Machinery & Parts

Sanping Arm Cylinder Seal Kit Arm seal kit also know as arm cylinder seal kit.The seal kit introduce know is used on the arm hydraulic cylinder of excavator,Mainly used to prevent hydraulic oil leakage and ensure that the middle arm can be used normally. Why Choose Sanping Arm Cylinder Seal Kit? Versatility: china arm seal kit are available in a variety of sizes and shapes, allowing them to be used in a variety of applications. Cost: Arm cylinder seal kits are generally less expensive than other sealing solutions, making them a more affordable option. Maintenance: Arm cylinder seal kits are easy to maintain, increasing the life of the seal. Arm Cylinder Seal Kit FAQs How Does Arm Cylinder Seal Kit Work? Arm cylinder seal kits are composed of two main components: the seal itself and the seal housing. The seal is made from a rubber material and is usually shaped in an oval or circular shape. The seal housing is a metal cylinder that is attached to the arm or shaft of the device. When the arm is turned, the seal is compressed against the sides of the housing, creating a seal that prevents air, liquids, or other materials from entering or leaking out. The seal also prevents dirt, dust, and other particles from entering the device. What is a Cylinder Seal Kit? A cylinder seal kit is a set of seals that are used to seal the connection between the cylinder and the piston in an engine or other mechanical apparatus.

Minimum Order: 1 bags

Accessories for Hitachi excavators: EX60, EX60-2/3, EX60-5, EX100, EX100-2/3, EX100-5, EX120, EX120-2, EX120-5, EX150, EX150-5/160-5, EX200, EX200-2, EX200- 3, EX200-5/210-5, EX220, EX220-2/3, EX220-5, EX270, EX270-5, EX300, EX300-3, EX300-5, EX400, EX400-3/5, ZX60, ZX70, ZX120, ZX160, ZX160-3, ZX200, ZX200- 3/210-3, ZX230, ZX240-3, ZX270, ZX270-3, ZX330, ZX330-3/350-3/360-3, ZX450, ZX450-3/470-3, UH07-3, UH07-5/081, UH07-7/083(OLD), UH07-7/083(NEW). We provide lift cylinder seal kit, lift seal, seal kit lift cylinder, etc. For more about 4649049, contact us.

Minimum Order: 1 bags

The 707-99-67120 seal kit boom cylinder is a replacement kit that is compatible with the PC400-5 Excavator model. This kit contains various seals that are designed to seal the boom cylinder of the excavator, preventing hydraulic fluid from leaking out of the cylinder. A boom seal kit is essential for maintaining the efficiency and safety of the excavator, as hydraulic fluid leakage can lead to reduced performance, increased maintenance costs, and safety hazards.

Minimum Order: 1 bags

Cylinder hydraulic repair kit 14589129 EC210 BOOM is suitable for VOLVO 20 ton excavators commonly used on construction sites. VOLVO brand machines always pay attention to high quality, so the quality of the oil seals we match requires quality first, making high-quality products with the best cost performance.

Minimum Order: 1 bags

707-99-46270 Boom Cylinder Seal Kit Fits Komastu PC200-6 Excavator PC200-6 Repair kit/Seal kit is suitable use for 20- ton Komatsu excavator boom hydraulic cylinder. Complete parameters, stable performance, easy to replace, is a good companion for the cylinder. It's mainly including rod seal, buffer seal, piston seal, o-ring, wear rings, buffering ring, etc. Mainly for applications where the pressure alternates from one side of the seal to the other, such as pivots for rotating track rings, swivel joints, hose reels, and in machine tool hydraulics.)

Minimum Order: 1 bags

The seal kit manufacturer Sanping custom seal kits is one of the best partners in the construction machinery maintenance market. We use 1:1 real mechanical equipment for effective experimental detection, to ensure that each seal repair kit can effectively adapt to the work requirements of each hydraulic system and sealing system, and can provide customized services according to different equipment requirements, and effectively provide scientific and correct solutions for customers. How to Install a Seal Kit in a Hydraulic Cylinder? Different seals have different installation methods, common types: reciprocating motion seals and skeleton oil seals for rotation. The installation method of the skeleton oil seal for rotation: the first step, when taking the oil seal out of the warehouse, check whether there are dust and sand and other impurities on the surface of the oil seal and the lip, so as to avoid these substances from damaging the lip and shaft during the shaft movement, causing leakage. In the second step, for oil seals with more than two lips like TC, TA, TB, and TF, please fill the lip with grease, and for single-lip oil seals like SC, VC, and VB Apply grease to the end. The third step is to confirm that there is no foreign matter such as anti-rust oil or dust attached to the surface of the shaft and cavity. If there is any, please clean it. The fourth step is to confirm that there are no burrs on the surface of the shaft cavity and chamfers, so as to prevent these burrs from damaging the lip during installation. The fifth step is to assemble it into the cavity. It should be noted that the installation direction of the oil seal is that the sealing lip faces the sealing introduction side. The sixth step, when installing the oil seal, please use a special clamp to avoid the oil seal from tilting during installation. Installation method of hydraulic cylinder seals: 1. Receive a fixed number of oil seals. 2. From oil seal collection to assembly, it must be kept clean. 3. Before assembly, check the oil seal and measure whether the size of each part of the oil seal is consistent with the size of the shaft and cavity. Before installing the oil seal, first compare the size of the shaft diameter with the inner diameter of the oil seal, and they must be consistent. The inner size of the cavity should be suitable for the width of the outer diameter of the oil seal. Check whether the lip of the oil seal is damaged or deformed and whether the spring falls off or rusts. Prevent the oil seal from being placed flat during transportation, and being affected by external force extrusion and impact, which will damage its roundness. 4. Do a good job of machining inspection procedures before assembly. Measure whether the dimensions of the cavity and the shaft are correct. Especially inside chamfers. There must be no slope. The end face of the shaft and the cavity should be smooth and clean, the chamfer should be free of damage and burrs, and the assembly parts should be cleaned. There should be no burrs, sand, iron filings and other sundries at the shaft loading (chamfer) part, which will cause oil seal lip For irregular damage, it is recommended to use r-angle at the chamfering part. 5. In terms of operating skills, you can feel it with your hands to see if it is smooth and round. 6. Do not tear off the wrapping paper too early before the oil seal is installed to prevent debris from adhering to the surface of the oil seal and being brought into the work. 7. Before installation, an appropriate amount of lithium-based ester with molybdenum disulfide should be applied between the lips of the oil seal to prevent dry grinding of the lips and affect the interference of the lips when the shaft starts up instantaneously. ASAP, assemble. If the oil seal seat installed with the oil seal is not installed immediately, it is recommended to cover it with a cloth to prevent foreign matter from adhering to the oil seal. Hands or tools applied with lithium-based grease must be clean. 8. The oil seal should be installed flat, and there should be no tilting phenomenon. It is recommended to use hydraulic equipment or socket tools for installation. The pressure should not be too great, and the speed should be even and slow. 9. For the machine with the oil seal installed this time, mark it for easy tracking, and pay attention to the whole process. When the transition is installed on the stepped shaft, it is necessary to use a copper sheet to guide the transition or use a plastic tape to protect the transition, so as not to damage the oil seal. How to Select the Right o ring seal kit Size? When we choose seals, we must consider the following important factors: 1. Working pressure The pressure level and the length of the pressure cycle change have a great influence on the damage of the seal (such as extrusion). The higher the pressure, the greater the impact of other factors on the performance of the seal, such as temperature, speed, material of the seal, the gap between the piston and the cylinder, and the gap between the piston and the cylinder head. 2. Working temperature It is difficult to describe the maximum service temperature and the minimum service temperature of a sealing material because this is the result of a series of factors. For the working temperature of the piston and the piston rod are different, they should be selected differently. 3. Friction The friction between the seal and the sealing surface depends on many factors: surface roughness, surface characteristics, pressure, medium, temperature, seal material, seal type and movement speed. 4. Surface treatment Experience has shown that the characteristics of the surface of the cylinder piston and piston rod have a great influence on the life of the seal. Surface properties are often defined by the value of surface roughness Ra, which is the arithmetic mean of the absolute value of the surface shape away from the center line. However, these values cannot fully represent the influence of the surface condition on the seal, because even under the same roughness, different surface shape features can cause different degrees of seal wear on the seal.

Minimum Order: 1 bags

Jaw rock crusher are mainly used as primary crushers and secondary crushers in mining, building materials, infrastructure and other departments. According to the width of the feed port, it is divided into three types: large, medium and small. The machine with a feed port width greater than 600MM is a large machine, the one with a feed port width of 300-600MM is a medium-sized machine, and the one with a feed port width less than 300MM is a small machine. machine. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. Model:PE-200*350 Inlet Size:200*350mm Max.Feed Size:180mm Discharge Mouth Controllable Range:18-70mm Capacity: 3-10t/h Eccentric Shaft Speed:260r/min Motor:11kw Weight:1.5t Ove , rall Size:1000*870*990mm

Minimum Order: 1 bags

small rock crusher are mainly used as primary crushers and secondary crushers in mining, building materials, infrastructure and other departments. According to the width of the feed port, it is divided into three types: large, medium and small. The machine with a feed port width greater than 600MM is a large machine, the one with a feed port width of 300-600MM is a medium-sized machine, and the one with a feed port width less than 300MM is a small machine. machine. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. Model:PE-200*300 Inlet Size:200*300mm Max.Feed Size:180mm Discharge Mouth Controllable Range:15-50mm Capacity:2-6t/h Eccentric Shaft Speed:260r/min Motor:7.5kw Weight:1.2t Ov , erall Size:910*750*990mm

Minimum Order: 1 bags

Vertical Machining Center (VMC) – HG1275V is utilized primarily as a metal cutting machine that is useful in cutting or shaping steel, aluminum, and other hard materials in a precision formed or machined surface. Aside from these, it can be also be used for milling, boring, drilling, carving, engraving, tapping, thread cutting, and more operations. It is used in various machinery manufacturing industries with high precision and mass production requirements such as aerospace, automobile, handicrafts, mold making, military products, electronic and electrical, light and textile, etc. ITEM UNIT HG-1275V Travel of X Axis (Left-Right) mm 1200 Travel of Y Axis(Front-Back) mm 750 Travelof Z Axis(Up-Down) mm 600 Working Table Size(L*W) mm 1300×700 Max. Loading Weight kg 1000 Machine Floor Space (LxWxH) mm 3300×2500×2800 Machine Weight kg 8500 Vertical Machining Center (VMC) – HG1275V is a vertical milling machine with Tool Magazine and Fanuc / Mitsubishi CNC control system. It is used to mill 2D/3D shapes or patterns on various materials. It uses a rotating cylindrical tool, which is able to move along multiple axis, and can create a variety of shapes, slots and holes. In addition, the workpiece is often moved across the milling tool in different directions. HG Machinetools CNC Vertical Machining Center (VMC) is suitable for engraving, carving, milling, cutting and drilling most materials. So it is widely used in injection mould, ironware mould, metal molds and other molding industries. It is especially designed for batch milling molds, watch, eyeglasses, panel, brand, badge, outside surface’s sleeking, three-dimensional graphics and words. Besides that, it’s easy for this mill to form 2D or 3D relieves on a wide range of materials. HG Machinetools Vertical Machining Center machine body, worktable, column, milling head, etc. are all cast from high-strength cast iron, and undergo secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of processing characteristics and stability. Vertical Machining Center HG1275V Hgmachinetoolscom HG Machinetools A. Advantages of HG Machinetools’ Vertical Machining Center (VMC) – HG1275V 1. Machine body’s guide rail adopts a large span size design, and the column adopts an A-shaped structure design, which makes the machine tool rigid and thermally stable. 2. Taiwan imported high-performance spindle, optionally equipped with spindle oil cooling device to control spindle temperature rise and improve cutting accuracy. 3. All three feed axes are supported by Taiwan imported linear roller guides, ensuring the accuracy of three-axis positioning. 4. Both ends of the ball screw are pre stretched, increasing the transmission stiffness and eliminating the thermal deformation generated during rapid movement in advance. 5. Our Vertical Machining Center adopts a splash proof sheet metal fully protective design, which is beautiful and elegant, ensuring the personal safety of operators. B. Key Features of HG Machinetools’ Vertical Machining Center (VMC) – HG1275V a. Fully Enclosed Cover b. Controller Integrated c. Servo Motors d. Tool Magazine e. With FANUC control system f. Automatic Lubrication System g. HIWIN/PMI Roller Type Linear Guideway h. HIWIN/PMI Ball Screw i. FAG Bears j. Tool Magazine OKADA/Aimach C. Optional 1. Different Control System Optional 2. 4th-Axis / 5th-Axis Optional 3. Different Speed of Spindle Optional 4. Different Type of Tool Magazine Optional 5. Tools Capacity of Tool Magazine Optional D. Some Specific Configurations High Strength Castings The machine body, work table, column, milling head, etc. of HG Machinetools Vertical Machining Centers are all made of high-strength cast iron, and are subjected to secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of machining characteristics and stability. High Strength Castings HG Machinetools CNC Controller HG Machinetools CNC Control System Fanuc(Japan), Mitsubishi (Japan), Syntec (Taiwan,China) Optional Adoption of powerful and highly reliable high-speed microprocessor systems; Dynamic toolpath simulation, intelligent warning display, self-diagnostics and more; Multi-segment pre-reading control is particularly suitable for high-speed and large program processing; RS-232 serial transmission, memory card transmission, USB transmission, combined with DNC standard processing configuration, facilitates the transmission of large- capacity programs and online processing, with better processing efficiency and effectiveness. Spindle From Taiwan, China Speed 6000/8000/10000/12000 RPM Optional The spindle and motor belt are designed with a 1:1 connection, and the main motor is a low inertia motor with a speed of 10000 rpm. It is a wise choice for high precision, high rigidity and heavy cutting situations; if there is a higher requirement for surface smoothness, a 12000 rpm direct spindle can also be selected. Spindle HG Machinetools Cooling system HG Machinetools Cooling System HG Machine is equipped with a cooling system, and the combination of a large flow pump and many nozzles can solve the machining problems of tool overheating and workpiece deformation due to machining heat. E. Some Components of Our CNC Machining Centers CNC Control System Fanuc Tool Magazine Linear Guideway HIWIN Lubricating oil system Manual Pulse Generator Heat Exchanger

Minimum Order: 1 bags

Vertical Machining Center – HG1160V can manufacture the high quality parts to a higher level of detail and better surface finish. The core function of CNC Milling machine involves mechanically cutting away at a workpiece into the desired shape. It is engineered to mass-produce many components from various materials, but with minimum human input needed to complete the manufacturing or production. ITEM UNIT HG-1160V Travel of X Axis (Left-Right) mm 1100 Travel of Y Axis(Front-Back) mm 600 Travelof Z Axis(Up-Down) mm 600 Working Table Size(L*W) mm 1200×600 Max. Loading Weight kg 800 Machine Floor Space (LxWxH) mm 3100×2450×2800 Machine Weight kg 7000 Vertical Machining Center – HG1160V is an automatic power mill with CNC (Computer Numerical Controlled) controller. It is used to mill 2D/3D shapes or patterns on various materials. It uses a rotating cylindrical tool, which is able to move along multiple axis, and can create a variety of shapes, slots and holes. In addition, the workpiece is often moved across the milling tool in different directions. HG Machinetools CNC Vertical Machining Center (VMC) is suitable for engraving, carving, milling, cutting and drilling most materials. So it is widely used in injection mould, ironware mould, metal molds and other molding industries. It is especially designed for batch milling molds, watch, eyeglasses, panel, brand, badge, outside surface’s sleeking, three-dimensional graphics and words. Besides that, it’s easy for this mill to form 2D or 3D relieves on a wide range of materials. HG Machinetools Vertical Machining Center machine body, worktable, column, milling head, etc. are all cast from high-strength cast iron, and undergo secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of processing characteristics and stability. Vertical Machining Center HG1160V HG MachinetoolsA. Advantages of HG Machinetools’ Vertical Machining Center – HG1160V 1. Machine body’s guide rail adopts a large span size design, and the column adopts an A-shaped structure design, which makes the machine tool rigid and thermally stable. 2. Taiwan imported high-performance spindle, optionally equipped with spindle oil cooling device to control spindle temperature rise and improve cutting accuracy. 3. All three feed axes are supported by Taiwan imported linear roller guides, ensuring the accuracy of three-axis positioning. 4. Both ends of the ball screw are pre stretched, increasing the transmission stiffness and eliminating the thermal deformation generated during rapid movement in advance. 5. Our Vertical Machining Center adopts a splash proof sheet metal fully protective design, which is beautiful and elegant, ensuring the personal safety of operators. B. Key Features of HG Machinetools’ Vertical Machining Center – HG1160V a. Fully Enclosed Cover b. Controller Integrated c. Servo Motors d. Tool Magazine e. With FANUC control system f. Automatic Lubrication System g. HIWIN/PMI Roller Type Linear Guideway h. HIWIN/PMI Ball Screw i. FAG Bears j. Tool Magazine OKADA/Aimach C. Optional 1. Different Control System Optional 2. 4th-Axis / 5th-Axis Optional 3. Different Speed of Spindle Optional 4. Different Type of Tool Magazine Optional 5. Tools Capacity of Tool Magazine Optional D. Some Specific Configurations High Strength Castings The machine body, work table, column, milling head, etc. of HG Machinetools Vertical Machining Centers are all made of high-strength cast iron, and are subjected to secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of machining characteristics and stability. High Strength Castings HG Machinetools CNC Controller HG Machinetools CNC Control System Fanuc(Japan), Mitsubishi (Japan), Syntec (Taiwan,China) Optional Adoption of powerful and highly reliable high-speed microprocessor systems; Dynamic toolpath simulation, intelligent warning display, self-diagnostics and more; Multi-segment pre-reading control is particularly suitable for high-speed and large program processing; RS-232 serial transmission, memory card transmission, USB transmission, combined with DNC standard processing configuration, facilitates the transmission of large- capacity programs and online processing, with better processing efficiency and effectiveness. Spindle From Taiwan, China Speed 6000/8000/10000/12000 RPM Optional The spindle and motor belt are designed with a 1:1 connection, and the main motor is a low inertia motor with a speed of 10000 rpm. It is a wise choice for high precision, high rigidity and heavy cutting situations; if there is a higher requirement for surface smoothness, a 12000 rpm direct spindle can also be selected. Spindle HG Machinetools Cooling system HG Machinetools Cooling System HG Machine is equipped with a cooling system, and the combination of a large flow pump and many nozzles can solve the machining problems of tool overheating and workpiece deformation due to machining heat. E. Some Components of Our CNC Machining Centers CNC Control System Fanuc Tool Magazine Linear Guideway HIWIN Lubricating oil system Manual Pulse Generator Heat Exchanger

Minimum Order: 1 bags

Vertical Machining Center (VMC) – HG855V is an automatic power vertical milling machine with CNC (Computer Numerical Controlled) control and tool magazine. It is used to mill 2D/3D shapes or patterns on various materials. It uses a rotating cylindrical tool that can move along multiple axes and create a variety of shapes, slots and holes. In addition, the workpiece is often moved across the milling tool in different directions. HG Machinetools CNC Vertical Machining Center (VMC) is suitable for engraving, carving, milling, cutting and drilling most materials. Therefore, it is widely used in injection mold, hardware mold, metal mold and other molding industries. It is especially designed for batch milling molds, watch, eyeglasses, panel, brand, badge, outer surface’s sleeking, three-dimensional graphics and words. Besides, it’s easy for this mill to form 2D or 3D reliefs on a wide range of materials. HG Machinetools Vertical Machining Center machine body, work table, column, milling head, etc. are all made of high-strength cast iron, and undergo secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of processing characteristics and stability. 855V HG Machinetools A. Advantages of HG Machinetools’ Vertical Machining Center (VMC)- HG855V 1. The guide rail of the machine body adopts a large span design, and the column adopts an A-shaped structure design, which makes the machine tool rigid and thermally stable. 2. Taiwan imported high performance spindle, optionally equipped with spindle oil cooling device to control spindle temperature rise and improve cutting accuracy. 3. All three feed axes are supported by Taiwan-imported linear roller guides, ensuring the accuracy of three-axis positioning. 4. Both ends of the ball screw are pre-stretched, which increases the rigidity of the transmission and eliminates the thermal deformation caused by rapid motion in advance. 5. Our vertical machining center adopts a splash-proof sheet metal fully protective design, which is beautiful and elegant, ensuring the personal safety of operators. B. Key Features of HG Machinetools’ Vertical Machining Center (VMC) – HG855V a. Fully Enclosed Cover b. Integrated Controller c. Servo Motors d. Tool Magazine e. With FANUC control system f. Automatic Lubrication System g. HIWIN/PMI Roller Type Linear Guide h. HIWIN/PMI Ball Screw i. FAG Bears j. OKADA/Aimach Tool Magazine C. Optional 1. Different Control System Optional 2. 4th-Axis / 5th-Axis Optional 3. Different Speed of Spindle Optional 4. Different Type of Tool Magazine Optional 5. Tools Capacity of Tool Magazine Optional D. Some Specific Configurations High Strength Castings The machine body, work table, column, milling head, etc. of HG Machinetools Vertical Machining Centers are all made of high-strength cast iron, and are subjected to secondary tempering and aging treatment to optimize the reinforcement structure, making the overall performance more in line with the requirements of machining characteristics and stability. High Strength Castings HG Machinetools CNC Controller HG Machinetools CNC Control System Fanuc(Japan), Mitsubishi (Japan), Syntec (Taiwan,China) Optional Adoption of powerful and highly reliable high-speed microprocessor systems; Dynamic toolpath simulation, intelligent warning display, self-diagnostics and more; Multi-segment pre-reading control is particularly suitable for high-speed and large program processing; RS-232 serial transmission, memory card transmission, USB transmission, combined with DNC standard processing configuration, facilitates the transmission of large- capacity programs and online processing, with better processing efficiency and effectiveness. Spindle From Taiwan, China Speed 6000/8000/10000/12000 RPM Optional The spindle and motor belt are designed with a 1:1 connection, and the main motor is a low inertia motor with a speed of 10000 rpm. It is a wise choice for high precision, high rigidity and heavy cutting situations; if there is a higher requirement for surface smoothness, a 12000 rpm direct spindle can also be selected. Spindle HG Machinetools Cooling system HG Machinetools Cooling System HG Machine is equipped with a cooling system, and the combination of a large flow pump and many nozzles can solve the machining problems of tool overheating and workpiece deformation due to machining heat. E. Some Components of Our CNC Machining Centers CNC Control System Fanuc Tool Magazine Linear Guideway HIWIN Lubricating oil system Manual Pulse Generator Heat Exchanger ITEM UNIT HG-850V HG-855V HG-1160V HG-1275V HG-1370V HG-1580V Travel of X Axis (Left-Right) mm 800 800 1100 1200 1300 1500 Travel of Y Axis(Front-Back) mm 500 550 600 750 700 800 Travelof Z Axis(Up-Down) mm 500 550 600 600 700 700 Distance from workbench to spindle end face mm 150-650 150-700 120-720 120-720 80-780 150-850 Distance from the front end of column to the center of Spindle mm 600 643 650 775 810 925 Working Table Size(L*W) mm 1000×500 1000×550 1200×600 1300×700 1400×700 1600×800 Max. Loading Weight kg 400 500 800 1000 1600 1600 Working Table T-Slot mm 18T×90×5 18T×90×5 18T×100×5 18T×100×6 18T×110×5 18T×110×7 X/Y/Z Axis Rapid Feeding Speed m/min 48×48×48 48×48×48 36×36×36 36×36×36 30×30×30 30×30×30 Power of X/Y/Z Axis According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System Roller Guideway of X/Y/Z X:35(4Rollers) Y:35(4Rollers) Z:35(4Rollers) X:35(4Rollers) Y:45(4Rollers) Z:45(6Rollers) X:45(6Rollers) Y:45(4Rollers) Z:45(6Rollers) X:45(6Rollers) Y:55(4Rollers) Z:45(6Rollers) X:45(6Rollers) Y:45(8Rollers) Z:45(6Rollers) X:55(6Rollers) Y:45(4Rollers) Z:55(6Rollers) , Ball Screw of X/Y/Z 4016 4016 4012 4012 4512 5010 Speed of Spindle rpm 8000/10000/12000 8000/10000/12000 8000/10000/12000 6000/8000/10000/12000 6000/8000/10000/12000 6000/8000/10000/12000 Spindle Taper BT40 BT40 BT40 BT40/BT50 BT40/BT50 BT40/BT50 Transmission Type mm Belt／Direct Connect Belt／Direct Connect Belt／Direct Connect Belt／Direct Connect Belt／Direct Connect Belt／ Direct Connect Spindle Motor kW According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System According to the Control System Position accuracy mm ±0.003/300 ±0.003/300 ±0.003/300 ±0.005/300 ±0.005/300 ±0.005/300 Repeatability position accuracy mm ±0.003/300 ±0.003/300 ±0.003/300 ±0.003/300 ±0.003/300 ±0.003/300 Tool Magazine (Tools Qty) T BT40-24 BT40-24 BT40-24 BT40-24T/BT50-24T BT40-24T/BT50-24T BT40-24T/BT50-24T Control System Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Syntec/Mitsubish/Fanuc Machine Floor Space (LxWxH) mm 2700×2400×2500 2700×2400×2600 3100×2450×2800 3300×2500×2800 3600×2800×2800 4400×3200×3000 Pressure Requirement kg/cm² 6-7 6-7 6-7 6-7 6-7 6-7 Power Supply Kva 20 20 20 25 30 35 Edit Machine Weight kg 5200 5500 7000 8500 10000 13000

Minimum Order: 1 bags

Our this machine is used to produce the Spring,the capacity can reach 70-90pcs/min.

Minimum Order: 1 bags

Steel shots in the lower part of the separation box goes into the blasting components through feeding tube and driven by the motor. The high-speed rotating shot will be thrown and stroke against the surface of workpieces at the speed of 80m/s. And thus carry out clean-up operation. Under the effect of negative pressure, the shot abrasive and dust will be back into sand separation box where the shot, dust and impurities will be separated completely. Good shot materia into the blast is expected to continue to use. Dust and impurities wating to be processed have been filtered to the airtight dust box.

Minimum Order: 1 bags

The handheld automatic nailing machine is composed of the host (automatic arranging feeding device) and the nailing gun assembly. The working principle is to automatically arrange and separate the pull rivet by the vibration device, and use the compressed air as the power to automatically transport the pull rivet to the lunch gun's mouth through the pipeline. Flying effects automatic nailing machine can upgrade the traditional handmade nailing operation to automation operations. The combined robotic arm use can achieve unmanned operations, which improves work efficiency.

Minimum Order: 1 bags