Minerals & Metals

The Pedestal Boom Rockbreaker of Yuanzhengxing can effectively improve the productivity and profitability of mines and sand and gravel plants by reducing the downtime caused by material blockage in crushers. Moreover, the power source of Yuan Zhengxing's Pedestal Boom Rockbreaker is electricity, which is energy-saving and environmentally friendly, does not produce pollution, and greatly reduces the cost of use, providing assistance for the construction of green, environmentally friendly and intelligent mines. More importantly, the installation of the Yuan Zheng Xing fixed robotic arm in the mine has completely released manpower and ensured the safety of workers, improving the safety factor of the mine.

Minimum Order: 1 bags

Deodorization equipment is air purification equipment used to deodorize and remove odors, and is commonly used in factories, workshops, sewage stations, garbage factories and so on. The structure of deodorization equipment is simple, and has the characteristics of low energy consumption, high purification efficiency and wide range of application. For the treatment of waste gas, more liquid absorption method of treatment; wastewater treatment, more ion deodorization equipment; garbage recycling station treatment, more use of spray deodorization equipment. Nowadays, the uncontrolled emission of industrial flue gas makes the global atmospheric environment deteriorating, and the harm of acid rain has attracted the attention of all countries. The acidification of the atmosphere due to pollution has led to the destruction of the ecological environment and the frequent occurrence of major disasters, causing great losses to mankind. Therefore, it is imperative to choose an economical and feasible deodorizing equipment. Brief introduction Deodorization equipment has a simple structure, low energy consumption, high purification efficiency and a wide range of characteristics, the exhaust gas is introduced into the purification tower by the air duct, through the packing layer, the exhaust gas and sodium hydroxide solution for the gas-liquid two- phase full contact absorption and neutralization reaction, the exhaust gas is purified, and then by the mist elimination plate dehydration and mist elimination by the fan discharged into the atmosphere. The absorbing liquid is pressurized by water pump at the bottom of the tower and then sprayed at the top of the tower, and finally flows back to the bottom of the tower for recycling. Structure The Biological deodorization equipment consists of a round tower, connected by flanges in sections. The specific structure consists of air inlet section, pressure chamber, bubble liquid storage tank, two-stage spray section, cyclone plate, out of the wind cone cap and other components. Its characteristics are: easy to make, easy to install and maintain, high strength, small footprint. Exhaust gas is pressed into the inner cylinder of the purification tower by the fan to form a pressure chamber, and then by the pressure chamber are assigned to each bubble tube, the exhaust gas through the bubble into the storage tank absorption and neutralization of the liquid in the bubble, so that the gas- liquid full contact to improve the purification efficiency. Then into the spray layer, spray form using double packing, two-stage spray, so that the gas-liquid full contact, improve the purification efficiency. The tower is equipped with a glass fiber reinforced plastic centrifugal fan and plastic water pump or stainless steel water pump. When the handling air volume is more than 10000 cubic meters, two water pumps can meet the design requirements. https://www.tx-frp-enviroequip.co , m/

A Crossflow Cooling Tower is a device that cools water. Water flows vertically from the upper part of the tower, and air flows horizontally through the spray filler, and the air flow is orthogonal to the water flow of the cooling tower. According to the water quality of cooling water is divided into: open tower and closed tower. According to the noise level is divided into: ordinary type (P), low noise type (D), ultra-low noise type (C), industrial type (G). According to the water quality of cooling water is divided into: open tower and closed tower According to the noise level is divided into: ordinary type (P), low noise type (D), ultra-low noise type (C), industrial type (G).   Advantages: 1) Small water pressure head, less power consumption. 2) Low noise, wider use occasions. 3) Less water loss, more economical and more sustainable. 4) The water distribution method is reasonable, the water distribution system with gravity natural fall is adopted, the loose water hole is not easy to plug, and the water distribution is uniform, which maximizes the performance of the filler. 5) After module combination, efficiency remains unchanged. And the reverse flow tower is less efficient. Note: It is compared with countercurrent tower.

Our counter flow cooling towers are engineered to minimize pump head requirements and are less susceptible to icing in cold weather conditions, ensuring year-round efficiency and reliability. With a range of cell sizes and customizable components, frp cooling towers are tailored to meet the specific demands of various industries.   Types of counter flow cooling towers According to the noise level: ordinary type (P), low noise type (D), ultra-low noise type (C), industrial type (G) According to the structure of the tower, there are square towers and round cooling towers. Countercurrent cooling tower is the water in the tower filling, the water in the tower from top to bottom, the air in the tower from bottom to top, this is the counter current cooling tower.   Three stages of cooling tower: 1. The water distributor to the tower packing top, because the water temperature is relatively high, can continue to transfer heat to the air. 2. The filling water at the top of the counterflow cooling tower is exchanged with the hot gas at the bottom, commonly known as the countercurrent section. 3. When the filler reaches the bottom of the sump, the hot water will be cooled into cold water, and the counter flow type cooling tower is more efficient than the cross-flow cooling tower.   Advantages of counter flow cooling tower 1. The whole counter flow cooling tower design is simple, the water distribution system is smooth, the whole water distribution process does not need special requirements, and it is not easy to plug. Water filling is used to prevent aging and moisture reflux. In places where the temperature is relatively low, it is easy to take anti-freezing measures. And can design multiple cooling towers to be used at the same time.   2. The counter flow FRP cooling tower operation is relatively simple. The production cost of the entire equipment can be controlled, and it is usually used in some large cooling circulation water.   Counter flow cooling tower applications • Medical Plants: Our counterflow cooling towers for sale provide the precise temperature control needed for sensitive medical environments. • Nuclear Power Stations: Designed for the high safety and efficiency standards of nuclear facilities. • Chemical and Oil Refineries: Capable of handling the demanding conditions and impurities found in these industries. • Thermal Power Plants: Optimized for the heat transfer requirements of thermal power generation. • Small Factory Industries: Suitable for smaller operations where space and efficiency are critical. • Boiler Plants: Efficiently managing heat dissipation for boiler systems. • Furnace Plants: Supporting the cooling needs of high-temperature furnace operations.

Engineered to provide exceptional durability and high thermal efficiency in industrial cooling applications. These FRP cooling towers are crafted from pultruded fiberglass, a material known for its superior strength and resistance to harsh environments, making pultruded frp cooling tower a customizable and eco-friendly choice for various industries.   Pultruded frp cooling tower features • Exceptional Durability Pultruded cooling towers are built to withstand the test of time, with high resistance to corrosion, chemicals, UV radiation, and environmental factors, ensuring a longer operational lifespan and minimal maintenance. • Corrosion Resistance Unlike traditional cooling solutions prone to rust and wear, pultruded FRP towers are unaffected by corrosive elements, making them perfect for industries such as chemical processing and power generation. • Consistent Performance The inherent qualities of pultruded FRP ensure consistent cooling performance, crucial for maintaining uninterrupted industrial processes. • Wide Application Range Our pultruded frp cooling towers for sale are versatile, serving a broad spectrum of industries including manufacturing, power plants, chemical processing, steel, and sugar industries, among others.   Molded Cooling Tower Working principle After the dry (low enthalpy value) air is pumped by the fan, it enters the cooling tower from the inlet air network; The high temperature water molecules with high partial pressure of saturated steam flow to the air with low pressure, and the wet and hot water (high enthalpy value) is poured into the tower by the self-seeded water system. When water droplets and air contact, on the one hand due to the direct heat transfer of air and not, on the other hand due to the pressure difference between the surface of the water steam and the air, under the action of pressure to produce evaporation phenomenon, to the evaporation of latent heat, the heat in the water to take away the evaporation of heat transfer, so as to achieve the purpose of cooling tower.   Used in air conditioning cooling system, refrigeration series, injection molding, leather, foaming, power generation, steam turbine, aluminum processing equipment Design meteorological conditions of FRP molded cooling tower Atmospheric pressure: P =99.4×103 kPa Dry bulb temperature: θ =31.5℃ Wet bulb temperature: τ =28℃ (27℃ for square and ordinary type)   Tengxiao Cooling tower design parameters 1. Standard type: incoming tower water temperature 37℃, outgoing tower water temperature 32℃ 2. Medium temperature type: Entering the tower water temperature 43℃, out of the tower water temperature 33℃ 3. High temperature type: entering the tower water temperature of 60℃, out of the tower water temperature of 35℃ 4. Common type: the water temperature into the tower is 37℃, the water temperature out of the tower is 32℃ 5.Large tower: the water temperature into the tower is 42℃, the water temperature out of the tower is 32℃ in industry, a kind of equipment to cool hot water. Water is transported to the tower to make heat exchange between water and air, or heat and mass exchange, in order to achieve the purpose of reducing the water temperature.   Pultruded frp cooling tower applications The waste heat generated in industrial production or refrigeration process is generally guided away by cooling water. The role of FRP molded cooling tower is to carry out heat exchange between the cooling water with waste heat in the tower and the air, so that the waste heat is transmitted to the air and dispersed into the atmosphere. For example, in a thermal power plant, the boiler heats water into high temperature and high pressure steam, pushes the turbine to do work to make the generator generate electricity, and the waste steam after the steam turbine does work is discharged into the condenser, and the cooling water is exchanged to condense into water, and then the water is pumped back to the boiler for recycling. In this process, the waste heat of the lack of steam is transferred to the cooling water, which increases the temperature of the water, and the cooling water with the waste heat is transferred to the air in the cooling tower and discharged into the atmospheric environment from the wind duct.   Application range: Mainly used in air conditioning cooling system, freezing series, injection molding, leather, foaming, power generation, steam turbine, aluminum profile processing, air compressor, industrial water cooling and other fields, the most used for air conditioning cooling, freezing, plastic chemical industry.

Round countercurrent glass steel cooling tower, using the "bottle" shape design, the whole FRP cooling tower assembly is convenient, durable, light and delicate, cooling effect is good, made of high-quality glass steel, the surface gelcoat color contains light stabilizer, with anti-ultraviolet irradiation, uniform color, can maintain year-round do not fade, do not aging. Round cooling towers features: • Round cooling tower, using "bottle" shape design, minimal wind resistance. • The whole frp round cooling tower is easy to assemble, strong and durable, light and delicate, and has good cooling effect. • The circular countercurrent cooling tower body is made of high quality glass steel, and the surface gelcoat is made of imported raw materials. Its color contains light stabilizer, which is resistant to ultraviolet radiation, uniform and bright color, and can be maintained all year round without fading and aging. • The transmission parts adopt counter flow cooling tower special fan and motor. It has the characteristics of stable operation, reasonable matching, large air volume, low energy consumption and low noise. • The water distribution device is composed of fiberglass cloth water pipe, nylon water distribution device and cast copper inner core, which automatically rotates the water distribution through the water reaction force. The water distribution device has small pressure head loss, low water demand and uniform water distribution. • The packing has been tested by Shandong Thermal Engineering Institute, and has the characteristics of long life, high cooling efficiency, uniform water redistribution, small wind resistance, good hydrophilicity and high temperature resistance. • The steel component adopts advanced hot-dip galvanizing process and is coated with high-performance anticorrosive paint to ensure its service life.   Round cooling towers applications: Countercurrent cooling tower chassis can be used as a water collection tray, and equipped with manual water supply, automatic water supply, sewage, overflow and other devices, can be used as a closed cycle pool, no need to set up another pool. The silent series round cooling towers adopt a unique noise reduction technology, and the noise index is far lower than the specified value in the national standard. Circular counter flow cooling tower has good stability and strength, can withstand Richter magnitude 8 earthquake and 12 typhoon attack, round type cooling tower for sale is suitable for small and medium-sized water, multi-water dispersed arrangement of circulating cooling water system use, the arrangement is very flexible and convenient.   Company Service As a professional round cooling tower manufacturer, Tengxiao Environmental Protection Equipment is committed to providing not only high-quality products but also exceptional service. We offer: • Customized Solutions: Tailored to meet the specific requirements of your projects, ensuring optimal performance. • Quality Assurance: Rigorous quality control over every component to guarantee reliability and efficiency. • Cost-Effective Solutions: Delivering high-performance cooling towers at competitive prices, ensuring value for money. • After-Sales Support: Dedicated customer service and technical support to assist with any issues that may arise.

Hot Sale 3 Ton Mining Trolley Wire Locomotive Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

The working principle of the pedestal rock breaker boom system: A pedestal rock breaker boom system uses a hydraulic hammer as a crushing tool to convert hydraulic energy into mechanical energy by changing the oil circuit, causing the piston rod to move up and down at high speed, and then hammering the drill rod. The drill rod floats inside the body of the hydraulic hammer, and the tip of the drill rod points towards the crushed material - ore. In this way, the ore is crushed by the impact force of the hammer head and drill rod, completing the crushing task. In order to quickly capture the force point and impact direction of the broken object. By using a planar variable amplitude mechanism consisting of a large arm, two arms, crank, connecting rod, and rotating hammer, as well as a rotary mechanism, a hammer with five degrees of freedom is formed, which can quickly capture the striking object, striking point, and striking direction in three degrees of space. This planar mechanism can greatly improve the efficiency of crushing work.

Minimum Order: 1 bags

Versatile Hydraulics: For precise control in any operation. Durable Design: Built to last with high-strength manganese steel. User-Friendly Controls: Easy operation for extended periods. Customizable Sizes: Fits excavators from 6 to 24 tons. Value-Driven: High performance at an affordable cost. Excavator Metal Scrap attachments are specialized tools designed to handle, sort, and process large volumes of metal scrap efficiently. These heavy-duty attachments are engineered to withstand the rigorous demands of scrap yards, metal recycling facilities, demolition projects, and industrial waste management. By integrating advanced technology and robust materials, these attachments help improve productivity and reduce operational costs. Tiannuo Machinery, a leading manufacturer and supplier of metal scrap attachments. With over 10 years of experience in the industry, we specialize in providing high-quality, durable, and customizable solutions for the Excavator Metal Scrap recycling and waste management sectors.

Minimum Order: 1 bags

WSFIVIN’s K-LATH is a 16/17 Gauge 2" x 2" welded wire lath for reinforcement of stucco, masonry, and cultured stone. Excellent alternative to 3.4 metal lath. Rigid 1/4" furring for consistent, proper embedment Redline Fastening Guideline on suction paper to ensure quick, easy and correct fastener placement Available with Kwik Track double wire for easy attachment of fasteners Paper backed for quick installation: Grade D, 60 Minute and double paper Stucco-Rite HD - includes stiffening wires for heavier loads and wider stud spacing

*Ideal for industrial and commercial screening applications for vents, spark arrestors, finger guards, baskets, and racks *Precision welded with uniform spacing *Flush cut edges for ease of use *Galvanized Hardware cloth can help keep form digging up through the grass. Install the hardware cloth in the middle of the base fill * Special specifications can support customization.

The J BEAD is recommended as a divider at the edge between plaster and other dissimilar materials. When used in conjunction with metal lath, the corner J BEAD is installed under the lath.*The J BEAD short flange is used under regular corner reinforcement conditions where an expanded flange is not required. Available with or without weep holes. Also available in zinc alloy.*Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives. The selection of the appropriate type of material for accessories shall be determined by the surrounding climatic and environmental conditions such as salt air, high humidity, and industrial pollution.

WSFIVIN’ s Expanded Corner Bead is designed to provide strong corner reinforcement for conventional plaster applications. A solid metal nose provides a straight, rigid ground and the 2-5/8″ flanges can be easily flexed over irregular, uneven surfaces. Easily install using standard industry practice. Plaster keys near solid nose provide reinforcement where needed most to ensure straight corners.

WSFIVIN’ s Self-Furring V-Groove Diamond Mesh Lath is manufactured with approximately ¼” deep grooves and 5 grooves per sheet. This product is used over surfaces like concrete, cement board, column fireproofing, masonry and replastering over old surfaces. V-Grooves ensure thorough plaster penetration and strong mechanical bond. V-Groove Lath is easily shaped for curved or contoured surface, mainta