needed 1. Main parameters of coatingline Material parameter Thickness: 0.02～0.1mm Width: 1240mm Outer diameter OD(max): Φ1100mm Inner diameter: Φ150mm, Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerance: ≤0.8 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerance: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thickness: Dry film thickness: 8~15 um   Product Weight: Max 3000kg（Excluding bobbin） CCL Processing Speed: 25 m/min (Speed benchmark: thickness 0.1mm coil exclude PVDF coating)   Heating Energy Source: LNG, LPG   Roller coating Process: Continuous 1 side 1 coating & baking   Properties and features: Roller width: 1500mm Coils feeding centering adjustment : ±75mm Threading speed: 5～10m/min（Adjustable） Line maximum speed: 25m/min Line speed accuracy: Steady Speed, ±0.1%;Acceleration, ±0.4% Uncoiling tension range: 80～150kgf Processing tension range: 80～150kgf Coiling tension range: 80～200kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 55000mm×7500mm×6000mm Heating Energy Source: LNG, LPG   2. Basic Production Process Coil loading → Uncoil machine → Pretreatment (Including Degreasing, Water washing) → Chromizing → Drying → Re-direction → Topside roller-coating → Curing oven → Cooling → Tension machine → Recoiler → Coil discharging   3. Main devices list Name Quantity Coil loading device 1 Sewing table 1 Pretreatment line 1 Drying device 1 Coater 1 Curing Oven 1 Heating system 3 Air cooling devices 1 3-rollers cooling device 1 Tension device 1 Recoil machine 1 Electrical system 1 *Optional configuration: waste gas treatment and energy recycle system.   4. Water and power consumption of coating line Total power consumption: 50KW Compressed air: Min5.5bar，1Nm3/min，actual consumption 0.5Nm3/min Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.2 CBM/min LNG consumption: 0.5 CBM/min 5. The coating line design and manufacture leads 90 days, installation and testing leads 60 days. 6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

TZ1600-30 Single-Coating Aluminium Coating Line Coating line features: This is an economic type of coating line apply to most ACP top/bottom coil coating. Product thickness 0.1mm~0.5mm is common used for ACP. This coating line can also produce some gauges of roofing coils. With a rewinding line, this coating line meets basic requirements from raw material to finished product of coating factory. The line requires a minimum 70m×12m×7m workshop dimension, which suits most factories in limited dimension. Application: For coating top coil and bottom coil of ACP(Aluminium Composite Panel) Advantage: Economical and easy to use, small dimension workshop needed   1. Main parameters of coating line   Material parameter Thickness: 0.1～0.5mm Width: 1600mm Outer diameter OD(max): Φ1400mm Inner diameter: Φ150mm, Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerence: ≤0.8 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerence: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thicknes: Dry film thickness: 8~20 um Product Weight: Max 4000kg（Excluding bobbin）   CCL Processing Speed: 30 m/min (Speed benchmark: thickness 0.25mm coil exclude PVDF coating) Heating Energy Source: LNG, LPG Roller coating Process: Continuous 1 side 1 coating & baking Properties and features: Roller width: 1800mm Coils feeding centering adjustment : ±75mm Threading speed: 5～15m/min（Adjustable） Line maximum speed: 30m/min Line speed accuracy: Steady Speed, ±0.1%;Acceleration, ±0.4% Uncoiling tension range: 160～700kgf Processing tension range: 160～700kgf Coiling tension range: 320～1200kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 55000mm×7.500mm×6000mm Heating Energy Source: LNG, LPG 2. Basic Production Process Coil loading → Uncoil machine → Pretreatment (Including Degreasing, Roller brushing device, drying) → Chromizing → Drying → Re-direction → Topside roller-coating → Curing oven → Cooling  → Tension machine → Recoiler → Coil discharging   3. Main devices list Name Quantity Coil loading device 1 Sewing table 1 Pretreatment line 1 3M water drying device 1 Chromizing Coater 1 Chromizing drying device 1 Coater 1 Curing Oven 1 Heating system 4 Air cooling devices 1 3-rollers cooling device 1 Tension device 1 Recoil machine 1 Electrical system 1 Rewinding line 1 Coil loading machine 1 Tension device 1 Coil discharging machine 1 *Optional configuration: waste gas treatment and energy recycle system.   4. Water and power consumption of coating line Total power consumption: 80KW Compressed air: Min5.5bar，1Nm3/min, actual consumption 0.5Nm3/min Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.2 CBM/min LNG consumption: 0.5 CBM/min 5. The coating line project design and manufacture leads 90 days, installation and testing leads 60 days.  6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

The transformation of Zirconia from tetragonal to monoclinic is large around 5%. It results in limiting its elasticity and fracture and formation of cracks in zirconia ceramics. Zirconia is mixed with calcium oxide (CaO), magnesia (MgO), or yttria (Y2O3) to stabilize in tetragonal or cubic phase. Partially Stabilized Zirconia (PSZ) consists of cubic, tetragonal, including monoclinic phases of zirconia. Tetragonal zirconia polycrystals (TZP) are the purest form of the tetragonal phase compared with other phases. PSZ and TZP are considered for fabrication of the biomedical device and scaffolds. Tables 1.7 and 1.8 summarize the mechanical properties of zirconia ceramics. The strength and fracture toughness of Yttria-TZP ceramics is quite considerable and almost twice that of alumina. Therefore, zirconia heads are less susceptible to the stress when contacting with metal cones. Nowadays most medical-grade zirconia from PSZ tetragonal zirconia is considered for medical device development. It shows minimal microhardness and elastic modulus, good strength, and fracture toughness than that of alumina. Developing ceramic ball heads below 32 mm is possible from Zirconia as it has superior mechanical strength.

PRODUCT DESCRIPTION Innosilicon a11 pro 8g 1500mh 1500mh/s a11pro eth mining Ethereum Asic Miner Machine Specification Product Name Innosilicon a11 pro 1500mh Algorithm EtHash Hashrate 1500m , h Power Consumption 2300W±10% Manufacturer Innosilicon Model A11 Pro ETH (2000Mh) Release Dec 2021 Top Coin Ethereum Size 460mmx200mmx280mm Weight 15kg Noise level 75db Fan(s) 4 Power 2500W Voltage 12V Interface Ethernet Temperature 5 - 45 °C Humidity 5 - 95 %

The extra works for inter-process between these two furnaces and the amount of the heat loss can also be saved 1. Melting Crucible Furnace Introduce -- Use in all foundries or aluminum die casting area – smeltery for feeding holding furnaces or for direct casting. -- Low heat losses through high-quality insulation -- No exhaust system needed -- Accurate temperature control Crucible -- Standard design for the use of graphite crucible 2. Melting Crucible Furnace Data SN Items Data Remarks 1 Efficient furnace capacity kg (Al) 580 2 Melting Rate kg/h (Al) 280 Inside the crucible there is already have 1/3 molten aluminum. 5 Maximum furnace temperature ℃ 950 6 Precision of molten aluminum temperature control ℃ ≤± 5 7 Temperature control mode PID+Dual temperature control 8 Crucible type and size mm OD 880, d 350mm, H 1000 BN800 Morgen 9 Furnace surface temperature rise ℃ ≤50 Except for the installation site of the heating tube, the discharge outlet and rising tube 11 Power Source Voltage V 380 Frequency HZ 50 12 Air Pressure MPa 0.5-0.7

Products Description Metal Halide - By adding other elements/additives such as iron, lead, gallium, indium, etc. to the lamp tube, we can make a range of metal halide lamps. These additives alter the wavelength composition of the UV output of the lamp, making it suitable for deep UV curing of ultra-thick coatings. According to this characteristic, Yuyu metal halide lamps are widely used in PCB, wood-based coating, electronic product coating, optical fiber manufacturing, etc. Lamp Parameter Power output 7KW Wavelength 365nm Arc length 780mm Material High Quality Quartz Tube End caps Ceramic / metal Service life 800 to 1000 hour 1. High Quality Quartz Tubing High temperature resistance,slow UV attenuation, UV light transmittance up to 99%,and long lamp life. 2. High Quality Ceramic Lamp Base Made of high-quality ceramic materials, resistant to high temperatures and not easy to age.

About this item Antminer s19 pro 110TH is shipped from warehouses in Hong Kong and Malaysia. It is a powerful ASIC Bitcoin mining machine. Arrival in 5-7 days as soon as possible. Antminer S19 pro 110T miner 110Thash/s (± 5%) computer power, energy consumption is 3250W (+/- 5%) power Working Temberature: -5 - 40 Centigrade. Working Humidity:5%RH~95%RH, High quality Crypto Bitcoin miner from Bitmain, The latest source of supply., better than S19 J 100TH and 104TH High speed fan is adopted to improve heat dissipation effciency, avoid overheating and prolong miner life The size is 14.57 x 7.68 x 11.42 inches, the weight is 33.4lb. S19 pro 110T could help you save space while providing powerful computing power Please kindly note that the required input voltage for S19 110TH/s is 220V. Wrong input voltage may probably cause miner damaged Tag: bitcoin generator machine, bitcoin mining tool, BTC Mining Machine

thickness:17.5-50MM 2pcs tempered glass on both side caming finished: brass, zinc,patina ,chrome ,black chrome ,antique brass,satin nickel. 200 different glass material for you choice min size :300*200 max size :2300*2000MM customer size /design /color available Project Solution Capability: graphic design, 3D model design Shape: Curve, Flat Technique: Clear Glass, Painted Glass, Frosted Glass, Laminated Glass, Stained Glass, Tempered Glass, Tinted Glass, Wired Glass Style: Contemporary, Simple, Victorian, Floral, Traditional, Unique, Size: Customer's Request Design style: Classical Sample: CAD Drawings Application: Villa Design Style: Traditional Function: Decorative Glass, Insulated Glass Structure: Hollow, Solid Type: Float Glass Usage: Home, Hotel, Mall, Gallery

It is sintered neodymium magnet, it is a powder metallurgy technique.The smelted alloy is made into powder and pressed into a compact in a magnetic field. The compact is sintered in an inert gas or vacuum to achieve densification. In order to improve the coercivity of the magnet, an aging heat treatment is usually required. Popular Grade: N33,N35,N38.N42,N45,N50,N52 N35SH/N38SH/N42SH N30UH/N35UH/N38UH/N40UG 35H/38H/40H/42H/45H/48H Place of Origin:Zhejiang, China Brand Name:COCOMAG Model Number:HL-244 Type:Permanent Composite:NdFeB Magnet Shape:ARC Application:Industrial Magnet, Motor magnets, Speaker Magnets, Jewelry, Tolerance:+/-0.1mm Processing Service:Cutting, Moulding Grade:NdFeB, N35-N50,35M-48M,35H-45H,35SH-45SH,28UH-38UH,28EH-3 , 5EH,28AH- 38AH Product Name:Wind Turbine Generator Magnets Material:Ndfeb Magnets Size:Customed Available Environmental Approved:RoHS Quality Management:ISO/TS16949:2009 Plating/Coating:Ni, Zn, Gold, Copper, Epoxy, etc Tw max:80-220 degree Delivery time:7-10days

Minimum Order: 1000

Antminer S19, rated computing power: 90TH/s; energy efficiency ratio: 36J/TH±5%; wall power consumption: ±5%. It adopts an aluminum alloy profile electromechanical integrated design, parallel four-fan structure, bare metal size is 400*195.5*290mm, and the net weight of the whole machine is about 14.2 kg. The shape is square, simple, and regular, and the space is saved to the greatest extent. SPECIFICATIONS: product name S19 bitcoin machine mining Brand Antminer Algorithm SHA-256 Model S19 Rated Hashrate 90TH/S Power ratio 36J/T Rated Power 3250W Machine size 400*195.5*290 Production currency BTC material Metal