Machinery & Parts

Polyurethane Flip Flop Screen has been in operation for decades for screening of moist or humid materials. Made from highly resilient polyurethane elastomer, these filp flow mats withstand deformation without loss of elasticity or dimensional accuracy. They are designed both for bolting and clamping systems, so to fit all screen decks worldwide with no distinction depending on machine brand, deck dimensions and installation characteristics. Panel size: Length & Width & Thickness are custom designed Aperture size: 3~32mm Aperture shape: Square, Rectangle, Slot, Circular Working Principle of Flip Flop Screen Vibrating Flip Flop Screen are increasingly used in material screening and preparation applications. This is largely due to their high efficiency. In principle, Flip Flop Screen is a subclass of other high-frequency vibrating sieves. The Flip Flop Screen works by combining the double vibration principle with a flexible polyurethane type screen. Dual vibratory forces act to apply a linear acceleration to the material passing through the screen. Vibrations are simultaneously applied to the elastic screen, which stretches and relaxes quickly. The stretching and relaxation of the screen transfers energy to the material, causing it to "jump" or "pop". This secondary vibration in turn enhances the separation of the materials. Advantages of Flip Flop Screen Flip flow screener offers a number of benefits over other equipment. Their compact design is particularly advantageous in both reducing machine footprint and increasing operational efficiency. Because most models require fewer moving parts than alternative screening equipment, flip flop screens are much more modular. High Screening Efficiency With polyurethane screen and streamlined design, the flip flop screen is less prone to mechanical wear and tear. The elastic mesh media used in more than common materials from glass and scrap to fine-grained minerals and slag. The flip-flow screens is ideal for wet and sticky materials. 

Poly ripple screen is produced on the basis of self-cleaning screen grids, available in high-strength steel grids or stainless steel, with PU strips on the bars of the deck. The self-cleaning screen is a non-blinding, high-quality screening surface that provides accurate screening and size. The combination of different sized wires used in fabrication means they vibrate at different frequencies to create a self-cleaning surface. Due to its flat surface, self- cleaning screens can be used in some applications with smaller wire diameters than braided wires. Flakes and strands are separated from the finished product while problems such as clogging are greatly reduced. Specification of Vibrating Screen Medias Size: As required Aperture: 3mm - big Wire Diameter: According to aperture Strip Material: Polyurethane Strip Width: > 1.5cm Strip Thickness: >8mm Strips Quantity: As client's requests Features of Poly Ripple Screen • Anti-clogging • Anti-pegging • Increased wear life • Accurate sizing

Polyweb Urethane Screen Panel is specificialed for Derrick Stack Sizer, mainly for sieving the fine metal sands, such as: silica sands, gold sands etc, the model is TH48-30, TH48-42, TH56-42, others can be designed. Polyweb Urethane Screen Panel is a kind of polyurethane screen panel made of polyurethane sheet with high quality screen surface. Polyweb Urethane Screen Panel is abrasion resistance and much longer service life than the woven vibrating screen mesh. Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously. Polyweb Urethane Screen Panel has an extremely fine openings which is as fine as 0.043mm, which is suitable for a wide variety of wet and dry applications. Specification of Polyweb Urethane Screen Panel  Material: Polyurethane Type: Screen Panel Aperture Range: 0.043mm - 10mm Feature: Wear-resisting, noiseless, light etc Usage: Derrick Stack Sizer Size: TH48-30, 1040*700mm, other size also can be designed as requests Working Time: 6 - 12 months

All the products can process by customizatio , n. Please send us the 2D and 3D drawings ,  with size and tolerance. We will evaluat , e the drawings for you and process accordin , g to the draw ings. And we will keep  , the drawings strictly confidential. Customer , s can also choose  processing methods. Wi , th over 20 years experience, ShenZhen YuJiaX , in Hardware Products Co.,  Ltd. is a lea , ding manufacturer of precision metal parts i , n China, we pr ovide products to consumer ,  electronics, automotive, medical, and indust , ria l.

Minimum Order: 15 packs

All the products can process by customizatio , n. Please send us the 2D and 3D drawings ,  with size and tolerance. We will evaluat , e the drawings for you and process accordin , g to the draw ings. And we will keep  , the drawings strictly confidential. Customer , s can also choose  processing methods. Wi , th over 20 years experience, ShenZhen YuJiaX , in Hardware Products Co.,  Ltd. is a lea , ding manufacturer of precision metal parts i , n China, we pr ovide products to consumer ,  electronics, automotive, medical, and indust , ria l.

Minimum Order: 15 packs

A GLOBAL REPUTATION FOR LEADING-EDGE MANUFACTURING TECHNOLOGY. Suizhou Gaincin Machinery Co.,Ltd(info#GAINCIN.com.cn & showroom: gaincin.store.bossgoo.com)'s steel grinding media is a valuable commodity widely used in power stations for coal grinding, limestone grinding for flue gas desulphurisation, cement production, aerated building block manufacturing and in the mining industry, especially in gold, silver, copper and zinc mines.We also produce mild steel balls for use in ornamental ironwork to act as decorative finials on steel gates and railings. Rolled Steel Balls The major advantage of precision ball rolling, compared with traditional forging methods, is the uninterrupted grain flow. Grinding balls are rolled from selected carbon and alloy steels, produced to a customer’s precise specifications. A special feature of GAINCIN’s manufacturing process is the computerised quench facility, giving uniform surface hardness and controlled cross-sectional hardness essential for very even wear. Quality Control and Hardness Measurement In the long term, the effectiveness of grinding media must be measured by the final cost per tonne of product efficiently ground.GAINCIN's advanced manufacturing methods and materials guarantee the maintenance of the geometrical tolerances and correct structures vital to reliable, consistent performance and long life. GAINCIN’s products are rigorouslytested to ensure that they meet the agreed specifications. BALL HARDNESS:THRU HARD’OR‘TOUGH CORE’ GAINCIN’s expertise will ensure that you specify the most suitable grinding media for your particular application. GAINCIN’s ‘thru hard’ ball has a uniform high hardness from surface to core, thus maintaining very good wear properties down to very small diameters.The ‘tough core’ ball has a hard outer layer for long life, coupled with a tough, resilient core giving good impact resistance. Presenting the Hard Facts on Average Volumetric Hardness How hard is hard? The illustrations shown below tell an interesting story. Illustration ‘A’ shows an analysis of the cross sectional hardness of GAINCIN ‘thru hard’ ball. Illustration ‘B’ below shows the same analysis carried out on a ball from another major grinding media manufacturer. The ball in illustration ‘B’ has the same AVH figure as The GAINCIN’s ball and will wear out at the same time. Yet there the similarity ends. After three quarters of the radius, the hardness of the ‘B’ ball dips below that of GAINCIN’s ball. This brings into focus the area of greatest discussion about using AVH values. Over 72% of the final value is made up from the surface and 3/4 radius hardness readings. So AVH tells us relatively little about how a ball is going to perform once it has worn past that stage. The cross sectional hardness profile tells the full ‘inside story’. Q What kind of performance will the ball in illustration ‘B’ below give? A Once the ball has worn down to approximately 2/3 diameter, the remainder will wear away very quickly. Q How will this affect the mill output? A The rapidly wearing grinding media will give rise to an unstable and imbalanced ball charge, resulting in the possibility of more than one top up size being required to ensure the correct mesh of grind. Q How will GAINCIN’s ball perform? A The cross sectional hardness profile shows that GAINCIN’s ‘thru hard’ ball will wear evenly throughout its life. This will give a better size distribution in the mill, and avoid ‘dead zone grinding’. The shape of the ball will be preserved for much longer, giving a far more efficient grind. AVH =0.289 x Surface Hardness (S) + 0.437 x Hardness 3⁄4 R + 0.203 x Hardness 1⁄2 R + 0.063 x Hardness 1⁄4 R + 0.008 x Centre Hardness (C) The conclusions are obvious. High quality such as GAINCIN offers always saves money in the long run. Suizhou Gaincin Machinery Co., Ltd Address: no.1704,economic and technical development zone,Suizhou,P.R.China E-mail:Info@gaincin.com. , cn Kimy.Lee@gaincin.com.cn Tel: 86-722-358 8806 Fax: 86-722-358 8806 x 8002

Minimum Order: 10 long tons

Green silicon carbide crystals have high purity and hardness. You can find the wide applications of green silicon carbide powder in machining hard alloy, metal and non-metallic materials. For instance, materials with hard and brittle characteristics like copper, brass, aluminum, magnesium, jewelry, optical glas can all be processed by green silicon carbide grit. It is also a ceramic material for ultra-micropower. As one of the professional green silicon carbide manufacturers and green silicon carbide suppliers in China, HAOYUN can provide you with quality green silicon carbide powder wholesale. As for the production process of our green silicon carbide powder is very similar to the production of black silicon carbide powder. Green Silicon Carbide Specifications Purpose Specification Chemical Composition (%) Magnetic Material Content(%)max Abrasives Grade SiC min F.C max Fe2O3max grain 12-80 99 0.2 0.2 0.018 90-150 98.5 0.25 0.5 0.015 180-220 97.5 0.25 0.7 0.012 micro powder 240-4000 96 0.3 0.8 — Refractory Grade Group Size 0-1mm 99 0.35 0.7 — 1-3mm 3-5mm 5-8mm Fine Powder -180mesh 98 0.35 0.7 — -200mesh -240mesh -320mesh color green Hardness(mohs) 9.15 Melting point(℃) 2250 Maximum service temperature(℃) 1900 Ture density(g/cm3) 3.9 Available Sizes GRIT JIS #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 FEPA F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 Powder JIS #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500#3000 #4000 #6000 FEPA F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 Green Silicon Carbide Powder Applications 01 Green silicon carbide powder is suitable for grinding high-speed, high carbon steel 02 High-grade refractory materials 03 Abrasives tool 04 Grinding and polishing 05 Ceramics 06 LED 07 Sandblasting 08 Aviation , 09 Wire-electrode cutting 010. 10 Photovoltaic and solar energy There are many abrasive material suppliers in China, but we are one of the best choices for you.

Screening Muddy Soil Roller Screening Machine Large Throughput Stable Operation Equipment Description The Roller Screening Machine is the equipment used for screening ore in the mine crushing system, which is widely used. It has strong adaptability to ores, and its screening effect is very good for ores with silt or high water content. The Roller Screening Machine can improve the efficiency of the subsequent crushing process, so its feedback in the industry is very good, and it is very popular among customers. The model of this Roller Screening Machine is XCDRS1410, which is mainly composed of frame, bearing, lining plate, reduction motor, cleaning device, etc. It has 10 roller shafts, which are arranged with a certain inclination angle, which can make the mineral do "parabolic movement" to achieve better effect of debris separation. The surface width of the roller shaft is 1400 mm. The widening design increases the throughput of the equipment, which is about 364-896 tons per hour, and is commonly used in medium crushing production lines. Technical Reference Data Model Roll surface width (mm) Number of axes Throughput (t/h) Feed side length (mm) Roll shaft clearance (mm) Screening efficiency (%) Installed power Flap drive push rod (optional for for electro hydraulic users) Power (kw) Number Model Thrust (kgf) Power (w) XCDRS1008 1000 8 140-385 ≤500 25-100 80 2-4 8 DT or DTY 300 370 XCDRS1010 10 168-490 85 3-3.5 10 XCDRS1012 12 210-595 90 12 XCDRS1408 1400 8 294-700 ≤700 35-120 80 8 DT or DTY 500 750 XCDRS1410 10 364-896 85 3-7.5 10 XCDRS1412 12 455-1050 90 12 Picture Display Screening Muddy Stone And Soil Separator Roller Screen 364 To 896 TPH Large Throughput Stable Operation 0 Screening Muddy Stone And Soil Separator Roller Screen 364 To 896 TPH Large Throughput Stable Operation 1 Screening Muddy Stone And Soil Separator Roller Screen 364 To 896 TPH Large Throughput Stable Operation 2

Payment: Paypal.western Union.TT Packing: Carton Box Our products are mainly produced by four processes, including casting, powder metallurgy, numerical control and metal injection molding. The main raw materials are: iron alloy, iron-nickel alloy, titanium alloy, stainless steel, etc.

Minimum Order: 10 long tons

4 Meter / Min Servo Motor Glazed Tile Roll Forming Machine new style cutter Details No 1 Total power 5.5 + 4 KW 2 Rows of rollers 18 Rows 3 Diameter OF shaft ￠70mm 4 Voltage 380V 50Hz 3phases 5 Thickness 0.6 mm Pressure tile machine equipment features: The device has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold replacement, etc. The whole unit automatic control system adopts a highly integrated network, which makes the performance of the automation system more superior; the device uses a high level of automatic control Software, to achieve the production of information management In the process of color plate straightening produced by tile press equipment, the profiles will move from top to bottom, left to right, and require the gap between the straightening mechanism and the profile to be relatively loose. There can be a certain gap between the straight body and the top, bottom, left and right surfaces of the profile. The gap size is between 0.01-0.05in (0.25- 1.25mm). If the straightening is torsionally deformed, the gap can be smaller. TEJA TOLEDO Glazed Tile Roll Forming Machine 0 Color steel tile equipment debugging 1. First of all, the four horns of the front and rear linings of the color steel press machine are the same from the height of the upper end of the shaft, and then from the first row to the last row, find a straight line, check, and Whether the axis is in a straight line, adjust the left and right sides of the lower axis to be level. 2, the first row and the last row of color steel tile machine equipment to find a good center, and then tighten the two sides to lock nut, in the middle of the center wheel before and after the pull a good line, the upper and lower axis clearance adjustment After that, you can adjust the machine straight. 3, color steel tile machine equipment - pressure tile machine pressure plate deviation debugging method, such as the plate running to the right, pad left (feeder), or fall to the right bottom level (the first axis off the first few axis The upper shaft falls with the bottom shaft). TEJA TOLEDO Glazed Tile Roll Forming Machine 1 Double layer machine features: 1. One machine and two uses: small floor space, convenient transportation, cost saving; 2. High production efficiency: two types of color steel tile can be produced at the same time. The production efficiency is greatly improved. 3, automatic production: the use of industrial PLC computer frequency control, automatic feeding, cutting a molding, easy operation and maintenance. TIPS: TEJA TOLEDO Glazed Tile Roll Forming Machine 2 How to operate the color tile machine correctly? Although there are many types of color steel tile machine, but the correct operation method is exactly the same. 1. After the installation of the color steel tile tile machine equipment is completed, first check whether certain fasteners are still fastened, because the long-distance transportation of the equipment may inevitably cause the fasteners to loosen. 2. After the steel tile tile machine equipment is connected to the power supply, check the positive and negative of a device to see if it needs to be inverted. 3. Fit the chain protection cover 4. Cut a 2 meter board, and turn on the board to make it go out smoothly, and listen to whether there is any change in the equipment. If there is a deviation, please fine-tune the direction of the feed rack. If there is no problem, you can start production.

Item Purple triangular copper profile Standard ASTM, AISI, JIS, ISO, EN, BS, GB, etc. Material T1, T2, T3, C11000, C11100, C11300, C11400, C11500, C1100, TU1, TU2, C10200, C1020 , TP1, TP2, C12000,C12200, C14500, C14700, C15000, C1201, C1220, etc. Size Length: as customers' requirement. Size can be customized according to customer needs. Surface Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. Application Can be used as anti-slip copper strips, decorative copper strips, mechanical equipment copper strips, etc. Export to America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. Package Standard export package or as required. Price term EXW, FOB, CIF, CFR, CNF, etc. Payment T/T,Western Union,L/C,etc. Certificates TUV&ISO&GL&BV, etc.

Minimum Order: 1 bags

（Prices and details can be contacted by email or phone） Flange Parts are important joining function parts, which used in many important connection joint of devices and machinery. It normally connect pipe system with other equipment, valves, etc. while offering reliable connection effect and allows dismissing and changing to improve updating of the joint connection. So, in some way, flange parts are many choices of devices to replace welding connection. Normally Flange parts are made of metal materials, such as Aluminum, Steel, Stainless Steel, etc. It is made by CNC turning and milling process, or made by CNC machining center machine with multi processes combine. The finishing treatments on flange parts depends on the material used and the devices function. none-treatment, or anodizing, or passivation or coating are commonly used on flange parts surface. Asianstar produces flange parts for clients with long term experience. We understand the flange parts function and its key point of fixing positioning, our skillful team can produce small and large flange parts with best solution to make sure the products in qualified result. https://www.asianstarcnc.com/products/f , lange-parts

Minimum Order: 1 bags

Pump Out Reverse Circulating Valve / Circulating Sub For Drill Stem Testing Service The Pump Out Reverse Circulating Valve is a Hollow Plug Impact type Circulating Sub. The Pump Out Reverse Circulating Valve is used in the more difficult well testing operations, where depth and high-pressure differential across the plug sometimes make it difficult to open a conventional reversing sub. The Pump Out Reversing Sub allows removal of free oil or gas in the pipe (minimizing the risk of fire) while the tool is coming out of the hole. It is also used to circulate and condition the drilling fluid when necessary. The Pump Out Reversing Circulating Valve / Circulating Sub also equipped with a shear pin with plate to be a backup device in case the plug can not be broken by flute bar, applying the tubing pressure, the pin can be sheared by the pressure and build the communication. Technical parameter of Pump Out Reverse Circulating Valve 1 OD 5”(127.5mm) 4.25”(108mm) 6.25”(158.8mm) 2 ID 57mm 45mm 82mm 3 Length 500mm 450mm 520mm 4 Working Pressure 35Mpa(5000psi) 35Mpa(5000psi) 35Mpa(5000psi) 5 Tensile Strength 2034KN 1418KN 2882KN 6 Burst Pressure 165Mpa 156Mpa 182Mpa 7 Collapse Pressure 148Mpa 146Mpa 168Mpa 8 Torque Strength 43kN.m 21.6kN.m 55kN.m 9 Working Temp. -29oC~180oC 10 Service H2S NACE MR0175(Above 175F) 11 Connection Thread 3 1/2” /EUE/IF/ CAS Box Pin 3 1/2” /EUE/IF/ CAS Box Pin 4 1/2” IF Box Pin

Silicon steel is low carbon special steel ≤C(0.08%), Si(1.0～4.5%), its producing process is complicated and making cost is higher. It has characters of high magnetoconductivity, low coercive force and high resistivity and thus little loss of hysteresis and eddy current, the purity of silicon steel sheet must be high, sheet surface must be very flat and clean, silicon steel sheet covers 1% of whole steel production, whose main application is motors, transformers, electric appliances, meters, etc. In this condition, the processing equipment for silicon steel sheet must be very precise. Max yield strength: 450Mpa, max tensile strength: 600Mpa Hardness HV100-220, elongation 15% -45%