Minerals & Metals

Strainer demister pads are used to ensure that liquids and gases flow freely through the strainer. This filter element is made from mesh materials designed with a specific pore size and mesh opening size. Depending on the application, the mesh material ranges from steel, stainless steel, PVC, Polypropylene to other synthetic materials. Strainer demisters provide a higher level of removal efficiency than traditional demisters, including removing smaller particles from the process stream. The pad is designed with a high collection efficiency for droplet and aerosol removal, even when the process gas carries entrained liquid particles. This type of pad is particularly suitable for aggressive service applications. Applications Strainer demister pads are usually used in high-temperature and pressure applications, such as refineries, power stations, chemical plants, fertilizer manufacturing and petrochemical plants. They are also used in processes including amines, LPG, steam and boilers, cryogenics, air separation, and other related operations.

Vessel demisters are devices primarily used in high-pressure gas vessels and towers in power plants, chemical plants, refineries, and various other industrial processes. Vessel demister pads are an integral part of any process vessel, storage tank, and reactor system. Their unique design enables them to capture and contain the entrained droplets in the vapor stream and reduce contaminated vapors for clean air release. Material The material used in vessel demisters is typically constructed of wire mesh, polymers, metal, elements. Commonly used materials include polypropylene, polyethylene, stainless steel, zinc-plated steel, brass, and PVC. These materials can be selected based on their chemical, temperature, and corrosion resistance capabilities. Sizes and Shapes Vessel demister pads come in a wide range of sizes and configurations, including round pads, wedge wire pads, and various other shapes. The size and shape of a vessel demister usually depend on the size and shape of the equipment it will be installed in. Generally, the demisters are designed to fit within the vessel or tower that they are intended for. The length and width of a vessel demister depend on the size and configuration of the job.

Distiller Demister Pads are an essential component of distillation columns used to reduce the amount of entrained liquids and droplet entrainment in the filtration system. Sizes and Materials Distiller mesh demisters are available in a range of sizes, colors, materials, and shapes according to the application and the pressure drop desired in the system. The size also influences the contact surface area, efficiency, and overall performance of the pad. These pads typically range from 3/8" up to 48". The width can range from 12" up to 60" depending on the required surface area. Colors most offer standard grey, black, and white for easy system identification. The materials used for distiller demister pads include metallic stainless steel, fiberglass, polypropylene, and other synthetic fibers. Each material has its own distinct characteristics such as flexibility, chemical resistance, durability, and permeability. The length of the pad can vary depending on the application and desired shape. It is important to have an even distribution of mesh fibers throughout the entire length of the pad, which provides uniformity and better performance when compared to pads with irregular fiber distribution.

A baffled type mist eliminator is a device designed to reduce the amount of mist, droplets, aerosols, and other contaminants in gas or liquid streams. It consists of a series of baffles or plates arranged in a specific pattern to facilitate the separation of droplets from the gas stream. Baffled type mist eliminators are usually made from plastic, metal, or ceramic materials and can be manufactured in a variety of shapes and sizes. The production process of a baffled type mist eliminator starts with designing and fabricating the device. This involves selecting the materials and manufacturing the components according to the design specifications. Next, the device is assembled, tested, and installed in the process line. The device is then monitored for proper operation and any necessary adjustments are made. Baffled type mist eliminators can be made from a variety of materials, such as metals, plastics, and ceramics. Metals are typically used for larger, more complex designs, while plastics and ceramics are usually used in smaller devices. The profile of the device will depend on the material and the required performance. The number of baffles and their size and shape can also affect the performance of the device.

Mist separators are used to remove mist, aerosols, and other contaminants from air or gas streams. Supplied of various forms, materials, and sizes to fit the specific application needs. Mist separators are available in a variety of forms and sizes, depending on their application. Common forms include vertical, horizontal, and cylindrical designs. Materials used for mist separators may include stainless steel, plastic, fiberglass, and other metals. Mist Separators of Cylindrical Shape: Top inlet and a plate-type collector at the bottom which acts as an outlet. This assembly is usually fitted with a filter element to collect the mist particles before they reach the outlet. Primary application of mist separators is in industrial processes such as oil refining, petrochemical and chemical production, power plants, and the food and beverage industry. They are also increasingly being used in commercial and residential environments for treating polluted air. Mist separators can be used for both liquid and gaseous pollutants, and may include additional devices such as cyclones, centrifuges, electrostatic precipitators, and filters.

The triangular bending guardrail net is made of high-quality Q 235 low carbon cold drawn steel wire, cold drawn low carbon steel wire and low carbon steel wire. And carry out the corresponding anti-corrosion treatment: electric galvanizing, hot dip galvanizing, spraying, dipping and stainless steel wire, etc. (generally using dipping treatment). Triangular bending guardrail net features: woven welding bending, commonly used peach column connection is also called peach column guardrail net. It has the characteristics of beautiful and durable mesh structure, wide vision, variety of colors, high strength, good steel and beautiful shape. It plays both the role of guardrail and beautification. The triangular bending guardrail net is made of high-quality Q 235 low carbon cold drawn steel wire, cold drawn low carbon steel wire and low carbon steel wire. And carry out the corresponding anti-corrosion treatment: electric galvanizing, hot dip galvanizing, spraying, dipping and stainless steel wire, etc. (generally using dipping treatment). Triangular bending guardrail net features: woven welding bending, commonly used peach column connection is also called peach column guardrail net.

PRODUCT DESCRIPTION 430 stainless steel sheet metal is a kind of components and parts made of 430 stainless steel sheet processing, with good mechanical properties and corrosion resistance, suitable for the manufacture of various structural parts, decorative parts, electrical equipment, furniture, etc.. Compared with 304 stainless steel sheet metal, 430 stainless steel sheet metal has higher hardness and strength, but its corrosion resistance is relatively poor. In addition, 430 stainless steel sheet metal is easy to process and relatively low cost, but the surface quality is not as good as 304 stainless steel sheet metal, which is generally used in some applications with less stringent requirements. At present can provide services including CNC bending, shearing, edge planing, leveling, rounding, steel flattening, deburring, etc. When customers need metal fittings with complex structure and size, they only need to provide clear drawings or detailed descriptions about size, and then we can create them with the help of excellent engineers and various equipment.

Workshop isolation net is a kind of movable guardrail net product used for temporary isolation of workshop area. Can choose bilateral type, frame type, bending type guardrail net. The product has the advantages of simple installation, convenient removal, high protection strength, good rigidity, beautiful appearance, broad vision, bright and relaxed feeling. Workshop isolation net after dipping plastic, galvanized anti-corrosion treatment with anti-corrosion, anti-aging characteristics. Its products are mainly used indoors, there is no light, so the service life is longer than other guardrail products. Can be processed according to customer requirements. Our company stock supply height of 1.2 meters, 1.5 meters, 1.8 meters and 2 meters, 2.5 meters, 3 meters, 4 meters. The selected metal raw materials are relatively simple to be disturbed by external factors, so the health condition of the workshop is very important, and if the dust is relatively large, we should pay attention not to let the dust fly. If the dust falls on the workshop, it should be cleaned in time. Under normal circumstances, the service life of the workshop barrier net is relatively long. However, if you do not pay attention to the maintenance of its original life when it is usually used, it is difficult to reach. So, about this kind of workshop equipment to carry out reasonable maintenance? The selected metal raw materials are relatively simple to be disturbed by external factors, so the health condition of the workshop is very important, and if the dust is relatively large, we should pay attention not to let the dust fly. If the dust falls on the workshop, it should be cleaned in time, because the impurities in the dust will make the paint outside the net fall, which will make the net wire corroded faster. If it is damaged, it is necessary to replace the new metal material and weld it well in time to avoid the gradual expansion of the scale of the damaged place, thus affecting the use of the entire barrier network. If the above oil can not be cleaned with ordinary water, it can be scrubbed with dishwashing liquid. The company mainly deals in color-coated, galvanized, stainless steel pipes, stainless steel coils, stainless steel plates of various materials; hot-rolled series of rebar, medium and heavy plates, coils, I-beams, angle steels, channel steels, H-beams and other steel products and deep processing Service. (The company’s annual inventory is more than 50,000 tons).The company adheres to the concept of “integrity first, service-oriented”, relying on the strong strength of major domestic steel groups, exerting the company’s strong resource integration capabilities, and serving and satisfying the needs of customers both in China and at abroad.Additionally, Zhishang Steel also has a powerful and professional logistics distribution system, which can provide customers with efficient, fast and flexible logistics services at any time.Our business covers Southeast Asia, the Middle East, Africa, Australia, Europe, the United States and other countries.Looking forward to the future, in order to maintain in-depth and stable cooperation with customers both at home and abroad, all employees of Zhishang Steel will work harder to provide Better products and services to create more added value for customers.

Minimum Order: 1 bags

Steel shots in the lower part of the separation box goes into the blasting components through feeding tube and driven by the motor. The high-speed rotating shot will be thrown and stroke against the surface of workpieces at the speed of 80m/s. And thus carry out clean-up operation. Under the effect of negative pressure, the shot abrasive and dust will be back into sand separation box where the shot, dust and impurities will be separated completely. Good shot materia into the blast is expected to continue to use. Dust and impurities wating to be processed have been filtered to the airtight dust box.

Minimum Order: 1 bags

The handheld automatic nailing machine is composed of the host (automatic arranging feeding device) and the nailing gun assembly. The working principle is to automatically arrange and separate the pull rivet by the vibration device, and use the compressed air as the power to automatically transport the pull rivet to the lunch gun's mouth through the pipeline. Flying effects automatic nailing machine can upgrade the traditional handmade nailing operation to automation operations. The combined robotic arm use can achieve unmanned operations, which improves work efficiency.

Minimum Order: 1 bags

Benifits • Professional blade for difficult-to-cut solid materials. • M51 tooth tips, designed to cut medium to very large work pieces with high precision. • With higher hardness up to 45HRC or tensile strength up to 1200MPa . • This blade is characterized by long blade life and extremely clean cutting surface. Features • Powder metallurgy (M51) high speed steel edge. • For difficult to cut solid materials. • Wear resistant. • Premium backing material for long fatigue life and good beam strength. • Deep gullet tooth design for better chip removal. Applications • Alloy Steel • Bearing Steel • Die Steel • Tool Steel • Stainless Steel • Titanium Alloys

The steel tube straightening machine is used for restoring the bending and distorted tubes, after restoring, the tube will be no indentation and diameter reducing. The machien is the ideal equipment for building construction companies and steel tube rental enterprise , scafflod construction unit.     The steel pipe straghtening machine is consist of straightening system , removing rust machine, and painting box. It can be used for only straightening, also for straightening and rust removing and painting at the same time. Mechnical rollers straightening , stable and durable .

Minimum Order: 1 bags

Product Description Plain steel wire mesh is a kind of wire mesh that woven from various kinds of carbon steel wires. The raw material are generally Q195, but also high tensile carbon steel wires, copper coated steel wires and other iron wire materials.It’s one of the most commonly used wire mesh alloys. Information of Jiushen Plain Steel Wire Mesh Standard: GB/T 701-2008 ASTM E2016-15 ASTM E2814-18 GB/T 2040-2008 Refer to BG/T or ISO Material: Q195, Q235, C1006, C1008, 72A, 82B, 65Mn etc. Weaving Pattern: Plain Weave, Twill Weave, Plain Dutch Weave, Twill Dutch Weave, Herringbone Weave, Reverse Dutch Weave Application Plain steel mesh is widely used in many industries, including extrusion equipment for plastic, rubber, chemical and grain industry, agriculture, filtration and separation for oil,construction and more.

Product Description Wire mesh filters, panel filter, mesh filters, cylinder filter elements, stainless steel filter, and wire cloth filter for sale with best quality and low wholesale price. The wire mesh filter is made of a variety of different types of materials, but the stainless steel mesh filter is the most common because it is ideal for corrosive environments and easy to clean. The wire mesh filter includes general filters, high efficiency filters, precision filters and many others. Material: Stainless steel mesh, Sintered mesh, Sintered felt, Special alloy materials and other high-efficiency filter materials formed by extrusion molding and welding. Filter media can range from large to small or even micron accurate. Product Category: Multi-layer sintered meah, Multi-layer welded meah, Multi- layer mesh cylinder, Net frame, Special-shaped net bucket etc. Among all filter materials, stainless mesh filters have the advantages of high strength, pressure resistance, uniform force, high temperature resistance, and high pore content in the connecting pores. High Quality Wire Mesh Filter is widely applied in various industries, such as pharmaceutical, chemical, food processing, oil refining, water treatment, scientific experiments, waste gas treatment and etc.